LatticeECP/EC Family Data Sheet
DS1000 Version 02.8, September 2012
www.latticesemi.com 1-1 Introduction_01.4
September 2012 Data Sheet
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
Features
Extensive Density and Package Options
1.5K to 32.8K LUT4s
65 to 496 I/Os
Density migration supported
sysDSP™ Block (LatticeECP™ Versions)
High performance multiply and accumulate
4 to 8 blocks
4 to 8 36x36 multipliers or
16 to 32 18x18 multipliers or
32 to 64 9x9 multipliers
Embedded and Distributed Memory
18 Kbits to 498 Kbits sysMEM™ Embedded
Block RAM (EBR)
Up to 131 Kbits distributed RAM
Flexible memory resources:
Distributed and block memory
Flexible I/O Buffer
Programmable sysI/O™ buffer supports wide
range of interfaces:
LVCMOS 3.3/2.5/1.8/1.5/1.2
LVTTL
SSTL 3/2 Class I, II, SSTL18 Class I
HSTL 18 Class I, II, III, HSTL15 Class I, III
PCI
LVDS, Bus-LVDS, LVPECL, RSDS
Dedicated DDR Memory Support
Implements interface up to DDR400 (200MHz)
sysCLOCK™ PLLs
Up to four analog PLLs per device
Clock multiply, divide and phase shifting
System Level Support
IEEE Standard 1149.1 Boundary Scan, plus
ispTRACY™ internal logic analyzer capability
SPI boot flash interface
•1.2V power supply
Low Cost FPGA
Features optimized for mainstream applications
Low cost TQFP and PQFP packaging
Table 1-1. LatticeECP/EC Family Selection Guide
Device LFEC1 LFEC3
LFEC6/
LFECP6
LFEC10/
LFECP10
LFEC15/
LFECP15
LFEC20/
LFECP20
LFEC33/
LFECP33
PFU/PFF Rows 12 16 24 32 40 44 64
PFU/PFF Columns 16243240485664
PFUs/PFFs 192 384 768 1280 1920 2464 4096
LUTs (K) 1.5 3.1 6.1 10.2 15.4 19.7 32.8
Distributed RAM (Kbits) 6 12 25 41 61 79 131
EBR SRAM (Kbits) 18 55 92 276 350 424 498
EBR SRAM Blocks 2 6 10 30 38 46 54
sysDSP Blocks145678
18x18 Multipliers1 16 20 24 28 32
VCC Voltage (V) 1.2 1.2 1.2 1.2 1.2 1.2 1.2
Number of PLLs 2224444
Packages and I/O Combinations:
100-pin TQFP (14 x 14 mm) 67 67
144-pin TQFP (20 x 20 mm) 97 97 97
208-pin PQFP (28 x 28 mm) 112 145 147 147
256-ball fpBGA (17 x 17 mm) 160 195 195 195
484-ball fpBGA (23 x 23 mm) 224 288 352 360 360
672-ball fpBGA (27 x 27 mm) 400 496
1. LatticeECP devices only.
LatticeECP/EC Family Data Sheet
Introduction
1-2
Introduction
LatticeECP/EC Family Data Sheet
Introduction
The LatticeECP/EC family of FPGA devices is optimized to deliver mainstream FPGA features at low cost. For
maximum performance and value, the LatticeECP™ (EConomy Plus) FPGA concept combines an efficient FPGA
fabric with high-speed dedicated functions. Lattice’s first family to implement this approach is the LatticeECP-
DSP™ (EConomy Plus DSP) family, providing dedicated high-performance DSP blocks on-chip. The LatticeEC™
(EConomy) family supports all the general purpose features of LatticeECP devices without dedicated function
blocks to achieve lower cost solutions.
The LatticeECP/EC FPGA fabric, which was designed from the outset with low cost in mind, contains all the critical
FPGA elements: LUT-based logic, distributed and embedded memory, PLLs and support for mainstream I/Os.
Dedicated DDR memory interface logic is also included to support this memory that is becoming increasingly prev-
alent in cost-sensitive applications.
The ispLEVER® design tool suite from Lattice allows large complex designs to be efficiently implemented using the
LatticeECP/EC FPGA family. Synthesis library support for LatticeECP/EC is available for popular logic synthesis
tools. The ispLEVER tool uses the synthesis tool output along with the constraints from its floor planning tools to
place and route the design in the LatticeECP/EC device. The ispLEVER tool extracts the timing from the routing
and back-annotates it into the design for timing verification.
Lattice provides many pre-designed IP (Intellectual Property) ispLeverCORE™ modules for the LatticeECP/EC
family. By using these IPs as standardized blocks, designers are free to concentrate on the unique aspects of their
design, increasing their productivity.
www.latticesemi.com 2-1 Architecture_02.0
September 2012 Data Sheet
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
Architecture Overview
The LatticeECP-DSP and LatticeEC architectures contain an array of logic blocks surrounded by Programmable I/
O Cells (PIC). Interspersed between the rows of logic blocks are rows of sysMEM Embedded Block RAM (EBR), as
shown in Figures 2-1 and 2-2. In addition, LatticeECP-DSP supports an additional row of DSP blocks, as shown in
Figure 2-2.
There are two kinds of logic blocks, the Programmable Functional Unit (PFU) and Programmable Functional unit
without RAM/ROM (PFF). The PFU contains the building blocks for logic, arithmetic, RAM, ROM and register func-
tions. The PFF block contains building blocks for logic, arithmetic and ROM functions. Both PFU and PFF blocks
are optimized for flexibility, allowing complex designs to be implemented quickly and efficiently. Logic Blocks are
arranged in a two-dimensional array. Only one type of block is used per row. The PFU blocks are used on the out-
side rows. The rest of the core consists of rows of PFF blocks interspersed with rows of PFU blocks. For every
three rows of PFF blocks there is a row of PFU blocks.
Each PIC block encompasses two PIOs (PIO pairs) with their respective sysI/O interfaces. PIO pairs on the left and
right edges of the device can be configured as LVDS transmit/receive pairs. sysMEM EBRs are large dedicated fast
memory blocks. They can be configured as RAM or ROM.
The PFU, PFF, PIC and EBR Blocks are arranged in a two-dimensional grid with rows and columns as shown in
Figure 2-1. The blocks are connected with many vertical and horizontal routing channel resources. The place and
route software tool automatically allocates these routing resources.
At the end of the rows containing the sysMEM Blocks are the sysCLOCK Phase Locked Loop (PLL) Blocks. These
PLLs have multiply, divide and phase shifting capability; they are used to manage the phase relationship of the
clocks. The LatticeECP/EC architecture provides up to four PLLs per device.
Every device in the family has a JTAG Port with internal Logic Analyzer (ispTRACY) capability. The sysCONFIG™
port which allows for serial or parallel device configuration. The LatticeECP/EC devices use 1.2V as their core volt-
age.
LatticeECP/EC Family Data Sheet
Architecture
2-2
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-1. Simplified Block Diagram, LatticeEC Device (Top Level)
Figure 2-2. Simplified Block Diagram, LatticeECP-DSP Device (Top Level)
Programmable I/O Cell
(PIC) includes sysIO
Interface
sysCONFIG Programming
Port (includes dedicated
and dual use pins)
Programmable
Functional Unit (PFU)
sysCLOCK PLL
PFF (PFU without
RAM)
JTAG Port
sysMEM Embedded
Block RAM (EBR)
Programmable I/O Cell
(PIC) includes sysIO
Interface
sysCONFIG Programming
Port (includes dedicated
and dual use pins)
Programmable
Functional Unit (PFU)
sysDSP Block
sysCLOCK PLL
PFF (Fast PFU
without RAM/ROM)
JTAG Port
sysMEM Embedded
Block RAM (EBR)
2-3
Architecture
LatticeECP/EC Family Data Sheet
PFU and PFF Blocks
The core of the LatticeECP/EC devices consists of PFU and PFF blocks. The PFUs can be programmed to perform
Logic, Arithmetic, Distributed RAM and Distributed ROM functions. PFF blocks can be programmed to perform
Logic, Arithmetic and ROM functions. Except where necessary, the remainder of the data sheet will use the term
PFU to refer to both PFU and PFF blocks.
Each PFU block consists of four interconnected slices, numbered 0-3 as shown in Figure 2-3. All the interconnec-
tions to and from PFU blocks are from routing. There are 53 inputs and 25 outputs associated with each PFU block.
Figure 2-3. PFU Diagram
Slice
Each slice contains two LUT4 lookup tables feeding two registers (programmed to be in FF or Latch mode), and
some associated logic that allows the LUTs to be combined to perform functions such as LUT5, LUT6, LUT7 and
LUT8. There is control logic to perform set/reset functions (programmable as synchronous/asynchronous), clock
select, chip-select and wider RAM/ROM functions. Figure 2-4 shows an overview of the internal logic of the slice.
The registers in the slice can be configured for positive/negative and edge/level clocks.
There are 14 input signals: 13 signals from routing and one from the carry-chain (from adjacent slice or PFU).
There are 7 outputs: 6 to routing and one to carry-chain (to adjacent PFU). Table 2-1 lists the signals associated
with each slice.
Slice 0
LUT4 &
CARRY
LUT4 &
CARRY
FF/
Latch
D
FF/
Latch
D
Slice 1
LUT4 &
CARRY
LUT4 &
CARRY
Slice 2
LUT4 &
CARRY
LUT4 &
CARRY
From
Routing
To
Routing
Slice 3
LUT4 &
CARRY
LUT4 &
CARRY
FF/
Latch
D
FF/
Latch
D
FF/
Latch
D
FF/
Latch
D
FF/
Latch
D
FF/
Latch
D
2-4
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-4. Slice Diagram
Table 2-1. Slice Signal Descriptions
Function Type Signal Names Description
Input Data signal A0, B0, C0, D0 Inputs to LUT4
Input Data signal A1, B1, C1, D1 Inputs to LUT4
Input Multi-purpose M0 Multipurpose Input
Input Multi-purpose M1 Multipurpose Input
Input Control signal CE Clock Enable
Input Control signal LSR Local Set/Reset
Input Control signal CLK System Clock
Input Inter-PFU signal FCIN Fast Carry In1
Output Data signals F0, F1 LUT4 output register bypass signals
Output Data signals Q0, Q1 Register Outputs
Output Data signals OFX0 Output of a LUT5 MUX
Output Data signals OFX1 Output of a LUT6, LUT7, LUT82 MUX depending on the slice
Output Inter-PFU signal FCO For the right most PFU the fast carry chain output1
1. See Figure 2-3 for connection details.
2. Requires two PFUs.
LUT4 &
CARRY
LUT4 &
CARRY
Slice
A0
B0
C0
D0
FF/
Latch
OFX0
F0
Q0
A1
B1
C1
D1
CI
CI
CO
CO
F
SUM
CE
CLK
LSR
FF/
Latch
OFX1
F1
Q1
F
SUM
D
D
M1
To / From
Different slice / PFU
To / From
Different slice / PFU
LUT
Expansion
Mux
M0
OFX0
From
Routing
To
Routing
Control Signals
selected and
inverted per
slice in routing
Interslice signals
are not shown
2-5
Architecture
LatticeECP/EC Family Data Sheet
Modes of Operation
Each Slice is capable of four modes of operation: Logic, Ripple, RAM and ROM. The Slice in the PFF is capable of
all modes except RAM. Table 2-2 lists the modes and the capability of the Slice blocks.
Table 2-2. Slice Modes
Logic Mode: In this mode, the LUTs in each Slice are configured as 4-input combinatorial lookup tables. A LUT4
can have 16 possible input combinations. Any logic function with four inputs can be generated by programming this
lookup table. Since there are two LUT4s per Slice, a LUT5 can be constructed within one Slice. Larger lookup
tables such as LUT6, LUT7 and LUT8 can be constructed by concatenating other Slices.
Ripple Mode: Ripple mode allows the efficient implementation of small arithmetic functions. In ripple mode, the fol-
lowing functions can be implemented by each Slice:
Addition 2-bit
Subtraction 2-bit
Add/Subtract 2-bit using dynamic control
Up counter 2-bit
Down counter 2-bit
Ripple mode multiplier building block
Comparator functions of A and B inputs
- A greater-than-or-equal-to B
- A not-equal-to B
- A less-than-or-equal-to B
Ripple Mode includes an optional configuration that performs arithmetic using fast carry chain methods. In this
configuration (also referred to as CCU2 mode) two additional signals, Carry Generate and Carry Propagate, are
generated on a per slice basis to allow fast arithmetic functions to be constructed by concatenating Slices.
RAM Mode: In this mode, distributed RAM can be constructed using each LUT block as a 16x1-bit memory.
Through the combination of LUTs and Slices, a variety of different memories can be constructed.
The Lattice design tools support the creation of a variety of different size memories. Where appropriate, the soft-
ware will construct these using distributed memory primitives that represent the capabilities of the PFU. Table 2-3
shows the number of Slices required to implement different distributed RAM primitives. Figure 2-5 shows the dis-
tributed memory primitive block diagrams. Dual port memories involve the pairing of two Slices, one Slice functions
as the read-write port. The other companion Slice supports the read-only port. For more information about using
RAM in LatticeECP/EC devices, please see the list of technical documentation at the end of this data sheet.
Table 2-3. Number of Slices Required For Implementing Distributed RAM
Logic Ripple RAM ROM
PFU Slice LUT 4x2 or LUT 5x1 2-bit Arithmetic Unit SPR16x2 ROM16x1 x 2
PFF Slice LUT 4x2 or LUT 5x1 2-bit Arithmetic Unit N/A ROM16x1 x 2
SPR16x2 DPR16x2
Number of slices 1 2
Note: SPR = Single Port RAM, DPR = Dual Port RAM
2-6
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-5. Distributed Memory Primitives
ROM Mode: The ROM mode uses the same principal as the RAM modes, but without the Write port. Pre-loading is
accomplished through the programming interface during configuration.
PFU Modes of Operation
Slices can be combined within a PFU to form larger functions. Table 2-4 tabulates these modes and documents the
functionality possible at the PFU level.
Table 2-4. PFU Modes of Operation
Logic Ripple RAM1ROM
LUT 4x8 or
MUX 2x1 x 8
2-bit Add x 4 SPR16x2 x 4
DPR16x2 x 2
ROM16x1 x 8
LUT 5x4 or
MUX 4x1 x 4
2-bit Sub x 4 SPR16x4 x 2
DPR16x4 x 1
ROM16x2 x 4
LUT 6x 2 or
MUX 8x1 x 2
2-bit Counter x 4 SPR16x8 x 1 ROM16x4 x 2
LUT 7x1 or
MUX 16x1 x 1
2-bit Comp x 4 ROM16x8 x 1
1. These modes are not available in PFF blocks
DO1
DO0
DI0
DI1
AD0
AD1
AD2
AD3
WRE
CK
DO0
AD0
AD1
AD2
AD3
DPR16x2SPR16x2
ROM16x1
RDO1
RDO0
DI0
DI1
WCK
WRE
WDO1
WDO0
WAD0
WAD1
WAD2
WAD3
RAD0
RAD1
RAD2
RAD3
2-7
Architecture
LatticeECP/EC Family Data Sheet
Routing
There are many resources provided in the LatticeECP/EC devices to route signals individually or as busses with
related control signals. The routing resources consist of switching circuitry, buffers and metal interconnect (routing)
segments.
The inter-PFU connections are made with x1 (spans two PFU), x2 (spans three PFU) and x6 (spans seven PFU).
The x1 and x2 connections provide fast and efficient connections in horizontal and vertical directions. The x2 and
x6 resources are buffered, the routing of both short and long connections between PFUs.
The ispLEVER design tool suite takes the output of the synthesis tool and places and routes the design. Generally,
the place and route tool is completely automatic, although an interactive routing editor is available to optimize the
design.
Clock Distribution Network
The clock inputs are selected from external I/O, the sysCLOCK™ PLLs or routing. These clock inputs are fed
through the chip via a clock distribution system.
Primary Clock Sources
LatticeECP/EC devices derive clocks from three primary sources: PLL outputs, dedicated clock inputs and routing.
LatticeECP/EC devices have two to four sysCLOCK PLLs, located on the left and right sides of the device. There
are four dedicated clock inputs, one on each side of the device. Figure 2-6 shows the 20 primary clock sources.
Figure 2-6. Primary Clock Sources
From Routing Clock Input From Routing
PLL Input
Clock Input
PLL Input
PLL Input
Clock Input
PLL Input
From Routing Clock Input From Routing
PLL
PLL
PLL
PLL
20 Primary Clock Sources
To Quadrant Clock Selection
Note: Smaller devices have two PLLs.
2-8
Architecture
LatticeECP/EC Family Data Sheet
Secondary Clock Sources
LatticeECP/EC devices have four secondary clock resources per quadrant. The secondary clock branches are
tapped at every PFU. These secondary clock networks can also be used for controls and high fanout data. These
secondary clocks are derived from four clock input pads and 16 routing signals as shown in Figure 2-7.
Figure 2-7. Secondary Clock Sources
Clock Routing
The clock routing structure in LatticeECP/EC devices consists of four Primary Clock lines and a Secondary Clock
network per quadrant. The primary clocks are generated from MUXs located in each quadrant. Figure 2-8 shows
this clock routing. The four secondary clocks are generated from MUXs located in each quadrant as shown in
Figure 2-9. Each slice derives its clock from the primary clock lines, secondary clock lines and routing as shown in
Figure 2-10.
20 Secondary Clock Sources
To Quadrant Clock Selection
From Routing
From Routing
From Routing
From Routing
From Routing
From Routing
From Routing
From Routing
From
Routing
From
Routing
From
Routing
From
Routing
From
Routing
From
Routing
From
Routing
From
Routing
2-9
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-8. Per Quadrant Primary Clock Selection
Figure 2-9. Per Quadrant Secondary Clock Selection
Figure 2-10. Slice Clock Selection
sysCLOCK Phase Locked Loops (PLLs)
The PLL clock input, from pin or routing, feeds into an input clock divider. There are three sources of feedback sig-
nal to the feedback divider: from CLKOP (PLL Internal), from clock net (CLKOP) or from a user clock (PIN or logic).
There is a PLL_LOCK signal to indicate that VCO has locked on to the input clock signal. Figure 2-11 shows the
sysCLOCK PLL diagram.
