MIL-DTL-24308/5M
w/AMENDMENT 1
3
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Accommodates a .040 (1.02) diameter pin.
4. Use .041/.039 (1.04/.99) diameter pin.
5. Patent notice. The gov ernment has a royalty free license under the U.S. Patent s l isted below for t he benefit of
manufacturer s of the items disclosed and described herei n, either for the g overnment of f or use in equipment
delivered to the government .
2790153 expires April 23, 1974
3110093 expires November 12, 1980
3158424 expires November 24, 1981
6. Copyright notice. All information di s closed in this military spec i fication sheet which is or m ay be copyrighted by
ITT Cannon Electric is repro duced herein with the express permission of the copyright owner.
7. Indentati on on the ends of t he termination side of the shell, for the purpos e of securing the insulator in the
shell, is permi tted. This ma y result in the “F” dimension being undersized in these areas. However the “F”
dimension shall be maintained for the remainder of the connector.
8. See table II f or supersessio n data.
9. Detail B is i nac tive for new des i gn, use detail C.
.125 3.18
FIGURE 1. Shell, receptacle - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-09-15T10:49Z
Check the source to verify that this is the current version before use.