Contents (Click on any line to jump to the page)
Cable connector categories and cable groups . . . . . . . . . . . . 2
BNC Series
M39012/16 (Straight cable plugs) . . . . . . . . . . . . . . . . . . . . . . . . . 3
M39012/17 (Straight cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . . 3
M39012/18 (Panel cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
M39012/19 (Bulkhead cable jacks). . . . . . . . . . . . . . . . . . . . . . . . . 4
M39012/20 (Right Angle cable plugs) . . . . . . . . . . . . . . . . . . . . . . 4
M39012/21 (Bulkhead jack receptacles) . . . . . . . . . . . . . . . . . . . . . 4
M39012/22 (Panel jack receptacles). . . . . . . . . . . . . . . . . . . . . . . . 5
M39012/24 (Bulkhead jack receptacles, hermetically sealed) . . . . . . . 5
M39012/25 (Dust caps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
M55339 Adapters within series . . . . . . . . . . . . . . . . . . . . . . . . . . 6
M55339 Adapters, BNC to N series . . . . . . . . . . . . . . . . . . . . . . 19
N Series
M39012/01 (Straight cable plugs) . . . . . . . . . . . . . . . . . . . . . . . . . 7
M39012/02 (Straight cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . . 7
M39012/02 (Panel cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
M39012/03 (Bulkhead cable jacks). . . . . . . . . . . . . . . . . . . . . . . . . 8
M39012/04 (Panel jack receptacles). . . . . . . . . . . . . . . . . . . . . . . . 9
M39012/04 (Bulkhead jack receptacles, hermetically sealed) . . . . . . . 9
M39012/05 (Right Angle cable plugs) . . . . . . . . . . . . . . . . . . . . . . 9
M39012/25 (Dust caps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
M55339 Adapters within series . . . . . . . . . . . . . . . . . . . . . . . . . 10
M55339 Adapters, N to BNC series . . . . . . . . . . . . . . . . . . . . . . 19
SMA Series
M39012/25 (Dust caps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
M39012/55 (Straight cable plugs) . . . . . . . . . . . . . . . . . . . . . . . . 11
M39012/56 (Right Angle cable plugs) . . . . . . . . . . . . . . . . . . . . . 12
M39012/57 (Straight cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . 12
M39012/58 (Panel cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . 13
M39012/59 (Bulkhead cable jacks). . . . . . . . . . . . . . . . . . . . . . . . 13
M39012/60 (Panel jack receptacles). . . . . . . . . . . . . . . . . . . . . . . 14
M39012/61 (Bulkhead jack receptacles) . . . . . . . . . . . . . . . . . . . . 14
TNC Series
M39012/25 (Dust caps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
M39012/26 (Straight cable plugs) . . . . . . . . . . . . . . . . . . . . . . . . 15
M39012/27 (Straight cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . 16
M39012/28 (Bulkhead cable jacks). . . . . . . . . . . . . . . . . . . . . . . . 16
M39012/29 (Panel cable jacks) . . . . . . . . . . . . . . . . . . . . . . . . . . 17
M39012/31 (Bulkhead jack receptacles) . . . . . . . . . . . . . . . . . . . . 17
M39012/32 (Panel jack receptacles). . . . . . . . . . . . . . . . . . . . . . . 18
M39012/34 (Bulkhead jack receptacles, hermetically sealed) . . . . . . 18
Cable assembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . 20
Crimp tools and dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Index by part number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Older military part numbers (CW–, MX–, UG–) . . . . . . . . . . 22
About Delta Electroncs Manufacturing . . . . . . . . . . . . . . . . 23
Delta QPL connectors and adapters meet or exceed all requirements
of MIL-PRF-39012 and MIL-PRF-55339. Because these specifications
change periodically, please visit DSCC’s website at
http://www.dscc.dla.mil for the latest requirements.
QPL connectors and adapters in BNC, N, and TNC series have silver-
plated brass bodies and gold-plated, captivated contacts.
QPL connectors in SMA series have passivated stainless-steel bodies
(except Category A cable connectors; for these types, the body tail
and sleeve are gold-plated to allow soldering of the cable braid), and
gold-plated captive contacts.
In additon to the current M39012 connectors and M55339 adapters,
we also continue to manufacture older military connectors and
adapters with CW-, MX-, and UG- nomenclature. See page 23 for a
list of these types.
MIL-PRF-39012
QPL Connectors
MIL-PRF-55339
QPL Adapters
Online Catalog Volume 1
(978)927-1060
www.DeltaRF.com
ISO9001:2008 Certified
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
2
M39012 Categories and Cable Groups
MIL-PRF-39012 Cable Groups
MIL-PRF-39012 Cable Connector Categories
MIL-PRF-39012 QPL cable connectors are divided into categories which define the characteristics of their cable assembly
method, and in some cases the actual assembly method:
Category A: Field-serviceable, with no special tools required for assembly. Our Category A connectors in series BNC, N, and
TNC are standard military-clamp types; Category A connectors in SMA series are solder type.
Category B: Special tools may be required for assembly. Our Category B connectors in N series are crimp types which use
standard, commercially-available crimp tools.
Category C: Crimp-type connectors which can be assembled with specified tools and die sizes.
Category D: Crimp-type connectors which can be assembled with specified tools and die sizes, and also have defined sizes for
crimp sleeves, contacts, and other parts. Category D connectors have crimpable center contacts.
Cable Category
M17/ A B, C, D
2-RG6 VIII VIII
6-RG11 XXC
28-RG58 VI VIA
29-RG59 VII VIIA
30-RG62 VII VIIA
54-RG122 IV IV
60-RG142 VI VIB
62-RG144 XXC
65-RG165 XXA
73-RG212 VIII VIII
74-RG213 XXA
74-RG215 XI —
75-RG214 XXB
77-RG216 XXD
78-RG217 XII XII
84-RG223 VI VIB
86-00001 XXB
Cable Category
M17/ A B, C, D
90-RG71 VII VIIB
93-RG178 II
94-RG179 II IIB
95-RG180 VV
97-RG210 VII VIIA
110-RG302 VII VIIA
111-RG303 VI VIA
112-RG304 VIII VIII
113-RG316 II IIA
119-RG174 II IIA
127-RG393 XXB
128-RG400 VI VIB
133-RG316 II IIA
152-00001 III III
155-00001 VI VIA
157-00001 IV IV
158-00001 VI VIB
Cable Category
M17/ A B, C, D
159-00001 XXA
162-00001 VIII VIII
163-00001 XXA
164-00001 XXB
165-00001 XII XII
167-00001 VI VIB
169-00001 II
170-00001 VI VIA
171-00001 VIII VIII
172-00001 II IIA
173-00001 II IIA
174-00001 XXB
175-00001 VI VIB
180-00001 VIII VIII
181-00001 XXC
183-00001 VI VIA
184-00001 VII VIIA
Cable Category
M17/ A B, C, D
185-00001 VII VIIA
187-00001 IV IV
188-00001 VIII VIII
189-00001 XXA
189-00002 XI —
190-00001 XXB
191-00001 XXD
192-00001 XII XII
194-00001 VI VIB
196-00001 II IIA
197-00001 VI VIA
198-00001 IV IV
199-00001 VIII VIII
200-00001 VI VIB
MIL-PRF-39012 Cable Group Finder
Group Cables (M17/)
I93-178,169-00001
II IIA 113-RG316, 119-RG174, 173-00001, 172-00001, 196-00001
IIB 94-RG179
III 152-00001
IV 54-RG122, 157-00001, 187-00001, 198-00001
V95-RG180
VI VIA 28-RG58, 111-RG303, 155-00001, 170-00001, 183-00001, 197-00001
VIB 60-RG142, 84-RG223, 128-RG400, 158-00001, 167-00001, 175-00001, 194-00001, 200-00001
VII VIIA 29-RG58, 30-RG62, 90-RG71, 97-RG210, 110-RG302, 184-00001, 185-00001
VIIB 90-RG71, 195-00001
VIII 2-RG6, 73-RG212, 112-RG304, 162-00001, 171-00001, 180-00001, 188-00001, 199-00001
XA 65-RG165, 74-RG213, 159-00001, 163-00001, 189-00001
XXB 75-RG214, 86-00001, 127-RG393, 164-00001, 174-00001, 190-00001
XC 6-RG11, 62-RG144, 181-00001
XD 77-RG216, 191-00001
XI 74-RG215, 189-00002
XII 78-RG217, 165-00001, 192-00001
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
3
M39012 QPL Connectors—BNC
M39012/16—BNC Straight Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/16-0101 A VI 1 1.06 .50 Silver Gold (C)A / 17
M39012/16-0102 A VII 1 1.06 .50 Silver Gold (C)A / 17
M39012/16-0103 A IV 1 1.06 .50 Silver Gold (C)A / 17
M39012/16-0111 A VI 1 1.06 .50 Silver Gold (C)A / 17
M39012/16-0118 A VII 1 1.06 .50 Silver Gold (C)A / 17
M39012/16-0220 A II 1 1.06 .50 Silver Gold (C)A / 37
M39012/16-0225 A X 2 1.66 .75 Silver Gold (C)A / 01
Figure 1
B dia.
