NTE1854D/NTE1854M Integrated Circuit Dual Power Operational Amplifier Description: The NTE1854D/NTE1854M is a monolithic dual-power operational amplifier which features a high current, low saturation voltage, flyback protected output stage optimized for driving heavy inductive loads. Capable of operation in a single supply mode form as low as 4.5V up to 13.2V, the NTE1854D/NTE1854M is ideally suited for the computer peripheral environment, driving small motors, solenoids, and linear actuators in an H-bridge configuration. As a general-purpose op amp, the NTE1854D/NTE1854M exhibits low input offset voltage, high open loop gain, low quiescent current, a large differential input voltage range, and a common-mode input voltage range which includes ground (VEE). Features: D Full output swing at 500mA D High inductive load drive capability D Internal flyback protection diodes D Low power dissipation D Single or split supply operation D Common-mode range includes ground (VEE) D High open loop gain D Low input offset voltage D Large differential input voltage range D Thermal shutdown protection D Available in Two Package Types: NTE1854M: 8-Lead Mini DIP NTE1854D: 14-Lead DIP Absolute Maximum Ratings: (Note 1) Supply Voltage (Single Supply), VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 14V DC Output Current, IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0A Peak Output Current (Non-Repetitive), IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Common-Mode Input Voltage, VICM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to VCC -2V Differential-Mode Input Voltage, VIDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Operational Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300C Note 1 Exceeding these ratings could cause damage to the device. All voltages are with respect to GND. All currents are positive into the specified terminal. Recommended Operating Conditions: Supply Voltage (Single Supply), VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V to 13.2V DC Output Current, IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mA Common-mode Input Voltage, VICM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to VCC -2V Differential-Mode Input Voltage, VIDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Operating Ambient Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Electrical Specifications: (VCC = 12V, TA = 25C, unless otherwise specified.) Parameter Symbol Test Conditions Min Typ Max Unit -15 0 +15 mV -30 - +30 mV IB -1.0 -0.2 - A IOS -50 - +50 nA -200 - +200 nA 500 - - K (+) VSAT IOUT = -100mA - 0.8 - V IOUT = -500mA - 1.0 1.5 V (-)VSAT IOUT = -100mA - 0.3 - V IOUT = -500mA - 0.6 1.0 V AVOL 70 90 - dB Common-Mode Rejection Ratio CMRR 66 90 - dB Power Supply Rejection Ratio PSRR 60 80 - dB ICC - 7 15 mA - 175 - C STATIC CHARACTERISTICS Input Offset Voltage VIO TA = TMIN to TMAX Input Bias Current Input Offset Current TA = TMIN to TMAX Difference Input Resistance RID Source Side Output Saturation Voltage Sink Side Output Saturation Voltage Open Loop Voltage Gain Quiescent Drain Current Thermal Shutdown Temperature DYNAMIC CHARACTERISTICS Gain Bandwidth Product GBWP RL = - 800 - kHz Slew Rate dVO/dt AV = 1 - 1.6 - V/s - 200 - kHz Power Bandwidth, -3dB PBW Input Noise Voltage EN 22Hz to 22kHz - 10 - V Input Noise Current IN 22Hz to 22kHz - 200 - pA Channel Separation CS f = 1kHz, RL = 10, AVCL = 30dB - 60 - dB Pin Connection Diagram NTE1854D Pin Connection Diagram NTE1854M Output 1 1 16 GND Supply Voltage 2 15 GND Output 2 3 14 GND Output 1 1 8 Inverted Input 1 GND 4 13 GND Supply Voltage 2 7 Non-Inverted Input 1 Inverted Input 2 5 12 GND Output 2 3 6 Non-Inverted Input 2 Non-Inverted Input 2 6 11 GND GND 4 5 Inverted Input 2 Non-Inverted Input 1 7 10 GND Inverted Input 1 8 9 GND 16 9 .260 (6.6) Max 1 8 .300 (7.62) .785 (19.9) Max .200 (5.08) Max .245 (6.22) Min .100 (2.54) .700 (17.7) 8 5 .260 (6.6) 1 4 .390 (9.9) Max .300 (7.62) .155 (3.93) .100 (2.54) .145 (3.68) .300 (7.62)