The setup and hold times of the device can be improved by programming a delay in the feedback or input path of
the PLL which will advance or delay the output clock with reference to the input clock. This delay can be either pro-
4 Primary Clocks (CLK0, CLK1, CLK2, CLK3) per Quadrant
20 Primary Clock Sources: 12 PLLs + 4 PIOs + 4 Routing
1
DCS DCS
1. Smaller devices have fewer PLL related lines.
4 Secondary Clocks per Quadrant
20 Secondary Clock Feedlines : 4 Clock Input Pads + 16 Routing Signals
2-10
Architecture
LatticeECP/EC Family Data Sheet
grammed during configuration or can be adjusted dynamically. In dynamic mode, the PLL may lose lock after
adjustment and not relock until the tLOCK parameter has been satisfied. Additionally, the phase and duty cycle block
allows the user to adjust the phase and duty cycle of the CLKOS output.
The sysCLOCK PLLs provide the ability to synthesize clock frequencies. Each PLL has four dividers associated
with it: input clock divider, feedback divider, post scalar divider and secondary clock divider. The input clock divider
is used to divide the input clock signal, while the feedback divider is used to multiply the input clock signal. The post
scalar divider allows the VCO to operate at higher frequencies than the clock output, thereby increasing the fre-
quency range. The secondary divider is used to derive lower frequency outputs.
Figure 2-11. PLL Diagram
Figure 2-12 shows the available macros for the PLL. Table 2-5 provides signal description of the PLL Block.
Figure 2-12. PLL Primitive
VCO CLKOS
CLKOK
LOCK
RST
CLKFB
from CLKOP
(PLL internal),
from clock net
(CLKOP) or
from a user
clock (PIN or logic)
Dynamic Delay Adjustment
Input Clock
Divider
(CLKI)
Feedback
Divider
(CLKFB)
Post Scalar
Divider
(CLKOP)
Phase/Duty
Select
Secondary
Clock
Divider
(CLKOK)
Delay
Adjust
Voltage
Controlled
Oscillator
CLKI
(from routing or
external pin)
CLKOP
EPLLB CLKOP
CLKI
CLKFB LOCK
EHXPLLB
CLKOS
CLKI
CLKFB CLKOK
LOCK
RST CLKOP
DDAIZR
DDAILAG
DDA MODE
DDAIDEL[2:0]
DDAOZR
DDAOLAG
DDAODEL[2:0]
2-11
Architecture
LatticeECP/EC Family Data Sheet
Table 2-5. PLL Signal Descriptions
For more information about the PLL, please see the list of technical documentation at the end of this data sheet.
Dynamic Clock Select (DCS)
The DCS is a global clock buffer with smart multiplexer functions. It takes two independent input clock sources and
outputs a clock signal without any glitches or runt pulses. This is achieved regardless of where the select signal is
toggled. There are eight DCS blocks per device, located in pairs at the center of each side. Figure 2-13 illustrates
the DCS Block Macro.
Figure 2-13. DCS Block Primitive
Figure 2-14 shows timing waveforms of the default DCS operating mode. The DCS block can be programmed to
other modes. For more information about the DCS, please see the list of technical documentation at the end of this
data sheet.
Signal I/O Description
CLKI I Clock input from external pin or routing
CLKFB I PLL feedback input from CLKOP (PLL internal), from clock net (CLKOP) or from a user clock
(PIN or logic)
RST I “1” to reset PLL
CLKOS O PLL output clock to clock tree (phase shifted/duty cycle changed)
CLKOP O PLL output clock to clock tree (No phase shift)
CLKOK O PLL output to clock tree through secondary clock divider
LOCK O “1” indicates PLL LOCK to CLKI
DDAMODE I Dynamic Delay Enable. “1”: Pin control (dynamic), “0”: Fuse Control (static)
DDAIZR I Dynamic Delay Zero. “1”: delay = 0, “0”: delay = on
DDAILAG I Dynamic Delay Lag/Lead. “1”: Lead, “0”: Lag
DDAIDEL[2:0] I Dynamic Delay Input
DDAOZR O Dynamic Delay Zero Output
DDAOLAG O Dynamic Delay Lag/Lead Output
DDAODEL[2:0] O Dynamic Delay Output
DCS
CLK0
DCSOUT
CLK1
SEL
2-12
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-14. DCS Waveforms
sysMEM Memory
The LatticeECP/EC devices contain a number of sysMEM Embedded Block RAM (EBR). The EBR consists of a 9-
Kbit RAM, with dedicated input and output registers.
sysMEM Memory Block
The sysMEM block can implement single port, dual port or pseudo dual port memories. Each block can be used in
a variety of depths and widths as shown in Table 2-6.
Table 2-6. sysMEM Block Configurations
Bus Size Matching
All of the multi-port memory modes support different widths on each of the ports. The RAM bits are mapped LSB
word 0 to MSB word 0, LSB word 1 to MSB word 1 and so on. Although the word size and number of words for
each port varies, this mapping scheme applies to each port.
RAM Initialization and ROM Operation
If desired, the contents of the RAM can be pre-loaded during device configuration. By preloading the RAM block
during the chip configuration cycle and disabling the write controls, the sysMEM block can also be utilized as a
ROM.
Memory Mode Configurations
Single Port
8,192 x 1
4,096 x 2
2,048 x 4
1,024 x 9
512 x 18
256 x 36
True Dual Port
8,192 x 1
4,096 x 2
2,048 x 4
1,024 x 9
512 x 18
Pseudo Dual Port
8,192 x 1
4,096 x 2
2,048 x 4
1,024 x 9
512 x 18
256 x 36
CLK0
SEL
DCSOUT
CLK1
2-13
Architecture
LatticeECP/EC Family Data Sheet
Memory Cascading
Larger and deeper blocks of RAM can be created using EBR sysMEM Blocks. Typically, the Lattice design tools
cascade memory transparently, based on specific design inputs.
Single, Dual and Pseudo-Dual Port Modes
Figure 2-15 shows the four basic memory configurations and their input/output names. In all the sysMEM RAM
modes the input data and address for the ports are registered at the input of the memory array. The output data of
the memory is optionally registered at the output.
Figure 2-15. sysMEM EBR Primitives
The EBR memory supports three forms of write behavior for single port or dual port operation:
1. Normal – data on the output appears only during read cycle. During a write cycle, the data (at the current
address) does not appear on the output. This mode is supported for all data widths.
2. Write Through – a copy of the input data appears at the output of the same port during a write cycle. This
mode is supported for all data widths.
3. Read-Before-Write – when new data is being written, the old content of the address appears at the output.
This mode is supported for x9, x18 and x36 data widths.
Memory Core Reset
The memory array in the EBR utilizes latches at the A and B output ports. These latches can be reset asynchro-
nously or synchronously. RSTA and RSTB are local signals, which reset the output latches associated with Port A
and Port B, respectively. The Global Reset (GSRN) signal resets both ports. The output data latches and associ-
ated resets for both ports are as shown in Figure 2-16.
EBR
AD[12:0]
DI[35:0]
CLK
CE
RST
WE
CS[2:0]
DO[35:0]
Single Port RAM
EBR
True Dual Port RAM
Pseudo-Dual Port RAM
ROM
AD[12:0]
CLK
CE DO[35:0]
RST
CS[2:0]
EBR
EBR
ADA[12:0]
DIA[17:0]
CLKA
CEA
RSTA
WEA
CSA[2:0]
DOA[17:0]
ADB[12:0]
DIB[17:0]
CLKB
CEB
RSTB
WEB
CSB[2:0]
DOB[17:0]
ADW[12:0]
DI[35:0]
CLKW
CEW
ADR[12:0]
DO[35:0]
CER
CLKR
WE
RST
CS[2:0]
2-14
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-16. Memory Core Reset
For further information about sysMEM EBR block, please see the the list of technical documentation at the end of
this data sheet.
EBR Asynchronous Reset
EBR asynchronous reset or GSR (if used) can only be applied if all clock enables are low for a clock cycle before the
reset is applied and released a clock cycle after the reset is released, as shown in Figure 2-17. The GSR input to the
EBR is always asynchronous.
Figure 2-17. EBR Asynchronous Reset (Including GSR) Timing Diagram
If all clock enables remain enabled, the EBR asynchronous reset or GSR may only be applied and released after
the EBR read and write clock inputs are in a steady state condition for a minimum of 1/fMAX (EBR clock). The reset
release must adhere to the EBR synchronous reset setup time before the next active read or write clock edge.
If an EBR is pre-loaded during configuration, the GSR input must be disabled or the release of the GSR during
device Wake Up must occur before the release of the device I/Os becomes active.
These instructions apply to all EBR RAM and ROM implementations.
Note that there are no reset restrictions if the EBR synchronous reset is used and the EBR GSR input is disabled.
sysDSP Block
The LatticeECP-DSP family provides a sysDSP block, making it ideally suited for low cost, high performance Digital
Signal Processing (DSP) applications. Typical functions used in these applications are Finite Impulse Response
(FIR) filters; Fast Fourier Transforms (FFT) functions, correlators, Reed-Solomon/Turbo/Convolution encoders and
Q
SET
D
L
CLR
Output Data
Latches
Memory Core
Port A[17:0]
Q
SET
D
Port B[17:0]
RSTB
GSRN
Programmable Disable
RSTA
L
CLR
Reset
Clock
Clock
Enable
2-15
Architecture
LatticeECP/EC Family Data Sheet
decoders. These complex signal processing functions use similar building blocks such as multiply-adders and mul-
tiply-accumulators.
sysDSP Block Approach Compared to General DSP
Conventional general-purpose DSP chips typically contain one to four (Multiply and Accumulate) MAC units with
fixed data-width multipliers; this leads to limited parallelism and limited throughput. Their throughput is increased by
higher clock speeds. The LatticeECP, on the other hand, has many DSP blocks that support different data-widths.
This allows the designer to use highly parallel implementations of DSP functions. The designer can optimize the
DSP performance vs. area by choosing an appropriate level of parallelism. Figure 2-18 compares the serial and the
parallel implementations.
Figure 2-18. Comparison of General DSP and LatticeECP-DSP Approaches
sysDSP Block Capabilities
The sysDSP block in the LatticeECP-DSP family supports four functional elements in three 9, 18 and 36 data path
widths. The user selects a function element for a DSP block and then selects the width and type (signed/unsigned)
of its operands. The operands in the LatticeECP-DSP family sysDSP Blocks can be either signed or unsigned but
not mixed within a function element. Similarly, the operand widths cannot be mixed within a block.
The resources in each sysDSP block can be configured to support the following four elements:
MULT (Multiply)
MAC (Multiply, Accumulate)
MULTADD (Multiply, Addition/Subtraction)
MULTADDSUM (Multiply, Addition/Subtraction, Accumulate)
The number of elements available in each block depends on the width selected from the three available options x9,
x18, and x36. A number of these elements are concatenated for highly parallel implementations of DSP functions.
Table 2-1 shows the capabilities of the block.
Multiplier 0
Operand
A
Operand
B
Operand
A
Operand
B
Operand
A
Operand
B
Multiplier 1 Multiplier
(k-1)
Accumulator
Output
m/k
loopsSingle
Multiplier x
xx x
Operand
A
Accumulator
Operand
B
M loops
Function implemented in
General purpose DSP
Function implemented
in LatticeECP
Σ
Σ
2-16
Architecture
LatticeECP/EC Family Data Sheet
Table 2-7. Maximum Number of Elements in a Block
Some options are available in four elements. The input register in all the elements can be directly loaded or can be
loaded as shift registers from previous operand registers. In addition by selecting “dynamic operation” in the
‘Signed/Unsigned’ options the operands can be switched between signed and unsigned on every cycle. Similarly
by selecting ‘Dynamic operation’ in the ‘Add/Sub’ option the Accumulator can be switched between addition and
subtraction on every cycle.
MULT sysDSP Element
This multiplier element implements a multiply with no addition or accumulator nodes. The two operands, A and B,
are multiplied and the result is available at the output. The user can enable the input/output and pipeline registers.
Figure 2-19 shows the MULT sysDSP element.
Figure 2-19. MULT sysDSP Element
MAC sysDSP Element
In this case the two operands, A and B, are multiplied and the result is added with the previous accumulated value.
This accumulated value is available at the output. The user can enable the input and pipeline registers but the out-
put register is always enabled. The output register is used to store the accumulated value. A registered overflow
signal is also available. The overflow conditions are provided later in this document. Figure 2-20 shows the MAC
sysDSP element.
Width of Multiply x9 x18 x36
MULT 841
MAC 2 2
MULTADD 4 2
MULTADDSUM 2 1
Multiplier
x
n
m
m
n
m
n
m
n
n
m
m+n
m+n
(default)
CLK (CLK0,CLK1,CLK2,CLK3)
CE (CE0,CE1,CE2,CE3)
RST(RST0,RST1,RST2,RST3)
Pipeline
Register
Input
Register
Multiplier
Multiplicand
Signed
Shift Register A InShift Register B In
Shift Register A OutShift Register B Out
Output
Input Data
Register A
Input Data
Register B
Output
Register
To
Multiplier
2-17
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-20. MAC sysDSP Element
MULTADD sysDSP Element
In this case, the operands A0 and B0 are multiplied and the result is added/subtracted with the result of the multi-
plier operation of operands A1 and A2. The user can enable the input, output and pipeline registers. Figure 2-21
shows the MULTADD sysDSP element.
Figure 2-21. MULTADD
Multiplier
x
n
m
m+n
(default)
m+n+16 bits
(default)
m+n+16 bits
(default)
Input Data
Register B
Input Data
Register A
m
n
n
n
m
n
n
m
Overflow
Register Output
Register
Accumulator
Multiplier
Multiplicand
SignedAB
Shift Register A InShift Register B In
Shift Register A OutShift Register B Out
Output
Addn
Accumsload
Pipeline
Register
CLK (CLK0,CLK1,CLK2,CLK3)
CE (CE0,CE1,CE2,CE3)
RST(RST0,RST1,RST2,RST3)
Input
Register
Pipeline
Register
Input
Register
Pipeline
Register
Input
Register
Pipeline
Register
To
Accumulator
To
Accumulator
To
Accumulator
Overflow
signal
Multiplier
Multiplier
Add/Sub
Pipe
Reg
Pipe
Reg
n
m
m
n
m
n
m
n
n
m
m+n
(default)
m+n+1
(default)
m+n+1
(default)
m+n
(default)
x
x
n
m
m
n
m
n
n
m
Multiplier B0
Multiplicand A0
Multiplier B1
Multiplicand A1
Signed
Shift Register A InShift Register B In
Shift Register A OutShift Register B Out
Output
Addn
Pipeline
Register
CLK (CLK0,CLK1,CLK2,CLK3)
CE (CE0,CE1,CE2,CE3)
RST(RST0,RST1,RST2,RST3)
Input
Register
Pipeline
Register
Input
Register
Pipeline
Register
Pipeline
Register
Input Data
Register A
Input Data
Register A
Input Data
Register B
Input Data
Register B
Output
Register
To Add/Sub
To Add/Sub
2-18
Architecture
LatticeECP/EC Family Data Sheet
MULTADDSUM sysDSP Element
In this case, the operands A0 and B0 are multiplied and the result is added/subtracted with the result of the multi-
plier operation of operands A1 and B1. Additionally the operands A2 and B2 are multiplied and the result is added/
subtracted with the result of the multiplier operation of operands A3 and B3. The result of both addition/subtraction
are added in a summation block. The user can enable the input, output and pipeline registers. Figure 2-22 shows
the MULTADDSUM sysDSP element.
Figure 2-22. MULTADDSUM
Clock, Clock Enable and Reset Resources
Global Clock, Clock Enable and Reset signals from routing are available to every DSP block. Four Clock, Reset
and Clock Enable signals are selected for the sysDSP block. From four clock sources (CLK0, CLK1, CLK2, CLK3)
one clock is selected for each input register, pipeline register and output register. Similarly Clock enable (CE) and
Reset (RST) are selected from their four respective sources (CE0, CE1, CE2, CE3 and RST0, RST1, RST2, RST3)
at each input register, pipeline register and output register.
Multiplier
Add/Sub0
x
n
mm+n
(default)
m+n
(default)
m+n+1
m+n+2 m+n+2
m+n+1
m+n
(default)
m+n
(default)
m
n
m
n
m
n
n
m
x
n
n
m
n
n
m
Multiplier
Multiplier
Multiplier
Add/Sub1
x
n
m
m
n
m
n
m
n
n
m
x
n
m
m
n
m
n
n
m
SUM
Multiplier B0
Multiplicand A0
Multiplier B1
Multiplicand A1
Multiplier B2
Multiplicand A2
Multiplier B3
Multiplicand A3
Signed
Shift Register B In
Output
Addn0
Pipeline
Register
CLK (CLK0,CLK1,CLK2,CLK3)
CE (CE0,CE1,CE2,CE3)
RST(RST0,RST1,RST2,RST3)
Input
Register
Pipeline
Register
Input
Register
To Add/Sub0
To Add/Sub0, Add/Sub1
Pipeline
Register
Pipeline
Register
Input
Register
To Add/Sub1
Addn1
Pipeline
Register
Pipeline
Register
Pipeline
Register
Shift Register A In
Shift Register B Out Shift Register A Out
Input Data
Register A
Input Data
Register A
Input Data
Register A
Input Data
Register A
Input Data
Register B
Input Data
Register B
Input Data
Register B
Input Data
Register B
Output
Register
2-19
Architecture
LatticeECP/EC Family Data Sheet
Signed and Unsigned with Different Widths
The DSP block supports different widths of signed and unsigned multipliers besides x9, x18 and x36 widths. For
unsigned operands, unused upper data bits should be filled to create a valid x9, x18 or x36 operand. For signed
two’s complement operands, sign extension of the most significant bit should be performed until x9, x18 or x36
width is reached. Table 2-8 provides an example of this.
Table 2-8. An Example of Sign Extension
OVERFLOW Flag from MAC
The sysDSP block provides an overflow output to indicate that the accumulator has overflowed. When two
unsigned numbers are added and the result is a smaller number then accumulator roll over is said to occur and
overflow signal is indicated. When two positive numbers are added with a negative sum and when two negative
numbers are added with a positive sum, then the accumulator “roll-over” is said to have occurred and an overflow
signal is indicated. Note when overflow occurs the overflow flag is present for only one cycle. By counting these
overflow pulses in FPGA logic, larger accumulators can be constructed. The conditions overflow signals for signed
and unsigned operands are listed in Figure 2-23.