A
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
Figure 2Figure 1
B dia.
A
B dia.
A
M39012/17—BNC Straight Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/17-0101 A VI 1 1.16 .50 Silver Gold (C)A / 17
M39012/17-0102 A VII 1 1.16 .50 Silver Gold (C)A / 17
M39012/17-0103 A IV 1 1.16 .50 Silver Gold (C)A / 17
M39012/17-0111 A VI 1 1.16 .50 Silver Gold (C)A / 17
M39012/17-0118 A VII 1 1.16 .50 Silver Gold (C)A / 17
Figure 1
A
.688
square .500
typ.
#3-56 UNF-2B B
C dia. .120 max. panel
M39012/18—BNC Panel Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B C Body Contact
Trim Code
M39012/18-0101 A VII 1 1.16 .55 .50 Silver Gold (C)A / 17
M39012/18-0102 A VI 1 1.16 .55 .50 Silver Gold (C)A / 17
M39012/18-0103 A IV 1 1.16 .55 .50 Silver Gold (C)A / 17
M39012/18-0111 A VI 1 1.16 .55 .50 Silver Gold (C)A / 17
M39012/18-0118 A VII 1 1.16 .55 .50 Silver Gold (C)A / 17
M39012/18-0220 A II 1 1.16 .55 .50 Silver Gold (C)A / 38
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
4
M39012 QPL Connectors—BNC
Figure 1
M39012/20—BNC Right Angle Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B C Body Contact
Trim Code
M39012/20-0006 C VIA 1 1.07 1.63 .50 Silver Gold (C)B / 19
M39012/20-0007 C VIB 1 1.07 1.63 .50 Silver Gold (C)B / 19
M39012/20-0101 A VI 2 1.09 1.61 .50 Silver Gold (C)A / 17
M39012/20-0102 A VII 2 1.09 1.61 .50 Silver Gold (C)A / 17
M39012/20-0108 A VII 2 1.09 1.61 .50 Silver Gold (C)A / 17
Figure 2
C dia.
B
A
C
(crimp sleeve)
B
A
M39012/21—BNC Bulkhead Receptacle
M39012 P/N Figure Dimensions Maximum Plating
ABCDE Panel Body Contact
M39012/21-0001 1 1.06 .49 .062 .410 .442 .13 Silver Gold (C)
M39012/21-0002 1 1.19 .47 .062 .348 .380 .26 Silver Gold (C)
M39012/21-0003 1 1.19 .47 .062 .410 .442 .26 Silver Gold (C)
Figure 1
AB
C (I.D.)
.500
dia.
Mounting hole
dimensions
E
dia.
D
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
Figure 1
AB
C dia.
.687
hex
Mounting hole
dimensions
.24 max. panel
.505
dia.
.473
M39012/19—BNC Bulkhead Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B C Body Contact
Trim Code
M39012/19-0101 A VI 1 1.16 .81 .50 Silver Gold (C)A / 17
M39012/19-0102 A VII 1 1.16 .81 .50 Silver Gold (C)A / 17
M39012/19-0110 A IV 1 1.16 .81 .50 Silver Gold (C)A / 17
M39012/19-0111 A VI 1 1.16 .81 .50 Silver Gold (C)A / 17
M39012/19-0118 A VII 1 1.16 .81 .50 Silver Gold (C)A / 17
M39012/19-0220 A II 1 1.16 .81 .50 Silver Gold (C)A / 17
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
5
M39012 QPL Connectors—BNC
M39012/22—BNC Panel Receptacle
M39012 P/N Figure Dimensions Maximum Plating
ABCD
Panel Body Contact
M39012/22-0001 1 1.06 .63 .062 .090 .149 Silver Gold (C)
Figure 1
A
B
D
C (I.D.)
.688
square .500
typ.
#3-56 UNF-2B
M39012/24—BNC Bulkhead Receptacle (Hermetically Sealed)
M39012 P/N Figure Dimensions Maximum Plating
ABCD
Panel Body Contact
M39012/24-0001 1 1.20 .83 .062 .687 .26 Silver Gold (C)
M39012/24-0002 2 1.20 .52 .062 .594 .26 Silver Gold (C)
Figure 1
(Rear mount)
Figure 2
(Frount Mount)
M39012/25—BNC Dust Caps
M39012 P/N Figure Dimensions Chain Plating
ABC
Type Body Contact
M39012/25-0006 1 .67 2.25 .144 Bead Silver —
M39012/25-0007 2 .67 2.70 .52 Safety Silver —
M39012/25-0008 3 .69 3.25 .281 Bead Silver —
M39012/25-0009 4 .69 3.25 .281 Safety Silver —
Figure 1 (Cap for BNC jack) Figure 2 (Cap for BNC jack)
Figure 3 (Cap for BNC plug) Figure 4 (Cap for BNC plug)
BA
C (I.D.)
A
B
C (I.D.)
A
B
C (I.D.)
A
B
C (I.D.)
(C) indicates captive contact.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
6
M55339 QPL Adapters—BNC
M55339—BNC Adapters Within Series
M55339 P/N Figure Dimensions Plating
A B C Body Contact
M55339/13-00492 1 1.53 .86 .69 Silver Gold (C)
M55339/14-00306 2 1.06 .88 — Silver Gold (C)
M55339/15-00491 3 1.22 — — Silver Gold (C)
M55339/16-00914 4 1.28 .44 — Silver Gold (C)
M55339/17-00001 5 1.50 1.06 — Silver Gold (C)
M55339/17-00002 6 1.28 .97 — Silver Gold (C)
M55339/17-00274 7 1.28 1.03 — Silver Gold (C)
Figure 1 (Bulkhead mounted jack–jack, hermetically sealed)
Figure 2
(Right angle jack–plug)
AB
.275 max. panel
C dia. Mounting hole
dimensions
.505
dia.
.473
A
B
A
B dia.
