LITE-ON SEMICONDUCTOR MBR20200CT REVERSE VOLTAGE - 200 Volts FORWARD CURRENT - 20 Amperes SCHOTTKY BARRIER RECTIFIERS TO-220AB FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency Low leakage current High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 B L M C D A K E PIN 1 2 3 E F IEC 61000-4-2, level 4 (ESD), >15KV (air) F G MECHANICAL DATA I Case : TO-220AB molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) DIM. A B C D J N H H G H I J K L M PIN 1 PIN 2 CASE PIN 3 TO-220AB MAX. MIN. 14.22 15.88 10.67 9.65 2.54 3.43 5.84 8.26 - 6.86 9.28 12.70 6.35 14.73 2.29 0.51 0.30 3.53 3.56 2.79 1.14 0.64 4.09 4.83 1.14 1.40 2.92 2.03 N All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS MBR20200CT UNIT VRRM VRMS VDC 200 140 200 V V V I(AV) 20 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 180 A Voltage Rate of Change (Rated VR) dv/dt 10000 V/us TJ =25 C TJ =125 C TJ =25 C TJ =125 C VF 0.92 0.75 1.00 0.86 V @TJ =25 C @TJ =125 C IR 8 5 uA mA R0JC 2.0 C/W Typical Junction Capacitance per element (Note 3) CJ 250 pF Operating Temperature Range TJ -65 to +175 C TSTG -65 to +175 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (See Fig.1) Maximum Forward Voltage (Note 1) IF=10A @ IF=10A @ IF=20A @ IF=20A @ Maximum DC Reverse Current at Rated DC Blocking Voltage TC =120 C Typical Thermal Resistance (Note 2) Storage Temperature Range NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Thermal Resistance Junction to Case. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. C REV. 5, Jul-2012, KTHC22 RATING AND CHARACTERISTIC CURVES MBR20200CT FIG.2 - MAXIMUM NONREPETITIVE SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT , (A) AVERAGE FORWARD CURRENT , (A) 25 20 15 10 5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 250 200 150 100 50 8.3 ms Single Half-Sine-Wave 0 0 25 50 75 100 125 150 1 175 2 5 20 50 100 NUMBER OF CYCLES AT 60Hz TEMPERATURE , () FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT , (A) 100 1.0 TJ =125 0.1 0.01 0.001 TJ =25 10 1.0 TJ =25 Pule Width=300us 2% Duty Cycle 0.1 0.0001 0.1 0 30 60 90 120 150 0.2 0.3 0.4 0.5 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , (V) FIG.5 - TYPICAL JUNCTION CAPACITANCE 800 f=1MHz 500 TJ =25 200 100 50 20 10 0.1 0.6 180 REVERSE VOLTAGE , (V) CAPACITANCE , (PF) INSTANTANEOUS REVERSE CURRENT , (mA) 10 1 4 10 REVERSE VOLTAGE , (V) 100 1.0 1.1 Legal Disclaimer Notice MBR20200CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.