MINIATURE RELAY 2 POLES--1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES FEATURES Super miniature size: 0.2 inch x 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. Slim type for high density mounting Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements UL recognized and CSA certified Low power consumption Conforms to IEC 950 (W type only) - 2.5 mm clearance and creepage between coil and contacts -5000 V surge strength between coil and contacts (2x10s surge wave) -2000 Vrms dielectric strength between coil and contacts -UL 1950 and IEC950 (approval in process) NO TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D ORDERING INFORMATION [Example] FBR12 N (a) (b) D (c) 12 (d) -P (e) -** (-CSA) (f ) (g) (a) Series Name FBR12 : FBR12 Series (b) Enclosure & Coil Power N W H : Standard (plastic sealed type) : High dielectric strength type (plastic sealed type) : High sensitivity type (c) Coil Type D : DC coil (d) Nominal Voltage (e) Contact Material Nil -P (f) Custom Designation To be assigned custom specification (g) CSA Standard -CSA -CSA Refer to the COIL DATA CHART : Gold-overlay silver-nickel : Gold-overlay silver-palladium : UL114 + CSA recognized : UL1950 + CSA (under application) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR12ND05 Stamp: 12ND05 SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal coil voltage 3 to 24 VDC Contact rating 0.5 A 125 VDC resistive 2 A 30 VDC resistive 0.3 A 110 VAC resistive 1 FBR12 SERIES SPECIFICATIONS Item Standard (Gold-overlay silver-nickel) Standard Contact High dielectric strength type Arrangement 2 form C (DPDT) Material Gold-overlay silver-nickel Style Bifurcated Resistance (initial) Rating (resistive) -P type (Gold-overlay silver-palladium) Standard High dielectric strength type Gold-overlay silver-palladium NO Maximum 100 m (at 0.1 A 6 VDC) 0.5 A 125 VAC or 1 A 30 VDC TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D Coil Time Value Insulation Maximum Carrying Current 2 A (at 20C) Maximum Switching Power 62.5 VA or 60 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2A Minimum Switching Load*2 10 A 10 VDC (reference) Capacitance (at 10 kHz) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Nominal power (at 20C) Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Operate power (at 20C) Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Thermal Resistance at Continuous Thermal Load Approximately 115C/W Operating Temperature -40C to +85C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Maximum 4 msec. Max. Switching Frequency Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Resistance (initial) Minimum 1000 M (at 500 VDC) 1,500 1,000 VAC 750 1 minimum Dielectric between open contacts Strength adjacent contacts Surge Strength between coil and contacts 1,500 VAC 1 min. between open contacts, adjacent contacts 1,500 V 10 x 700 s between coil and contacts Life Other 2 5,000 V 2 x 10 s 2,000 VAC 1 min. 10 2,500 V 2 x 10 s DC 2 x 105 operations minimum 5,000 V 2 x 10 s AC 1 x 105 operations minimum 5 x 105 operations minimum 200 x 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3 mm) Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Resistance Misoperation 500 m/s2 (111 ms) Endurance 1,000 m/s2 ( 6 1 ms) Weight *1 700 1,500 VAC 1 min. 1 x 108 operations minimum Mechanical Electrical (at contact rating) 2,500 V 2 x 10 s 10 2,000 VAC 1 min. 2,500 1,250 Approx. 1.5 g Approx. 1.9 g Approx. 1.5 g Approx. 1.9 g If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR12 SERIES SPECIFICATIONS Item High Sensitive Type Standard (Gold-overlay silver-nickel) Contact Arrangement -P type (Gold-overlay silver-palladium) 2 form C (DPDT) Material NO Gold-overlay silver-nickel Style Gold-overlay silver-palladium Bifurcated Resistance (initial) Maximum 100 m (at 0.1 A 6 VDC) TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D Rating (resistive) Coil Time Value Insulation 0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20C) Maximum Switching Power 62.5 VA or 30 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2A Minimum Switching Load*2 10m VDC - 10 A Capacitance (at 10 kHz) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Nominal power (at 20C) Approximately 50mW Operate power (at 20C) Approximately 40m W Operating Temperature -40C to +70C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 5 msec. Release (at nominal voltage) Maximum 5 msec. Resistance (initial) Minimum 1000 M (at 500 VDC) Dielectric between open contacts Strength adjacent contacts 750 VAC 1 minute Surge Strength between coil and contacts 1,500 VAC 1 minutes between open contacts, adjacent contacts 1,500 V 10 x 700 s between coil and contacts Life Other 1 x 108 operations minimum Mechanical Electrical (at contact rating) 2,500 V 2 x 10 s DC 2 x 105 operations minimum AC 1 x 105 operations minimum 5 x 105 operations minimum 200 x 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3 mm) Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Resistance Misoperation 500 m/s2 (111 ms) Endurance 1,000 m/s2 ( 6 1 ms) Weight Approx. 