A
A
B
A
B
A
B
Figure 3 (Straight plug–plug) Figure 4 (Straight jack–jack)
Figure 5 (Tee, jack–jack–plug) Figure 6 (Tee, jack–jack–jack) Figure 7 (Tee, jack–plug–jack)
(C) indicates captive contact.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
7
M39012 QPL Connectors—N
M39012/01—N Straight Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/01-0005 A X 1 1.50 .75 Silver Gold (C)A / 01
M39012/01-0015 A XII 1 1.80 .88 Silver Gold (C)A / 01
M39012/01-0125 A XI 2 2.42 .75 Silver Gold (C)Contact Factory
M39012/01-0501 D XB 3 1.55 .60 Silver Gold (C)B / 03
M39012/01-0502 D XA 3 1.55 .60 Silver Gold (C)B / 03
M39012/01-0503 D VIB 3 1.45 .50 Silver Gold (C)B / 03
M39012/01B0007 B XA 3 1.55 .60 Silver Gold (C)B / 03
M39012/01B0008 B XB 3 1.55 .60 Silver Gold (C)B / 03
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
Figure 2Figure 1
A
B dia.
A
B dia.
M39012/02—N Straight Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/02-0003 A X 1 1.67 .75 Silver Gold (C)A / 01
M39012/02-0101 A VIII 1 1.67 .75 Silver Gold (C)A / 01
M39012/02-0501 D XB 2 1.64 .60 Silver Gold (C)B / 03
M39012/02-0502 D XA 2 1.64 .60 Silver Gold (C)B / 03
M39012/02-0503 D VIB 2 1.54 .50 Silver Gold (C)B / 03
M39012/02B0008 B XA 2 1.64 .60 Silver Gold B / 10
M39012/02B0009 B XB 2 1.64 .60 Silver Gold B / 10
A
B
(crimp sleeve)
.033 dia.
lockwire holes (3)
Figure 3 Coupling nut
detail
Figure 2Figure 1
A
B
(crimp sleeve)
A
B dia.
See next page for panel-mounted M39012/02 cable jacks.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
8
M39012 QPL Connectors—N
M39012/02—N Panel Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/02-0006 A X 1 1.67 .75 Silver Gold (C)A / 01
M39012/02-0104 A VIII 1 1.67 .75 Silver Gold (C)A / 01
M39012/02-0511 D XB 2 1.64 .60 Silver Gold (C)B / 03
M39012/02-0512 D XA 2 1.64 .60 Silver Gold (C)B / 03
M39012/02-0513 D VIB 2 1.54 .50 Silver Gold (C)B / 03
Figure 2 Flange DimensionsFigure 1
A
.66
B
(crimp sleeve)
.218 max. panel
1.00
square
.718
typ.
.125 dia. typ.
A
B dia.
.66
.218 max. panel
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
Figure 1
AB
C dia.
D dia.
Mounting hole
dimensions
.630
dia.
.536
.25 max. panel
AB
C
(crimp sleeve) D dia.
Mounting hole
dimensions
.630
dia.
.536
.25 max. panel
M39012/03—N Bulkhead Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Group A B C D Body Contact
M39012/03-0101 A VIII 1 1.75 .92 .75 .900 Silver Gold (C)A / 01
M39012/03-0102 A XII 1 1.90 .92 .88 .875 Silver Gold (C)A / 01
M39012/03-0501 D XB 2 1.84 .92 .60 .875 Silver Gold (C)B / 03
M39012/03-0502 D XA 2 1.84 .92 .60 .875 Silver Gold (C)B / 03
M39012/03-0503 D VIB 2 1.74 .92 .50 .875 Silver Gold (C)B / 03
M39012/03B0004 B XA 2 1.84 .92 .60 .875 Silver Gold (C)B / 03
M39012/03B0005 B XB 2 1.84 .92 .60 .875 Silver Gold (C)B / 03
Figure 2
Assembly
Procedure/
Trim code
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
9
M39012 QPL Connectors—N
M39012/04—N Receptacles
M39012 P/N Figure Dimensions Maximum Plating
ABCD
Panel Body Contact
M39012/04-0001 1 1.62 .707 .099 .812 .100 Silver Gold (C)
M39012/04-0002 2 1.13 .66 .100 .080 .110 Silver Gold (C)
Figure 2 (Panel jack)
AB
D
C (I.D.)
1.00
square .718
typ.
.125 dia. typ.
M39012/05—N Right Angle Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B C Body Contact
Trim Code
M39012/05-0101 A X 1 1.36 1.66 .75 Silver Gold (C)A / 07
A
B
C dia.
.033 dia.
lockwire holes (3)
Coupling nut
detail
Figure 1
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
D dia. AB
C (I.D.)
Mounting hole
dimensions
.630
dia.
.536
Figure 1 (Bulkhead jack,
hermetically sealed)
M39012/25—N Dust Caps
M39012 P/N Figure Dimensions Chain Plating
ABC
Type Body Contact
M39012/25-0011 1 .56 2.50 .144 Bead Silver —
M39012/25-0012 2 .56 3.75 .635 Safety Silver —
Figure 1 (Cap for N jack) Figure 2 (Cap for N jack)
B
C (I.D.)
A
A
B
C (I.D.)
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
10
M55339 QPL Adapters—N
M55339—N Adapters Within Series
M55339 P/N Figure Dimensions Plating
A B C Body Contact
M55339/03-00027 1 1.30 1.38 — Silver Gold (C)
M55339/04-00030 2 1.54 .86 .875 Silver Gold (C)
M55339/05-00057 3 1.59 — — Silver Gold (C)
M55339/06-00001 4 1.75 1.47 — Silver Gold (C)
M55339/06-00028 5 1.75 1.22 — Silver Gold (C)
M55339/07-00029 6 1.75 .66 — Silver Gold (C)
Figure 2 (Bulkhead mounted jack–jack, hermetically sealed)
Figure 1
(Right angle jack–plug)
A
B
ABC dia.
.25 max. panel
Mounting hole
dimensions
.630
dia.
.536
A
B dia.
A
B
A
B
A
B dia.
Figure 3
(Straight plug–plug)
Figure 6 (Straight jack–jack)
Figure 5
(Tee, jack–jack–jack)
Figure 4
(Tee, jack–plug–jack)
.033 dia.
lockwire holes (3)
Coupling nut detail
(For figures 1, 3, and 4)
(C) indicates captive contact.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
11
M39012 QPL Connectors—SMA
M39012/55—SMA Straight Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/55-3006 A I 1 .91 .67 Gold (2)Gold (C)M / 01
M39012/55-3007 A II 1 .91 .67 Gold (2)Gold (C)M / 01
M39012/55-3008 A IV 3 .94 .57 Gold (2)Gold (C)K / 12
M39012/55-3009 A VI 3 .94 .57 Gold (2)Gold (C)K / 12
M39012/55-3025 C I 1 .91 .67 Passivated Gold (C)M / 01
M39012/55-3026 C IIA 1 .97 .67 Passivated Gold (C)M / 01
M39012/55-3027 C IV 3 .94 .57 Passivated Gold (C)K / 12
M39012/55-3028 C VIB 3 .95 .57 Passivated Gold (C)K / 12
M39012/55-3029 C VIA 3 .97 .57 Passivated Gold (C)K / 12
M39012/55-3030 A III 1 .91 .67 Gold (2)Gold (C)M / 01
M39012/55-3106 A I 2 .91 .67 Gold (2)Gold (C)M / 01
M39012/55-3107 A II 2 .91 .67 Gold (2)Gold (C)M / 01
M39012/55-3108 A IV 4 .94 .57 Gold (2)Gold (C)K / 12
M39012/55-3109 A VI 4 .94 .57 Gold (2)Gold (C)K / 12
M39012/55-3125 C I 2 .91 .67 Passivated Gold (C)M / 01
M39012/55-3126 C IIA 2 .97 .57 Passivated Gold (C)M / 01
M39012/55-3127 C IV 4 .94 .57 Passivated Gold (C)K / 12
M39012/55-3128 C VIB 4 .95 .57 Passivated Gold (C)K / 12
M39012/55-3129 C VIA 4 .97 .57 Passivated Gold (C)K / 12
M39012/55-3130 A III 2 .91 .67 Gold (2)Gold (C)M / 01
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
.312 hex
AB
.250 hex
Outer sleeve(1)
.250
hex
AB
.312
hex
Outer sleeve
(1)
.020 dia.
lockwire holes (3)
AB
.312 hex
Outer sleeve(1)
(1)Category A: Solder sleeve with access hole as shown; Category C: Crimp sleeve without access hole.
