Semiconductor Components Industries, LLC, 2000
October, 2000 – Rev. 2 1Publication Order Number:
MBR0530T1/D
MBR0530T1, MBR0530T3
Preferred Devices
Surface Mount
Schottky Power Rectifier
Plastic SOD–123 Package
...using the Schottky Barrier principle with a large area
metal–to–silicon power diode. Ideally suited for low voltage, high
frequency rectification or as free wheeling and polarity protection
diodes in surface mount applications where compact size and weight
are critical to the system. This package also provides an easy to work
with alternative to leadless 34 package style. These state–of–the–art
devices have the following features:
•Guardring for Stress Protection
•Low Forward Voltage
•125°C Operating Junction Temperature
•Epoxy Meets UL94, VO at 1/8″
•Package Designed for Optimal Automated Board Assembly
Mechanical Characteristics
•Reel Options: MBR0530T1 = 3,000 per 7″ reel/8 mm tape
Reel Options: MBR0530T3 = 10,000 per 13″ reel/8 mm tape
•Device Marking: B3
•Polarity Designator: Cathode Band
•Weight: 11.7 mg (approximately)
•Case: Epoxy, Molded
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
30 V
Average Rectified Forward Current
(Rated VR, TL = 100°C) IF(AV) 0.5 A
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
IFSM 5.5 A
Storage Temperature Range Tstg –65 to +125 °C
Operating Junction Temperature TJ–65 to +125 °C
Voltage Rate of Change (Rated VR) dv/dt 1000 V/s
Device Package Shipping
ORDERING INFORMATION
MBR0530T1 SOD–123
http://onsemi.com
SOD–123
CASE 425
STYLE 1
3000/Tape & Reel
SCHOTTKY BARRIER
RECTIFIER
0.5 AMPERES
30 VOLTS
Preferred devices are recommended choices for future use
and best overall value.
MBR0530T3 SOD–123 10,000/Tape & Reel
MARKING DIAGRAM
B3
B3 = Device Code
MBR0530T1, MBR0530T3
http://onsemi.com
2
THERMAL CHARACTERISTICS
Rating Symbol Value Unit
Thermal Resistance — Junction to Ambient (Note 1.) RθJA 206 °C/W
Thermal Resistance — Junction to Lead RθJL 150 °C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 2.)
(iF = 0.1 Amps, TJ = 25°C)
(iF = 0.5 Amps, TJ = 25°C)
vF0.375
0.43
Volts
Maximum Instantaneous Reverse Current (Note 2.)
(Rated dc Voltage, TC = 25°C)
(VR = 15 V, TC = 25°C)
IR130
20
µA
1. 1 inch square pad size (1 x 0.5 inch for each lead) on FR4 board.
2. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤2%.
1
0.1
0.01
0.15
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage
0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
10
4
1000
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current
5 101520 30354025
100
10
1
0
TJ = 125°C 75°C 25°C -40°C75°C
25°C
IR, REVERSE CURRENT (A)µ
180
160
20
VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Typical Capacitance
5101520 3025
140
120
100
0
TYPICAL CAPACITANCE AT 0 V = 170 pF
C, CAPACITANCE (pF)
40
60
80
TJ = 125°C
MBR0530T1, MBR0530T3
http://onsemi.com
3
1
0.875
0
LEAD TEMPERATURE (°C)
Figure 4. Current Derating (Lead)
67 74 81 88 13095
0.75
0.625
0.5
60
AVERAGE FORWARD CURRENT (AMP)
0.125
0.25
0.375
123116109102
DC
SQUARE WAVE
= π
= 5
= 10
Ipk/Iav = 20
0.35
0.315
0
IF(AV), AVERAGE FORWARD CURRENT (AMP)
Figure 5. Power Dissipation
0.1 0.2 0.3 0.4 0.80.5
0.28
0.245
0.21
0
0.105
0.14
0.175
0.70.6
DC
SQUARE WAVE
= π
= 5
= 10
Ipk/Iav = 20
0.07
0.035
PF(AV), AVERAGE POWER DISSIPATION (WATT)
TJ = 125°C
RECOMMENDED FOOTPRINT FOR SOD–123
SOD–123
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
mm
inches
0.91
0.036
1.22
0.048
2.36
0.093
4.19
0.165
MBR0530T1, MBR0530T3
http://onsemi.com
4
PACKAGE DIMENSIONS
SOD–123
PLASTIC
CASE 425–04
ISSUE C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 1:
PIN 1. CATHODE
2. ANODE
ÂÂÂ
ÂÂÂ
B
D
K
AC
E
J
1
2
H
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.055 0.071 1.40 1.80
B0.100 0.112 2.55 2.85
C0.037 0.053 0.95 1.35
D0.020 0.028 0.50 0.70
E0.004 --- 0.25 ---
H0.000 0.004 0.00 0.10
J--- 0.006 --- 0.15
K0.140 0.152 3.55 3.85
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly , any claim of personal injury or death associated with such unintended or unauthori zed use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MBR0530T1/D
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
