UHF RFID Inlays AD-321r6 Dimensions Operating Frequency RF Protocol Chip EPC Memory TID Memory 41.1 x 16 mm Global (860 - 960 MHz) ISO-18000-6C, EPC Class 1, Gen 2 Impinj Monza R6 96 bit 48-bit unique serialized TID number Common Applications Apparel and Retail Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com International +1-770-965-0807 PART NUMBER Format Antenna dimensions (CDxMD) Die-cut dimensions RF600599 Dry Inlay 1.63 x 0.63 in (41.4 x 16 mm) N/A Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet White PET N/A N/A N/A Standard pitch Standard web width Total thickness over chip 1.0 in (25.4 mm) 2 in (50.8 mm) 9-10 mils (229-254 microns) Operating temperature -40 to 185F (-40 to 85C) 1.0 in (25.4 mm) 2.0 in (50.8 mm) 10-12 mils (254-305 microns) -40 to 185F (-40 to 85C) RoHS EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked Inlay-side Out 3 in (76.2 mm) 17 in (431.8 mm) PS Inlay-side Out 3 in (76.2mm) 13 in (330.2mm) 1.63 x 0.63 in (41.4 x 16 mm) 1.75 x 0.75 in (44.5 x 19.0 mm) N/A S-490 (FASSON) 40# SCK (FASSON) 55# 2C (FASSON) Bright White 1.5 in (38.1 mm) 2.0 in (50.8 mm) 11-14 mils (280-355 microns) -40 to 185F (-40 to 85C) EU Directive 2011/65/EU Compliant 100% read tested withof-tolerance inlay marked Label-side Out 3 in (76.2 mm) 15.25 in (387.4 mm) 40,000 good +/- 10% 00 20,000 good +/- 10% 00 13,500 verified 00 Quality assurance Un-wind direction Core size with adaptor insert Maximum roll outer diameter (not to exceed) Average # of units per roll Rev RF600600 Wet Inlay 1.63 x 0.63 in (41.4 x 16 mm) 1.755 x 0.755 in (44.6 x 19.17 mm) White PET S-490 (FASSON) 1.5M Clear PET White PET RF100314 Pressure Sensitive Inlay Care and handling: RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum. Applications: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty: Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Product changes: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. Trademark statement: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com. (c) 2015 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA