8 TM 3M 7 6 5 4 3 2 1 NOTES ROUND CONDUCTOR FLAT CABLE, HF365 SERIES * LOW SMOKE ZERO HALOGEN (LSZH) INSULATION. ADVANTAGES OF LSZH INSULATION ARE THE LOW SMOKE (IEC 61034-2-2005) AND LOW TOXICITY OF COMBUSTION GASES (NF X 70-100-2-2006), REDUCING THE RISK TO FIREFIGHTERS AND REDUCING THE SOOT AND CORROSION DAMAGE TO NEARBY EQUIPMENT. .050" 28 AWG STRANDED, HALOGEN FREE PO * 28 AWG WIRE ON .050 INCH CENTERS PERMITS MASS TERMINATION TO BROAD LINE OF IDC CONNECTORS. 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. * ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATION. DIM. "A" D 1. REGULATORY INFORMATION: VISIT 3M.com/regs OR CONTACT YOUR 3M REPRESENTATIVE TO FIND THE RoHS COMPLIANCE STATUS OF THE 3M PART YOU ARE INTERESTED IN. D DIM. "B" TABLE 1 1.27 DIM. "A" DIM. "B" 04 06 08 09 10 11 12 14 15 16 18 20 24 25 26 30 34 36 37 40 44 50 60 64 HF365/04 HF365/06 HF365/08 HF365/09 HF365/10 HF365/11 HF365/12 HF365/14 HF365/15 HF365/16 HF365/18 HF365/20 HF365/24 HF365/25 HF365/26 HF365/30 HF365/34 HF365/36 HF365/37 HF365/40 HF365/44 HF365/50 HF365/60 HF365/64 .200+/-.010 [5.08] .300+/-.010 [7.62] .400+/-.010 [10.16] .450+/-.010 [11.43] .500+/-.010 [12.70] .550+/-.010 [13.97] .600+/-.010 [15.24] .700+/-.010 [17.78] .750+/-.010 [19.05] .800+/-.015 [20.32] .900+/-.015 [22.88] 1.000+/-.015 [25.40] 1.200+/-.015 [30.48] 1.250+/-.015 [31.75] 1.300+/-.015 [33.02] 1.500+/-.020 [38.10] 1.700+/-.020 [43.18] 1.800+/-.020 [45.72] 1.850+/-.020 [46.99] 2.000+/-.020 [50.80] 2.200+/-.020 [55.88] 2.500+/-.020 [63.50] 3.000+/-.020 [76.20] 3.200+/-.020 [81.28] .150+/-.007 [3.81] .250+/-.007 [6.35] .350+/-.007 [8.89] .400+/-.007 [10.16] .450+/-.007 [11.43] .500+/-.007 [12.70] .550+/-.007 [13.97] .650+/-.007 [16.51] .700+/-.007 [17.78] .750+/-.011 [19.05] .850+/-.011 [21.59] .950+/-.011 [24.13] 1.150+/-.011 [29.21] 1.200+/-.011 [30.48] 1.250+/-.011 [31.75] 1.450+/-.015 [36.83] 1.650+/-.015 [41.91] 1.750+/-.015 [44.45] 1.800+/-.015 [45.72] 1.950+/-.015 [49.53] 2.150+/-.015 [54.61] 2.450+/-.015 [62.23] 2.950+/-.015 [74.93] 3.150+/-.015 [80.01] 0.05 TYP. .035 .003 0.89 28 AWG 7 X 36 (7 X .127) TINNED STRANDED COPPER CONDUCTORS 0.08 HALOGEN FREE PO C NOTE: BLUE MARKING ON ONE EDGE OF CABLE DESIGNATES WIRE #1. 2 PHYSICAL: JACKET MATERIAL: HALOGEN FREE POLYOLEFIN (PO) COLOR: DARK GRAY 2 .127] TINNED STRANDED COPPER ELECTRICAL: VOLTAGE RATING: USA 300V CANADIAN 150V 10 INSULATION RESISTANCE: >1 X 10 /10ft. [3m] B DRAWING NUMBER MARKING: STANDARD: NONE CONDUCTORS: 28 AWG 7 X 36AWG [7 X CHARACTERISTIC IMPEDANCE: CAPACITANCE: INDUCTANCE: PROPAGATION DELAY: VELOCITY OF PROPAGATION: UNBALANCED 100 15.0 pF/ft [49.2 pF/m] .15 H/ft [.49 H/m] 1.51 ns/ft [4.95 ns/m] 68% EU: <50V ORDERING INFORMATION HF365/XX XX BALANCED 168 8.4 pF/ft [27.7 pF/m] .24 H/ft [.79 H/m] 1.42 ns/ft [4.66 ns/m] 72% B BLANK= STANDARD SF= SPLICE FREE No. OF CONDUCTORS: (SEE TABLE 1) NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. BALANCED IS MEASURED BETWEEN CONDUCTORS WITHIN A PAIR. ENVIRONMENTAL: 2 C TEMPERATURE RATING: -40 C TO 105 C (EIA-364-32G, METHOD A, TEST CONDITION 2) -10 C TO +105 C (UL TEMPERATUE RATING) NOTE: AVAILABLE IN STANDARD 100FT OR 300FT ROLLS. PLEASE SPECIFY WHEN ORDERING. CONTACT 3M FOR AVAILABILITY OF ADDITIONAL CONDUCTOR COUNTS AND/OR CUSTOM ROLL LENGTHS. FLAMMABILITY RATING: UL: HORIZONTAL A HALOGEN FREE IS DEFINED AS BOTH 1) NO HALOGN COMPOUNDS