HLMP-0301 - Hewlett-Packard / Agilent

2.5 mm x 7.6 mm Rectangular

LED Lamps

Technical Data

The HLMP-R100 uses a double

heterojunction (DH) absorbing

substrate (AS) aluminum gallium

arsenide (AlGaAs) red LED chip

in a light red epoxy package. This

combination produces

outstanding light output over a

wide range of drive currents.

The HLMP-0301-C0000 and

-0301 have a high efficiency red

GaAsP on GaP LED chip in a light

red epoxy package.

The HLMP-0401-B0000 and

-0401 provide a yellow GaAsP on

GaP LED chip in a yellow epoxy

package.

Features

• Rectangular Light Emitting

Surface

• Flat High Sterance Emitting

Surface

• Stackable on 2.54 mm (0.100

inch) Centers

• Ideal as Flush Mounted

Panel Indicators

• Ideal for Backlighting

Legends

• Long Life: Solid State

Reliability

• Choice of 4 Bright Colors

DH AS AlGaAs Red

High Efficiency Red

Yellow

High Performance Green

• IC Compatible/Low Current

Requirements

Description

The HLMP-R100, -0301, -0301

-C0000, -0401, -0401-B0000,

-0504, -0504-B0000 are solid

state lamps encapsulated in a

radial lead rectangular epoxy

package. They utilize a tinted,

diffused epoxy to provide high

on-off contrast and a flat high

intensity emitting surface.

Borderless package design allows

creation of uninterrupted light

emitting areas.

Package Dimensions

HLMP-R100

HLMP-0301-C0000

HLMP-0301

HLMP-0401-B0000

HLMP-0401

HLMP-0504-B0000

HLMP-0504

The HLMP-0504-B0000 and

-0504 provide a green GaP LED

chip in a green epoxy package.

I (mcd) @

20 mA DC

Part

Color Number Min. Typ.

DH AlGaAs Red HLMP-R100 3.4 11.0

High 1.3 2.5

Efficiency

Red HLMP-0301 2.1 5.3

1.4 2.5

Yellow

HLMP-0401 3.6 5.0

High 1.6 2.5

Performance

Green HLMP-0504 2.6 8.0

Absolute Maximum Ratings at TA = 25°C

HLMP-

Parameter R100 Units

Peak Forward Current 300 90 60 90 mA

Average Forward Current[1] 20 25 20 25 mA

DC Current[2] 30 30 20 30 mA

Power Dissipation 87 135 85 135 mW

Reverse Voltage (IR = 100 µA) 5 5 5 5 V

Transient Forward Current[3] (10 µs Pulse) 500 500 500 500 mA

Operating Temperature Range -20 to -20 to

+100 -55 to -55 to +100 °C

+100 +100

Storage Temperature Range -55 to -55 to

+100 +100

Lead Soldering Temperature 260°C for 5 seconds

(1.6 mm [0.063 in.] from body)

Notes:

1. See Figure 5 to establish pulsed operating conditions.

2. For AlGaAs Red, Red, and Green Series derate linearly from 50°C at 0.5 mA/°C. For Yellow Series derate linearly from 50°C at

0.2 mA/°C.

3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED

die and wirebond. It is not recommended that the device be operated at peak current beyond the peak forward current listed in the

Absolute Maximum Ratings.

Axial Luminous Intensity

HLMP-

0301-C0000/

-0301

HLMP-

0401-B0000/

-0401

HLMP-

0504-B0000/

-0504

HLMP-0301

-C0000

HLMP-0401

-B0000

HLMP-0504

-B0000

Figure 1. Relative Intensity vs. Wavelength.

Electrical/Optical Characteristics at TA = 25°C

HLMP-R100 Test

Sym. Description Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Conditions

2θ1/2 Included Angle

Between Half

Luminous 100 100 100 100 Deg. Note 1. Fig. 6

Intensity

Points

λPPeak 645 635 583 565 nm Measurement

Wavelength at Peak

λdDominant 637 626 585 569 nm Note 2

Wavelength

∆λ1/2 Spectral Line 20 40 36 28 nm

Halfwidth

τsSpeed of 30 90 90 500 ns

Response

C Capacitance 30 16 18 18 pF VF = 0;

f = 1 MHz

RθJ-PIN Thermal 260 260 260 260 °C/W Junction to

Resistance Cathode Lead

VFForward 1.8 2.2 1.9 2.6 2.1 2.6 2.2 3.0 V IF = 20 mA

Voltage Figure 2.

VRReverse 5.0 5.0 5.0 5.0 V IR = 100 µA

Breakdown

Voltage

ηvLuminous 80 145 500 595 lm/W Note 3

Efficacy

Notes:

1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the

color of the device.

3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv

is the luminous efficacy in lumens/watt.

HLMP

-0301-C0000/

-0301

HLMP

-0401-B0000/

-0401

HLMP

-0504-B0000/

-0504

Figure 6. Relative Luminous Intensity vs. Angular Displacement.

Figure 2. Forward Current vs.

Forward Voltage. VF (300 mA) for

AlGaAs Red = 2.6 Volts Typical.

Figure 3. Relative Luminous Intensity

vs. Forward Current. Figure 4. Relative Efficiency

(Luminous Intensity per Unit Current)

vs. Peak Current. ηv (300 mA) for

AlGaAs Red = 0.7.

Figure 5. Maximum Tolerable Peak Current vs. Peak Duration (IPEAK MAX

Determined from Temperature Derated IDC MAX).

Obsoletes 5964-9378E (4/96)

5968-4160E (2/99)

www.hp.com/go/led

For technical assistance or the location of

your nearest Hewlett-Packard sales office,

distributor or representative call:

Americas/Canada: 1-800-235-0312 or

408-654-8675

Far East/Australasia: Call your local HP

sales office.

Japan: (81 3) 3335-8152

Europe: Call your local HP sales office.

Data subject to change.