Figure 2-23. Accumulator Overflow/Underflow Conditions
Number Unsigned
Unsigned
9-bit
Unsigned
18-bit Signed
Twos Complement
Signed 9-Bits
Two’s Complement
Signed 18-bits
+5 0101 000000101 000000000000000101 0101 000000101 000000000000000101
-6 0110 000000110 000000000000000110 1010 111111010 111111111111111010
000000000
000000001
000000010
000000011
111111101
111111110
111111111
Overflow signal is generated
for one cycle when this
boundary is crossed
0
+1
+2
+3
-3
-2
-1
Unsigned Operation
Signed Operation
0101111111
0101111110
0101111101
0101111100
1010000010
1010000001
1010000000
255
254
253
252
254
255
256
000000000
000000001
000000010
000000011
111111101
111111110
111111111
Carry signal is generated for
one cycle when this
boundary is crossed
0
1
2
3
509
510
511
0101111111
0101111110
0101111101
0101111100
1010000010
1010000001
1010000000
255
254
253
252
258
257
256
2-20
Architecture
LatticeECP/EC Family Data Sheet
IPexpress™
The user can access the sysDSP block via the IPexpress configuration tool, included with the ispLEVER design
tool suite. IPexpress has options to configure each DSP module (or group of modules) or through direct HDL
instantiation. Additionally Lattice has partnered Mathworks to support instantiation in the Simulink tool, which is a
Graphical Simulation Environment. Simulink works with ispLEVER and dramatically shortens the DSP design cycle
in Lattice FPGAs.
Optimized DSP Functions
Lattice provides a library of optimized DSP IP functions. Some of the IPs planned for LatticeECP DSP are: Bit Cor-
relators, Fast Fourier Transform, Finite Impulse Response (FIR) Filter, Reed-Solomon Encoder/ Decoder, Turbo
Encoder/Decoders and Convolutional Encoder/Decoder. Please contact Lattice to obtain the latest list of available
DSP IPs.
Resources Available in the LatticeECP Family
Table 2-9 shows the maximum number of multipliers for each member of the LatticeECP family. Table 2-10 shows
the maximum available EBR RAM Blocks in each of the LatticeECP family. EBR blocks, together with Distributed
RAM can be used to store variables locally for the fast DSP operations.
Table 2-9. Number of DSP Blocks in LatticeECP Family
Table 2-10. Embedded SRAM in LatticeECP Family
DSP Performance of the LatticeECP Family
Table 2-11 lists the maximum performance in millions of MAC operations per second (MMAC) for each member of
the LatticeECP family.
Table 2-11. DSP Block Performance of LatticeECP Family
Device DSP Block 9x9 Multiplier 18x18 Multiplier 36x36 Multiplier
LFECP6 4 32 16 4
LFECP10 5 40 20 5
LFECP15 6 48 24 6
LFECP20 7 56 28 7
LFECP33 8 64 32 8
Device EBR SRAM Block
Total EBR SRAM
(Kbits)
LFECP6 10 92
LFECP10 30 276
LFECP15 38 350
LFECP20 46 424
LFECP33 54 498
Device DSP Block
DSP Performance
MMAC
LFECP6 4 3680
LFECP10 5 4600
LFECP15 6 5520
LFECP20 7 6440
LFECP33 8 7360
2-21
Architecture
LatticeECP/EC Family Data Sheet
For further information about the sysDSP block, please see the list of technical information at the end of this data
sheet.
Programmable I/O Cells (PIC)
Each PIC contains two PIOs connected to their respective sysI/O Buffers which are then connected to the PADs as
shown in Figure 2-24. The PIO Block supplies the output data (DO) and the Tri-state control signal (TO) to sysI/O
buffer, and receives input from the buffer.
Figure 2-24. PIC Diagram
Two adjacent PIOs can be joined to provide a differential I/O pair (labeled as “T” and “C”) as shown in Figure 2-25.
The PAD Labels “T” and “C” distinguish the two PIOs. Only the PIO pairs on the left and right edges of the device
can be configured as LVDS transmit/receive pairs.
One of every 16 PIOs contains a delay element to facilitate the generation of DQS signals. The DQS signal feeds
the DQS bus which spans the set of 16 PIOs. Figure 2-25 shows the assignment of DQS pins in each set of 16
PIOs. The exact DQS pins are shown in a dual function in the Logic Signal Connections table at the end of this data
sheet. Additional detail is provided in the Signal Descriptions table at the end of this data sheet. The DQS signal
from the bus is used to strobe the DDR data from the memory into input register blocks. This interface is designed
for memories that support one DQS strobe per eight bits of data.
PIO B
PADA
"T"
PADB
"C"
OPOS0
ONEG0
OPOS1
ONEG1
TD
INCK
INDD
INFF
IPOS0
IPOS1
CLK
CE
LSR
GSRN
PIO A
sysIO
Buffer
DQS
DDRCLKPOL
IOLD0
IOLT0
D0
DDRCLK
DI
IPOS1
IPOS0
INCK
INDD
INFF
D0
D1
TD
D1
Output
Register Block
(2 Flip Flops)
Tristate
Register Block
(2 Flip Flops)
DDRCLK
Input
Register Block
(5 Flip Flops)
CLKO
CLKI
CEO
CEI
Control
Muxes
LSR
GSR
2-22
Architecture
LatticeECP/EC Family Data Sheet
Table 2-12. PIO Signal List
Figure 2-25. DQS Routing
PIO
The PIO contains four blocks: an input register block, output register block, tristate register block and a control logic
block. These blocks contain registers for both single data rate (SDR) and double data rate (DDR) operation along
with the necessary clock and selection logic. Programmable delay lines used to shift incoming clock and data sig-
nals are also included in these blocks.
Name Type Description
CE0, CE1 Control from the core Clock enables for input and output block FFs.
CLK0, CLK1 Control from the core System clocks for input and output blocks.
LSR Control from the core Local Set/Reset.
GSRN Control from routing Global Set/Reset (active low).
INCK Input to the core Input to Primary Clock Network or PLL reference inputs.
DQS Input to PIO DQS signal from logic (routing) to PIO.
INDD Input to the core Unregistered data input to core.
INFF Input to the core Registered input on positive edge of the clock (CLK0).
IPOS0, IPOS1 Input to the core DDRX registered inputs to the core.
ONEG0 Control from the core Output signals from the core for SDR and DDR operation.
OPOS0, Control from the core Output signals from the core for DDR operation
OPOS1 ONEG1 Tristate control from the core Signals to Tristate Register block for DDR operation.
TD Tristate control from the core Tristate signal from the core used in SDR operation.
DDRCLKPOL Control from clock polarity bus Controls the polarity of the clock (CLK0) that feed the DDR input block.
PIO A
PIO B
PADA "T"
PADB "C"
PIO B
PIO A
PIO B
PIO A
Assigned
DQS Pin
DQS
sysIO
Buffer
LVDS Pair
PADA "T"
PADB "C"
LVDS Pair
PADA "T"
PADB "C"
LVDS Pair
PIO A
PIO B
PADA "T"
PADB "C"
LVDS Pair
PIO A
PIO B
PADA "T"
PADB "C"
LVDS Pair
PIO A
PIO B
PADA "T"
PADB "C"
LVDS Pair
PIO A
PIO B
PADA "T"
PADB "C"
LVDS Pair
PIO A
PIO B
PADA "T"
PADB "C"
LVDS Pair
Delay
2-23
Architecture
LatticeECP/EC Family Data Sheet
Input Register Block
The input register block contains delay elements and registers that can be used to condition signals before they are
passed to the device core. Figure 2-26 shows the diagram of the input register block.
Input signals are fed from the sysI/O buffer to the input register block (as signal DI). If desired the input signal can
bypass the register and delay elements and be used directly as a combinatorial signal (INDD), a clock (INCK) and
in selected blocks the input to the DQS delay block. If one of the bypass options is not chosen, the signal first
passes through an optional delay block. This delay, if selected, reduces input-register hold-time requirement when
using a global clock.
The input block allows two modes of operation. In the single data rate (SDR) the data is registered, by one of the
registers in the single data rate sync register block, with the system clock. In the DDR Mode two registers are used
to sample the data on the positive and negative edges of the DQS signal creating two data streams, D0 and D2.
These two data streams are synchronized with the system clock before entering the core. Further discussion on
this topic is in the DDR Memory section of this data sheet.
Figure 2-27 shows the input register waveforms for DDR operation and Figure 2-28 shows the design tool primi-
tives. The SDR/SYNC registers have reset and clock enable available.
The signal DDRCLKPOL controls the polarity of the clock used in the synchronization registers. It ensures ade-
quate timing when data is transferred from the DQS to system clock domain. For further discussion on this topic,
see the DDR Memory section of this data sheet.
Figure 2-26. Input Register Diagram
DQ
DQ
DQ
D-Type
Fixed Delay
To Routin
g
DI
(From sysIO
Buffer)
DQS Delayed
(From DQS
Bus)
CLK0
(From Routing)
DDRCLKPOL
(From DDR
Polarity Control Bus)
INCK
INDD
Delay Block
DDR Registers
D-Type D-Type
DQ
DQ
D-Type
/LATCH
/LATCH
D-Type
IPOS0
IPOS1
SDR & Sync
Registers
D0
D2
D1
2-24
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-27. Input Register DDR Waveforms
Figure 2-28. INDDRXB Primitive
Output Register Block
The output register block provides the ability to register signals from the core of the device before they are passed
to the sysI/O buffers. The block contains a register for SDR operation that is combined with an additional latch for
DDR operation. Figure 2-29 shows the diagram of the Output Register Block.
In SDR mode, ONEG0 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured a D-
type or latch. In DDR mode, ONEG0 is fed into one register on the positive edge of the clock and OPOS0 is
latched. A multiplexer running off the same clock selects the correct register for feeding to the output (D0).
Figure 2-30 shows the design tool DDR primitives. The SDR output register has reset and clock enable available.
The additional register for DDR operation does not have reset or clock enable available.
ABCDE F
BD
DI
(In DDR Mode)
D0
D2
DQS
AC
DQS
Delayed
IDDRXB
LSR QA
D
ECLK
QB
DDRCLKPOL
SCLK
CE
2-25
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-29. Output Register Block
Figure 2-30. ODDRXB Primitive
Tristate Register Block
The tristate register block provides the ability to register tri-state control signals from the core of the device before
they are passed to the sysI/O buffers. The block contains a register for SDR operation and an additional latch for
DDR operation. Figure 2-31 shows the diagram of the Tristate Register Block.
In SDR mode, ONEG1 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured a D-
type or latch. In DDR mode, ONEG1 is fed into one register on the positive edge of the clock and OPOS1 is
latched. A multiplexer running off the same clock selects the correct register for feeding to the output (D0).
DQ
DQ
D-Type
ONEG0
From
Routing
CLK1
Programmed
Control
DO
Latch
LE*
*Latch is transparent when input is low.
OPOS0
OUTDDN
/LATCH
0
1
0
1To sysIO
Buffer
ODDRXB
LSR
Q
DB
CLK
DA
2-26
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-31. Tristate Register Block
Control Logic Block
The control logic block allows the selection and modification of control signals for use in the PIO block. A clock is
selected from one of the clock signals provided from the general purpose routing and a DQS signal provided from
the programmable DQS pin. The clock can optionally be inverted.
The clock enable and local reset signals are selected from the routing and optionally inverted. The global tristate
signal is passed through this block.
DDR Memory Support
Implementing high performance DDR memory interfaces requires dedicated DDR register structures in the input
(for read operations) and in the output (for write operations). As indicated in the PIO Logic section, the LatticeEC
devices provide this capability. In addition to these registers, the LatticeEC devices contain two elements to simplify
the design of input structures for read operations: the DQS delay block and polarity control logic.
DLL Calibrated DQS Delay Block
Source Synchronous interfaces generally require the input clock to be adjusted in order to correctly capture data at
the input register. For most interfaces a PLL is used for this adjustment. However in DDR memories the clock
(referred to as DQS) is not free running so this approach cannot be used. The DQS Delay block provides the
required clock alignment for DDR memory interfaces.
The DQS signal (selected PIOs only) feeds from the PAD through a DQS delay element to a dedicated DQS routing
resource. The DQS signal also feeds polarity control logic, which controls the polarity of the clock to the sync regis-
ters in the input register blocks. Figures 2-32 and 2-33 show how the DQS transition signals are routed to the PIOs.
The temperature, voltage and process variations of the DQS delay block are compensated by a set of calibration
(6-bit bus) signals from two DLLs on opposite sides of the device. Each DLL compensates DQS Delays in its half of
the device as shown in Figure 2-33. The DLL loop is compensated for temperature, voltage and process variations
by the system clock and feedback loop.
D
LE*
Q
DQ
D-Type
ONEG1
CLK1
Programmed
Control
TO
Latch
*Latch is transparent when input is low.
OPOS1
OUTDDN
/LATCH
0
1
0
1
From
Routing To sysIO
Buffer
TD
2-27
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-32. DQS Local Bus.
Figure 2-33. DLL Calibration Bus and DQS/DQS Transition Distribution
DI
CLKI
CEI
PIO
GSR
DQS
Input
Register Block
( 5 Flip Flops)
To Sync.
Reg.
DQS To DDR
Reg.
DQS
Strobe
PA D
DDR
Datain
PA D
sysIO
Buffer
DI
sysIO
Buffer
PIO
DQSDEL
Polarity Control
Logic
DQS
Calibration Bus
from DLL
Delay
Control
Bus
Polarity
Control
Bus
DQS
Bus
DLL
DLL
Polarity Control Bus
DQS Bus
Delay Control Bus
2-28
Architecture
LatticeECP/EC Family Data Sheet
Polarity Control Logic
In a typical DDR Memory interface design, the phase relation between the incoming delayed DQS strobe and the
internal system Clock (during the READ cycle) is unknown.
The LatticeECP/EC family contains dedicated circuits to transfer data between these domains. To prevent setup
and hold violations at the domain transfer between DQS (delayed) and the system Clock a clock polarity selector is
used. This changes the edge on which the data is registered in the synchronizing registers in the input register
block. This requires evaluation at the start of each READ cycle for the correct clock polarity.
Prior to the READ operation in DDR memories DQS is in tristate (pulled by termination). The DDR memory device
drives DQS low at the start of the preamble state. A dedicated circuit detects this transition. This signal is used to
control the polarity of the clock to the synchronizing registers.
sysI/O Buffer
Each I/O is associated with a flexible buffer referred to as a sysI/O buffer. These buffers are arranged around the
periphery of the device in eight groups referred to as Banks. The sysI/O buffers allow users to implement the wide
variety of standards that are found in today’s systems including LVCMOS, SSTL, HSTL, LVDS and LVPECL.
sysI/O Buffer Banks
LatticeECP/EC devices have eight sysI/O buffer banks; each is capable of supporting multiple I/O standards. Each
sysI/O bank has its own I/O supply voltage (VCCIO), and two voltage references VREF1 and VREF2 resources allow-
ing each bank to be completely independent from each other. Figure 2-34 shows the eight banks and their associ-
ated supplies.
In the LatticeECP/EC devices, single-ended output buffers and ratioed input buffers (LVTTL, LVCMOS, PCI and PCI-
X) are powered using VCCIO. LVTTL, LVCMOS33, LVCMOS25 and LVCMOS12 can also be set as fixed threshold
input independent of VCCIO. In addition to the bank VCCIO supplies, the LatticeECP/EC devices have a VCC core logic
power supply, and a VCCAUX supply that power all differential and referenced buffers.
Each bank can support up to two separate VREF voltages, VREF1 and VREF2 that set the threshold for the refer-
enced input buffers. In the LatticeECP/EC devices, some dedicated I/O pins in a bank can be configured to be a
reference voltage supply pin. Each I/O is individually configurable based on the bank’s supply and reference volt-
ages.
2-29
Architecture
LatticeECP/EC Family Data Sheet
Figure 2-34. LatticeECP/EC Banks
LatticeECP/EC devices contain two types of sysI/O buffer pairs.
1. Top and Bottom sysI/O Buffer Pairs (Single-Ended Outputs Only)
The sysI/O buffer pairs in the top and bottom banks of the device consist of two single-ended output drivers
and two sets of single-ended input buffers (both ratioed and referenced). The referenced input buffer can also
be configured as a differential input.
The two pads in the pair are described as “true” and “comp”, where the true pad is associated with the positive
side of the differential input buffer and the comp (complementary) pad is associated with the negative side of
the differential input buffer.
Only the I/Os on the top and bottom banks have programmable PCI clamps. These I/O banks also support hot
socketing with IDK less than 1mA. Note that the PCI clamp is enabled after VCC, VCCAUX and VCCIO are at valid
operating levels and the device has been configured.
2. Left and Right sysI/O Buffer Pairs (Differential and Single-Ended Outputs)
The sysI/O buffer pairs in the left and right banks of the device consist of two single-ended output drivers, two
sets of single-ended input buffers (both ratioed and referenced) and one differential output driver. The refer-
enced input buffer can also be configured as a differential input. In these banks the two pads in the pair are
described as “true” and “comp”, where the true pad is associated with the positive side of the differential I/O,
and the comp (complementary) pad is associated with the negative side of the differential I/O.
Only the left and right banks have LVDS differential output drivers. See the IDK specification for I/O leakage cur-
rent during power-up.
V
REF1(2)
GND
Bank 2
V
CCIO2
V
REF2(2)
V
REF1(3)
GND
Bank 3
V
CCIO3
V
REF2(3)
V
REF1(7)
GND
TOP
LEFT
RIGHT
BOTTOM
Bank 7
V
CCIO7
V
REF2(7)
V
REF1(6)
GND
Bank 6
V
CCIO6
V
REF2(6)
V
REF1(5)
GND
Bank 5
V
CCIO5
V
REF2(5)
V
REF1(4)
GND
Bank 4
V
CCIO4
V
REF2(4)
V
REF1(0)
GND
Bank 0
V
CCIO0
V
REF2(0)
V
REF1(1)
GND
Bank 1
V
CCIO1
V
REF2(1)
2-30
Architecture
LatticeECP/EC Family Data Sheet
Typical I/O Behavior During Power-up
The internal power-on-reset (POR) signal is deactivated when VCC and VCCAUX have reached satisfactory levels.
After the POR signal is deactivated, the FPGA core logic becomes active. It is the user’s responsibility to ensure
that all other VCCIO banks are active with valid input logic levels to properly control the output logic states of all the
I/O banks that are critical to the application. For more information about controlling the output logic state with valid
input logic levels during power-up in LatticeECP/EC devices, see the list of technical documentation at the end of
this data sheet.
The VCC and VCCAUX supply the power to the FPGA core fabric, whereas the VCCIO supplies power to the I/O buf-
fers. In order to simplify system design while providing consistent and predictable I/O behavior, it is recommended
that the I/O buffers be powered-up prior to the FPGA core fabric. VCCIO supplies should be powered-up before or
together with the VCC and VCCAUX supplies.