1.9 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 3 FBR12 SERIES COIL DATA CHART 1.STANDARD MODEL Nominal voltage Nominal Coil current resistance (at nominal (10%) voltage) approx. Standard -P type FBR12ND03 FBR12ND03-P 3 VDC 64.3 46 mA FBR12ND04 FBR12ND04-P 4.5 VDC 145 31 mA NO Must operate1 voltage* Must operate1 voltage* Nominal power Operate power Coil temperature rise TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D FBR12ND05 FBR12ND05-P 5 VDC 178 28 mA FBR12ND06 FBR12ND06-P 6 VDC 257 23 mA FBR12ND09 FBR12ND09-P 9 VDC 579 15 mA FBR12ND12 FBR12ND12-P 12 VDC 1,028 11 mA FBR12ND24 FBR12ND24-P 24 VDC 2,880 8 mA 75% max. 10% min. Approx. W of nominal of nominal (at0.14 nominal voltage voltage voltage) Approx. 0.08 W Max. Approx. 20 deg Max. (at nominal voltage) 0.2 W 0.112 W 30 deg Nominal power Operate power Coil temperature rise Approx. 0.13 W Max. Approx. 30 deg (at nominal voltage) 0.25 W 0.14 W 33 deg Nominal power Operate power Coil temperature rise Approx. 0.04 W Max. Approx. 4 deg (at nominal voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. 2.HIGH DIELECTRIC STRENGTH MODEL Nominal voltage Nominal Coil current resistance (at nominal voltage) (10%) approx. Standard -P type FBR12WD03 FBR12WD03-P 3 VDC 39 77 mA FBR12WD04 FBR12WD04-P 4.5 VDC 88 51 mA FBR12WD05 FBR12WD05-P 5 VDC 108 46 mA FBR12WD06 FBR12WD06-P 6 VDC 156 38 mA FBR12WD09 FBR12WD09-P 9 VDC 352 25 mA FBR12WD12 FBR12WD12-P 12 VDC 626 19 mA FBR12WD24 FBR12WD24-P 24 VDC 2,304 10 mA Must operate1 voltage* Must release 1 voltage* 75% max. 10% min. Approx. W of nominal of nominal (at0.23 nominal voltage voltage voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. 3. HIGH SENSITIVITY TYPE MODEL Nominal voltage Coil resistance (10%) Standard -P type FBR12HD03 FBR12HD03-P 3 VDC 180 FBR12HD04 FBR12HD04-P 4.5 VDC 405 FBR12HD05 FBR12HD05-P 5 VDC 500 FBR12HD06 FBR12HD06-P 6 VDC 720 FBR12HD09 FBR12HD09-P 9 VDC 1,620 FBR12HD12 FBR12HD12-P 12 VDC 2,880 Must operate1 voltage* Must release1 voltage* 80% max. 10% min. Approx. W of nominal of nominal (at0.05 nominal voltage voltage voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. 4 FBR12 SERIES CHARACTERISTIC DATA Maximum switching capacity Range of operation temperature and voltage Life curve e ltag l vo coi ble wa allo 150 140 130 120 Operating voltage range 110 100 AC resistive load ( AC contact rating) DC resistive load ( DC contact rating) 2.0 Contact load current (A) 160 1.0 NO 0.5 0.3 500 Service life (operations) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115C um xim Ma Nominal voltage multiplying factor (%) (x104) 30 V DC resistive load 100 (-P)TYPE 50 125 V AC resistive load 10 5 TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D 90 80 rate t ope Mus 70 ge volta 0.2 0.1 -10 0 10 20 30 40 50 60 70 80 10 20 30 125 50 (-P)TYPE 1 0.5 200 Contact load voltage (V) Operating temperature (C) 1.0 1.5 2.0 Contact load current (A) REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time Distribution of contact resistance 100 60 80 Operate Release Operate Release 50 80 30 20 Distribution (%) Distribution (%) Distribution (%) 60 40 60 40 40 20 20 10 0 0 10 20 30 40 50 60 70 80 0 0 1 Rated coil voltage multiplying factor (%) 2 3 4 5 6 7 8 DIMENSIONS Dimensions 0 10 20 30 40 50 60 70 Schematics (BOTTOM VIEW) PC board mounting hole layout (BOTTOM VIEW) 7.2+0.3 1 3 4 5 12 10 9 8 3.2 9.7+0.3 14.6+0.4 80 Contact resistance (m) Time (ms) 5.08 0 (0.95) 0.50 5.08 0.25 (1.06) 5.08 2.54 2.54 8- o1 .00 SHOW ONE OUT OF THBSB 3 DIMENSIONS (See NA) Tube carrier 5002 15.6 Max. 10.6 Max. Unit: mm 30 pcs/Tube 5 FBR12 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com NO TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D (c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 07/26/2004. 6