ENVIRONMENT

PROTECTION

SPECIFICATION

MODEL RS-100-3.3 RS-100-5 RS-100-12 RS-100-15 RS-100-24 RS-100-48

DCVOLTAGE

RATEDCURRENT

CURRENTRANGE

RATEDPOWER

RIPPLE&NOISE(max.) Note.2

VOLTAGERANGE

FREQUENCY RANGE

INPUT

LEAKAGECURRENT

SAFETY STANDARDS

HARMONICCURRENT

EMSIMMUNITY

DIMENSIONOTHERS

PACKING

OVERLOAD

OVERVOLTAGE

80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p

47~63Hz

74%

3.8~4.45V 5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V 55.2~64.8V

77% 81% 82% 84% 84%

2.5A/115VAC1.5A/230VAC

COLDSTART 40A/230VAC

<2mA /240VAC

110~150% ratedoutputpower

Protectiontype:Hiccupmode,recoversautomaticallyafterfaultconditionisremoved

CompliancetoEN55022(CISPR22)ClassB

10~500Hz,5G10min./1cycle,periodfor 60min.eachalongX, Y,Zaxes

159*97*38mm(L*W*H)

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

WITHSTANDVOLTAGE

ISOLATIONRESISTANCE

I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC

EMICONDUCTION&RADIATION

SAFETY &

EMC

(Note6)

MechanicalSpecification CaseNo.901CUnit:mm

StaticCharacteristics

DeratingCurve

PinNo. PinNo.

Assignment Assignment

DCOUTPUT -V

DCOUTPUT +V