Supported Standards
The LatticeECP/EC sysI/O buffer supports both single-ended and differential standards. Single-ended standards
can be further subdivided into LVCMOS, LVTTL and other standards. The buffers support the LVTTL, LVCMOS 1.2,
1.5, 1.8, 2.5 and 3.3V standards. In the LVCMOS and LVTTL modes, the buffer has individually configurable
options for drive strength, bus maintenance (weak pull-up, weak pull-down, or a bus-keeper latch) and open drain.
Other single-ended standards supported include SSTL and HSTL. Differential standards supported include LVDS,
BLVDS, LVPECL, RSDS, differential SSTL and differential HSTL. Tables 2-13 and 2-14 show the I/O standards
(together with their supply and reference voltages) supported by the LatticeECP/EC devices. For further informa-
tion about utilizing the sysI/O buffer to support a variety of standards please see the the list of technical information
at the end of this data sheet.
Table 2-13. Supported Input Standards
Input Standard VREF (Nom.) VCCIO1 (Nom.)
Single Ended Interfaces
LVT T L
LVC MOS 33 2——
LVC MOS 25 2——
LVC MOS 18 1. 8
LVC MOS 15 1. 5
LVC MOS 12 2——
PCI 3.3
HSTL18 Class I, II 0.9
HSTL18 Class III 1.08
HSTL15 Class I 0.75
HSTL15 Class III 0.9
SSTL3 Class I, II 1.5
SSTL2 Class I, II 1.25
SSTL18 Class I 0.9
Differential Interfaces
Differential SSTL18 Class I
Differential SSTL2 Class I, II
Differential SSTL3 Class I, II
Differential HSTL15 Class I, III
Differential HSTL18 Class I, II, III
LVDS, LVPECL, BLVDS, RSDS
1. When not specified VCCIO can be set anywhere in the valid operating range.
2. JTAG inputs do not have a fixed threshold option and always follow VCCJ.
2-31
Architecture
LatticeECP/EC Family Data Sheet
Table 2-14. Supported Output Standards
Hot Socketing
The LatticeECP/EC devices have been carefully designed to ensure predictable behavior during power-up and
power-down. Power supplies can be sequenced in any order. During power up and power-down sequences, the
I/Os remain in tristate until the power supply voltage is high enough to ensure reliable operation. In addition,
leakage into I/O pins is controlled within specified limits, this allows for easy integration with the rest of the sys-
tem. These capabilities make the LatticeECP/EC ideal for many multiple power supply and hot-swap applica-
tions.
Configuration and Testing
The following section describes the configuration and testing features of the LatticeECP/EC devices.
IEEE 1149.1-Compliant Boundary Scan Testability
All LatticeECP/EC devices have boundary scan cells that are accessed through an IEEE 1149.1 compliant test
access port (TAP). This allows functional testing of the circuit board, on which the device is mounted, through a
serial scan path that can access all critical logic nodes. Internal registers are linked internally, allowing test data to
Output Standard Drive VCCIO (Nom.)
Single-ended Interfaces
LVTTL 4mA, 8mA, 12mA, 16mA, 20mA 3.3
LVCMOS33 4mA, 8mA, 12mA 16mA, 20mA 3.3
LVCMOS25 4mA, 8mA, 12mA, 16mA, 20mA 2.5
LVCMOS18 4mA, 8mA, 12mA, 16mA 1.8
LVCMOS15 4mA, 8mA 1.5
LVCMOS12 2mA, 6mA 1.2
LVCMOS33, Open Drain 4mA, 8mA, 12mA 16mA, 20mA
LVCMOS25, Open Drain 4mA, 8mA, 12mA 16mA, 20mA
LVCMOS18, Open Drain 4mA, 8mA, 12mA 16mA
LVCMOS15, Open Drain 4mA, 8mA
LVCMOS12, Open Drain 2mA, 6mA
PCI33 N/A 3.3
HSTL18 Class I, II, III N/A 1.8
HSTL15 Class I, III N/A 1.5
SSTL3 Class I, II N/A 3.3
SSTL2 Class I, II N/A 2.5
SSTL18 Class I N/A 1.8
Differential Interfaces
Differential SSTL3, Class I, II N/A 3.3
Differential SSTL2, Class I, II N/A 2.5
Differential SSTL18, Class I N/A 1.8
Differential HSTL18, Class I, II, III N/A 1.8
Differential HSTL15, Class I, III N/A 1.5
LVDS N/A 2.5
BLVDS1N/A 2.5
LVPECL1N/A 3.3
RSDS1N/A 2.5
1. Emulated with external resistors.
2-32
Architecture
LatticeECP/EC Family Data Sheet
be shifted in and loaded directly onto test nodes, or test data to be captured and shifted out for verification. The test
access port consists of dedicated I/Os: TDI, TDO, TCK and TMS. The test access port has its own supply voltage
VCCJ and can operate with LVCMOS3.3, 2.5, 1.8, 1.5 and 1.2 standards.
For more details on boundary scan test, please see information regarding additional technical documentation at
the end of this data sheet.
Device Configuration
All LatticeECP/EC devices contain two possible ports that can be used for device configuration. The test access
port (TAP), which supports bit-wide configuration, and the sysCONFIG port that supports both byte-wide and serial
configuration.
The TAP supports both the IEEE Std. 1149.1 Boundary Scan specification and the IEEE Std. 1532 In-System Con-
figuration specification. The sysCONFIG port is a 20-pin interface with six of the I/Os used as dedicated pins and
the rest being dual-use pins (please refer to TN1053 for more information about using the dual-use pins as general
purpose I/O). There are four configuration options for LatticeECP/EC devices:
1. Industry standard SPI memories.
2. Industry standard byte wide flash and ispMACH 4000 for control/addressing.
3. Configuration from system microprocessor via the configuration bus or TAP.
4. Industry standard FPGA board memory.
On power-up, the FPGA SRAM is ready to be configured with the sysCONFIG port active. The IEEE 1149.1 serial
mode can be activated any time after power-up by sending the appropriate command through the TAP port. Once a
configuration port is selected, that port is locked and another configuration port cannot be activated until the next
power-up sequence.
For more information about device configuration, please see the list of technical documentation at the end of this
data sheet.
Internal Logic Analyzer Capability (ispTRACY)
All LatticeECP/EC devices support an internal logic analyzer diagnostic feature. The diagnostic features provide
capabilities similar to an external logic analyzer, such as programmable event and trigger condition and deep trace
memory. This feature is enabled by Lattice’s ispTRACY. The ispTRACY utility is added into the user design at com-
pile time.
For more information about ispTRACY, please see information regarding additional technical documentation at the
end of this data sheet.
External Resistor
LatticeECP/EC devices require a single external, 10K ohm +/- 1% value between the XRES pin and ground. Device
configuration will not be completed if this resistor is missing. There is no boundary scan register on the external
resistor pad.
2-33
Architecture
LatticeECP/EC Family Data Sheet
Oscillator
Every LatticeECP/EC device has an internal CMOS oscillator which is used to derive a master clock for configura-
tion. The oscillator and the master clock run continuously. The default value of the master clock is 2.5MHz. Table 2-
15 lists all the available Master Clock frequencies. When a different Master Clock is selected during the design pro-
cess, the following sequence takes place:
1. User selects a different Master Clock frequency.
2. During configuration the device starts with the default (2.5MHz) Master Clock frequency.
3. The clock configuration settings are contained in the early configuration bit stream.
4. The Master Clock frequency changes to the selected frequency once the clock configuration bits are received.
For further information about the use of this oscillator for configuration, please see the list of technical documenta-
tion at the end of this data sheet.
Table 2-15. Selectable Master Clock (CCLK) Frequencies During Configuration
Density Shifting
The LatticeECP/EC family has been designed to ensure that different density devices in the same package have
the same pin-out. Furthermore, the architecture ensures a high success rate when performing design migration
from lower density parts to higher density parts. In many cases, it is also possible to shift a lower utilization design
targeted for a high-density device to a lower density device. However, the exact details of the final resource utiliza-
tion will impact the likely success in each case.
CCLK (MHz) CCLK (MHz) CCLK (MHz)
2.5* 13 45
4.3 15 51
5.4 20 55
6.9 26 60
8.1 30 130
9.2 34
10.0 41
www.latticesemi.com 3-1 DC and Switching_02.0
September 2012 Data Sheet
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
Recommended Operating Conditions
Absolute Maximum Ratings1, 2, 3
1. Stress above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
2. Compliance with the Lattice Thermal Management document is required.
3. All voltages referenced to GND.
Supply Voltage VCC . . . . . . . . . . . . . . . . . . . -0.5 to 1.32V
Supply Voltage VCCAUX . . . . . . . . . . . . . . . . -0.5 to 3.75V
Supply Voltage VCCJ . . . . . . . . . . . . . . . . . . -0.5 to 3.75V
Output Supply Voltage VCCIO . . . . . . . . . . . -0.5 to 3.75V
Dedicated Input Voltage Applied4 . . . . . . . . -0.5 to 4.25V
I/O Tristate Voltage Applied 4. . . . . . . . . . . . -0.5 to 3.75V
Storage Temperature (Ambient) . . . . . . . . . -65 to 150°C
Junction Temp. (Tj) . . . . . . . . . . . . . . . . . . . . . . . +125°C
4. Overshoot and undershoot of -2V to (VIHMAX + 2) volts is permitted for a duration of <20ns.
Symbol Parameter Min. Max. Units
VCC Core Supply Voltage 1.14 1.26 V
VCCAUX3Auxiliary Supply Voltage 3.135 3.465 V
VCCPLL PLL Supply Voltage for ECP/EC33 1.14 1.26 V
VCCIO1, 2 I/O Driver Supply Voltage 1.140 3.465 V
VCCJ1Supply Voltage for IEEE 1149.1 Test Access Port 1.140 3.465 V
tJCOM Junction Commercial Operation 0 85 °C
tJIND Junction Industrial Operation -40 100 °C
1. If VCCIO or VCCJ is set to 1.2V, they must be connected to the same power supply as VCC. If VCCIO or VCCJ is set to 3.3V, they must be con-
nected to the same power supply as VCCAUX.
2. See recommended voltages by I/O standard in subsequent table.
3. VCCAUX ramp rate must not exceed 3mV/µs for commercial and 0.6 mV/µs for industrial device operations during power up when transition-
ing between 0.8V and 1.8V.
Hot Socketing Specifications1, 2, 3, 4
1. Insensitive to sequence of VCC, VCCAUX and VCCIO. However, assumes monotonic rise/fall rates for VCC, VCCAUX and VCCIO.
2. 0 ð VCC ð VCC (MAX), 0 ð VCCIO ð VCCIO (MAX) or 0 ð VCCAUX ð VCCAUX (MAX).
3. IDK is additive to IPU, IPW or IBH.
4. LVCMOS and LVTTL only.
Symbol Parameter Condition Min. Typ. Max. Units
Top and Bottom General Purpose sysI/Os (Banks 0, 1, 4 and 5), JTAG and Dedicated sysCONFIG Pins
IDK_TB Input or I/O Leakage Current 0 ð VIN ð VIH (MAX.) +/-1000 µA
Left and Right General Purpose sysI/Os (Banks 2, 3, 6 and 7)
IDK_LR Input or I/O Leakage Current VIN ð VCCIO ——+/-1000µA
VIN > VCCIO —35—mA
LatticeECP/EC Family Data Sheet
DC and Switching Characteristics
3-2
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
DC Electrical Characteristics
Over Recommended Operating Conditions
Symbol Parameter Condition Min. Typ. Max. Units
IIL, IIH1Input or I/O Leakage 0 ð VIN ð (VCCIO - 0.2V) 10 µA
IIH1, 3 Input or I/O High Leakage (VCCIO - 0.2V) ð VIH ð 3.6V 40 µA
IPU I/O Active Pull-up Current 0 ð VIN ð 0.7 VCCIO -30 -150 µA
IPD I/O Active Pull-down Current VIL (MAX) ð VIN ð VIH (MAX) 30 150 µA
IBHLS Bus Hold Low sustaining current VIN = VIL (MAX) 30 µA
IBHHS Bus Hold High sustaining current VIN = 0.7VCCIO -30 µA
IBHLO Bus Hold Low Overdrive current 0 ð VIN ð VIH (MAX) 150 µA
IBHLH Bus Hold High Overdrive current 0 ð VIN ð VIH (MAX) -150 µA
VBHT Bus Hold trip Points 0 ð VIN ð VIH (MAX) VIL (MAX) VIH (MIN) V
C1 I/O Capacitance2VCCIO = 3.3V, 2.5V, 1.8V, 1.5V, 1.2V,
VCC = 1.2V, VIO = 0 to VIH (MAX) —8pf
C2 Dedicated Input Capacitance2VCCIO = 3.3V, 2.5V, 1.8V, 1.5V, 1.2V,
VCC = 1.2V, VIO = 0 to VIH (MAX) —6pf
1. Input or I/O leakage current is measured with the pin configured as an input or as an I/O with the output driver tri-stated. It is not measured
with the output driver active. Bus maintenance circuits are disabled.
2. TA 25oC, f = 1.0MHz
3. For top and bottom general purpose I/O pins, when VIH is higher than VCCIO, a transient current typically of 30ns in duration or less with a
peak current of 6mA can occur on the high-to-low transition. For left and right I/O banks, VIH must be less than or equal to VCCIO.
3-3
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Supply Current (Standby)1, 2, 3, 4
Over Recommended Operating Conditions
1. For further information about supply current, please see the list of technical documentation at the end of this data sheet.
2. Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
3. Frequency 0MHz.
4. Pattern represents a “blank” configuration data file.
Symbol Parameter Device Typ.5
5. TJ=25oC, power supplies at nominal voltage.
Units
ICC Core Power Supply Current
LFEC1 6 mA
LFEC3 10 mA
LFECP6/LFEC6 15 mA
LFECP10/LFEC10 25 mA
LFECP15/LFEC15 35 mA
LFECP20/LFEC20 60 mA
LFECP33/LFEC33 85 mA
ICCAUX Auxiliary Power Supply Current 15 mA
ICCPLL PLL Power Supply Current 5 mA
ICCIO Bank Power Supply Current6
6. Per bank.
2mA
ICCJ VCCJ Power Supply Current 5 mA
3-4
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Initialization Supply Current1, 2, 3, 4, 5, 6
Over Recommended Operating Conditions
1. Until DONE signal is active.
2. For further information about supply current, please see the list of technical documentation at the end of this data sheet.
3. Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
4. Frequency 0MHz.
5. Pattern represents typical design with 65% logic, 55% EBR, 10% routing utilization.
6. TJ=25oC, power supplies at nominal voltage.
Symbol Parameter Devices Typ.6Units
ICC Core Power Supply Current
LFEC1 25 mA
LFEC3 40 mA
LFECP6/LFEC6 50 mA
LFECP10/LFEC10 60 mA
LFECP15/LFEC15 70 mA
LFECP20/LFEC20 150 mA
LFECP33/LFEC33 220 mA
ICCAUX Auxiliary Power Supply Current
LFEC1 30 mA
LFEC3 30 mA
LFECP6/LFEC6 30 mA
LFECP10/LFEC10 35 mA
LFECP15/LFEC15 35 mA
LFECP20/LFEC20 40 mA
LFECP33/LFEC33 40 mA
ICCPLL PLL Power Supply Current 12 mA
ICCIO Bank Power Supply Current7
7. Per bank.
LFEC1 4 mA
LFEC3 5 mA
LFECP6/LFEC6 6 mA
LFECP10/LFEC10 6 mA
LFECP15/LFEC15 7 mA
LFECP20/LFEC20 8 mA
LFECP33/LFEC33 8 mA
ICCJ VCCJ Power Supply Current 20 mA
3-5
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
sysI/O Recommended Operating Conditions
VCCIO VREF (V)
Standard Min. Typ. Max. Min. Typ. Max.
LVCMOS 3.3 3.135 3.3 3.465
LVCMOS 2.5 2.375 2.5 2.625
LVCMOS 1.8 1.71 1.8 1.89
LVCMOS 1.5 1.425 1.5 1.575
LVCMOS 1.2 1.14 1.2 1.26
LVTTL 3.135 3.3 3.465
PCI 3.135 3.3 3.465
SSTL18 Class I 1.71 1.8 1.89 0.833 0.90 0.969
SSTL2 Class I, II 2.375 2.5 2.625 1.15 1.25 1.35
SSTL3 Class I, II 3.135 3.3 3.465 1.3 1.5 1.7
HSTL15 Class I 1.425 1.5 1.575 0.68 0.75 0.9
HSTL15 Class III 1.425 1.5 1.575 0.9
HSTL 18 Class I, II 1.71 1.8 1.89 0.9
HSTL 18 Class III 1.71 1.8 1.89 1.08
LVDS 2.375 2.5 2.625
LVPE CL 13.135 3.3 3.465
BLVDS12.375 2.5 2.625
RSDS12.375 2.5 2.625
1. Outputs are implemented with the addition of external resistors. VCCIO applies to outputs only.
3-6
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
sysI/O Single-Ended DC Electrical Characteristics
Input/Output
Standard
VIL VIH VOL Max.
(V)
VOH Min.
