https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page1/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type socket, 12-pos. with shroud, A-coded, with straight THR solder connection, contact
insert only
Your advantages
Reduced mounting costs thanks to two-piece device connector
Packaging available for automated pick and place assembly
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front
plate
Additional gasket for the device when not plugged in
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 60 pc
GTIN
GTIN 4046356533126
Weight per Piece (excluding packing) 5.330 g
Custom tariff number 85366990
Country of origin Germany
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection IP67 (correctly plugged in and locked)
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page2/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Technical data
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C 1.5 A
Rated voltage 30 V
Rated surge voltage 0.8 kV
Number of positions 12
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Overvoltage category III
Degree of pollution 3
Connection method THR solder connection
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (Installation-side)
Mounting type PCB mounting
Type of packaging Tray
Delivery state with assembly pad
Material
Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PPA
Sealing material FKM
Cable
Standards/specifications M12 connector IEC61076-2-101
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standards/specifications M12 connector IEC61076-2-101
Flammability rating according to UL 94 V0
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page3/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Schematic diagram
Pin assignment M12 socket, 12-pos., A-coded, view female side
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page6/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Classifications
eCl@ss
eCl@ss 10.0.1 27440102
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27260700
eCl@ss 5.1 27260700
eCl@ss 6.0 27279200
eCl@ss 7.0 27440103
eCl@ss 8.0 27440103
eCl@ss 9.0 27440102
ETIM
ETIM 2.0 EC001297
ETIM 3.0 EC002061
ETIM 4.0 EC002061
ETIM 5.0 EC002061
ETIM 6.0 EC002061
UNSPSC
UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 39121413
UNSPSC 18.0 39121413
UNSPSC 19.0 39121413
UNSPSC 20.0 39121413
UNSPSC 21.0 39121413
Approvals
Approvals
Approvals
EAC
Ex Approvals
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page7/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Approvals
Approval details
EAC B.01687
Accessories
Accessories
Contact insert
Sample set-SACC-CIM12FS12PL180THRSHSAMPLE-1413562
Sensor/actuator flush-type socket, 12-pos. with shroud, A-coded, with straight THR solder connection, contact insert only
Panel mounting base
Housing screw connection-SACC-M12-SCO NUT-1552243
M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and
wave soldering contact carriers
Housing screw connection-SACC-DSIV-M12-NUT-1416144
Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and
for the two-piece angled M12 contact carrier
Housing screw connection-SACC-M12-SCO NUT L 90-1432460
M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR
and wave soldering contact carriers
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page8/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Accessories
Housing screw connection-SACC-BP-F-M12/M15-6-THR-1414004
Housing screw connection, Socket, M12, Rear mounting, M15 x 1
Housing screw connection-SACC-BP-F-M12/M15-7-THR-1414003
Housing screw connection, Socket, M12, Rear mounting, M15 x 1
Housing screw connection-SACC-BP-F-M12/M15-6-THR SCO-1414020
Housing screw connection, Socket, M12-SPEEDCON, Rear mounting, M15 x 1
Housing screw connection-SACC-BP-F-M12/M15-7-THR SCO-1414005
Housing screw connection, Socket, M12-SPEEDCON, Rear mounting, M15 x 1
Housing screw connection-SACC-BP-F-M12/THR-1,0/1,8-9TIP-1419630
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 1.0 mm ... 1.8 mm thick front plates.
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page9/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Accessories
Housing screw connection-SACC-BP-F-M12/THR-1,7/2,5-9TIP-1419631
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 1.7 mm ... 2.5 mm thick front plates.
Housing screw connection-SACC-BP-F-M12/THR-2,4/3,2-9TIP-1419633
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 2.4 mm ... 3.2 mm thick front plates.
Housing screw connection-SACC-BP-F-M12/THR-3,1/3,9-9TIP-1419634
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 3.1 mm ... 3.9 mm thick front plates.
Housing screw connection-SACC-M12 NUT PRESS-1437889
Housing screw connection for two-piece M12 connectors for the reflow soldering process.
Housing screw connection-SACC-DSIV-M12-NUT-9 THR-1417989
M12 female connector, front mounting THR with M14 screw fastening
https://www.phoenixcontact.com/us/products/1442052
08/25/2020Page10/11
Flush-type connector-SACC-CI-M12FS-12CON-L180 THRSH-1442052
Accessories
Housing screw connection-SACC-BP-F-M12-THR PP-1027662
Housing screw connection, Socket, M12-Push-Pull, Rear mounting, M16, THR- und Wellenlötkontakte
Housing screw connection-SACC-FP-F-M12-THR PP-1027678
Housing screw connection, Socket, M12-Push-Pull, Front mounting, M14 x 1, THR- und Wellenlötkontakte
Plug for cable screw gland
Screw plug-PROT-M12-1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug-PROT-M12 SH-1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
Screw plug-PROT-M12 FB-1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
