SMCJ16A - General Semiconductor, Inc.

SMCG AND SMCJ5.0 THRU 170CA

SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage - 5.0 - 170 Volts Peak Pulse Power - 1500 Watts

FEATURES

♦Plastic package has Underwriters

Laboratory Flammability Classification 94V-0

♦For surface mounted applications in order to optimize

board space

♦Low profile package

♦Built-in strain relief

♦Glass passivated junction

♦Low inductance

♦1500W peak pulse power capability with a 10/1000µs

waveform, repetition rate (duty cycle): 0.01%

♦Excellent clamping capability

♦Fast response time: typically less than 1.0ps from 0 Volts

to V(BR) for uni-directional and 5.0ns for bi-directional types

♦ For devices with V(BR)≥10V, IDare typically less

than 1.0µA

♦High temperature soldering guaranteed:

250°C/10 seconds at terminals

MECHANICAL DATA

Case: JEDEC DO214AB / DO215AB molded plastic over

passivated junction

Terminals: Solder plated, solderable per MIL-STD-750,

Method 2026

Polarity: For unidirectional types the color band denotes the

cathode, which is postitive with respect to the anode under

normal TVS operation

Mounting Position: Any

Weight: 0.007 ounces, 0.21 gram

DEVICES FOR BI-DIRECTIONAL APPLICATIONS

For bi-directional use add suffix C or CA for types SMC-5.0 thru SMC-170 (e.g. SMCG5.0C, SMCJ170CA).

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS VALUE UNITS

Peak pulse power dissipation with a 10/1000µs waveform (NOTES 1, 2, FIG. 1) PPPM Minimum 1500 Watts

Peak pulse current with a 10/1000µs waveform (NOTE 1, FIG. 3) IPPM SEE TABLE 1 Amps

Peak forward surge current 8.3ms single half sine-wave superimposed

on rated load (JEDEC Method) (NOTES 2, 3) - uni-directional only IFSM 200.0 Amps

Maximum instantaneous forward voltage at 100A (NOTE 3) uni-directional only VF3.5 Volts

Operating junction and storage temperature range TJ, TSTG -55 to +150 °C

NOTES:

(1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2

(2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal

(3) Measured on 8.3ms single half sine-wave. For uni-directional devices only.

Dimensions in inches and (millimeters)

DO-215AB

GULL WING

DO-214AB

MODIFIED J-BEND

0.280 (7.11)

0.260 (6.60)

0.016 (0.41)

0.006 (0.15)

0.020

(0.51)

MAX.

0.058 (1.47)

0.038 (0.97)

0.400 (10.16)

0.380 (9.64)

0.032 (8.10)

0.024 (6.10)

0.008 (0.20)

0.004 (0.10)

SEATING

PLANE

0.245 (6.22)

0.130 (5.72)

0.125 (3.17)

0.115 (2.92)

0.095 (2.41)

0.075 (1.90)

0.006 (0.152)

0.012 (0.305)

0.030 (0.76)

0.060 (1.52) 0.008 (0.203)

0.305 (7.75)

0.320 (8.13)

0.260 (6.60)

0.280 (7.11)

0.079 (2.06)

0.103 (2.62)

0.220 (5.59)

0.245 (6.22)

0.126 (3.20)

0.114 (2.90)

MAX.

1/25/99

ELECTRICALCHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1

Breakdown Maximum Maximum

Device Voltage Reverse Peak Pulse Maximum

Device Type Device Type Marking V(BR)(Volts) Test Stand-off Leakage Surge Clamping

Gull Wing Modified Code (NOTE 1) Current Voltage at VWM Current IPPM Voltage at IPPM

Lead “J” Bend Lead UNI BI (MIN / MAX) at IT(mA) VWM(Volts) (NOTE 3) ID (µA)(NOTE 2)(Amps) VC(Volts)