(V)
IOL1
(mA)
IOH1
(mA)Min. (V) Max. (V) Min. (V) Max. (V)
LVCMOS 3.3 -0.3 0.8 2.0 3.6 0.4 VCCIO - 0.4 20, 16, 12,
8, 4
-20, -16, -12,
-8, -4
0.2 VCCIO - 0.2 0.1 -0.1
LVTTL -0.3 0.8 2.0 3.6 0.4 VCCIO - 0.4 20, 16, 12,
8, 4
-20, -16, -12,
-8, -4
0.2 VCCIO - 0.2 0.1 -0.1
LVCMOS 2.5 -0.3 0.7 1.7 3.6 0.4 VCCIO - 0.4 20, 16, 12,
8, 4
-20, -16, -12,
-8, -4
0.2 VCCIO - 0.2 0.1 -0.1
LVCMOS 1.8 -0.3 0.35VCCIO 0.65VCCIO 3.6 0.4 VCCIO - 0.4 16, 12, 8, 4 -16, -12, -8, -4
0.2 VCCIO - 0.2 0.1 -0.1
LVCMOS 1.5 -0.3 0.35VCCIO 0.65VCCIO 3.6 0.4 VCCIO - 0.4 8, 4 -8, -4
0.2 VCCIO - 0.2 0.1 -0.1
LVCMOS 1.2 -0.3 0.35VCC 0.65VCC 3.6 0.4 VCCIO - 0.4 6, 2 -6, -2
0.2 VCCIO - 0.2 0.1 -0.1
PCI -0.3 0.3VCCIO 0.5VCCIO 3.6 0.1VCCIO 0.9VCCIO 1.5 -0.5
SSTL3 class I -0.3 VREF - 0.2 VREF + 0.2 3.6 0.7 VCCIO - 1.1 8 -8
SSTL3 class II -0.3 VREF - 0.2 VREF + 0.2 3.6 0.5 VCCIO - 0.9 16 -16
SSTL2 class I -0.3 VREF - 0.18 VREF + 0.18 3.6 0.54 VCCIO - 0.62 7.6 -7.6
SSTL2 class II -0.3 VREF - 0.18 VREF + 0.18 3.6 0.35 VCCIO - 0.43 15.2 -15.2
SSTL18 class I -0.3 VREF - 0.125 VREF + 0.125 3.6 0.4 VCCIO - 0.4 6.7 -6.7
HSTL15 class I -0.3 VREF - 0.1 VREF + 0.1 3.6 0.4 VCCIO - 0.4 8 -8
HSTL15 class III -0.3 VREF - 0.1 VREF + 0.1 3.6 0.4 VCCIO - 0.4 24 -8
HSTL18 class I -0.3 VREF - 0.1 VREF + 0.1 3.6 0.4 VCCIO - 0.4 9.6 -9.6
HSTL18 class II -0.3 VREF - 0.1 VREF + 0.1 3.6 0.4 VCCIO - 0.4 16 -16
HSTL18 class III -0.3 VREF - 0.1 VREF + 0.1 3.6 0.4 VCCIO - 0.4 24 -8
1. The average DC current drawn by I/Os between GND connections, or between the last GND in an I/O bank and the end of an I/O bank, as
shown in the logic signal connections table shall not exceed n * 8mA. Where n is the number of I/Os between bank GND connections or
between the last GND in a bank and the end of a bank.
3-7
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
sysI/O Differential Electrical Characteristics
LVDS
Over Recommended Operating Conditions
Parameter
Symbol Parameter Description Test Conditions Min. Typ. Max. Units
VINP, VINM Input voltage 0 2.4 V
VTHD Differential input threshold +/-100 mV
VCM Input common mode voltage
100mV ð VTHD VTHD/2 1.2 1.8 V
200mV ð VTHD VTHD/2 1.2 1.9 V
350mV ð VTHD VTHD/2 1.2 2.0 V
IIN Input current Power on or power off +/-10 µA
VOH Output high voltage for VOP or VOM RT = 100 Ohm 1.38 1.60 V
VOL Output low voltage for VOP or VOM RT = 100 Ohm 0.9V 1.03 V
VOD Output voltage differential (VOP - VOM), RT = 100 Ohm 250 350 450 mV
VOD Change in VOD between high and
low ——50mV
VOS Output voltage offset (VOP + VOM)/2, RT = 100 Ohm 1.125 1.25 1.375 V
VOS Change in VOS between H and L 50 mV
IOSD Output short circuit current VOD = 0V Driver outputs
shorted —— 6mA
3-8
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Differential HSTL and SSTL
Differential HSTL and SSTL outputs are implemented as a pair of complementary single-ended outputs. All allow-
able single-ended output classes (class I and class II) are supported in this mode.
LVDS25E
The top and bottom side of LatticeECP/EC devices support LVDS outputs via emulated complementary LVCMOS
outputs in conjunction with a parallel resistor across the driver outputs. The scheme shown in
Figure 3-1 is one possible solution for point-to-point signals.
Figure 3-1. LVDS25E Output Termination Example
Table 3-1. LVDS25E DC Conditions
Parameter Description Typical Units
VOH Output high voltage 1.42 V
VOL Output low voltage 1.08 V
VOD Output differential voltage 0.35 V
VCM Output common mode voltage 1.25 V
ZBACK Back impedance 100 ¾
+
-
Bourns
CAT16-LV4F12
RS=165 ohms
(±1%)
RS=165 ohms
(±1%)
RD = 140 ohms
(±1%)
RD = 100 ohms
(±1%)
OFF-chip
Transmission line, Zo = 100 ohm differential
VCCIO = 2.5V (±5%)
VCCIO = 2.5V (±5%)
ON-chip OFF-chip ON-chip
3-9
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
BLVDS
The LatticeECP/EC devices support BLVDS standard. This standard is emulated using complementary LVCMOS
outputs in conjunction with a parallel external resistor across the driver outputs. BLVDS is intended for use when
multi-drop and bi-directional multi-point differential signaling is required. The scheme shown in Figure 3-2 is one
possible solution for bi-directional multi-point differential signals.
Figure 3-2. BLVDS Multi-point Output Example
Table 3-2. BLVDS DC Conditions1
Over Recommended Operating Conditions
Typical
Parameter Description Zo = 45 Zo = 90 Units
ZOUT Output impedance 100 100 ohm
RTLEFT Left end termination 45 90 ohm
RTRIGHT Right end termination 45 90 ohm
VOH Output high voltage 1.375 1.48 V
VOL Output low voltage 1.125 1.02 V
VOD Output differential voltage 0.25 0.46 V
VCM Output common mode voltage 1.25 1.25 V
IDC DC output current 11.2 10.2 mA
1. For input buffer, see LVDS table.
Heavily loaded backplane, effective Zo ~ 45 to 90 ohms differential
100100
2.5V
2.5V
+
-
100100
2.5V
2.5V
+
-
100
100
2.5V
2.5V
+
-
100
100
2.5V
2.5V
+
-
. . .
45-90 ohms, +/- 1%45-90 ohms, +/- 1%
+
-
+
-
. . .
-%
3-10
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
LVPECL
The LatticeECP/EC devices support differential LVPECL standard. This standard is emulated using complemen-
tary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The LVPECL input standard
is supported by the LVDS differential input buffer. The scheme shown in Figure 3-3 is one possible solution for
point-to-point signals.
Figure 3-3. Differential LVPECL
Table 3-3. LVPECL DC Conditions1
Over Recommended Operating Conditions
For further information about LVPECL, BLVDS and other differential interfaces please see the list of technical infor-
mation at the end of this data sheet.
Parameter Description Typical Units
ZOUT Output impedance 100 ohm
RPDriver parallel resistor 150 ohm
RTReceiver termination 100 ohm
VOH Output high voltage 2.03 V
VOL Output low voltage 1.27 V
VOD Output differential voltage 0.76 V
VCM Output common mode voltage 1.65 V
ZBACK Back impedance 85.7 ohm
IDC DC output current 12.7 mA
1. For input buffer, see LVDS table.
Transmission line, Zo = 100 ohm differential
100 ohms
100 ohms
100 ohms
Off-chip
3.3V
3.3V
+
-
~150 ohms
3-11
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
RSDS
The LatticeECP/EC devices support differential RSDS standard. This standard is emulated using complementary
LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The RSDS input standard is sup-
ported by the LVDS differential input buffer. The scheme shown in Figure 3-4 is one possible solution for RSDS
standard implementation. Use LVDS25E mode with suggested resistors for RSDS operation. Resistor values in
Figure 3-4 are industry standard values for 1% resistors.
Figure 3-4. RSDS (Reduced Swing Differential Standard)
Table 3-4. RSDS DC Conditions
Parameter Description Typical Units
ZOUT Output impedance 20 ohm
RSDriver series resistor 294 ohm
RPDriver parallel resistor 121 ohm
RTReceiver termination 100 ohm
VOH Output high voltage 1.35 V
VOL Output low voltage 1.15 V
VOD Output differential voltage 0.20 V
VCM Output common mode voltage 1.25 V
ZBACK Back impedance 101.5 ohm
IDC DC output current 3.66 mA
100
294
294
On-chip
Emulated
RSDS Buffer
VCCIO = 2.5V
VCCIO = 2.5V
Zo = 100
+
-
121
Off-chip
3-12
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Typical Building Block Function Performance
Pin-to-Pin Performance (LVCMOS25 12mA Drive)
Register-to-Register Performance1
Function -5 Timing Units
Basic Functions
16-bit decoder 5.5 ns
32-bit decoder 6.9 ns
64-bit decoder 7.1 ns
4:1 MUX 4.3 ns
8:1 MUX 4.7 ns
16:1 MUX 5.0 ns
32:1 MUX 5.5 ns
Function -5 Timing Units
Basic Functions
16 bit decoder 410 MHz
32 bit decoder 283 MHz
64 bit decoder 272 MHz
4:1 MUX 613 MHz
8:1 MUX 565 MHz
16:1 MUX 526 MHz
32:1 MUX 442 MHz
8-bit adder 363 MHz
16-bit adder 353 MHz
64-bit adder 196 MHz
16-bit counter 414 MHz
32-bit counter 317 MHz
64-bit counter 216 MHz
64-bit accumulator 178 MHz
Embedded Memory Functions
256x36 Single Port RAM 280 MHz
512x18 True-Dual Port RAM 280 MHz
Distributed Memory Functions
16x2 Single Port RAM 460 MHz
64x2 Single Port RAM 375 MHz
128x4 Single Port RAM 294 MHz
32x2 Pseudo-Dual Port RAM 392 MHz
64x4 Pseudo-Dual Port RAM 332 MHz
DSP Function2
9x9 Pipelined Multiply/Accumulate 242 MHz
18x18 Pipelined Multiply/Accumulate 238 MHz
36x36 Pipelined Multiply 235 MHz
1. These timing numbers were generated using the ispLEVER design tool. Exact performance may vary with design and tool version. The tool
uses internal parameters that have been characterized but are not tested on every device.
2. Applies to LatticeECP devices only.
Timing v.G 0.30
3-13
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Derating Timing Tables
Logic Timing provided in the following sections of the data sheet and the ispLEVER design tools are worst-case
numbers in the operating range. Actual delays at nominal temperature and voltage for best-case process, can be
much better than the values given in the tables. To calculate logic timing numbers at a particular temperature and
voltage multiply the noted numbers with the derating factors provided below.
The junction temperature for the FPGA depends on the power dissipation by the device, the package thermal char-
acteristics (JA), and the ambient temperature, as calculated with the following equation:
TJMAX = TAMAX + (Power * JA)
The user must determine this temperature and then use it to determine the derating factor based on the following
derating tables: TJ °C.
Table 3-5. Delay Derating Table for Internal Blocks
TJ °C
Commercial
TJ °C
Industrial
Power Supply Voltage
1.14V1.2V1.26V
-40 0.82 0.77 0.71
-25 0.82 0.76 0.71
0 20 0.890.830.78
25 45 0.93 0.87 0.81
85 105 1.00 0.94 0.89
3-14
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
LatticeECP/EC External Switching Characteristics
Over Recommended Operating Conditions
Parameter Description Device
-5 -4 -3
UnitsMin. Max. Min. Max. Min. Max.
General I/O Pin Parameters (Using Primary Clock without PLL)1
tCO7Clock to Output - PIO Output
Register
LFEC1 5.09 6.11 7.13 ns
LFEC3 5.71 6.85 7.99 ns
LFEC6 5.60 6.72 7.84 ns
LFEC10 5.47 6.57 7.66 ns
LFEC15 5.67 6.81 7.94 ns
LFEC20 5.89 7.07 8.25 ns
LFEC33 6.19 7.42 8.66 ns
tSU7Clock to Data Setup - PIO Input
Register
LFEC1 -0.08 -0.10 -0.12 ns
LFEC3 -0.70 -0.84 -0.98 ns
LFEC6 -0.63 -0.76 -0.89 ns
LFEC10 -0.43 -0.52 -0.61 ns
LFEC15 -0.70 -0.84 -0.98 ns
LFEC20 -0.88 -1.06 -1.24 ns
LFEC33 -1.12 -1.34 -1.56 ns
tH7Clock to Data Hold - PIO Input
Register
LFEC1 2.19 2.62 3.06 ns
LFEC3 2.80 3.36 3.92 ns
LFEC6 2.69 3.23 3.77 ns
LFEC10 2.56 3.08 3.59 ns
LFEC15 2.76 3.32 3.87 ns
LFEC20 2.99 3.58 4.18 ns
LFEC33 3.28 3.93 4.59 ns
tSU_DEL7Clock to Data Setup - PIO Input
Register with Data Input Delay
LFEC1 3.36 4.03 4.70 ns
LFEC3 2.74 3.29 3.84 ns
LFEC6 2.81 3.37 3.93 ns
LFEC10 3.01 3.61 4.21 ns
LFEC15 2.74 3.29 3.83 ns
LFEC20 2.56 3.07 3.58 ns
LFEC33 2.32 2.79 3.25 ns
tH_DEL7Clock to Data Hold - PIO Input
Register with Input Data Delay
LFEC1 -1.31 -1.57 -1.83 ns
LFEC3 -0.70 -0.83 -0.97 ns
LFEC6 -0.80 -0.96 -1.12 ns
LFEC10 -0.93 -1.12 -1.30 ns
LFEC15 -0.73 -0.88 -1.02 ns
LFEC20 -0.51 -0.61 -0.71 ns
LFEC33 -0.22 -0.26 -0.30 ns
fMAX_IO2Clock Frequency of I/O and PFU
Register All 420 378 340 Mhz
DDR I/O Pin Parameters3, 4, 5
tDVADQ Data Valid After DQS (DDR Read) All 0.19 0.19 0.19 UI
tDVEDQ Data Hold After DQS (DDR Read) All 0.67 0.67 0.67 UI
3-15
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Figure 3-5. DDR Timings
tDQVBS Data Valid Before DQS All 0.20 0.20 0.20 UI
tDQVAS Data Valid After DQS All 0.20 0.20 0.20 UI
fMAX_DDR DDR Clock Frequency All 95 200 95 166 95 133 MHz
Primary and Secondary Clock6
fMAX_PRI2Frequency for Primary Clock Tree All 420 378 340 MHz
tW_PRI Clock Pulse Width for Primary
Clock All 1.19 1.19 1.19 ns
tSKEW_PRI Primary Clock Skew within an I/O
Bank All 250 300 350 ps
1. General timing numbers based on LVCMOS2.5V, 12 mA. Loading of 0 pF.
2. Using LVDS I/O standard.
3. DDR timing numbers based on SSTL I/O.
4. DDR specifications are characterized but not tested.
5. UI is average bit period.
6. Based on a single primary clock.
7. These timing numbers were generated using ispLEVER design tool. Exact performance may vary with design and tool version. The tool
uses internal parameters that have been characterized but are not tested on every device.
Timing v.G 0.30
LatticeECP/EC External Switching Characteristics (Continued)
Over Recommended Operating Conditions
Parameter Description Device
-5 -4 -3
UnitsMin. Max. Min. Max. Min. Max.
t
DQVAS
t
DQVBS
DQ and DQS Write Timings
t
DQS
DQ
DQS
DQ
DVEDQ
t
DVADQ
DQ and DQS Read Timings
3-16
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
LatticeECP/EC Internal Switching Characteristics
Over Recommended Operating Conditions
Parameter Description
-5 -4 -3
UnitsMin. Max. Min. Max. Min. Max.
PFU/PFF Logic Mode Timing
tLUT4_PFU LUT4 Delay (A to D Inputs to F Output) 0.25 0.31 0.36 ns
tLUT6_PFU LUT6 Delay (A to D Inputs to OFX Output) 0.40 0.48 0.56 ns
tLSR_PFU Set/Reset to Output of PFU 0.81 0.98 1.14 ns
tSUM_PFU Clock to Mux (M0,M1) Input Setup Time 0.12 0.14 0.16 ns
tHM_PFU Clock to Mux (M0,M1) Input Hold Time -0.05 -0.06 -0.06 ns
tSUD_PFU Clock to D Input Setup Time 0.12 0.14 0.16 ns
tHD_PFU Clock to D Input Hold time -0.03 -0.03 -0.04 ns
tCK2Q_PFU Clock to Q Delay, D-type Register Configuration 0.36 0.44 0.51 ns
tLE2Q_PFU Clock to Q Delay Latch Configuration 0.48 0.58 0.68 ns
tLD2Q_PFU D to Q Throughput Delay when Latch is Enabled 0.50 0.60 0.69 ns
PFU Dual Port Memory Mode Timing
tCORAM_PFU Clock to Output 0.36 0.44 0.51 ns
tSUDATA_PFU Data Setup Time -0.20 -0.24 -0.28 ns
tHDATA_PFU Data Hold Time 0.26 0.31 0.36 ns
tSUADDR_PFU Address Setup Time -0.51 -0.62 -0.72 ns
tHADDR_PFU Address Hold Time 0.64 0.77 0.90 ns
tSUWREN_PFU Write/Read Enable Setup Time -0.24 -0.29 -0.34 ns
tHWREN_PFU Write/Read Enable Hold Time 0.30 0.36 0.42 ns
PIC Timing
PIO Input/Output Buffer Timing
tIN_PIO Input Buffer Delay 0.56 0.67 0.78 ns
tOUT_PIO Output Buffer Delay 1.92 2.31 2.69 ns
IOLOGIC Input/Output Timing
tSUI_PIO Input Register Setup Time (Data Before Clock) 0.90 1.08 1.26 ns
tHI_PIO Input Register Hold Time (Data after Clock) 0.62 0.74 0.87 ns
tCOO_PIO Output Register Clock to Output Delay 0.33 0.40 0.46 ns
tSUCE_PIO Input Register Clock Enable Setup Time -0.10 -0.12 -0.14 ns
tHCE_PIO Input Register Clock Enable Hold Time 0.12 0.14 0.17 ns
tSULSR_PIO Set/Reset Setup Time 0.18 0.21 0.25 ns
tHLSR_PIO Set/Reset Hold Time -0.15 -0.18 -0.21 ns
EBR Timing
tCO_EBR Clock to Output from Address or Data 3.64 4.37 5.10 ns
tCOO_EBR Clock to Output from EBR output Register 0.74 0.88 1.03 ns
tSUDATA_EBR Setup Data to EBR Memory -0.29 -0.35 -0.41 ns
tHDATA_EBR Hold Data to EBR Memory 0.37 0.44 0.52 ns
tSUADDR_EBR Setup Address to EBR Memory -0.29 -0.35 -0.41 ns
tHADDR_EBR Hold Address to EBR Memory 0.37 0.45 0.52 ns
tSUWREN_EBR Setup Write/Read Enable to EBR Memory -0.18 -0.22 -0.26 ns
tHWREN_EBR Hold Write/Read Enable to EBR Memory 0.23 0.28 0.33 ns
3-17
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
tSUCE_EBR Clock Enable Setup Time to EBR Output
Register 0.18 0.21 0.25 ns
tHCE_EBR Clock Enable Hold Time to EBR Output Register -0.14 -0.17 -0.20 ns
tRSTO_EBR Reset To Output Delay Time from EBR Output
Register 1.47 1.76 2.05 ns
PLL Parameters
tRSTREC Reset Recovery to Rising Clock 1.00 1.00 1.00 ns
tRSTSU Reset Signal Setup Time 1.00 1.00 1.00 ns
DSP Block Timing2, 3
tSUI_DSP Input Register Setup Time -0.38 -0.30 -0.23 ns
tHI_DSP Input Register Hold Time 0.71 0.86 1.00 ns
tSUP_DSP Pipeline Register Setup Time 3.31 3.98 4.64 ns
tHP_DSP Pipeline Register Hold Time 0.71 0.86 1.00 ns
tSUO_DSP4Output Register Setup Time 5.54 6.64 7.75 ns
tHO_DSP4Output Register Hold Time 0.71 0.86 1.00 ns
tCOI_DSP4Input Register Clock to Output Time 7.50 9.00 10.50 ns
tCOP_DSP4Pipeline Register Clock to Output Time 4.66 5.60 6.53 ns
tCOO_DSP Output Register Clock to Output Time 1.47 1.77 2.06 ns
tSUADSUB AdSub Input Register Setup Time -0.38 -0.30 -0.23 ns
tHADSUB AdSub Input Register Hold Time 0.71 0.86 1.00 ns
1. Internal parameters are characterized but not tested on every device.
2. These parameters apply to LatticeECP devices only.
3. DSP Block is configured in Multiply Add/Sub 18 x 18 Mode.
4. These parameters include the Adder Subtractor block in the path.
Timing v.G 0.30
LatticeECP/EC Internal Switching Characteristics (Continued)
Over Recommended Operating Conditions
Parameter Description
-5 -4 -3
UnitsMin. Max. Min. Max. Min. Max.
