UTS Hi seal Description Dynamic IP68/IP69K - Waterproof connectors in mated and unmated condition UTS Hi seal connector is a range of lightweight industrial plastic circular connectors compatible with MIL-DTL-26482 connectors. It offers Dynamic IP68/IP69K water protection in both mated & unmated conditions. Available : in 5 shell sizes, up to 21 contact arrangements with multiple polarization options. Connectors are standard supplied with preassembled handsolder contacts. For dispsolder or crimp contacts, please consult factory. Applications Benefits UTS Hi seal connector is suitable for a broad range of applications, such as Protection of electronics inside the equipments/boxes in case of maintenance, unmated conditions or cable damage * Wet & submerged environments * Instrumentation * Meteorological measurement system * Traffic control * Videosurveillance * Tunnel fans * Water measurement Intermateable and interchangeable with existing solutions * Design based on MIL-DTL-26482 connectors or equivalents such as : BS 9522 F0017, NFC93422, HE301B, VG 95328. Ideal for indoor / outdoor applications * Dynamic IP68/69K water protection (during vibration and cable mouvements) * Corrosion resistance Operational safety - ESD * Plastic shells Rapid and secure locking system * Bayonet connector and there is more. Suitable for overmoulding * Sealed insulator and contacts Respect for environment * RoHS compliant Visual identification * Coloured rings UTS Hi seal Technical characteristics Mechanical Environmental * Durability * Vibration resistance * Thermal shock 250 matings & unmatings Sinusoidal vibrations per CEI 60512-4 - from 10 to 2000 Hz 5 cycles 30 min. from -40C to 105C per MIL-STD1344 method 1003 * Operating temperature -40C to + 105C * Sealing (mated/unmated) Dynamic IP68 - under water for 1 week, 1 bar Dynamic IP69K per DIN 40050 * Salt spray 500 hours * UV resistance No mechanical degradation or important variation of color after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per ISO4892) * RoHS compliant & conform to the Chinese standard SJ/T11662006 (Chinese RoHS equivalent) Electrical * Current per contact max. * Insulation resistance * Test potential * Working voltage Size 16: 13A Size 20: 7.5A 5000 M under 500Vcc at 25C 1500 Veff between contacts size 20 2300 Veff between contacts size 16 600 V - contacts size 20 1000 V - contacts size 16 according to MIL-DTL-26482 Material * Housing + Backshell Thermoplastic UL94-V0 Contact arrangements Size 8 Size 10 2 3 3A/98 4 33 6 7 98 Contacts : 2 O 1 (#20) Contacts : 3 O 1 (#20) Contacts : 3 O 1 (#20) Contacts : 4 O 1 (#20) Contacts : 3 O 1 (#20) Contacts : 6 O 1 (#20) Contacts : 7 O 1 (#20) Contacts : 6 O 1 (#20) 10 14 Size 12 2 3 8 Contacts : 2 O 1.6 (#16) Contacts : 3 O 1.6 (#16) Contacts : 8 O 1 (#20) Contacts : 10 O 1 (#20) Contacts : 14 O 1 (#20) Size 14 Size 18* 5 12 15 18 19 11 32 30 Contacts : 5 O 1.6 (#16) Contacts : 8 O 1 (#20) 4 O 1.6 (#16) Contacts : 14 O 1 (#20) 1 O 1.6 (#16) Contacts : 18 O 1 (#20) Contacts : 19 O 1 (#20) Contacts : 11 O 1.6 (#16) Contacts : 32 O 1 (#20) Contacts : 29 O 1 (#20) 1 O 1.6 (#16) * Please consult factory UTS Hi seal Ordering information Connector family UTS UTS 7 6 JC 8 8 E E 2 2 P S - Body variation 6 Cable plug + backshell 7 Jam nut receptacle 0 Square flange receptacle Backshell : JC = Backshell (only for plug) / No digit = No backsell (only