SMCG5.0 SMCJ5.0 GDD 6.40 / 7.82 10.0 5.0 1000 156.3 9.6

SMCG5.0A SMCJ5.0A GDE 6.40 / 7.07 10.0 5.0 1000 163.0 9.2

SMCG6.0 SMCJ6.0 GDF 6.67 / 8.15 10.0 6.0 1000 131.6 11.4

SMCG6.0A SMCJ6.0A GDG 6.67 / 7.37 10.0 6.0 1000 145.6 10.3

SMCG6.5 SMCJ6.5 GDH 7.22 / 8.82 10.0 6.5 500 122.0 12.3

SMCG6.0A SMCJ6.5A GDK 7.22 / 7.98 10.0 6.5 500 133.9 11.2

SMCG7.0 SMCJ7.0 GDL 7.78 / 9.51 10.0 7.0 200 112.8 13.3

SMCG7.0A SMCJ7.0A GDM 7.78 / 8.60 10.0 7.0 200 125.0 12.0

SMCG7.5 SMCJ7.5 GDN 8.33 / 10.2 1.0 7.5 100 104.9 14.3

SMCG7.5A SMCJ7.5A GDP 8.33 / 9.21 1.0 7.5 100 116.3 12.9

SMCG8.0 SMCJ8.0 GDQ 8.89 / 10.9 1.0 8.0 50 100.0 15.0

SMCG8.0A SMCJ8.0A GDR 8.89 / 9.83 1.0 8.0 50 110.3 13.6

SMCG8.5 SMCJ8.5 GDS 9.44 / 11.5 1.0 8.5 20 94.3 15.9

SMCG8.5A SMCJ8.5A GDT 9.44 / 10.4 1.0 8.5 20 104.2 14.4

SMCG9.0 SMCJ9.0 GDU 10.0 / 12.2 1.0 9.0 10 88.8 16.9

SMCG9.0A SMCJ9.0A GDV 10.0 / 11.1 1.0 9.0 10 97.4 15.4

SMCG10 SMCJ10 GDW 11.1 / 13.6 1.0 10.0 5.0 79.8 18.8

SMCG10A SMCJ10A GDX 11.1 / 12.3 1.0 10.0 5.0 88.2 17.0

SMCG11 SMCJ11 GDY 12.2 / 14.9 1.0 11.0 5.0 74.6 20.1

SMCG11A SMCJ11A GDZ 12.2 / 13.5 1.0 11.0 5.0 82.4 18.2

SMCG12 SMCJ12 GED 13.3 / 16.3 1.0 12.0 5.0 68.2 22.0

SMCG12A SMCJ12A GEE 13.3 / 14.7 1.0 12.0 5.0 75.4 19.9

SMCG13 SMCJ13 GEF 14.4 / 17.6 1.0 13.0 5.0 63.0 23.8

SMCG13A SMCJ13A GEG 14.4 / 15.9 1.0 13.0 5.0 69.8 21.5

SMCG14 SMCJ14 GEH 15.6 / 19.1 1.0 14.0 5.0 58.1 25.8

SMCG14A SMCJ14A GEK 15.6 / 17.2 1.0 14.0 5.0 64.7 23.2

SMCG15 SMCJ15 GEL 16.7 / 20.4 1.0 15.0 5.0 55.8 26.9

SMCG15A SMCJ15A GEM 16.7 / 18.5 1.0 15.0 5.0 61.5 24.4

SMCG16 SMCJ16 GEN 17.8 / 21.8 1.0 16.0 5.0 52.1 28.8

SMCG16A SMCJ16A GEP 17.8 / 19.7 1.0 16.0 5.0 57.7 26.0

SMCG17 SMCJ17 GEQ 18.9 / 23.1 1.0 17.0 5.0 49.2 30.5

SMCG17A SMCJ17A GER 18.9 / 20.9 1.0 17.0 5.0 54.3 27.6

SMCG18 SMCJ18 GES 20.0 / 24.4 1.0 18.0 5.0 46.6 32.2

SMCG18A SMCJ18A GET 20.0 / 22.1 1.0 18.0 5.0 51.4 29.2

