INCH-POUND MS27466K 2 February 2012 SUPERSEDING MS27466J 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. 'wITHIN .015 8 PLACES ----s ---- CHAMFERED DR ROUNDED 4 PLACES ---, I I I I I I P DIA 4 HOLES (SEE NOTE 4) + GG @ .005 DIA (8) FIGURE 1. Receptacle, classes E, T and P. AMSC N/A FSC 5935 MS27466K LT MARKING SURFACE EITHER LOCATION SEE REF BASIC --, I I ~~Id!=:~: I I FDR DETAILS OF CONNE CTOR FRONT AND REAR END CONFIGURATION SEE PROCUREMENT SPECIFICATIONS Shell size 9 11 13 15 17 19 21 23 25 L (class E) K max +.015 -.000 see basic L (class P) max see basic M +.000 -.005 .632 .953 .085 P dia +.010 -.005 .128 .531 .531 .115 L (class T) max see basic 1.047 .602 .147 1.156 FIGURE 1. Receptacle, classes E, T and P - Continued. 2 R BSC S .020 .3595 .406 .453 .4845 .531 .578 .625 .6875 .750 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 1.812 MS27466K Inches mm Inches mm Inches mm .005 0.13 .406 10.31 .938 23.83 .007 0.18 .453 11.51 .953 24.21 .010 0.25 .4845 12.31 1.031 26.19 .015 0.38 .516 13.11 1.047 26.59 .085 2.16 .531 13.49 1.125 28.58 .115 2.29 .578 14.68 1.156 29.36 .128 3.25 .602 15.29 1.219 30.96 .147 3.73 .625 15.88 1.312 33.32 .156 3.96 .632 16.05 1.438 36.53 .266 6.76 .6875 17.46 1.562 39.67 .3595 9.13 .750 19.05 1.688 42.88 1.812 46.02 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. The gauge features for GG shall be .010 (0.25 mm) smaller than the MMC size at basic location. FIGURE 1. Receptacle, classes E, T and P - Continued. 3 MS27466K REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Mating connectors: This connector mates with MS27467, MS27661 and MS27653. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27466 MS number Class T 15 F 18 P A _____,_[ _ Shell size Finish Insert arrangement Contact style Polarizing positions No letter designator is required for normal. Specification restrictions Navy Army The entire specification sheet is For ground equipment only, class inactive for new design. E is inactive for new design. Air Force Classes E and P are inactive for new design. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27467 MS27653 MS27661 4 MS27466K CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2012-019) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil. 5