(2)Coupling nut is passivated; body tail is gold plated for soldering of cable braid.
M39012/25—SMA Dust Caps
M39012 P/N Figure Dimensions Chain Plating
ABC
Type Body Contact
M39012/25-3024 1 .50 2.25 .144 Bead Passivated —
M39012/25-3025 2 .50 3.25 .281 Safety Passivated —
M39012/25-3026 3 .50 3.25 .144 Bead Passivated —
M39012/25-3027 4 .50 3.25 .281 Safety Passivated —
B
C (I.D.)
A
B
B
C (I.D.)A
A
B
C (I.D.)
A
B
C (I.D.)
Figure 2
(No lockwire holes)
Figure 1
Figure 4
(No lockwire holes)
Figure 3
.020 dia.
lockwire holes (3)
AB
.312 hex
Outer sleeve(1)
Figure 2
(Cap for
SMA jack)
Figure 4
(Cap for
SMA plug)
Figure 3
(Cap for
SMA plug)
Figure 1
(Cap for
SMA jack)
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
12
M39012 QPL Connectors—SMA
M39012/56—SMA Right Angle Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/56-3006 A I 1 .68 .55 Gold (2)Gold (C)L / 06
M39012/56-3007 A II 1 .68 .55 Gold (2)Gold (C)L / 06
M39012/56-3008 A IV 1 .76 .63 Gold (2)Gold (C)L / 01
M39012/56-3009 A VI 1 .76 .63 Gold (2)Gold (C)L / 01
M39012/56-3025 C I 1 .68 .55 Passivated Gold (C)L / 06
M39012/56-3026 C IIA 1 .74 .61 Passivated Gold (C)L / 06
M39012/56-3027 C IV 1 .68 .55 Passivated Gold (C)L / 06
M39012/56-3028 C VIB 1 .69 .56 Passivated Gold (C)L / 06
M39012/56-3029 C VIA 1 .71 .58 Passivated Gold (C)L / 06
M39012/56-3030 A III 1 .68 .55 Gold (2)Gold (C)L / 06
M39012/56-3106 A I 2 .68 .55 Gold (2)Gold (C)L / 06
M39012/56-3107 A II 2 .68 .55 Gold (2)Gold (C)L / 06
M39012/56-3108 A IV 2 .76 .63 Gold (2)Gold (C)L / 01
M39012/56-3109 A VI 2 .76 .63 Gold (2)Gold (C)L / 01
M39012/56-3125 C I 2 .68 .55 Passivated Gold (C)L / 06
M39012/56-3126 C IIA 2 .74 .61 Passivated Gold (C)L / 06
M39012/56-3127 C IV 2 .68 .55 Passivated Gold (C)L / 06
M39012/56-3128 C VIB 2 .69 .56 Passivated Gold (C)L / 06
M39012/56-3129 C VIA 2 .71 .58 Passivated Gold (C)L / 06
M39012/56-3130 A III 2 .68 .55 Gold (2)Gold (C)L / 06
A
.68.54
B
.312 hex
Outer
sleeve(1)
.020 dia.
lockwire holes (3)
AB
.312 hex
Outer
sleeve(1)
.68.54
(1) (2)See page 12 for notes.
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
M39012/57—SMA Straight Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/57-3006 A I 1 .87 .63 Gold (2)Gold (C)M / 01
M39012/57-3007 A II 1 .87 .63 Gold (2)Gold (C)M / 01
M39012/57-3008 A IV 2 .90 .53 Gold Gold (C)K / 12
M39012/57-3009 A VI 2 .90 .53 Gold Gold (C)K / 12
M39012/57-3025 C I 1 .87 .63 Passivated Gold (C)M / 01
M39012/57-3026 C IIA 1 .93 .63 Passivated Gold (C)M / 01
M39012/57-3027 C IV 2 .91 .53 Passivated Gold (C)K / 12
M39012/57-3028 C VIB 2 .91 .53 Passivated Gold (C)K / 12
M39012/57-3029 C VIA 2 .93 .53 Passivated Gold (C)K / 12
M39012/57-3030 A III 1 .87 .63 Gold (2)Gold (C)M / 01
Figure 2Figure 1
Outer
sleeve(1)
A
.312 hex
B
Outer
sleeve(1)
A
.312 hex
B
.250 hex
Figure 1 Figure 2
(No lockwire holes)
(1) (2)See page 10 for notes.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
13
M39012 QPL Connectors—SMA
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
M39012/58—SMA Panel Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/58-3006 A I 1 .87 .63 Gold (2)Gold (C)M / 01
M39012/58-3007 A II 1 .87 .63 Gold (2)Gold (C)M / 01
M39012/58-3008 A IV 2 .90 .53 Gold Gold (C)K / 12
M39012/58-3009 A VI 2 .90 .53 Gold Gold (C)K / 12
M39012/58-3025 C I 1 .87 .63 Passivated Gold (C)M / 01
M39012/58-3026 C IIA 1 .93 .63 Passivated Gold (C)M / 01
M39012/58-3027 C IV 2 .91 .53 Passivated Gold (C)K / 12
M39012/58-3028 C VIB 2 .91 .53 Passivated Gold (C)K / 12
M39012/58-3029 C VIA 2 .93 .53 Passivated Gold (C)K / 12
M39012/58-3030 A III 1 .87 .63 Gold (2)Gold (C)M / 01
Figure 2Figure 1
.325
.065
.500
sq.
.102 dia. typ.
.340
typ.
B
A
Outer
sleeve(1)
.250 hex
B
A
.325
.065
.500
sq.
.102 dia. typ.
.340
typ.
Outer
sleeve(1)
M39012/59—SMA Bulkhead Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/59-3006 A I 1 .87 .63 Gold (2)Gold (C)M / 01
M39012/59-3007 A II 1 .87 .63 Gold (2)Gold (C)M / 01
M39012/59-3008 A IV 2 .90 .53 Gold Gold (C)K / 12
M39012/59-3009 A VI 2 .90 .53 Gold Gold (C)K / 12
M39012/59-3025 C I 1 .87 .63 Passivated Gold (C)M / 01
M39012/59-3026 C IIA 1 .93 .63 Passivated Gold (C)M / 01
M39012/59-3027 C IV 2 .91 .53 Passivated Gold (C)K / 12
M39012/59-3028 C VIB 2 .91 .53 Passivated Gold (C)K / 12
M39012/59-3029 C VIA 2 .93 .53 Passivated Gold (C)K / 12
M39012/59-3030 A III 1 .87 .63 Gold (2)Gold (C)M / 01
.500
dia. .281 dia.