SMCG20 SMCJ20 GEU 22.2 / 27.1 1.0 20.0 5.0 41.9 35.8

SMCG20A SMCJ20A GEV 22.2 / 24.5 1.0 20.0 5.0 46.3 32.4

SMCG22 SMCJ22 GEW 24.4 / 29.8 1.0 22.0 5.0 38.1 39.4

SMCG22A SMCJ22A GEX 24,4 / 26.9 1.0 22.0 5.0 42.3 35.5

SMCG24 SMCJ24 GEY 26.7 / 32.6 1.0 24.0 5.0 34.9 43.0

SMCG24A SMCJ24A GEZ 26.7 / 29.5 1.0 24.0 5.0 38.6 38.9

SMCG26 SMCJ26 GFD 28.9 / 35.3 1.0 26.0 5.0 32.2 46.6

SMCG26A SMCJ26A GFE 28.9 / 31.9 1.0 26.0 5.0 35.6 42.1

SMCG28 SMCJ28 GFF 31.1 / 38.0 1.0 28.0 5.0 30.0 50.0

SMCG28A SMCJ28A GFG 31.1 / 34.4 1.0 28.0 5.0 33.0 45.4

SMCG30 SMCJ30 GFH 33.3 / 40.7 1.0 30.0 5.0 28.0 53.5

SMCG30A SMCJ30A GFK 33.3 / 36.8 1.0 30.0 5.0 31.0 48.4

SMCG33 SMCJ33 GFL 36.7 / 44.9 1.0 33.0 5.0 25.4 59.0

SMCG33A SMCJ33A GFM 36.7 / 40.6 1.0 33.0 5.0 28.1 53.3

SMCG36 SMCJ36 GFN 40.0 / 48.9 1.0 36.0 5.0 23.3 64.3

SMCG36A SMCJ36A GFP 40.0 / 44.2 1.0 36.0 5.0 25.8 58.1

SMCG40 SMCJ40 GFQ 44.4 / 54.3 1.0 40.0 5.0 21.0 71.4

SMCG40A SMCJ40A GFR 44.4 / 49.1 1.0 40.0 5.0 23.3 64.5

SMCG43 SMCJ43 GFS 47.8 / 58.4 1.0 43.0 5.0 19.6 76.7

SMCG43A SMCJ43A GFT 47.8 / 52.8 1.0 43.0 5.0 21.6 69.4

SMCG45 SMCJ45 GFU 50.0 / 61.1 1.0 45.0 5.0 18.7 80.3

SMCG45A SMCJ45A GFV 50.0 / 55.3 1.0 45.0 5.0 20.6 72.7

SMCG48 SMCJ48 GFW 53.3 / 65.1 1.0 48.0 5.0 17.5 85.5

SMCG48A SMCJ48A GFX 53.3 / 58.9 1.0 48.0 5.0 19.4 77.4

SMCG51 SMCJ51 GFY 56.7 / 69.3 1.0 51.0 5.0 16.5 91.1

SMCG51A SMCJ51A GFZ 56.7 / 62.7 1.0 51.0 5.0 18.2 82.4

GDD

GDE

GDF

GDG

BDH

BDK

GDL

GDM

BDN

BDP

BDG

BDR

BDS

BDT

BDU

BDV

BDW

BDX

GDY

GDZ

BED

BEE

GEF

GEG

BEH

BEK

BEL

BEM

GEN

GEP

GEQ

GER

BES

BET

BEU

BEV

BEW

BEX

BEY

BEZ

BFD

BFE

BFF

BFG

BFH

BFK

BFL

BFM

BFN

BFP

BFQ

BFR

BFS

BFT

GFU

GFV

GFW

GFX

GFY

GFZ

ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 (Cont’d)

Breakdown Maximum Maximum

Device Voltage Reverse Peak Pulse Maximum

Device Type Device Type Marking V(BR)(Volts) Test Stand-off Leakage Surge Clamping

