MIL-DTL-83723/72E
19 August 2009
SUPERSEDING
MIL-DTL-83723/72D
15 September 2006
DETAIL SPECIFIC ATION SHEET
CONNECTOR, ELECTRIC, (CIRCUL AR, ENVIRONMENT RESISTING),
RECEPTACLE, (FLANGE MOUNT, BAYONET COUPLING, CRIMP PIN CONTACT)
(SERIES III, CLASSES A, G, M, R, T, W AND Z)
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-83723.
FIGURE 1. Dimensions and configurations.
AMSC N/A FSC 5935
INCH-POUND INCH-POUND
MIL-DTL-83723/72E
2
FIGURE 1. Dimensions and configurations - Continued.
MIL-DTL-83723/72E
3
Shell
size A C D
max F J
max K L S
+.005
-.000
8 .120 .428
.433
.312 .536
.531
.561 .594 .812 .508
10 .120 .530
.535
.388 .659
.654
.696 .719 .937 .636
12 .120 .700
.705
.558 .829
.824
.875 .812 1.031 .806
14 .120 .769
.774
.627 .898
.893
.935 .906 1.125 .875
16 .120 .869
.901
.772 1.025
1.020
1.062 .969 1.250 1.002
18 .120 1.002
1.007
.860 1.131
1.126
1.187 1.062 1.343 1.108
20 .120 1.127
1.132
.985 1.256
1.251
1.312 1.156 1.437 1.233
22 .120 1.252
1.257
1.110 1.381
1.376
1.437 1.250 1.562 1.358
24 .149 1.377
1.382
1.235 1.506
1.501
1.562 1.375 1.703 1.483
FIGURE 1. Dimensions and configurations - Continued.
MIL-DTL-83723/72E
4
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.0025
.005
.008
.015
.018
.020
.022
.032
.042
.046
.052
.065
.069
.071
.072
.076
.084
.089
.090
.094
.097
.101
.106
.112
0.06
0.13
0.20
0.38
0.46
0.51
0.56
0.81
1.07
1.17
1.32
1.65
1.75
1.80
1.83
1.93
2.13
2.26
2.29
2.39
2.46
2.57
2.69
2.84
.120
.125
.138
.144
.149
.198
.204
.211
.250
.259
.312
.366
.376
.378
.380
.388
.392
.428
.433
.490
.508
.530
.531
.535
3.05
3.18
3.51
3.66
3.78
5.03
5.18
5.36
6.35
6.58
7.92
9.30
9.55
9.60
9.65
9.86
9.96
10.87
11.00
12.45
12.90
13.46
13.49
13.59
.536
.540
.558
.560
.561
.594
.627
.636
.654
.659
.696
.700
.705
.708
.719
.728
.769
.772
.774
.806
.812
.824
.829
.860
13.61
13.72
14.17
14.22
14.25
15.09
15.93
16.15
16.61
16.74
17.68
17.78
17.91
17.98
18.26
19.49
19.53
19.61
19.66
20.47
20.62
20.93
21.06
21.84
.875
.893
.896
.898
.901
.906
.935
.937
.969
.985
1.002
1.007
1.020
1.025
1.062
1.070
1.108
1.125
1.126
1.127
1.131
1.132
1.156
1.187
22.23
22.68
22.76
22.81
22.89
23.01
23.75
23.80
24.61
25.02
25.45
25.58
25.91
26.04
26.97
27.18
28.14
28.58
28.60
28.63
28.73
28.75
29.36
30.15
1.233
1.235
1.250
1.251
1.252
1.256
1.257
1.312
1.343
1.375
1.376
1.377
1.381
1.382
1.385
1.437
1.483
1.501
1.506
1.562
1.703
31.32
31.37
31.75
31.78
31.80
31.90
31.93
33.32
34.11
34.93
34.95
34.98
35.08
35.10
35.18
36.50
37.66
38.13
38.25
39.67
43.26
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ± .005 (0.13 mm) for three place decimals,
± .01 (0.25 mm) for two place decimals and ± 1° for all angles.
4. Rear accessory interchangeability dimensions shall be accordance with SAE-AS85049.
5. The centerline of indicated projection must be located on vertical centerline ± 2°.
6. See table I for contact cavities requiring this dimension.
FIGURE 1. Dimensions and configurations - Continued.
MIL-DTL-83723/72E
5
REQUIREMENTS:
Dimensions and configuration: See figure 1.
For insert arrangements, see MIL-STD-1554 and table I.
TABLE I. Inserts requiring reduced diameters for raised seal barriers on contact cavities.
Shell
size
Insert
arrangements
Contact cavities
8 03 1, 2, and 3
10 06 1, 2, 3, 4, 5, 6
For connector accessories: See SAE-AS85049.
This connector mates with MIL-DTL-83723/75 and /77.
Part or Identifying Number (PIN) example:
M83723/ 72 W 22 55 N
Military designation
Specification sheet number
Class
Shell size
Insert arrangement
Polarizing position
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-83723, this document references the following:
MIL-DTL-83723/75
MIL-DTL-83723/77
MIL-STD-1554
SAE-AS85049
MIL-DTL-83723/72E
6
CONCLUDING MATERIAL
Custodians: Preparing activity:
Army - CR DLA - CC
Navy - AS
Air Force - 85 (Project 5935-2008-126)
DLA - CC
Review activities:
Army - AR, MI
Navy - EC
Air Force – 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above
using the ASSIST Online database at http://assist.daps.dla.mil.