THAT ARE INTENTIONALLY ADDED TO THE PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT AND 2) ANY IMPURITIES PRESENT ARE LESS THAN 900ppm BROMINE, LESS THAN 900ppm CHLORINE AND/OR LESS THAN 1500ppm TOTAL BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTIAN INDUSTRY STANDARDS FOR PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21 STANDARDS. THIS INFORMATION REPRESENTS 3M'S KNOWLEDGE AND BELIEF WHICH MAY BE BASED IN WHOLE OR IN PART ON INFORMATION PROVIDED BY 3RD PARTY SUPPLIERS TO 3M. C 79052 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES REV DO NOT SCALE DRAWING R 8 UL FILE NO: E42769 STYLE NO: 21682 INCH [MM] TOLERANCE - UNLESS NOTED .X .XX .XXX INCH .1 .01 .005 [MM] 2 .3 .13 [] = DIM. FOR REFERENCE ONLY 6 5 4 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLIONE MAY 25,2018 CHKD DATE DIVISION CODE C 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 25 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 ECO DRFT EMSD 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 JNC BM DRFT CHKD REVISED AND REDRAWN DIVISION 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3Mconnectors.com MAY 25,2018 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE B. MIZE MAY 25,2018 3M COPYRIGHT 2018 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE ROUND CONDUCTOR FLAT CABLE, .050", 28AWG STRANDED, HAL-FREE CAGE SIZE NUMBER MODEL HF365 DRAWING NO. REV. 78-5100-2334-0 DET. LISTS 1 YES NO C SHT 1 OF 2 Imaged: Central Standard Time 5/25/2018 -- UTC Offset (hrs) 6 0.18 .002 C .050 REVISION 0.64 .007 3M PART NUMBER 78-5100-2334-0 .025 NUMBER OF CONDUCTORS A 8 7 6 5 4 3 2 1 D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. C C Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. DRAWING NUMBER 78-5100-2334-0 C REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3M.com/interconnect C 79052 MAY 25,2018 JNC BM DRFT CHKD REVISED AND REDRAWN DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV CASTIGLIONE MAY 25,2018 CHKD DATE DIVISION CODE C 1 1 INCHES INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 8 ISSUE DATE AND DESCRIPTION DATE EMSD DO NOT SCALE DRAWING ECO DRFT 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE B. MIZE MAY 25,2018 3M COPYRIGHT 2018 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE ROUND CONDUCTOR FLAT CABLE, .050", 28AWG STRANDED, HAL-FREE CAGE SIZE NUMBER MODEL HF365 DRAWING NO. REV. 78-5100-2334-0 DET. LISTS 1 YES NO C SHT 2 OF 2 Imaged: Central Standard Time 5/25/2018 -- UTC Offset (hrs) 6 B A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: HF365/09-100 HF365/10-100 HF365/14-100 HF365/14-300 HF365/15-100 HF365/16-100 HF365/16-300 HF365/20-100 HF365/20-300 HF365/25-100 HF365/26-100 HF365/34-100 HF365/37-100 HF365/40-100 HF365/50-100 HF365/50-300 HF365/60-100 HF365/64-100 HF365/09SF-100 HF365/10SF-100 HF365/14SF-100 HF365/15SF-100 HF365/16SF-100 HF365/20SF-100 HF365/25SF-100 HF365/26SF-100 HF365/34SF-100 HF365/40SF-100 HF365/50SF-100 HF365/64SF-100 HF365/04-100 HF365/04SF-100 HF365/06-100 HF365/06SF100 HF365/08-100 HF365/08SF-100 HF365/10-300 HF365/11-100 HF365/11SF-100 HF365/12-100 HF365/12SF100 HF365/14NS-300 HF365/14SF-300 HF365/18-100 HF365/18SF-100 HF365/24-100 HF365/24-300 HF365/24SF-100 HF365/26-300 HF365/30-100 HF365/30SF-100 HF365/36-100 HF365/36SF-100 HF365/37SF-100 HF365/44-100 HF365/44SF-100 HF365/60SF-100 HF365/10NSSF