Gull Wing Modified Code (NOTE 1) Current Voltage at VWM Current IPPM Voltage at IPPM

Lead “J” Bend Lead UNI BI (MIN / MAX) at IT(mA) VWM (Volts) (NOTE 3) ID (µA) (NOTE 2) (Amps) VC(Volts)

SMCG54 SMCJ54 GGD 60.0 / 73.3 1.0 54.0 5.0 15.6 96.3

SMCG54A SMCJ54A GGE 60.0 / 66.3 1.0 54.0 5.0 17.2 87.1

SMCG58 SMCJ58 GGF 64.4 / 78.7 1.0 58 5.0 14.6 103

SMCG58A SMCJ58A GGG 6.4.4 / 71.2 1.0 58 5.0 16.0 93

SMCG60 SMCJ60 GGH 66.7 / 81.5 1.0 60 5.0 14.0 107

SMCG60A SMCJ60A GGK 66.7 / 73.7 1.0 60 5.0 15.5 96

SMCG64 SMCJ64 GGL 71.1 / 86.9 1.0 64 5.0 13.2 114

SMCG64A SMCJ64A GGM 71.1 / 78.6 1.0 64 5.0 14.6 103

SMCG70 SMCJ70 GGN 77.8 / 95.1 1.0 70 5.0 12.0 125

SMCG70A SMCJ70A GGP 77.8 / 86.0 1.0 70 5.0 13.3 113

SMCG75 SMCJ75 GGQ 83.3 / 102 1.0 75 5.0 11.2 134

SMCG75A SMCJ75A GGR 83.3 / 92.1 1.0 75 5.0 12.4 121

SMCG78 SMCJ78 GGS 86.7 / 106 1.0 78 5.0 10.8 139

SMCG78A SMCJ78A GGT 86.7 / 95.8 1.0 78 5.0 11.9 126

SMCG85 SMCJ85 GGU 94.4 / 115 1.0 85 5.0 9.9 151

SMCG85A SMCJ85A GGV 94.4 / 104 1.0 85 5.0 10.9 137

SMCG90 SMCJ90 GGW 100 / 122 1.0 90 5.0 9.4 160

SMCG90A SMCJ90A GGX 100 / 111 1.0 90 5.0 10.3 146

SMCG100 SMCJ100 GGY 111 / 136 1.0 100 5.0 8.4 179

SMCG100A SMCJ100A GGZ 111 / 123 1.0 100 5.0 9.3 162

SMCG110 SMCJ110 GHD 122 / 149 1.0 110 5.0 7.7 196

SMCG110A SMCJ110A GHE 122 / 135 1.0 110 5.0 8.5 177

SMCG120 SMCJ120 GHF 133 / 163 1.0 120 5.0 7.0 214

SMCG120A SMCJ120A GHG 133 / 147 1.0 120 5.0 7.8 193

SMCG130 SMCJ130 GHH 144 / 176 1.0 130 5.0 6.5 231

SMCG130A SMCJ130A GHK 144 / 159 1.0 130 5.0 7.2 209

SMCG150 SMCJ150 GHL 16.7 / 204 1.0 150 5.0 5.6 268

SMCG150A SMCJ150A GHM 167 / 185 1.0 150 5.0 6.2 243

SMCG160 SMCJ160 GHN 178 / 218 1.0 160 5.0 5.2 287

SMCG160A SMCJ160A GHP 178 / 197 1.0 160 5.0 5.8 259

SMCG170 SMCJ170 GHQ 189 / 231 1.0 170 5.0 4.9 304

SMCG170A SMCJ170A GHR 189 / 209 1.0 170 5.0 5.5 275

N0TES:

(1) V(BR) measured after ITapplied for 300µs square wave pulse or equivalent

(2) Surge current waveform per Fig. 3 and derate per Fig. 2

(3) For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled

(4) For the bi-directional SMCG/SMCJ5.0CA, the maximum V(BR) is 7.25 Volts

(5) All terms and symbols are consistent with ANSI/IEEE C62.35

APPLICATION N0TES

These surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large sur-

face contact for good heat dissipation, and a low resistance path for surge current flow to ground. These high speed transient voltage

suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices.