.266
Mounting hole
dimensions
A
.411
B
.103 max. panel
Outer
sleeve(1)
.250 hex
A
.411
B
.500
dia. .281 dia.
.266
Mounting hole
dimensions
.103 max. panel
Outer
sleeve(1)
(1)Category A: Solder sleeve with access hole as shown; Category C: Crimp sleeve without access hole.
(2)Mating thread area is passivated; body tail is gold plated for soldering of cable braid.
Figure 1
Figure 2
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
14
M39012 QPL Connectors—SMA
M39012/60—SMA Panel Jack Receptacle
M39012 P/N Figure Dimensions Plating
A B C Body Contact
M39012/60-3001 1 .500 .340 .102 Passivated Gold (C)
M39012/60-3002 2 .625 .481 .102 Passivated Gold (C)
Figure 2
.58
.375
A
square
C
dia. typ. .065
.032
(I.D.)
B(L) typ.
C
.050
dia.
.58
.375
.223
C
dia. typ. .065
.032
(I.D.)
B (L)
C
A
.050 dia.
Figure 1
.500
dia. .281 dia.
.266
Mounting hole
dimensions
B
C
A
.032
(I.D.)
.050 dia.
.162 dia.
.500
dia.
.281 dia.
.266
Mounting hole
dimensions .032
(I.D.)
.050 dia.
B
A
Figure 1 (Rear mount)
Figure 2 (Front mount)
M39012/61—SMA Bulkhead Jack Receptacle
M39012 P/N Figure Dimensions Maximum Plating
ABC
Panel Body Contact
M39012/61-3001 1 .69 .415 .062 .103 Passivated Gold (C)
M39012/61-3002 2 .69 .310 — .103 Passivated Gold (C)
(C) indicates captive contact.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
15
M39012 QPL Connectors—TNC
M39012/26—TNC Straight Plug
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/26-0010 C VIA 1 1.10 .50 Silver Gold (C)B / 19
M39012/26-0011 C VIB 1 1.10 .50 Silver Gold (C)B / 19
M39012/26-0012 C VIIA 1 1.10 .50 Silver Gold (C)B / 19
M39012/26-0013 C IV 1 1.10 .50 Silver Gold (C)B / 19
M39012/26-0014 C VIIB 1 1.10 .50 Silver Gold (C)B / 19
M39012/26-0018 A II 2 1.06 .50 Silver Gold (C)A / 17
M39012/26-0022 C IIA 1 1.04 .44 Silver Gold (C)Contact Factory
M39012/26-0023 C V 1 1.10 .50 Silver Gold (C)B / 19
M39012/26-0101 A VI 2 1.06 .50 Silver Gold (C)A / 17
M39012/26-0102 A VII 2 1.06 .50 Silver Gold (C)A / 17
M39012/26-0103 A IV 2 1.06 .50 Silver Gold (C)A / 17
Figure 2Figure 1
B dia.
A
A
B (crimp sleeve)
.027 dia.
lockwire holes (3)
Coupling nut
detail
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
M39012/25—TNC Dust Caps
M39012 P/N Figure Dimensions Chain Plating
ABC
Type Body Contact
M39012/25-0018 1 .68 3.25 .281 Bead Silver —
M39012/25-0019 2 .68 3.25 .281 Safety Silver —
M39012/25-0020 3 .70 2.25 .144 Bead Silver —
M39012/25-0021 4 .70 2.70 .515 Safety Silver —
Figure 1 (Cap for TNC plug) Figure 2 (Cap for TNC plug)
Figure 3 (Cap for TNC jack) Figure 4 (Cap for TNC jack)
A
B
C (I.D.)
A
B
C (I.D.)
B
C (I.D.)
A
B
C (I.D.)
A
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
16
M39012 QPL Connectors—TNC
M39012/27—TNC Straight Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/27-0010 C VIA 1 1.19 .50 Silver Gold (C)B / 19
M39012/27-0011 C VIB 1 1.19 .50 Silver Gold (C)B / 19
M39012/27-0012 C VIIA 1 1.19 .50 Silver Gold (C)B / 19
M39012/27-0013 C IV 1 1.19 .50 Silver Gold (C)B / 19
M39012/27-0014 C VIIB 1 1.19 .50 Silver Gold (C)B / 19
M39012/27-0018 A II 2 1.16 .50 Silver Gold (C)A / 17
M39012/27-0022 C IIA 1 1.13 .44 Silver Gold (C)Contact Factory
M39012/27-0023 C V 1 1.19 .50 Silver Gold (C)B / 19
M39012/27-0101 A VI 2 1.16 .50 Silver Gold (C)A / 17
M39012/27-0102 A VII 2 1.16 .50 Silver Gold (C)A / 17
M39012/27-0103 A IV 2 1.16 .50 Silver Gold (C)A / 17
Figure 2Figure 1
B dia.
A
A
B
(crimp sleeve)
M39012/28—TNC Bulkhead Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B C Body Contact
Trim Code
M39012/28-0010 C VIA 1 1.43 .81 .50 Silver Gold (C)B / 19
M39012/28-0011 C VIB 1 1.43 .81 .50 Silver Gold (C)B / 19
M39012/28-0012 C VIIA 1 1.43 .81 .50 Silver Gold (C)B / 19
M39012/28-0013 C IV 1 1.43 .81 .50 Silver Gold (C)B / 19
M39012/28-0014 C VIIB 1 1.43 .81 .50 Silver Gold (C)B / 19
M39012/28-0018 A II 2 1.16 .81 .50 Silver Gold (C)A / 17
M39012/28-0022 C IIA 1 1.37 .81 .44 Silver Gold (C)Contact Factory
M39012/28-0023 C V 1 1.43 .81 .50 Silver Gold (C)B / 19
M39012/28-0101 A VI 2 1.16 .81 .50 Silver Gold (C)A / 17
M39012/28-0102 A VII 2 1.16 .81 .50 Silver Gold (C)A / 17
M39012/28-0103 A IV 2 1.16 .81 .50 Silver Gold (C)A / 17
See page 2 for cable groups and category definitions. •Assembly procedures start on page 20. •(C) indicates captive contact.
Figure 2Figure 1
B
A
C
(crimp sleeve) .687
hex
.16 max. panel
AB
C dia.
.687
hex
.16 max. panel
.505
dia.
.473
Mounting hole
dimensions
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
17
M39012 QPL Connectors—TNC
M39012/31—TNC Bulkhead Receptacle
M39012 P/N Figure Dimensions Maximum Plating
ABCDE Panel Body Contact
M39012/31-0001 1 1.06 .47 .062 .410 .442 .13 Silver Gold (C)
M39012/31-0002 1 1.19 .47 .062 .348 .380 .25 Silver Gold (C)
Figure 1
AB
C (I.D.)
.500
dia.
Mounting hole
dimensions
E
dia.
D
(C) indicates captive contact.
Figure 2
Figure 1
A.55
.090
B
(crimp sleeve)
.125 max. panel
A.55
B dia. .125 max. panel
.090
.688
square
.500
typ.
#3-56 UNF-2B
Flange dimensions
M39012/29—TNC Panel Jack
M39012 P/N
Category
Cable Figure Dimensions Plating
Assembly Procedure/
Group A B Body Contact
Trim Code
M39012/29-0010 C VIA 1 1.17 .50 Silver Gold (C)B / 19
M39012/29-0011 C VIB 1 1.17 .50 Silver Gold (C)B / 19
M39012/29-0012 C VIIA 1 1.43 .50 Silver Gold (C)B / 19
M39012/29-0013 C IV 1 1.17 .50 Silver Gold (C)B / 19
M39012/29-0014 C VIIB 1 1.17 .50 Silver Gold (C)B / 19
M39012/29-0018 A II 2 1.16 .50 Silver Gold (C)A / 17
M39012/29-0022 C IIA 1 1.13 .44 Silver Gold (C)Contact Factory
M39012/29-0101 A VI 2 1.16 .50 Silver Gold (C)A / 17
M39012/29-0102 A VII 2 1.16 .50 Silver Gold (C)A / 17
M39012/29-0103 A IV 2 1.16 .50 Silver Gold (C)A / 17
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
18
M39012 QPL Connectors—TNC
M39012/32—TNC Panel Receptacle
M39012 P/N Figure Dimensions Maximum Plating
ABCD
Panel Body Contact
M39012/32-0001 1 1.06 .63 .062 .090 .125 Silver Gold (C)
Figure 1
A
B
D
C (I.D.)
.688
square .500
typ.
#3-56 UNF-2B
M39012/34—TNC Bulkhead Receptacle (Hermetically Sealed)
M39012 P/N Figure Dimensions Maximum Plating
ABCD
Panel Body Contact
M39012/34-0001 1 1.20 .83 .062 .687 .25 Silver Gold (C)
M39012/34-0002 2 1.20 .52 .062 .594 .25 Silver Gold (C)
Figure 1
(Rear mount)
Figure 2
(Frount Mount)
(C) indicates captive contact.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
19
M55339 QPL Adapters—Between Series
M55339—Adapters Between Series
M55339 P/N Figure Dimensions Plating
A B C Body Contact
M55339/01-00001 1 1.13 .75 .625 Silver Gold (C)
M55339/18-01034 2 1.48 — — Silver Gold (C)
M55339/20-00201 3 1.31 — — Silver Gold (C)
M55339/24-00335 4 1.47 .736 .080 Silver Gold (C)
M55339/25-00606 5 1.75 1.026 .812 Silver Gold (C)
M55339/49-00349 6 1.47 .625 — Silver Gold (C)
Figure 2 (BNC plug—N plug)
Figure 1 (BNC jack—N jack)
A
A
1.00
square
.718
typ.
.125 dia. typ.
AB
C
A
B
C dia.
.30 max. panel
Mounting hole
dimensions .630
dia.
.536
B dia.
A
Figure 3 (BNC jack—N plug)
Figure 6 (BNC plug—N jack)
Figure 5
(BNC jack—N jack, bulkhead mounted, pressurized)
Figure 4
(BNC plug—N jack, panel mounted)
C
B
dia.
A
(C) indicates captive contact.
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
20
Assembly Procedures
Assembly Procedure A
1) Trim cable jacket to dimension A.
Slide backnut, washer, V-gasket,
and braid clamp onto cable as
shown. Cable jacket should
bottom on step inside braid
clamp.
2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should
not overlap after folding). Trim braid wires flush with step of braid clamp. Trim cable dielectric and
center conductor to dimensions B and C.
3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear
bushing or washer (if supplied), rear insulator, and contact, and solder contact to center conductor.
Rear of contact should be flush with cable dielectric end.
4) Insert prepared cable and hardware into body and tighten backnut.
Backnut Washer
(if supplied)
V-Gasket Braid Clamp
A
Washer and/or bushing
(if supplied) Contact
Insulator
Fold braid over
B
C
Solder
Washer or bushing (if supplied)
1) Trim cable per chart. Slide crimp
sleeve back onto cable.
2) If support insulator is provided for RG-62 or 71 cable, insert into hollow in
dielectric. Solder or crimp contact onto center conductor; back of contact
flush with trimmed end of cable dielectric. Flare cut end of braid slightly by
rotating dielectric.
3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. Push
cable in until contact snaps into insulator. Slide crimp sleeve forward until flush with body
and crimp (see page 20 for hex die sizes).
Cable Trim Codes
Code A B C
A/01 .375 .047 .203
A/07 .375 .047 .125
A/17 .375 .109 .125
A/37 .281 .038 .188
A/38 .281 .069 .156
Crimp Sleeve
Contact
A
B C
Solder
Assembly Procedure B
Cable Trim Codes
Code A B C
B/03 .406 .500 .187
B/10 .280 .436 .187
B/19 .343 .437 .156
Assembly Procedure K
Crimp or solder sleeve
Solder hole
(for solder-type connectors)
AB C
.015"
Solder
Crimp or solder sleeve
Cable dielectric end
flush with insulator
1) Trim cable per chart. Slide crimp (or
solder) sleeve onto cable.
2) Solder contact onto center conductor, fixturing to maintain gap as shown. Flare cut end
of braid slightly by rotating dielectric.
3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. Push
cable in until cable dielectric bottoms in connector. Slide crimp sleeve forward until flush
with body and crimp (see page 20 for hex die sizes). (For solder-type connectors, solder
braid to body and sleeve through hole in sleeve.)
Plug body assembly and
contact shown;
procedure is identical
for jack connectors.
Cable Trim Codes
Code A B C
K/12 .281 .390 .140
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
21
Assembly Procedures
Crimp or solder sleeve
Solder hole
(for solder-type connectors)
A
B C
1) Trim cable per chart. Slide crimp
(or solder) sleeve onto cable.
2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push
cable in until end of braid touches connector body shoulder and center conductor
rests in contact slot.
Slide crimp sleeve forward until flush with body and crimp (see page 20 for hex
die sizes). (For solder-type connectors, solder braid to body and sleeve through
hole in sleeve.)
Solder center conductor into contact slot, assemble insulator disc (if supplied),
then press cap into body until seated or screw into place.
Assembly Procedure L
Crimp or solder sleeve
Solder center
conductor to
contact
Press cap in
until seated
Cap
Insulator
(if supplied)
Cable Trim Codes
Code A B C
L/01 .250 .438 .109
L/06 .281 .390 .070
Assembly Procedure M
Backnut
Contact
Insulator
Clamp
A
B C
Crimp or solder sleeve
Solder hole
(for solder-type connectors)
Solder
1) Trim cable per chart.
Slide crimp (or solder)
sleeve and backnut
onto cable.
2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all
braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is flush with front
of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor,
with contact shoulder flush with front of insulator. Solder contact to center conductor.
3) Slide crimp sleeve forward until flush with clamp shoulder; crimp as close to shoulder as
possible. (see page 20 for hex die sizes). (For solder-type connectors, solder braid to body
and sleeve through hole in sleeve.)
4) Insert prepared cable into back of body. Slide nut forward and tighten to 12–15 inch-pounds.
Cable Trim Codes
Code A B C
M/01 .281 .390 .140
Frame only—P/N M22520/5-01—Use with interchangeable dies listed below.
