CDCV304 www.ti.com................................................................................................................................................ SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009 200-MHz GENERAL-PURPOSE CLOCK BUFFER, PCI-X COMPLIANT FEATURES 1 * * * * * * * * TSSOP PW PACKAGE (TOP VIEW) General-Purpose and PCI-X 1:4 Clock Buffer Operating Frequency - 0 MHz to 200 MHz General-Purpose Low Output Skew: <100 ps Distributes One Clock Input to One Bank of Four Outputs Output Enable Control that Drives Outputs Low when OE is Low Operates from Single 3.3-V Supply or 2.5-V Supply PCI-X Compliant 8-Pin TSSOP Package 1 2 3 4 CLKIN OE 1Y0 GND 8 7 6 5 1Y3 1Y2 VDD 1Y1 DESCRIPTION The CDCV304 is a high-performance, low-skew, general-purpose PCI-X compliant clock buffer. It distributes one input clock signal (CLKIN) to the output clocks (1Y[0:3]). It is specifically designed for use with PCI-X applications. The CDCV304 operates at 3.3 V and 2.5 V and is therefore compliant to the 3.3-V PCI-X specifications. The CDCV304 is characterized for operation from -40C to 85C for automotive and industrial applications. FUNCTIONAL BLOCK DIAGRAM OE CLKIN Logic Control 2 3 1 1Y0 5 1Y1 7 1Y2 8 1Y3 FUNCTION TABLE INPUTS OUTPUTS CLKIN OE 1Y[0:3] L L L H L L L H L H H H 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2000-2009, Texas Instruments Incorporated CDCV304 SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009................................................................................................................................................ www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. TERMINAL FUNCTIONS TERMINAL I/O DESCRIPTION NAME NO. 1Y[0:3] 3, 5, 7, 8 O Buffered output clocks CLKIN 1 I Input reference frequency GND 4 Power OE 2 I VDD 6 Power Ground Output enable control Supply THERMAL INFORMATION THERMAL AIR FLOW (CFM) CDCV304PW 8-PIN TSSOP UNIT 0 150 250 500 149 142 138 132 C/W 230 185 170 150 C/W RJA High K RJA Low K RJC High K 65 C/W RJC High K 69 C/W ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) UNIT Supply voltage range, VDD -0.5 V to 4.3 V Input voltage range, VI (2) (3) -0.5 V to VDD + 0.5 V Output voltage range, VO (2) (3) -0.5 V to VDD + 0.5 V Input clamp current, IIK (VI < 0 or VI> VDD) 50 mA Output clamp current, IOK (VO < 0 or VO > VDD) 50 mA Continuous total output current, IO (VO = 0 to VDD) 50 mA Package thermal impedance, JA: PW package 230.5C/W Storage temperature range Tstg (1) (2) (3) -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited to 4.6 V maximum. RECOMMENDED OPERATING CONDITIONS MIN Supply voltage, VDD 2.3 Low-level input voltage, VIL High-level input voltage, VIH Low-level output current, IOL 0 3.6 V V V VDD -12 VDD = 3.3 V -24 VDD = 2.5 V 12 VDD = 3.3 V 24 -40 Submit Documentation Feedback UNIT 0.3 x VDD VDD = 2.5 V Operating free-air temperature, TA 2 MAX 0.7 x VDD Input voltage, VI High-level output current, IOH NOM 85 V mA mA C Copyright (c) 2000-2009, Texas Instruments Incorporated Product Folder Link(s): CDCV304 CDCV304 www.ti.com................................................................................................................................................ SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009 TIMING REQUIREMENTS over operating free-air temperature range (unless otherwise noted) PARAMETER fclk TEST CONDITIONS Clock frequency MIN TYP 0 MAX UNIT 200 MHz ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK Input voltage VOH High-level output voltage VOL Low-level output voltage IOH High-level output current IOL Low-level output current II Input current TEST CONDITIONS MIN TYP (1) MAX UNIT -1.2 V VDD = 3 V, II = -18 mA VDD = 2.3 V, IOH = -8 mA VDD = 2.3 V, IOH = -16 mA VDD = min to max, IOH = -1 mA VDD = 3 V, IOH = -24 mA 2 VDD = 3 V, IOH = -12 mA 2.4 VDD = 2.3 V, IOL = 8 mA 0.5 VDD = 2.3 V, IOL = 16 mA 0.7 VDD = min to max, IOL = 1 mA 0.2 VDD = 3 V, IOL = 24 mA 0.8 VDD = 3 V, IOL = 12 mA 0.55 VDD = 3 V, VO = 1 V VDD = 3.3 V, VO = 1.65 V VDD = 3 V, VO = 2 V VDD = 3.3 V, VO = 1.65 V 1.8 1.5 VDD - 0.2 V -50 mA -55 60 mA 70 VI = VO or VDD V 5 f = 67 MHz, VDD = 2.7 V 28 f = 67 MHz, VDD = 3.6 V 37 A IDD Dynamic current, see Figure 5 CI Input capacitance VDD = 3.3 V, VI = 0 V or VDD 3 pF CO Output capacitance VDD = 3.3 V, VI = 0 V or VDD 3.2 pF (1) mA All typical values are with respect to nominal VDD and TA = 25C. SWITCHING CHARACTERISTICS VDD = 2.5 V 10%, CL= 10 pF (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (1) MAX 2 2.9 4.5 2 3 4.5 UNIT tPLH Low-to-high propagation delay tPHL High-to-low propagation delay tsk(o) Output skew (2) 50 150 tr Output rise slew rate 1.5 2.2 4 V/ns tf Output fall slew rate 1.5 2.2 4 V/ns (1) (2) See Figure 1 and Figure 2 See Figure 3 ns ps All typical values are with respect to nominal VDD. The tsk(o) specification is only valid for equal loading of all outputs. Submit Documentation Feedback Copyright (c) 2000-2009, Texas Instruments Incorporated Product Folder Link(s): CDCV304 3 CDCV304 SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009................................................................................................................................................ www.ti.com SWITCHING CHARACTERISTICS VDD = 3.3 V 10%, CL= 10 pF (unless otherwise noted) PARAMETER tPLH Low-to-high propagation delay tPHL High-to-low propagation delay tsk(o) Output skew (2) TEST CONDITIONS See Figure 1 and Figure 2 MIN TYP (1) MAX 1.8 2.4 3 1.8 2.5 3 50 100 12 kHz to 5 MHz, fout = 30.72 MHz 63 12 kHz to 20 MHz, fout = 125 MHz 56 UNIT ns ps tjitter Additive phase jitter from input to output 1Y0 tsk(p) Pulse skew tsk(pr) Process skew tsk(pp) Part-to-part skew thigh Clock high time, see Figure 4 tlow Clock low time, see Figure 4 tr Output rise slew rate (3) VO = 0.4 V to 2 V 1.5 2.7 4 V/ns tf Output fall slew rate (3) VO = 2 V to 0.4 V 1.5 2.7 4 V/ns (1) (2) (3) 4 VIH = VDD, VIL = 0 V 66 MHz 6 140 MHz 3 66 MHz 6 140 MHz 3 fs rms 150 ps 0.2 0.3 ns 0.25 0.4 ns ns ns All typical values are with respect to nominal VDD. The tsk(o) specification is only valid for equal loading of all outputs. This symbol is according to PCI-X terminology. Submit Documentation Feedback Copyright (c) 2000-2009, Texas Instruments Incorporated Product Folder Link(s): CDCV304 CDCV304 www.ti.com................................................................................................................................................ SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009 PARAMETER MEASUREMENT INFORMATION VDD 140 Yn 10 pF 140 Figure 1. Test Load Circuit VDD 50% VDD CLKIN 0V tPLH tPHL 0.6 VDD 0.6 VDD 50% VDD 50% VDD 0.2 VDD 1Y0 - 1Y3 VOH 0.2 VDD tr VOL tf Figure 2. Voltage Waveforms Propagation Delay (tpd) Measurements 50% VDD Any Y 50% VDD Any Y tsk(0) Figure 3. Output Skew tcyc PARAMETER VIH(Min) VIL(Max) Vtest VALUE 0.5 VDD thigh UNIT V 0.35 VDD V VIH(Min) 0.4 VDD V Vtest 0.6 VDD VIL(Max) tlow 0.2 VDD 0.4 VDD Peak to Peak (Minimum) A. All parameters in Figure 4 are according to PCI-X 1.0 specifications. Figure 4. Clock Waveform Submit Documentation Feedback Copyright (c) 2000-2009, Texas Instruments Incorporated Product Folder Link(s): CDCV304 5 CDCV304 SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009................................................................................................................................................ www.ti.com SUPPLY CURRENT vs FREQUENCY 60 ICC - Supply Current - mA TA = 85C Output Load: as in Figure 1 50 VDD = 3.6V 40 VDD = 2.7V 30 20 0 20 40 60 80 100 120 140 160 f - Frequency - MHz Figure 5. HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT VOH - High-Level Output Voltage - V 3.5 3.0 VDD = 3.3 V TA = 25C 2.5 2.0 1.5 1.0 0.5 0.0 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 IOH - High-Level Output Current - mA Figure 6. 6 Submit Documentation Feedback Copyright (c) 2000-2009, Texas Instruments Incorporated Product Folder Link(s): CDCV304 CDCV304 www.ti.com................................................................................................................................................ SCAS643F - SEPTEMBER 2000 - REVISED APRIL 2009 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT VOL - Low-Level Output Voltage - V 3.5 3.0 VDD = 3.3 V TA = 25C 2.5 2.0 1.5 1.0 0.5 0.0 -20 0 20 40 60 80 100 120 IOL - Low-Level Output Current - mA Figure 7. Submit Documentation Feedback Copyright (c) 2000-2009, Texas Instruments Incorporated Product Folder Link(s): CDCV304 7 PACKAGE OPTION ADDENDUM www.ti.com 6-Apr-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty CDCV304PW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CDCV304PWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CDCV304PWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CDCV304PWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 6-Apr-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device CDCV304PWR Package Package Pins Type Drawing TSSOP PW 8 SPQ Reel Reel Diameter Width (mm) W1 (mm) 2000 330.0 12.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) 7.0 3.6 1.6 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 6-Apr-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CDCV304PWR TSSOP PW 8 2000 346.0 346.0 29.0 Pack Materials-Page 2 MECHANICAL DATA MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP(R) Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2009, Texas Instruments Incorporated