3-18
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Timing Diagrams
PFU Timing Diagrams
Figure 3-6. Slice Single/Dual Port Write Cycle Timing
Figure 3-7. Slice Single /Dual Port Read Cycle Timing
CK
D
WRE
D
DI[1:0]
DO[1:0]
AD
AD[3:0]
Old Data
WRE
D
DO[1:0]
AD
AD[3:0]
Old Data
3-19
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
EBR Memory Timing Diagrams
Figure 3-8. Read/Write Mode (Normal)
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive edge of the clock.
Figure 3-9. Read/Write Mode with Input and Output Registers
A0 A1 A0 A1
D0 D1
DOA
A0
t
CO_EBR
t
CO_EBR
t
CO_EBR
t
SU
t
H
D0 D1 D0
DIA
ADA
WEA
CSA
CLKA
A0 A1 A0 A0
D0 D1
output is only updated during a read cycle
A1
D0 D1
Mem(n) data from previous read
DIA
ADA
WEA
CSA
CLKA
DOA (Regs)
tSU tH
tCOO_EBR tCOO_EBR
3-20
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Figure 3-10. Read Before Write (SP Read/Write on Port A, Input Registers Only)
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive edge of the clock.
Figure 3-11. Write Through (SP Read/Write On Port A, Input Registers Only)
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive edge of the clock.
A0 A1 A0 A1
D0 D1
D2
DOA
A0
D2 D3 D1
old A0 Data old A1 Data D0 D1
DIA
ADA
WEA
CSA
CLKA
tSU tH
tACCESS tACCESS tACCESS tACCESS tACCESS
A0 A1 A0
D0 D1
D4
tSU
tACCESS tACCESS tACCESS
tH
D2 D3 D4
D0 D1 D2
Data from Prev Read
or Write
Three consecutive writes to A0
D3
DOA
DIA
ADA
WEA
CSA
CLKA
tACCESS
3-21
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
LatticeECP/EC Family Timing Adders1, 2, 3
Over Recommended Operating Conditions
Buffer Type Description -5 -4 -3 Units
Input Adjusters
LVDS25 LVDS 0.41 0.50 0.58 ns
BLVDS25 BLVDS 0.41 0.50 0.58 ns
LVPECL33 LVPECL 0.50 0.60 0.70 ns
HSTL18_I HSTL_18 class I 0.41 0.49 0.57 ns
HSTL18_II HSTL_18 class II 0.41 0.49 0.57 ns
HSTL18_III HSTL_18 class III 0.41 0.49 0.57 ns
HSTL18D_I Differential HSTL 18 class I 0.37 0.44 0.52 ns
HSTL18D_II Differential HSTL 18 class II 0.37 0.44 0.52 ns
HSTL18D_III Differential HSTL 18 class III 0.37 0.44 0.52 ns
HSTL15_I HSTL_15 class I 0.40 0.48 0.56 ns
HSTL15_III HSTL_15 class III 0.40 0.48 0.56 ns
HSTL15D_I Differential HSTL 15 class I 0.37 0.44 0.51 ns
HSTL15D_III Differential HSTL 15 class III 0.37 0.44 0.51 ns
SSTL33_I SSTL_3 class I 0.46 0.55 0.64 ns
SSTL33_II SSTL_3 class II 0.46 0.55 0.64 ns
SSTL33D_I Differential SSTL_3 class I 0.39 0.47 0.55 ns
SSTL33D_II Differential SSTL_3 class II 0.39 0.47 0.55 ns
SSTL25_I SSTL_2 class I 0.43 0.51 0.60 ns
SSTL25_II SSTL_2 class II 0.43 0.51 0.60 ns
SSTL25D_I Differential SSTL_2 class I 0.38 0.45 0.53 ns
SSTL25D_II Differential SSTL_2 class II 0.38 0.45 0.53 ns
SSTL18_I SSTL_18 class I 0.40 0.48 0.56 ns
SSTL18D_I Differential SSTL_18 class I 0.37 0.44 0.51 ns
LVTTL33 LVTTL 0.07 0.09 0.10 ns
LVCMOS33 LVCMOS 3.3 0.07 0.09 0.10 ns
LVCMOS25 LVCMOS 2.5 0.00 0.00 0.00 ns
LVCMOS18 LVCMOS 1.8 0.07 0.09 0.10 ns
LVCMOS15 LVCMOS 1.5 0.24 0.29 0.33 ns
LVCMOS12 LVCMOS 1.2 1.27 1.52 1.77 ns
PCI33 PCI 0.07 0.09 0.10 ns
Output Adjusters
LVDS25E LVDS 2.5 E 0.12 0.14 0.17 ns
LVDS25 LVDS 2.5 -0.44 -0.53 -0.62 ns
BLVDS25 BLVDS 2.5 0.33 0.40 0.46 ns
LVPECL33 LVPECL 3.3 0.20 0.24 0.28 ns
HSTL18_I HSTL_18 class I -0.10 -0.12 -0.14 ns
HSTL18_II HSTL_18 class II 0.06 0.07 0.08 ns
HSTL18_III HSTL_18 class III 0.15 0.19 0.22 ns
HSTL18D_I Differential HSTL 18 class I -0.10 -0.12 -0.14 ns
HSTL18D_II Differential HSTL 18 class II 0.06 0.07 0.08 ns
HSTL18D_III Differential HSTL 18 class III 0.15 0.19 0.22 ns
HSTL15_I HSTL_15 class I 0.08 0.10 0.11 ns
3-22
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
HSTL15_II HSTL_15 class II 0.10 0.12 0.14 ns
HSTL15_III HSTL_15 class III 0.10 0.12 0.14 ns
HSTL15D_I Differential HSTL 15 class I 0.08 0.10 0.11 ns
HSTL15D_III Differential HSTL 15 class III 0.10 0.12 0.14 ns
SSTL33_I SSTL_3 class I -0.05 -0.06 -0.07 ns
SSTL33_II SSTL_3 class II 0.40 0.48 0.56 ns
SSTL33D_I Differential SSTL_3 class I -0.05 -0.06 -0.07 ns
SSTL33D_II Differential SSTL_3 class II 0.40 0.48 0.56 ns
SSTL25_I SSTL_2 class I 0.05 0.07 0.08 ns
SSTL25_II SSTL_2 class II 0.25 0.30 0.35 ns
SSTL25D_I Differential SSTL_2 class I 0.05 0.07 0.08 ns
SSTL25D_II Differential SSTL_2 class II 0.25 0.30 0.35 ns
SSTL18_I SSTL_1.8 class I 0.01 0.01 0.01 ns
SSTL18D_I Differential SSTL_1.8 class I 0.01 0.01 0.01 ns
LVTTL33_4mA LVTTL 4mA drive 0.09 0.11 0.13 ns
LVTTL33_8mA LVTTL 8mA drive 0.07 0.08 0.09 ns
LVTTL33_12mA LVTTL 12mA drive -0.03 -0.04 -0.05 ns
LVTTL33_16mA LVTTL 16mA drive 0.36 0.43 0.51 ns
LVTTL33_20mA LVTTL 20mA drive 0.28 0.33 0.39 ns
LVCMOS33_4mA LVCMOS 3.3 4mA drive 0.09 0.11 0.13 ns
LVCMOS33_8mA LVCMOS 3.3 8mA drive 0.07 0.08 0.09 ns
LVCMOS33_12mA LVCMOS 3.3 12mA drive -0.03 -0.04 -0.05 ns
LVCMOS33_16mA LVCMOS 3.3 16mA drive 0.36 0.43 0.51 ns
LVCMOS33_20mA LVCMOS 3.3 20mA drive 0.28 0.33 0.39 ns
LVCMOS25_4mA LVCMOS 2.5 4mA drive 0.18 0.21 0.25 ns
LVCMOS25_8mA LVCMOS 2.5 8mA drive 0.10 0.12 0.14 ns
LVCMOS25_12mA LVCMOS 2.5 12mA drive 0.00 0.00 0.00 ns
LVCMOS25_16mA LVCMOS 2.5 16mA drive 0.22 0.26 0.31 ns
LVCMOS25_20mA LVCMOS 2.5 20mA drive 0.14 0.16 0.19 ns
LVCMOS18_4mA LVCMOS 1.8 4mA drive 0.15 0.18 0.21 ns
LVCMOS18_8mA LVCMOS 1.8 8mA drive 0.06 0.08 0.09 ns
LVCMOS18_12mA LVCMOS 1.8 12mA drive 0.01 0.01 0.01 ns
LVCMOS18_16mA LVCMOS 1.8 16mA drive 0.16 0.19 0.22 ns
LVCMOS15_4mA LVCMOS 1.5 4mA drive 0.26 0.31 0.36 ns
LVCMOS15_8mA LVCMOS 1.5 8mA drive 0.04 0.04 0.05 ns
LVCMOS12_2mA LVCMOS 1.2 2mA drive 0.36 0.43 0.50 ns
LVCMOS12_6mA LVCMOS 1.2 6mA drive 0.08 0.10 0.11 ns
LVCMOS12_4mA LVCMOS 1.2 4mA drive 0.36 0.43 0.50 ns
PCI33 PCI33 1.05 1.26 1.46 ns
1. Timing adders are characterized but not tested on every device.
2. LVCMOS timing measured with the load specified in Switching Test Conditions table of this document.
3. All other standards according to the appropriate specification.
Timing v.G 0.30
LatticeECP/EC Family Timing Adders1, 2, 3 (Continued)
Over Recommended Operating Conditions
Buffer Type Description -5 -4 -3 Units
3-23
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
sysCLOCK PLL Timing
Over Recommended Operating Conditions
Parameter Description Conditions Min. Typ. Max. Units
fIN Input Clock Frequency (CLKI, CLKFB) 25 420 MHz
fOUT Output Clock Frequency (CLKOP, CLKOS) 25 420 MHz
fOUT2 K-Divider Output Frequency (CLKOK) 0.195 210 MHz
fVCO PLL VCO Frequency 420 840 MHz
fPFD Phase Detector Input Frequency 25 MHz
AC Characteristics
tDT Output Clock Duty Cycle Default Duty Cycle
Elected3 45 50 55 %
tPH4 Output Phase Accuracy 0.05 UI
tOPJIT1 Output Clock Period Jitter fOUT >= 100MHz +/- 125 ps
fOUT < 100MHz 0.02 UIPP
tSK Input Clock to Output Clock Skew Divider ratio = integer +/- 200 ps
tWOutput Clock Pulse Width At 90% or 10%3 1—ns
tLOCK2 PLL Lock-in Time 150 µs
tPA Programmable Delay Unit 100 250 450 ps
tIPJIT Input Clock Period Jitter +/- 200 ps
tFBKDLY External Feedback Delay 10 ns
tHI Input Clock High Time 90% to 90% 0.5 ns
tLO Input Clock Low Time 10% to 10% 0.5 ns
tRST RST Pulse Width 10 ns
1. Jitter sample is taken over 10,000 samples of the primary PLL output with clean reference clock.
2. Output clock is valid after tLOCK for PLL reset and dynamic delay adjustment.
3. Using LVDS output buffers.
4. Relative to CLKOP.
Timing v.G 0.30
3-24
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
LatticeECP/EC sysCONFIG Port Timing Specifications
Over Recommended Operating Conditions
Parameter Description Min. Typ. Max. Units
sysCONFIG Byte Data Flow
tSUCBDI Byte D[0:7] Setup Time to CCLK 7 ns
tHCBDI Byte D[0:7] Hold Time to CCLK 1 ns
tCODO Clock to Dout in Flowthrough Mode 12 ns
tSUCS CS[0:1] Setup Time to CCLK 7 ns
tHCS CS[0:1] Hold Time to CCLK 1 ns
tSUWD Write Signal Setup Time to CCLK 7 ns
tHWD Write Signal Hold Time to CCLK 1 ns
tDCB CCLK to BUSY Delay Time 12 ns
tCORD Clock to Out for Read Data 12 ns
sysCONFIG Byte Slave Clocking
tBSCH Byte Slave Clock Minimum High Pulse 6 ns
tBSCL Byte Slave Clock Minimum Low Pulse 9 ns
tBSCYC Byte Slave Clock Cycle Time 15 ns
tSUSCDI Din Setup time to CCLK Slave Mode 7 ns
tHSCDI Din Hold Time to CCLK Slave Mode 1 ns
tCODO Clock to Dout in Flowthrough Mode 12 ns
sysCONFIG Serial (Bit) Data Flow
tSUMCDI Din Setup time to CCLK Master Mode 7 ns
tHMCDI Din Hold Time to CCLK Master Mode 1 ns
sysCONFIG Serial Slave Clocking
tSSCH Serial Slave Clock Minimum High Pulse 6 ns
tSSCL Serial Slave Clock Minimum Low Pulse 6 ns
sysCONFIG POR, Initialization and Wake Up
tICFG Minimum Vcc to INIT High 50 ms
tVMC Time from tICFG to Valid Master Clock 2 us
tPRGMRJ Program Pin Pulse Rejection 8 ns
tPRGM PROGRAMN Low Time to Start Configuration 25 ns
tDINIT INIT Low Time 1 ms
tDPPINIT Delay Time from PROGRAMN Low to INIT Low 37 ns
tDINITD Delay Time from PROGRAMN Low to DONE Low 37 ns
tIODISS User I/O Disable from PROGRAMN Low 35 ns
tIOENSS User I/O Enabled Time from CCLK Edge During Wake Up
Sequence 25 ns
tMWC Additional Wake Master Clock Signals after Done Pin High 120 cycles
tSUCFG CFG to INITN Setup Time 100 ns
tHCFG CFG to INITN Hold Time 100 ns
sysCONFIG SPI Port
tCFGX Init High to CCLK Low 80 ns
tCSSPI Init High to CSSPIN Low 2 us
tCSCCLK CCLK Low Before CSSPIN Low 0 - ns
tSOCDO CCLK Low to Output Valid 15 ns
3-25
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Master Clock
tSOE CSSPIN Active Setup Time 300 ns
tCSPID CSSPIN Low to First Clock Edge Setup Time 300+3cyc 600+6cyc ns
fMAXSPI Max Frequency for SPI 25 MHz
tSUSPI SOSPI Data Setup Time Before CCLK 7 ns
tHSPI SOSPI Data Hold Time After CCLK 1 ns
Timing v.G 0.30
Clock Mode Min. Typ. Max. Units
2.5MHz 1.75 2.5 3.25 MHz
5 MHz 3.78 5.4 7.02 MHz
10 MHz 7 10 13 MHz
15 MHz 10.5 15 19.5 MHz
20 MHz 142026MHz
25 MHz 18.2 26 33.8 MHz
30 MHz 213039MHz
35 MHz 23.8 34 44.2 MHz
40 MHz 28.7 41 53.3 MHz
45 MHz 31.5 45 58.5 MHz
50 MHz 35.7 51 66.3 MHz
55 MHz 38.5 55 71.5 MHz
60 MHz 426078MHz
Duty Cycle 40 60 %
Timing v.G 0.30
LatticeECP/EC sysCONFIG Port Timing Specifications (Continued)
Over Recommended Operating Conditions
Parameter Description Min. Typ. Max. Units
3-26
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Figure 3-12. sysCONFIG Parallel Port Read Cycle
Figure 3-13. sysCONFIG Parallel Port Write Cycle
CCLK
1
CS1N
CSN
WRITEN
BUSY
D[0:7]
tSUCS tHCS
tSUWD
tCORD
tDCB
tHWD
tBSCYC
tBSCH
tBSCL
1. In Master Parallel Mode the FPGA provides CCLK. In Slave Parallel Mode the external device provides CCLK.
Byte 0 Byte 1 Byte 2 Byte n
CCLK 1
CS1N
CSN
WRITEN
BUSY
D[0:7]
tSUCS tHCS
tSUWD
tHCBDI
tDCB
tHWD
tBSCYC
tBSCH
tBSCL
tSUCBDI
Byte 0 Byte 1 Byte 2 Byte n
1. In Master Parallel Mode the FPGA provides CCLK. In Slave Parallel Mode the external device provides CCLK.
3-27
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Figure 3-14. sysCONFIG Master Serial Port Timing
Figure 3-15. sysCONFIG Slave Serial Port Timing
Figure 3-16. Power-On-Reset (POR) Timing
CCLK (output)
DIN
DOUT
tSUMCDI
tHMCDI
tCODO
CCLK (input)
DIN
DOUT
tSUSCDI
tHSCDI
tCODO
tSSCL tSSCH
CCLK
2
DONE
VCC/VCCAUX
1
CFG[2:0]
3
tICFG
Valid
INITN
tVMC
tSUCFG tHCFG
1. Time taken from V
CC
or V
CCAUX
, whichever is the last to reach its V
MIN
.