Hex Die Size Die Set P/N Closure
.429 hex, .400 wide M22520/5-61 A
.213 hex, .400 wide M22520/5-19 B
.255 hex, .400 wide M22520/5-19 A
.128 hex, .400 wide M22520/5-35 B
.151 hex, .400 wide M22520/5-37 B
.105 hex, .400 wide M22520/5-33 B
M22520/5-01
Crimp Tools for Flexible Cable
(978) 927-1060 • FAX (978) 922-6430 • www.deltarf.com
DELTA ELECTRONICS MANUFACTURING
22
Index by Part Number
CW-123/U
CW-155/U
CW-159/U
CW-282/U
MX-554/U
MX-913/U
MX-1142/U
MX-1143/U
UG-18/U
UG-19/U
UG-20/U
UG-21/U
UG-22/U
UG-23/U
UG-27/U
UG-28/U
UF-29/U
UG-30/U
UG-57/U
UG-58/U
UG-59/U
UG-60/U
UG-61/U
UG-83/U
UG-88/U
UG-89/U
UG-94/U
UG-95/U
UG-105/U
UG-107/U
UG-108/U
UG-146/U
UG-154/U
UG-157/U
UG-159/U
UG-160/U
UG-167/U
UG-185/U
UG-201/U
UG-202/U
UG-203/U
UG-204/U
UG-212/U
UG-220/U
UG-225/U
UG-240/U
UG-244/U
UG-253/U
UG-255/U
UG-259/U
UG-260/U
UG-261/U
UG-262/U
UG-271/U
UG-273/U
UG-274/U
UG-290/U
UG-291/U
UG-306/U
UG-309/U
UG-333/U
UG-335/U
UG-349/U
UG-352/U
UG-394/U
UG-413/U
UG-414/U
UG-421/U
UG-422/U
UG-423/U
UG-427/U
UG-447/U
UG-464/U
UG-491/U
UG-492/U
UG-493/U
UG-494/U
UG-495/U
UG-496/U
UG-532/U
UG-533/U
UG-534/U
UG-535/U
UG-536/U
UG-556/U
UG-557/U
UG-559/U
UG-560/U
UG-564/U
UG-565/U
UG-566/U
UG-567/U
UG-568/U
UG-569/U
UG-570/U
UG-571/U
UG-572/U
UG-573/U
UG-574/U
UG-589/U
UG-593/U
UG-594/U
UG-602/U
UG-603/U
UG-604/U
UG-606/U
UG-624/U
UG-625/U
UG-626/U
UG-627/U
UG-628/U
UG-629/U
UG-630/U
UG-631/U
UG-632/U
UG-633/U
UG-634/U
UG-635/U
UG-636/U
UG-637/U
UG-642/U
UG-643/U
UG-657/U
UG-680/U
UG-690/U
UG-692/U
UG-701/U
UG-702/U
UG-703/U
UG-704/U
UG-705/U
UG-706/U
UG-707/U
UG-709/U
UG-710/U
UG-909/U
UG-910/U
UG-911/U
UG-912/U
UG-913/U
UG-914/U
UG-925/U
UG-926/U
UG-927/U
UG-928/U
UG-931/U
UG-932/U
UG-935/U
UG-937/U
UG-938/U
UG-940/U
UG-941/U
UG-943/U
UG-944/U
UG-945/U
UG-959/U
UG-961/U
UG-968/U
UG-972/U
UG-973/U
UG-981/U
UG-997/U
UG-1003/U
UG-1016/U
UG-1019/U
UG-1033/U
UG-1034/U
UG-1050/U
UG-1055/U
UG-1056/U
UG-1094/U
UG-1095/U
UG-1098/U
UG-1098/U
UG-1104/U
UG-1107/U
UG-1108/U
UG-1109/U
UG-1111/U
UG-1132/U
UG-1134/U
UG-1138/U
UG-1144/U
UG-1146/U
UG-1148/U
UG-1174/U
UG-1185/U
UG-1186/U
UG-1187/U
UG-1213/U
UG-1214/U
UG-1287/U
UG-1320/U
UG-1364/U
UG-1365/U
UG-1366/U
UG-1412/U
UG-1413/U
UG-1424/U
UG-1463/U
UG-1464/U
UG-1465/U
UG-1487/U
UG-1820/U
UG-1841/U
UG-1873/U
UG-1915/U
Part Number Page
M39012/01-0005 . . . . 7
M39012/01-0015 . . . . 7
M39012/01-0125 . . . . 7
M39012/01-0501 . . . . 7
M39012/01-0502 . . . . 7
M39012/01-0503 . . . . 7
M39012/01B0007 . . . . 7
M39012/01B0008 . . . . 7
M39012/02-0003 . . . . 7
M39012/02-0006 . . . . 8
M39012/02-0101 . . . . 7
M39012/02-0104 . . . . 8
M39012/02-0501 . . . . 7
M39012/02-0502 . . . . 7
M39012/02-0503 . . . . 7
M39012/02-0511 . . . . 8
M39012/02-0512 . . . . 8
M39012/02-0513 . . . . 8
M39012/02B0008 . . . . 6
M39012/02B0009 . . . . 6
M39012/03-0101 . . . . 6
M39012/03-0102 . . . . 6
M39012/03-0501 . . . . 6
M39012/03-0502 . . . . 6
M39012/03-0503 . . . . 6
M39012/03B0004 . . . . 6
M39012/03B0005 . . . . 6
M39012/04-0001 . . . . 9
M39012/04-0002 . . . . 9
M39012/05-0101 . . . . 9
M39012/16-0101 . . . . 3
M39012/16-0102 . . . . 3
M39012/16-0103 . . . . 3
M39012/16-0111 . . . . 3
M39012/16-0118 . . . . 3
M39012/16-0220 . . . . 3
M39012/16-0225 . . . . 3
M39012/17-0101 . . . . 3
M39012/17-0102 . . . . 3
M39012/17-0103 . . . . 3
M39012/17-0111 . . . . 3
M39012/17-0118 . . . . 3
M39012/18-0101 . . . . 3
M39012/18-0102 . . . . 3
M39012/18-0103 . . . . 3
Part Number Page
M39012/18-0111 . . . . 3
M39012/18-0118 . . . . 3
M39012/18-0220 . . . . 3
M39012/19-0101 . . . . 4
M39012/19-0102 . . . . 4
M39012/19-0110 . . . . 4
M39012/19-0111 . . . . 4
M39012/19-0118 . . . . 4
M39012/19-0220 . . . . 4
M39012/20-0006 . . . . 4
M39012/20-0007 . . . . 4
M39012/20-0101 . . . . 4
M39012/20-0102 . . . . 4
M39012/20-0108 . . . . 4
M39012/21-0001 . . . . 4
M39012/21-0002 . . . . 4
M39012/21-0003 . . . . 4
M39012/22-0001 . . . . 5
M39012/24-0001 . . . . 5
M39012/24-0002 . . . . 5
M39012/25-0006 . . . . 5
M39012/25-0007 . . . . 5
M39012/25-0008 . . . . 5
M39012/25-0009 . . . . 5
M39012/25-0011 . . . . 9
M39012/25-0012 . . . . 9
M39012/25-0018 . . . 15
M39012/25-0019 . . . 15
M39012/25-0020 . . . 15
M39012/25-0021 . . . 15
M39012/25-3024 . . . 11
M39012/25-3025 . . . 11
M39012/25-3026 . . . 11
M39012/25-3027 . . . 11
M39012/26-0010 . . . 15
M39012/26-0011 . . . 15
M39012/26-0012 . . . 15
M39012/26-0013 . . . 15
M39012/26-0014 . . . 15
M39012/26-0018 . . . 15
M39012/26-0022 . . . 15
M39012/26-0023 . . . 15
M39012/26-0101 . . . 15
M39012/26-0102 . . . 15
M39012/26-0103 . . . 15
Part Number Page
M39012/27-0010 . . . 16
M39012/27-0011 . . . 16
M39012/27-0012 . . . 16
M39012/27-0013 . . . 16
M39012/27-0014 . . . 16
M39012/27-0018 . . . 16
M39012/27-0022 . . . 16
M39012/27-0023 . . . 16
M39012/27-0101 . . . 16
M39012/27-0102 . . . 16
M39012/27-0103 . . . 16
M39012/28-0010 . . . 16
M39012/28-0011 . . . 16
M39012/28-0012 . . . 16
M39012/28-0013 . . . 16
M39012/28-0014 . . . 16
M39012/28-0018 . . . 16
M39012/28-0022 . . . 16
M39012/28-0023 . . . 16
M39012/28-0101 . . . 16
M39012/28-0102 . . . 16
M39012/28-0103 . . . 16
M39012/29-0010 . . . 17
M39012/29-0011 . . . 17
M39012/29-0012 . . . 17
M39012/29-0013 . . . 17
M39012/29-0014 . . . 17
M39012/29-0018 . . . 17
M39012/29-0022 . . . 17
M39012/29-0101 . . . 17
M39012/29-0102 . . . 17
M39012/29-0103 . . . 17
M39012/31-0001 . . . 17