A 1500W (SMC) device is normally selected when the threat of transients is from lightning-induced transients conducted via external

leads or I/0 lines. It is also used to protect against switching transients induced by large coils or industrial motors.

System impedance at component level in a system is usually high enough to limit the current to within the peak pulse current (IPP)

rating of this series.

RECOMMENDED PAD SIZES

The pad dimensions should be 0.010” (0.25mm) longer than the contact size, in the lead axis.

This allows a solder fillet to form, see figure below. Contact factory for soldering methods.

0.310" (7.87)

0.125" (3.17)

0.050" (1.27)

0.190" (4.83)

0.125" (3.17)

0.070" (1.78)

MODIFIED J-BEND

GULL- WING

GGD

GGE

GGF

GGG

GGH

GGK

GGL

GGM

GGN

GGP

GGQ

GGR

GGS

GGT

GGU

GGV

GGW

GGX

GGY

GGZ

GHD

GHE

GHF

GHG

GHH

GHK

GHL

GHM

GHN

GHP

GHQ

GHR

MAXIMUM RATINGS AND CHARACTERISTIC CURVES SMCG AND SMCJ5.0 THRU 170CA

FIG. 1 - PEAK PULSE POWER RATING CURVE

PPPM, PEAK PULSE POWER, kW

td, PULSE WIDTH, sec. TA, AMBIENT TEMPERATURE, °C

FIG. 4 - TYPICAL JUNCTION CAPACITANCE

UNI-DIRECTIONAL

FIG. 3 - PULSE WAVEFORM

t, TIME, ms

VWM, REVERSE STAND-OFF VOLTAGE,

VOLTS

VWM, STAND-OFF VOLTAGE, VOLTS

NUMBER OF CYCLES AT 60 HZ

IPPM PEAK PULSE CURRENT, % IRSM

PEAK PULSE POWER (PPP) or CURRENT (IPP)

DERATING IN PERCENTAGE, %

CJ, CAPACITANCE, pF

CJ, JUNCTION CAPACITANCE, pF

IFSM, PEAK FORWARD SURGE CURRENT,

AMPERES

NON-REPETITIVE

PULSE WAVEFORM

SHOWN in FIG. 3

TA=25°C

TJ=25°C PULSE WIDTH (td)

is DEFINED as the POINT

WHERE the PEAK

CURRENT DECAYS

to 50% of IPPM

tr=10µsec. MEASURED at

ZERO BIAS

VR, MEASURED

at STAND-OFF

VOLTAGE, VWM

8.3ms SINGLE HALF SINE-WAVE

(JEDEC Method)

UNIDIRECTIONAL ONLY

HALF VALUE - IPP

10/1000µsec. WAVEFORM

as DEFINED by R.E.A.

FIG. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD

SURGE CURRENT

PEAK VALUE

IPPM

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

BI-DIRECTIONAL

FIG. 2 - PULSE DERATING CURVE

TJ=25°C

f=1.0 MHZ

Vsig=50mVp-p

TJ=25°C

f=1.0 MHZ

Vsig=50mVp-p

0.31 X 0.31” (8.0 X 8.0mm) COPPER PAD AREAS

MEASURED at

ZERO BIAS

MEASURED at

STAND-OFF

VOLTAGE, VWM

MAXIMUM RATINGS AND CHARACTERISTIC CURVES SMCG AND SMCJ5.0 THRU 170CA

25 50 75 100 125 150 175

0.5

1.0

1.5

2.0

FIG. 7 - MAXIMUM CONTINUOUS POWER DISSIPATION

TL, LEAD TEMPERATURE, °C

PM(AV), AVERAGE POWER DISSIPATION,

WATTS

60 HZ

RESISTIVE OR

INDUCTIVE LOAD