2. Device is in a Master Mode.
3. The CFG pins are normally static (hard wired).
3-28
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Figure 3-17. Configuration from PROGRAMN Timing
Figure 3-18. Wake-Up Timing
Figure 3-19. sysCONFIG SPI Port Sequence
CCLK
DONE
PROGRAMN
CFG[2:0]
tPRGMRJ
Valid
INITN
tSUCFG tHCFG
1. The CFG pins are normally static (hard wired)
tDPPINIT
tDINITD
tDINIT
tIODISS
USER I/O
CCLK
DONE
PROGRAMN
USER I/O
INITN
tIOENSS
Wake-Up
tMWC
VCC
t
ICFG
t
CSCCLK
t
SOE
t
SOCDO
t
CSPID
t
CSSPI
t
CFGX
t
DINIT
t
DPPINIT
PROGRAMN
DONE
INITN
CSSPIN
CCLK
SISPI/BUSY
D7/SPID0
D7 D5 D4 D3 D2 D1 D0
D6
XXX Valid Bitstream
Clock 127 Clock 128
0 1 2 3 4 5 6 7
0
t
PRGM
Capture
CFGx
Capture
OPCODE
t
DINITD
3-29
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
JTAG Port Timing Specifications
Over Recommended Operating Conditions
Figure 3-20. JTAG Port Timing Waveforms
Symbol Parameter Min Max Units
fMAX TCK clock frequency 25 MHz
tBTCP TCK [BSCAN] clock pulse width 40 ns
tBTCPH TCK [BSCAN] clock pulse width high 20 ns
tBTCPL TCK [BSCAN] clock pulse width low 20 ns
tBTS TCK [BSCAN] setup time 8 ns
tBTH TCK [BSCAN] hold time 10 ns
tBTRF TCK [BSCAN] rise/fall time 50 mV/ns
tBTCO TAP controller falling edge of clock to valid output 10 ns
tBTCODIS TAP controller falling edge of clock to valid disable 10 ns
tBTCOEN TAP controller falling edge of clock to valid enable 10 ns
tBTCRS BSCAN test capture register setup time 8 ns
tBTCRH BSCAN test capture register hold time 25 ns
tBUTCO BSCAN test update register, falling edge of clock to valid output 25 ns
tBTUODIS BSCAN test update register, falling edge of clock to valid disable 25 ns
tBTUPOEN BSCAN test update register, falling edge of clock to valid enable 25 ns
Timing v.G 0.30
TMS
TDI
TCK
TDO
Data to be
captured
from I/O
Data to be
driven out
to I/O
ataD dilaVataD dilaV
ataD dilaVataD dilaV
Data Captured
t
BTCPH
t
BTCPL
t
BTCOEN
t
BTCRS
t
BTUPOEN
t
BUTCO
t
BTUODIS
t
BTCRH
t
BTCO
t
BTCODIS
t
BTS
t
BTH
t
BTCP
3-30
DC and Switching Characteristics
LatticeECP/EC Family Data Sheet
Switching Test Conditions
Figure 3-21 shows the output test load that is used for AC testing. The specific values for resistance, capacitance,
voltage, and other test conditions are shown in Table 3-6.
Figure 3-21. Output Test Load, LVTTL and LVCMOS Standards
Table 3-6. Test Fixture Required Components, Non-Terminated Interfaces
Test Condition R1CLTiming Ref. VT
LVTTL and other LVCMOS settings (L -> H, H -> L) 0pF
LVCMOS 3.3 = 1.5V
LVCMOS 2.5 = VCCIO/2
LVCMOS 1.8 = VCCIO/2
LVCMOS 1.5 = VCCIO/2
LVCMOS 1.2 = VCCIO/2
LVCMOS 2.5 I/O (Z -> H)
188¾ 0pF
VCCIO/2 VOL
LVCMOS 2.5 I/O (Z -> L) VCCIO/2 VOH
LVCMOS 2.5 I/O (H -> Z) VOH - 0.15 VOL
LVCMOS 2.5 I/O (L -> Z) VOL + 0.15 VOH
Note: Output test conditions for all other interfaces are determined by the respective standards.
DUT
V
T
R1
CL*
Test Point
*CL Includes Test Fixture and Probe Capacitance
www.latticesemi.com 4-1 Pinout Information_02.6
September 2012 Data Sheet
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
Signal Descriptions
Signal Name I/O Description
General Purpose
P[Edge] [Row/Column Number*]_[A/B] I/O
[Edge] indicates the edge of the device on which the pad is located. Valid
edge designations are L (Left), B (Bottom), R (Right), T (Top).
[Row/Column Number] indicates the PFU row or the column of the device on
which the PIC exists. When Edge is T (Top) or (Bottom), only need to specify
Row Number. When Edge is L (Left) or R (Right), only need to specify Col-
umn Number.
[A/B] indicates the PIO within the PIC to which the pad is connected.
Some of these user-programmable pins are shared with special function
pins. These pin when not used as special purpose pins can be programmed
as I/Os for user logic.
During configuration the user-programmable I/Os are tri-stated with an inter-
nal pull-up resistor enabled. If any pin is not used (or not bonded to a pack-
age pin), it is also tri-stated with an internal pull-up resistor enabled after
configuration.
GSRN I Global RESET signal (active low). Any I/O pin can be GSRN.
NC No connect.
GND Ground. Dedicated pins.
VCC Power supply pins for core logic. Dedicated pins.
VCCAUX Auxiliary power supply pin. It powers all the differential and referenced input
buffers. Dedicated pins.
VCCIOx Power supply pins for I/O bank x. Dedicated pins.
VREF1_x, VREF2_x
Reference supply pins for I/O bank x. Pre-determined pins in each bank are
assigned as VREF inputs. When not used, they may be used as I/O pins.
XRES 10K ohm +/-1% resistor must be connected between this pad and ground.
VCCPLL Power supply pin for PLL.þApplicable to ECP/EC33 device.
PLL and Clock Functions (Used as user programmable I/O pins when not in use for PLL or clock pins)
[LOC][num]_PLL[T, C]_IN_A I Reference clock (PLL) input pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A,B,C...at each side.
[LOC][num]_PLL[T, C]_FB_A I Optional feedback (PLL) input pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A,B,C...at each side.
PCLK[T, C]_[n:0]_[3:0] I Primary Clock pads, T = true and C = complement, n per side, indexed by
bank and 0,1,2,3 within bank.
[LOC]DQS[num] I DQS input pads: T (Top), R (Right), B (Bottom), L (Left), DQS, num = ball
function number. Any pad can be configured to be output.
Test and Programming (Dedicated pins)
TMS I Test Mode Select input, used to control the 1149.1 state machine. Pull-up is
enabled during configuration.
TCK I Test Clock input pin, used to clock the 1149.1 state machine. No pull-up
enabled.
LatticeECP/EC Family Data Sheet
Pinout Information
4-2
Pinout Information
LatticeECP/EC Family Data Sheet
TDI I
Test Data in pin. Used to load data into device using 1149.1 state machine.
After power-up, this TAP port can be activated for configuration by sending
appropriate command. (Note: once a configuration port is selected it is
locked. Another configuration port cannot be selected until the power-up
sequence). Pull-up is enabled during configuration.
TDO O Output pin. Test Data out pin used to shift data out of device using 1149.1.
VCCJ —V
CCJ - The power supply pin for JTAG Test Access Port.
Configuration Pads (used during sysCONFIG)
CFG[2:0] I
Mode pins used to specify configuration modes values latched on rising edge
of INITN. During configuration, a pull-up is enabled. These are dedicated
pins.
INITN I/O Open Drain pin. Indicates the FPGA is ready to be configured. During config-
uration, a pull-up is enabled. It is a dedicated pin.
PROGRAMN I Initiates configuration sequence when asserted low. This pin always has an
active pull-up. This is a dedicated pin.
DONE I/O Open Drain pin. Indicates that the configuration sequence is complete, and
the startup sequence is in progress. This is a dedicated pin.
CCLK I/O Configuration Clock for configuring an FPGA in sysCONFIG mode.
BUSY/SISPI I/O Read control command in SPI3 or SPIX mode.
CSN I sysCONFIG chip select (Active low). During configuration, a pull-up is
enabled.
CS1N I sysCONFIG chip select (Active low). During configuration, a pull-up is
enabled.
WRITEN I Write Data on Parallel port (Active low).
D[7:0]/SPID[0:7] I/O sysCONFIG Port Data I/O.
DOUT/CSON O Output for serial configuration data (rising edge of CCLK) when using sys-
CONFIG port.
DI/CSSPIN I/O
Input for serial configuration data (clocked with CCLK) when using sysCON-
FIG port. During configuration, a pull-up is enabled. Output when used in
SPI/SPIX modes.
Signal Descriptions (Cont.)
Signal Name I/O Description
4-3
Pinout Information
LatticeECP/EC Family Data Sheet
PICs and DDR Data (DQ) Pins Associated with the DDR Strobe (DQS) Pin
PICs Associated
with DQS Strobe PIO Within PIC
DDR Strobe (DQS) and
Data (DQ) Pins
P[Edge] [n-4] ADQ
BDQ
P[Edge] [n-3] ADQ
BDQ
P[Edge] [n-2] ADQ
BDQ
P[Edge] [n-1] ADQ
BDQ
P[Edge] [n] A[Edge]DQSn
BDQ
P[Edge] [n+1] ADQ
BDQ
P[Edge] [n+2] ADQ
BDQ
P[Edge] [n+3] ADQ
BDQ
Notes:
1. “n” is a Row/Column PIC number
2. The DDR interface is designed for memories that support one DQS strobe per eight bits of
data. In some packages, all the potential DDR data (DQ) pins may not be available.
3. PIC numbering definitions are provided in the “Signal Names” column of the Signal Descrip-
tions table.
4-4
Pinout Information
LatticeECP/EC Family Data Sheet
Pin Information Summary
LFEC1 LFEC3 LFECP6/EC6 LFECP/EC10
Pin Type
100-
TQFP
144-
TQFP
208-
PQFP
100-
TQFP
144-
TQFP
208-
PQFP
256-
fpBGA
144-
TQFP
208-
PQFP
256-
fpBGA
484-
fpBGA
208-
PQFP
256-
fpBGA
484-
fpBGA
Single Ended User
I/O 67 97 112 67 97 145 160 97 147 195 224 147 195 288
Differential Pair User
I/O 29 46 56 29 46 72 80 46 72 97 112 72 97 144
Configu-
ration
Dedicated 13 13 13 13 13 13 13 13 13 13 13 13 13 13
Muxed 48 48 48 48 48 48 48 48 48 48 48 56 56 56
TAP 555555 5555 555 5
Dedicated (total
without supplies) 80 110 160 80 110 160 208 110 160 208 373 160 208 373
VCC 2 3 3 2 3 3 10 4 4 10 20 6 10 20
VCCAUX 2 2 2 4 4 4 4 2 4 2 12 4 2 12
VCCPLL 000000 0000 000 0
VCCIO
Bank0 1 2 2 1 2 3 2 2 3 2 4 3 2 4
Bank1 1 2 2 1 2 2 2 2 2 2 4 2 2 4
Bank2 1 1 1 2 2 2 2 1 2 2 4 2 2 4
Bank3 1 2 2 1 2 2 2 2 2 2 4 2 2 4
Bank4 1 2 2 1 2 2 2 2 2 2 4 2 2 4
Bank5 1 2 2 1 2 2 2 2 3 2 4 3 2 4
Bank6 1 2 2 1 2 2 2 2 2 2 4 2 2 4
Bank7 1 1 1 2 2 2 2 1 2 2 4 2 2 4
GND, GND0-GND7 8 13 13 8 13 16 20 14 18 20 44 20 20 44
NC 0 2 51 0 2 9 35 0 4 0 139 0 0 75
Single
Ended/
Differen-
tial I/O
Pair per
Bank
Bank 0 11/5 14/7 16/8 11/5 14/7 26/13 32/16 14/7 26/13 32/16 32/16 26/13 32/16 48/24
Bank 1 11/5 13/6 16/8 11/5 13/6 16/8 16/8 13/6 17/8 18/9 32/16 17/8 18/9 32/16
Bank 2 3/1 8/4 8/4 3/1 8/4 14/7 16/8 8/4 14/7 16/8 16/8 14/7 16/8 32/16
Bank 3 8/4 13/6 16/8 8/4 13/6 16/8 16/8 13/6 16/8 32/16 32/16 16/8 32/16 32/16
Bank 4 12/4 14/6 16/8 12/4 14/6 16/8 16/8 14/6 17/8 17/8 32/16 17/8 17/8 32/16
Bank 5 9/4 13/6 16/8 9/4 13/6 26/13 32/16 13/6 26/13 32/16 32/16 26/13 32/16 48/24
Bank 6 5/2 14/7 16/8 5/2 14/7 16/8 16/8 14/7 16/8 32/16 32/16 16/8 32/16 32/16
Bank 7 8/4 8/4 8/4 8/4 8/4 15/7 16/8 8/4 15/7 16/8 16/8 15/7 16/8 32/16
VCCJ 111111 1111 111 1
Note: During configuration the user-programmable I/Os are tri-stated with an internal pull-up resistor enabled. If any pin is not used (or not
bonded to a package pin), it is also tri-stated with an internal pull-up resistor enabled after configuration.
4-5
Pinout Information
LatticeECP/EC Family Data Sheet
Pin Information Summary (Cont.)
LFECP/EC15 LFECP20/EC20 LFECP/EC33
Pin Type 256-fpBGA 484-fpBGA 484-fpBGA 672-fpBGA 484-fpBGA 672-fpBGA
Single Ended User I/O 195 352 360 400 360 496
Differential Pair User I/O 97 176 180 200 180 248
Configuration Dedicated131313131313
Muxed 565656565656
TAP 555555
Dedicated (total without supplies) 208 373 373 509 373 509
VCC 10 20 20 32 16 28
VCCAUX 2 1212201220
VCCPLL 000044
VCCIO
Bank0 244646
Bank1 244646
Bank2 244646
Bank3 244646
Bank4 244646
Bank5 244646
Bank6 244646
Bank7 244646
GND, GND0-GND7 20 44 44 63 44 63
NC 0 11 3 96 3 0
Single Ended/
Differential I/O
Pair per Bank
Bank0 32/16 48/24 48/24 64/32 48/24 64/32
Bank1 18/9 48/24 48/24 48/24 48/24 64/32
Bank2 16/8 40/20 40/20 40/20 40/20 56/28
Bank3 32/16 40/20 44/22 48/24 44/22 64/32
Bank4 17/8 48/24 48/24 48/24 48/24 64/32
Bank5 32/16 48/24 48/24 64/32 48/24 64/32
Bank6 32/16 40/20 44/22 48/24 44/22 64/32
Bank7 16/8 40/20 40/20 40/20 40/20 56/28
VCCJ 111111
Note: During configuration the user-programmable I/Os are tri-stated with an internal pull-up resistor enabled. If any pin is not used (or not
bonded to a package pin), it is also tri-stated with an internal pull-up resistor enabled after configuration.
4-6
Pinout Information
LatticeECP/EC Family Data Sheet
Power Supply and NC Connections
Signals 100 TQFP 144 TQFP 208 PQFP 256 fpBGA
VCC 12, 64 EC1, EC3: 13, 92, 99
ECP/EC6: 11, 13, 92, 99
EC1, EC3: 26, 128, 135
ECP/EC6: 24, 26, 128,
135
ECP/EC10: 5, 24, 26,
128, 135, 152
E12, E5, E8, M12, M5,
M9, F6, F11, L11, L6
VCCIO0 100 136, 143 EC1: 187, 208
EC3, ECP/EC6, ECP/
EC10: 187, 197, 208
F7, F8
VCCIO1 86 110, 125 157, 176 F9, F10
VCCIO2 73 108 EC1: 155
EC3, ECP/EC6, ECP/
EC10: 145, 155
G11, H11
VCCIO3 56 73, 84 106, 120 J11, K11
VCCIO4 38 55, 71 85, 104 L9, L10
VCCIO5 26 38, 44 EC1: 53, 74
EC2, ECP/EC6, ECP/
EC10: 53, 64, 74
L7, L8
VCCIO6 24 24, 36 37, 51 J6, K6
VCCIO7 2 1 EC1: 2
EC3, ECP/EC6, ECP/
EC10: 2, 13
G6, H6
VCCJ 18 19 32 L4
VCCAUX 37, 87 54, 126 EC1: 84, 177
EC3, ECP/EC6, ECP/
EC10: 22, 84, 136, 177
B15, R2
VCCPLL
GND, GND0-GND7 1, 14, 25, 35, 51, 68, 74,
89
EC1, EC3: 15, 28, 37,
52, 63, 72, 80, 96, 98,
109, 117, 128, 144
ECP/EC6: 12, 15, 28,
37, 52, 63, 72, 80, 96,
98, 109, 117, 128, 144
EC1: 1, 28, 41, 52, 82,
93, 105, 116, 132, 134,
156, 168, 179
EC3: 1, 28, 41, 52, 72,
82, 93, 105, 116, 132,
134, 138, 156, 168, 179,
189
ECP/EC6: 1, 18, 25, 28,
41, 52, 72, 82, 93, 105,
116, 132, 134, 138, 156,
168, 179, 189
ECP/EC10: 1, 6, 18, 25,
28, 41, 52, 72, 82, 93,
105, 116, 132, 134, 138,
151, 156, 168, 179, 189
A1, A16, G10, G7, G8,
G9, H10, H7, H8, H9,
J10, J7, J8, J9, K10, K7,
K8, K9, T1, T16
NC EC1, EC3: 11, 12
ECP6/EC6: None
EC1: 5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 18, 22, 24,
25, 54, 55, 56, 57, 58,
59, 60, 61, 62, 63, 64,
72, 103, 136, 138, 144,
145, 146, 147, 148, 149,
150, 151, 152, 158, 189,
197, 198, 199, 200, 201,
202, 203, 204, 205, 206,
207
EC3: 5, 6, 18, 24, 25,
103, 151, 152, 158
ECP/EC6: 5, 6, 151, 152
ECP/EC10: None
EC3: G5, H5, F2, F1, H4,
H3, G2, G1, J4, J3, J5,
K5, H2, H1, J2, J1, R12,
H16, H15, G16, G15,
K12, J12, J14, J15, F16,
F15, J13, H13, H14, G14,
E16, E15, B13, C13
ECP/EC10: None
ECP/EC15: None
4-7
Pinout Information
LatticeECP/EC Family Data Sheet
Power Supply and NC Connections (Cont.)