M39012/31-0002 . . . 17
M39012/32-0001 . . . 18
M39012/34-0001 . . . 18
M39012/34-0002 . . . 18
M39012/55-3006 . . . 11
M39012/55-3007 . . . 11
M39012/55-3008 . . . 11
M39012/55-3009 . . . 11
M39012/55-3025 . . . 11
M39012/55-3026 . . . 11
M39012/55-3027 . . . 11
Part Number Page
M39012/55-3028 . . . 11
M39012/55-3029 . . . 11
M39012/55-3030 . . . 11
M39012/55-3106 . . . 11
M39012/55-3107 . . . 11
M39012/55-3108 . . . 11
M39012/55-3109 . . . 11
M39012/55-3125 . . . 11
M39012/55-3126 . . . 11
M39012/55-3127 . . . 11
M39012/55-3128 . . . 11
M39012/55-3129 . . . 11
M39012/55-3130 . . . 11
M39012/56-3006 . . . 12
M39012/56-3007 . . . 12
M39012/56-3008 . . . 12
M39012/56-3009 . . . 12
M39012/56-3025 . . . 12
M39012/56-3026 . . . 12
M39012/56-3027 . . . 12
M39012/56-3028 . . . 12
M39012/56-3029 . . . 12
M39012/56-3030 . . . 12
M39012/56-3106 . . . 12
M39012/56-3107 . . . 12
M39012/56-3108 . . . 12
M39012/56-3109 . . . 12
M39012/56-3125 . . . 12
M39012/56-3126 . . . 12
M39012/56-3127 . . . 12
M39012/56-3128 . . . 12
M39012/56-3129 . . . 12
M39012/56-3130 . . . 12
M39012/57-3006 . . . 12
M39012/57-3007 . . . 12
M39012/57-3008 . . . 12
M39012/57-3009 . . . 12
M39012/57-3025 . . . 12
M39012/57-3026 . . . 12
M39012/57-3027 . . . 12
M39012/57-3028 . . . 12
M39012/57-3029 . . . 12
M39012/57-3030 . . . 12
M39012/58-3006 . . . 13
M39012/58-3007 . . . 13
Part Number Page
M39012/58-3008 . . . 13
M39012/58-3009 . . . 13
M39012/58-3025 . . . 13
M39012/58-3026 . . . 13
M39012/58-3027 . . . 13
M39012/58-3028 . . . 13
M39012/58-3029 . . . 13
M39012/58-3030 . . . 13
M39012/59-3006 . . . 13
M39012/59-3007 . . . 13
M39012/59-3008 . . . 13
M39012/59-3009 . . . 13
M39012/59-3025 . . . 13
M39012/59-3026 . . . 13
M39012/59-3027 . . . 13
M39012/59-3028 . . . 13
M39012/59-3029 . . . 13
M39012/59-3030 . . . 13
M39012/60-3001 . . . 14
M39012/60-3002 . . . 14
M39012/61-3001 . . . 14
M39012/61-3002 . . . 14
M55339/01-00001 . . 19
M55339/03-00027 . . 10
M55339/04-00030 . . 10
M55339/05-00057 . . 10
M55339/06-00001 . . 10
M55339/06-00028 . . 10
M55339/07-00029 . . 10
M55339/13-00492 . . . 6
M55339/14-00306 . . . 6
M55339/15-00491 . . . 6
M55339/16-00914 . . . 6
M55339/17-00001 . . . 6
M55339/17-00002 . . . 6
M55339/17-00274 . . . 6
M55339/18-01034 . . 19
M55339/20-00201 . . 19
M55339/24-00335 . . 19
M55339/25-00606 . . 19
M55339/49-00349 . . 19
Other Military Part numbers: We still manufacture a broad line of older CW-, MX-, and UG- connectors, as listed below—
for given UG numbers we can provide all letter variations (A/U, B/U, etc.).
Click on any part number to jump to the appropriate page.
QPL pdf Vol 1.1 8/09
About Delta Electronics
About Delta Electronics
Manufacturing Corporation
ISO9001:2008 Certified
Connect Here.
Connect Here.
MICROWAVE ELECTRONICS
Connect Here.
Connect Here.
Delta Electronics Mfg. Corp.
Tel: (978)927-1060 • Fax: (978)922-6430
P.O. Box 53 • 416 Cabot St.
Beverly, MA 01915 USA
Delta Microwave Electronics MFG. Corp.
Tel: +86 25 85436296 • Fax: +86 25 85436297
Room 209, Changjiang Science & Technology Park
Luxiying 97# • Nanjing 210037, China
www.DeltaRF.com
From our early New England roots to our current global manufacturing presence, we have consistently grown with,
and adapted to, the ever-changing requirements of the coaxial connector market. Beginning as a small manufacturer of
UHF-frequency connectors, our growth in product lines and manufacturing capability now positions us as a premier
connector supplier, with one of the broadest ranges of products in the industry.
Along with our product-line expansion, we recognized the need to keep pace with innovations such as Lean
Manufacturing, precision CNC turning centers, and sophisticated CAD/CAM and HFSS design-modeling
software, all geared toward providing our customers the highest-quality products available, with quick deliv-
ery and competitive prices.
As the connector market expanded in scope worldwide, we responded by developing
a global presence to better serve the needs of our customers, both domestic and international.
Our wholly-owned subsidiary in Nanjing, China provides unmatched capability to meet customer
requirements, particularly for low-cost, high-volume connector types.
In recognition of our customers’ need to streamline their processes, we have
launched our “Value Added” services, providing finished cable assemblies and integrated
connectorized components that help our customers optimize their production and
eliminate overhead.
Another “Value-Added” service is our new, fully-automated electroplating facility,
incorporating robotic handling and computerized process controls and testing,
increasing our capability to perform contract plating of a wide variety of compo-
nent parts with the same quality and consistency featured on our connectors.
Call us for all your coaxial connector needs—we make over 70 different
series to match your requirements exactly, including:
• 1.0/2.3 • 7/16 • Adapters Between Series* • BMA • BMMA • BNC*
• BNC Push-on • C • Cable assemblies • E-Line Brass SMA • GHV
• GR874 • HN • LC–LT • MC-Card • MCX • MMCX • MHV • N* • QDS
• QDL • QMA • SC • SM • SMA* • SMA 26.5 GHz • SMA 27 GHz
• SMB • SMC • SMD • SMK (2.92 MM) • SMP • SSMC • TNC*
• TPS • Triaxial BNC, C, N, TNC • Twinax BNC, HN, TNC
• Twinax HV • Twinax 3/4-20 • 75ΩBNC, TNC
• 70ΩN • UHF
*M39012/M55339 QPL available.