2SD2406
2006-11-21
1
TOSHIBA Transistor Silicon NPN Triple Diffused Type
2SD2406
Power Amplifier Applications
• High power dissipation: PC = 25 W (Tc = 25°C)
• Good hFE linearity
Absolute Maximum Ratings (Tc = 25°C)
Characteristics Symbol Rating Unit
Collector-base voltage VCBO 80 V
Collector-emitter voltage VCEO 80 V
Emitter-base voltage VEBO 5 V
Collector current IC 4 A
Base current IB 0.4 A
Collector power dissipation
(Tc = 25°C)
PC 25 W
Junction temperature Tj 150 °C
Storage temperature range Tstg −55 to 150 °C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Unit: mm
JEDEC ―
JEITA ―
TOSHIBA 2-10R1A
Weight: 1.7 g (typ.)
2SD2406
2006-11-21
2
Electrical Characteristics (Tc = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Collector cut-off current ICBO V
CB = 80 V, IE = 0 ― ― 30 μA
Emitter cut-off current IEBO V
EB = 5 V, IC = 0 ― ― 100 μA
Collector-emitter breakdown voltage V (BR) CEO IC = 50 mA, IB = 0 80 ― ― V
Emitter-base breakdown voltage V (BR) EBO IE = 10 mA, IC = 0 5 ― ― V
hFE (1)
(Note)
VCE = 5 V, IC = 0.5 A 70 ― 240
DC current gain
hFE (2) V
CE = 5 V, IC = 3 A 15 50 ―
Collector-emitter saturation voltage VCE (sat) I
C = 3 A, IB = 0.3 A ― 0.45 1.5 V
Base-emitter voltage VBE V
CE = 5 V, IC = 3 A ― 1.0 1.5 V
Transition frequency fT V
CE = 5 V, IC = 0.5 A ― 8.0 ― MHz
Collector output capacitance Cob V
CB = 10 V, IE = 0, f = 1 MHz ― 90 ― pF
Note: hFE (1) classification O: 70 to 140, Y: 120 to 240
Marking
Lot No.
A
line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
D2406
Characteristics
indicator
Part No. (or abbreviation code)
2SD2406
2006-11-21
3
Collector-emitter voltage VCE (V)
IC – VCE
Collector current IC (A)
Base-emitter voltage VBE (V)
IC – VBE
Collector current IC (A)
Collector current IC (A)
hFE – IC
DC current gain hFE
Collector current IC (A)
VCE (sat) – IC
Collector-emitter saturation voltage
VCE (sat) (V)
Ambient temperature Ta (°C)
PC – Ta
Collector power dissipation PC (W)
Collector-emitter voltage VCE (V)
Safe Operating Area
Collector current IC (A)
4.0
0
0
Common emitter
Tc = 25°C
40
IB = 20 mA
1.0 2.0 3.0 4.0 5.0 6.0
0.8
1.6
2.4
3.2
60
80
100
120 160 200240
−25 25Tc = 75°C
4.0
0
0
Common
emitter
VCE = 5 V
0.4 0.8 1.2 1.6 2.0
1.0
2.0
3.0
−25
25
Tc = 75°C
1000
10
0.003
Common emitter
VCE = 5 V
0.01 0.03 0.1 0.3 1 3 5
30
50
100
300
500
−25 25
Tc = 75°C
3
0.03
0.003
Common emitter
IC/IB = 10
0.01 0.03 0.1 0.3 1 3 5
0.05
0.1
0.3
0.5
1
35
0
0
Tc = Ta
Infinite heat sink
25 50 75 100 125 150 175
5
10
15
20
25
30
DC operation
Tc = 25°C
100 ms*
IC max (pulsed)*
IC max (continuous) 10 ms*
1 s*
1 ms*
*: Single nonrepetitive pulse
Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
10
0.1
1
VCE max
3 10 30 100
0.3
0.5
1
3
5
2SD2406
2006-11-21
4
RESTRICTIONS ON PRODUCT USE 20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
