JMD CONNECTOR 0.5mm Emboss Tape Board-to-board connectors pitch Features------------------------ * Smooth connection Thanks to the cantilever type contacts, mating is very smooth. * Distortion preventive construction Box-shaped plug housing has the guide ribs on both ends, which prevents distortion, and offsetting the rib from the center axis provides the mating directionality. * Wide range of circuits No. of circuits available are from 20 to 100, every 10 circuiits. * Embossed taping for automatic mounting This connector is supplied in embossed tape packaging, for mounting by automatic placement machines. This connector is 0.5 mm pitch SMT type board-to-board connector with horizontal and vertical connection. Specifications ------------------- * Current rating: 0.5 A AC, DC * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 50 m max. After environmental tests/ 100 m max. * Insulation resistance: 50 M min. * Withstanding voltage: 100 VAC/minute * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 1 JMD CONNECTOR Plug -------------------------------------------------------------------- Top entry type Side entry type B C A 2.3 0.5 0.2 0.2 4.8 C 0.5 A 2.3 B 1.15 1.3 Model No. 4.5 mm Q'ty/ reel Dimensions (mm) Top entry type Circuits 5.0 mm Side entry type A B C - 20PS-JMDSS-G-1-TF 4.5 9.1 5.7 1,500 30P5.0-JMDSS-G-1-TF - 30PS-JMDSS-G-1-TF 7.0 11.6 8.2 1,500 40P5.0-JMDSS-G-1-TF - 40PS-JMDSS-G-1-TF 9.5 14.1 10.7 1,500 50P6.0-JMDSS-G-1-TF 50PS-JMDSS-G-1-TF 12.0 16.6 13.2 1,500 - 60P6.0-JMDSS-G-1-TF 60PS-JMDSS-G-1-TF 14.5 19.1 15.7 1,500 70P-JMDSS-G-1-TF - 70P6.0-JMDSS-G-1-TF 70PS-JMDSS-G-1-TF 17.0 21.6 18.2 1,500 80 80P-JMDSS-G-1-TF - - 80PS-JMDSS-G-1-TF 19.5 24.1 20.7 1,500 100 100P-JMDSS-G-1-TF - - 100PS-JMDSS-G-1-TF 24.5 29.1 25.7 1,500 20 20P-JMDSS-G-1-TF 30 - 40 40P-JMDSS-G-1-TF 50 50P-JMDSS-G-1-TF - 60 60P-JMDSS-G-1-TF 70 6.0 mm - Material and Finish Contact: Phosphor bronze, nickel-undercoated, gold-plated Housing: PA 6T, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. Receptacle --------------------------------------------------------------- Circuits 0.2 3.1 C A B 2 A B C Q'ty/ reel 20 20R-JMDSS-G-1-TF(S) 4.5 9.1 5.7 1,500 30 30R-JMDSS-G-1-TF(S) 7.0 11.6 8.2 1,500 40 40R-JMDSS-G-1-TF(S) 9.5 14.1 10.7 1,500 50 50R-JMDSS-G-1-TF(S) 12.0 16.6 13.2 1,500 60 60R-JMDSS-G-1-TF(S) 14.5 19.1 15.7 1,500 70 70R-JMDSS-G-1-TF(S) 17.0 21.6 18.2 1,500 80 80R-JMDSS-G-1-TF(S) 19.5 24.1 20.7 1,500 100 100R-JMDSS-G-1-TF(S) 24.5 29.1 25.7 1,500 Material and Finish Contact: Phosphor bronze, nickel-undercoated, gold-plated Housing: PA 6T, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 0.5 2.3 Dimensions (mm) Model No. 1.7 RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. JMD CONNECTOR Plug with polarizing key ---------------------------------------------------- Stacking height /4.5 mm A B C Q'ty/ reel 60 60P-JMDHS-GAN-1A-TF (A) 14.5 19.1 15.7 1,500 C Circuit No.1 mark Circuit No.1 Dimensions (mm) Model No. Circuits Material and Finish Contact: Phosphor bronze, nickel-underplated, gold-plated (nickel-stripe) Housing: PA 6T, UL94V-0, gray Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. The product listed above are supplied on embossed-tape. 0.2 0.5 2.3 A B Receptacle with polarizing key ---------------------------------------------- C Circuit No.1 mark Circuit No.1 Dimensions (mm) Model No. Circuits Stacking height /4.5 mm A B C Q'ty/ reel 60 60R-JMDHS-GAN-1A-TF (SA) 14.5 19.1 15.7 1,500 Material and Finish Contact: Phosphor bronze, nickel-underplated, gold-plated (nickel-stripe) Housing: PA6T, UL94V-0, gray Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. The product listed above are supplied on embossed-tape. 0.2 3.1 C 0.5 2.3 A 1.7 B 3 JMD CONNECTOR PC board layout (viewed from component side) and Assembly layout------------------ Plug: Top entry type Receptacle Top entry type 0.50.03 1.55 0.85 ( )P-JMDSS-G-1-TF : 4.5 ( )P5.0-JMDSS-G-1-TF : 5.0 ( )P6.0-JMDSS-G-1-TF : 6.0 4.3 1.4 2.9 5.8 Receptacle (5.6) 0.5 0.30.05 Plug: Side entry type 0.85 Side entry type 1.55 0.50.03 0.30.05 1.35 5.6 1.35 3.05 1.4 2.6 4.8 Note: 1. Tolerances are non-cumulative: 0.03 mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. PC board layout (viewed from component side) and Assembly layout / with polarizing key---- Plug 0.850.1 1.40.1 1.550.1 2.9 5.8 0.50.03 Top entny type 0.30.05 0.5 4.3 Receptacle 1.550.1 0.850.1 1.40.1 2.9 5.6 4.5 0.50.03 0.30.05 Note: 1. Tolerances are non-cumulative: 0.03 mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 4