for receptacle) Shell size : 8, 10, 12, 14, 18 Contact type E = Handsolder contacts / R = Crimp contacts* / D = PC tail contacts* Insert arrangement - see previous page Contact gender : P = Pin contacts / S = Socket contacts Insert rotation : No digit = Normal / W, X, Y, Z = Different orientations - see below * Please consult factory Insert orientation - Insert rotated in body (viewed from front face of male insert) W Normal Shell size Y X 8 10 Z 12 14 18 2 3 3A(98)* 4 33 6 7* 98 3 8 10 2 14* 5 12 15 18 19 11 32 30 W 58 60 60 45 90 90 90 90 - 90 60 - 45 40 43 17 15 30 62 5 180 X 122 210 210 - - - - 180 - 112 155 - 92 90 110 90 165 119 138 193 Y - - - - - - - 240 180 203 270 - 184 - 155 180 315 241 222 285 Z - - - - - - - 270 - 292 295 - 273 - 234 270 - 340 265 350 Angle in degrees Layouts * 8-98 layout, W and X non standard ortientations / 10-7 & 12-14 layouts, X non standard orientation Range presentation Square flange receptacle with handsolder contacts C max. 4 holes OG0.1 PANEL CUT OUT Thread Shell OG0.1 E0.25 E0.25 F0.25 OD0.15 J I E0.25 B E0.25 F0.25 A max. Part numbers Shell size Male contact Female contact 8 UTS08E - - P - UTS08E - - S - 10 UTS010E - - P - 12 UTS012E - - P - A B0.15 C O D0.15 E0.25 F0.25 G0.1 O I0.10 O J0.10 21.5 2.3 11.7 12.0 15.1 21.0 3.2 15.5 12.5 UTS010E - - S - 21.5 2.3 11.7 15.0 18.3 23.8 3.2 17.3 15.1 UTS012E - - S - 21.5 2.3 11.7 19.0 20.6 26.2 3.2 21.8 18.2 14 UTS014E - - P - UTS014E - - S - 21.5 2.3 11.7 22.2 23.0 28.6 3.2 25.0 21.5 18 UTS018E - - P -* UTS018E - - S -* 21.5 2.5 11.7 28.5 27.0 33.3 3.2 31.8 27.8 Note : all dimensions are in mm UTS Hi seal Jam nut receptacle with handsolder contacts B max. D0.25 E0.3 A0.15 F0.20 PANEL CUT OUT G0.20 Nut (see tightening torque) Insert Thread O'Ring Shell size Part numbers Male contact OA B C D E F OG Tightening torque Female contact 8 UTS78E - - P - UTS78E - - S - 12.0 19.3 3.2 24.0 19.3 13.75 14.6 2 Nm 10 UTS710E - - P - UTS710E - - S - 14.9 19.3 3.2 27.0 22.2 16.5 17.7 3 Nm 12 UTS712E - - P - UTS712E - - S - 19.0 19.3 3.2 31.8 27.0 21.2 22.5 4 Nm 14 UTS714E - - P - UTS714E - - S - 22.2 19.3 3.2 34.9 30.2 24.3 25.7 5 Nm 18 UTS718E - - P -* UTS718E - - S -* 28.5 19.3 3.2 41.3 36.6 30.6 32.0 5 Nm Cable plug with handsolder contacts B min. C max. Backshell body O A max. O A max. Backshell nut O Cable range Coupling nut Hexagon D Insert Backshell Plug Part numbers Cable plug without backshell OA B O Cable range Standard seal O Cable range Reducing seal Hexagon D C UTS6 - - 8E - - S - 22.5 54.0 2.5 / 6.5 1.5 / 5.0 16.0 21.3 UTS6 - - 10E - - P - UTS6 - - 10E - - S - 26.7 63.2 2.5 / 8.0 1.5 / 5.0 18.5 23.6 UTS6 - - 12E - - P - UTS6 - - 12E - - S - 30.2 66.7 5.0 / 12.0 3.0 / 9.0 24.0 23.6 14 UTS6 - - 14E - - P - UTS6 - - 14E - - S - 35.1 71.5 7.0 / 14.0 5.0 / 12.0 26.0 23.6 18 UTS6 - - 18E - - P -* UTS6 - - 18E - - S -* 42.0 81.3 9.0/ 18.0 7.0 / 16.0 33.0 - Shell size Male contact Female contact 8 UTS6 - - 8E - - P - 10 12 Coloured ring supplied as optional extra / * Please consult factory Accessories: please refer to the UTS catalogue For further information, visit our website www.souriau-industrial.com or contact us at contactindustry@souriau.com Note : all dimensions are in mm / * Please consult factory INDUTSHSFL03EN (c) Copyright SOURIAU - All information in this publication presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. C max. Panel thickness Shell