Signals 484 fpBGA 672 fpBGA
VCC J16, J7, K16, K17, K6, K7, L17, L6, M17, M6, N16,
N17, N6, N7, P16, P7, J6, J17, P6, P17
H10, H11, H16, H17, H18, H19, H8, H9, J18, J9,
K8, L19, M19, N7, R20, R7, T19, V18, V8, V9,
W10, W11, W16, W17, W18, W19, W8, W9, K19,
L8, U19, U8
VCCIO0 G11, H10, H11, H9 H12, H13, J10, J11, J12, J13
VCCIO1 G12, H12, H13, H14 H14, H15, J14, J15, J16, J17
VCCIO2 J15, K15, L15, L16 K17, K18, L18, M18, N18, N19
VCCIO3 M15, M16, N15, P15 P18, P19, R18, R19, T18, U18
VCCIO4 R12, R13, R14, T12 V14, V15, V16, V17, W14, W15
VCCIO5 R10, R11, R9, T11 V10, V11, V12, V13, W12, W13
VCCIO6 M7, M8, N8, P8 P8, P9, R8, R9, T9, U9
VCCIO7 J8, K8, L7, L8 K9, L9, M8, M9, N8, N9
VCCJ U2 U6
VCCAUX G15, G16, G7, G8, H16, H7, R16, R7, T15, T16,
T7, T8
G13, H20, H7, J19, J8, K7, L20, M20, M7, N20,
P20, P7, T20, T7, T8, V19, V7, W20, Y13, Y7
VCCPLL ECP/EC20: None
ECP/EC33: J6, J17, P6, P17
ECP/EC20: None
ECP/EC33: K19, L8, U19, U8
GND, GND0-GND7 A1, A22, AB1, AB22, H15, H8, J10, J11, J12, J13,
J14, J9, K10, K11, K12, K13, K14, K9, L10, L11,
L12, L13, L14, L9, M10, M11, M12, M13, M14, M9,
N10, N11, N12, N13, N14, N9, P10, P11, P12,
P13, P14, P9, R15, R8
K10, K11, K12, K13, K14, K15, K16, L10, L11,
L12, L13, L14, L15, L16, L17, M10, M11, M12,
M13, M14, M15, M16, M17, N10, N11, N12, N13,
N14, N15, N16, N17, P10, P11, P12, P13, P14,
P15, P16, P17, R10, R11, R12, R13, R14, R15,
R16, R17, T10, T11, T12, T13, T14, T15, T16,
T17, U10, U11, U12, U13, U14, U15, U16, U17
NC ECP/EC6: C3, B2, E5, F5, D3, C2, F4, G4, E3, D2,
B1, C1, F3, E2, G5, H6, G3, H4, J5, H5, F2, F1,
E1, D1, R6, P5, P3, P4, R1, R2, R5, R4, T1, T2,
R3, T3, V7, T6, V8, U7, W5, U6, AA3, AB3, Y6,
V6, AA5, W6, Y5, Y4, AA4, AB4, W16, U15, V16,
U16, Y17, V17, AB20, AA19, Y16, W17, AA20,
Y19, Y18, W18, T17, U17, T18, R17, R19, R18,
U22, T22, R21, R22, P20, N20, P19, P18, E21,
D22, G21, G20, J18, H19, J19, H20, H17, H18,
D21, C22, G19, G18, F20, F19, E20, D20, C21,
C20, F18, E18, B22, B21, G17, F17, D18, C18,
C19, B20, D17, C16, B19, A20, E17, C17, F16,
E16, F15, D16, A4, B4, C4, C5, D6, B5, E6, C6,
A3, B3, F6, D5, F7, E8, G6, E7, A2, AB2, A21
ECP/EC10: G5, H6, G3, H4, J5, H5, F2, F1, R6,
P5, P3, P4, R2, R1, R5, R4, T1, T2, R3, T3, W16,
U15, V16, U16, Y17, V17, AB20, AA19, Y16, W17,
AA20, Y19, Y18, W18, T17, U17, T18, R17, R19,
R18, U22, T22, R21, R22, P20, N20, P19, P18,
G21, G20, J18, H19, J19, H20, H17, H18, G17,
F17, D18, C18, C19, B20, D17, C16, B19, A20,
E17, C17, F16, E16, F15, D16, A2, AB2, A21
ECP/EC15: T1, T2, R3, T3, T18, R17, R19, R18,
A2, AB2, A21
ECP/EC20: A2, AB2, A21
ECP/EC33: A2, AB2, A21
ECP/EC20: E5, D5, F4, F5, C3, D3, C2, B2, H6,
J7, G5, H5, H3, J3, H2, J2, AA2, AA3, W5, Y5, Y6,
W7, AA4, AB3, AC2, AC3, AA5, AB5, AD3, AD2,
AE1, AD1, AD19, AD20, AC19, AB19, AD21,
AC20, AF25, AE25, AB21, AB20, AE24, AD23,
AD22, AC21, AC22, AB22, AD24, AD25, AE26,
AD26, Y20, Y19, AA23, AA22, AB23, AB24, Y21,
AA21, Y23, Y22, AA24, Y24, J21, J22, J23, H22,
G26, F26, E26, E25, F24, F23, E24, D24, E22,
F22, E21, D22, G20, F20, D21, C21, C23, C22,
B23, C24, D20, E19, B25, B24, B26, A25, C20,
C19
ECP/EC33: None
4-8
Pinout Information
LatticeECP/EC Family Data Sheet
LFEC1, LFEC3 Logic Signal Connections: 100 TQFP
Pin
Number
LFEC1 LFEC3
Pin
Function Bank LVDS Dual Function
Pin
Function Bank LVDS Dual Function
1* GND0
GND7 -
GND0
GND7 -
2 VCCIO7 7 VCCIO7 7
3 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7
4 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7
5PL3A7T PL7A7T
6PL3B7C PL7B7C
7PL4A7T PL8A7T
8PL4B7C PL8B7C
9 PL5A 7 T PCLKT7_0 PL9A 7 T PCLKT7_0
10 PL5B 7 C PCLKC7_0 PL9B 7 C PCLKC7_0
11 XRES 6 XRES 6
12 VCC - VCC -
13 TCK 6 TCK 6
14 GND - GND -
15 TDI6 TDI6
16 TMS6 TMS6
17 TDO6 TDO6
18 VCCJ 6 VCCJ 6
19 PL7A 6 T LLM0_PLLT_IN_A PL11A 6 T LUM0_PLLT_IN_A
20 PL7B 6 C LLM0_PLLC_IN_A PL11B 6 C LUM0_PLLC_IN_A
21 PL8A 6 T LLM0_PLLT_FB_A PL12A 6 T LUM0_PLLT_FB_A
22 PL8B 6 C LLM0_PLLC_FB_A PL12B 6 C LUM0_PLLC_FB_A
23 PL14A 6 VREF1_6 PL18A 6 VREF1_6
24 VCCIO6 6 VCCIO6 6
25* GND5
GND6 -
GND5
GND6 -
26 VCCIO5 5 VCCIO5 5
27PB2A5T PB10A5T
28PB2B5C PB10B5C
29PB3A5T PB11A5T
30PB3B5C PB11B5C
31 PB6A 5 BDQS6 PB14A 5 BDQS14
32 PB8A 5 T VREF2_5 PB16A 5 T VREF2_5
33 PB8B 5 C VREF1_5 PB16B 5 C VREF1_5
34 PB9A 5 T PCLKT5_0 PB17A 5 T PCLKT5_0
35 GND5 5 GND5 5
36 PB9B 5 C PCLKC5_0 PB17B 5 C PCLKC5_0
37 VCCAUX - VCCAUX -
38 VCCIO4 4 VCCIO4 4
39 PB10A 4 T WRITEN PB18A 4 T WRITEN
40 PB10B 4 C CS1N PB18B 4 C CS1N
4-9
Pinout Information
LatticeECP/EC Family Data Sheet
41 PB11A 4 T VREF1_4 PB19A 4 T VREF1_4
42 PB11B 4 C CSN PB19B 4 C CSN
43 PB12B 4 D0/SPID7 PB20B 4 D0/SPID7
44 PB13A 4 T D2/SPID5 PB21A 4 T D2/SPID5
45 PB13B 4 C D1/SPID6 PB21B 4 C D1/SPID6
46 PB14A 4 T BDQS14 PB22A 4 T BDQS22
47 PB14B 4 C D3/SPID4 PB22B 4 C D3/SPID4
48 PB15B 4 D4/SPID3 PB23B 4 D4/SPID3
49 PB16B 4 D5/SPID2 PB24B 4 D5/SPID2
50 PB17B 4 D6/SPID1 PB25B 4 D6/SPID1
51* GND3
GND4 -
GND3
GND4 -
52 PR10B 3 C RLM0_PLLC_FB_A PR14B 3 C RLM0_PLLC_FB_A
53 PR10A 3 T RLM0_PLLT_FB_A PR14A 3 T RLM0_PLLT_FB_A
54 PR9B 3 C RLM0_PLLC_IN_A PR13B 3 C RLM0_PLLC_IN_A
55 PR9A 3 T RLM0_PLLT_IN_A PR13A 3 T RLM0_PLLT_IN_A
56 VCCIO3 3 VCCIO3 3
57 PR8B 3 C DI/CSSPIN PR12B 3 C DI/CSSPIN
58 PR8A 3 T DOUT/CSON PR12A 3 T DOUT/CSON
59 PR7B 3 C BUSY/SISPI PR11B 3 C BUSY/SISPI
60 PR7A 3 T D7/SPID0 PR11A 3 T D7/SPID0
61 CFG2 3 CFG2 3
62 CFG1 3 CFG1 3
63 CFG0 3 CFG0 3
64 VCC - VCC -
65 PROGRAMN 3 PROGRAMN 3
66 CCLK 3 CCLK 3
67 INITN 3 INITN 3
68 GND - GND -
69 DONE 3 DONE 3
70 PR5B 2 C PCLKC2_0 PR9B 2 C PCLKC2_0
71 PR5A 2 T PCLKT2_0 PR9A 2 T PCLKT2_0
72 PR2B 2 VREF1_2 PR2B 2 VREF1_2
73 VCCIO2 2 VCCIO2 2
74 GND2 2 GND2 2
75 PT17B 1 C PT25B 1 C
76 PT17A 1 T PT25A 1 T
77 PT14B 1 C PT22B 1 C
78 PT14A 1 T TDQS14 PT22A 1 T TDQS22
79 PT13A 1 PT21A 1
80 PT12B 1 C PT20B 1 C
81 PT12A 1 T PT20A 1 T
LFEC1, LFEC3 Logic Signal Connections: 100 TQFP (Cont.)
Pin
Number
LFEC1 LFEC3
Pin
Function Bank LVDS Dual Function
Pin
Function Bank LVDS Dual Function
4-10
Pinout Information
LatticeECP/EC Family Data Sheet
82 PT11B 1 C VREF2_1 PT19B 1 C VREF2_1
83 PT11A 1 T VREF1_1 PT19A 1 T VREF1_1
84 PT10B 1 C PT18B 1 C
85 PT10A 1 T PT18A 1 T
86 VCCIO1 1 VCCIO1 1
87 VCCAUX - VCCAUX -
88 PT9B 0 C PCLKC0_0 PT17B 0 C PCLKC0_0
89 GND0 0 GND0 0
90 PT9A 0 T PCLKT0_0 PT17A 0 T PCLKT0_0
91 PT8B 0 C VREF1_0 PT16B 0 C VREF1_0
92 PT8A 0 T VREF2_0 PT16A 0 T VREF2_0
93 PT7B 0 PT15B 0
94 PT6B 0 C PT14B 0 C
95 PT6A 0 T TDQS6 PT14A 0 T TDQS14
96 PT4B 0 C PT12B 0 C
97 PT4A 0 T PT12A 0 T
98 PT2B 0 C PT10B 0 C
99 PT2A 0 T PT10A 0 T
100 VCCIO0 0 VCCIO0 0
*Double bonded to the pin.
LFEC1, LFEC3 Logic Signal Connections: 100 TQFP (Cont.)
Pin
Number
LFEC1 LFEC3
Pin
Function Bank LVDS Dual Function
Pin
Function Bank LVDS Dual Function
4-11
Pinout Information
LatticeECP/EC Family Data Sheet
LFEC1, LFEC3, LFECP/EC6 Logic Signal Connections: 144 TQFP
Pin
Number
LFEC1 LFEC3 LFECP6/EC6
Pin Function Bank
LVD
S Dual Function Pin Function Bank
LVD
S Dual Function Pin Function Bank
LVD
S Dual Function
1 VCCIO7 7 VCCIO7 7 VCCIO7 7
2 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7
3 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7
4 PL3A 7 T PL7A 7 T PL7A 7 T
5 PL3B 7C PL7B 7C PL7B 7C
6 PL4A 7 T PL8A 7 T PL8A 7 T
7 PL4B 7C PL8B 7C PL8B 7C
8 PL5A 7 T PCLKT7_0 PL9A 7 T PCLKT7_0 PL9A 7 T PCLKT7_0
9 PL5B 7 C PCLKC7_0 PL9B 7 C PCLKC7_0 PL9B 7 C PCLKC7_0
10 XRES 6 XRES 6 XRES 6
11 NC - NC - VCC -
12 NC - NC - GND -
13 VCC - VCC - VCC -
14 TCK6 TCK6 TCK6
15 GND - GND - GND -
16 TDI 6 TDI 6 TDI 6
17 TMS 6 TMS 6 TMS 6
18 TDO 6 TDO 6 TDO 6
19 VCCJ 6 VCCJ 6 VCCJ 6
20 PL7A 6 T LLM0_PLLT_IN_A PL11A 6 T LLM0_PLLT_IN_A PL20A 6 T LLM0_PLLT_IN_A
21 PL7B 6 C LLM0_PLLC_IN_A PL11B 6 C LLM0_PLLC_IN_A PL20B 6 C LLM0_PLLC_IN_A
22 PL8A 6 T LLM0_PLLT_FB_A PL12A 6 T LLM0_PLLT_FB_A PL21A 6 T LLM0_PLLT_FB_A
23 PL8B 6 C LLM0_PLLC_FB_A PL12B 6 C LLM0_PLLC_FB_A PL21B 6 C LLM0_PLLC_FB_A
24 VCCIO6 6 VCCIO6 6 VCCIO6 6
25 PL9A 6 T PL13A 6 T PL22A 6 T
26 PL9B 6 C PL13B 6 C PL22B 6 C
27 PL10A 6 T PL14A 6 T PL23A 6 T
28 GND6 6 GND6 6 GND6 6
29 PL10B 6 C PL14B 6 C PL23B 6 C
30 PL11A 6 T LDQS11 PL15A 6 T LDQS15 PL24A 6 T LDQS24
31 PL11B 6 C PL15B 6 C PL24B 6 C
32 PL12A 6 T PL16A 6 T PL25A 6 T
33 PL12B 6 C PL16B 6 C PL25B 6 C
34 PL14A 6 T VREF1_6 PL18A 6 T VREF1_6 PL27A 6 T VREF1_6
35 PL14B 6 C VREF2_6 PL18B 6 C VREF2_6 PL27B 6 C VREF2_6
36 VCCIO6 6 VCCIO6 6 VCCIO6 6
37* GND5
GND6 - GND5
GND6 - GND5
GND6 -
38 VCCIO5 5 VCCIO5 5 VCCIO5 5
39 PB2A 5 T PB10A 5 T PB10A 5 T
40 PB2B 5 C PB10B 5 C PB10B 5 C
41 PB3A 5 T PB11A 5 T PB11A 5 T
42 PB3B 5 C PB11B 5 C PB11B 5 C
43 PB5B 5 PB13B 5 PB13B 5
44 VCCIO5 5 VCCIO5 5 VCCIO5 5
45 PB6A 5 T BDQS6 PB14A 5 T BDQS14 PB14A 5 T BDQS14
46 PB6B 5 C PB14B 5 C PB14B 5 C
47 PB7A 5 T PB15A 5 T PB15A 5 T
48 PB7B 5 C PB15B 5 C PB15B 5 C
49 PB8A 5 T VREF2_5 PB16A 5 T VREF2_5 PB16A 5 T VREF2_5
4-12
Pinout Information
LatticeECP/EC Family Data Sheet
50 PB8B 5 C VREF1_5 PB16B 5 C VREF1_5 PB16B 5 C VREF1_5
51 PB9A 5 T PCLKT5_0 PB17A 5 T PCLKT5_0 PB17A 5 T PCLKT5_0
52 GND5 5 GND5 5 GND5 5
53 PB9B 5 C PCLKC5_0 PB17B 5 C PCLKC5_0 PB17B 5 C PCLKC5_0
54 VCCAUX - VCCAUX - VCCAUX -
55 VCCIO4 4 VCCIO4 4 VCCIO4 4
56 PB10A 4 T WRITEN PB18A 4 T WRITEN PB18A 4 T WRITEN
57 PB10B 4 C CS1N PB18B 4 C CS1N PB18B 4 C CS1N
58 PB11A 4 T VREF1_4 PB19A 4 T VREF1_4 PB19A 4 T VREF1_4
59 PB11B 4 C CSN PB19B 4 C CSN PB19B 4 C CSN
60 PB12A 4 T VREF2_4 PB20A 4 T VREF2_4 PB20A 4 T VREF2_4
61 PB12B 4 C D0/SPID7 PB20B 4 C D0/SPID7 PB20B 4 C D0/SPID7
62 PB13A 4 T D2/SPID5 PB21A 4 T D2/SPID5 PB21A 4 T D2/SPID5
63 GND4 4 GND4 4 GND4 4
64 PB13B 4 C D1/SPID6 PB21B 4 C D1/SPID6 PB21B 4 C D1/SPID6
65 PB14A 4 T BDQS14 PB22A 4 T BDQS22 PB22A 4 T BDQS22
66 PB14B 4 C D3/SPID4 PB22B 4 C D3/SPID4 PB22B 4 C D3/SPID4
67 PB15A 4 T PB23A 4 T PB23A 4 T
68 PB15B 4 C D4/SPID3 PB23B 4 C D4/SPID3 PB23B 4 C D4/SPID3
69 PB16B 4 D5/SPID2 PB24B 4 D5/SPID2 PB24B 4 D5/SPID2
70 PB17B 4 D6/SPID1 PB25B 4 D6/SPID1 PB25B 4 D6/SPID1
71 VCCIO4 4 VCCIO4 4 VCCIO4 4
72* GND3
GND4 - GND3
GND4 - GND3
GND4 -
73 VCCIO3 3 VCCIO3 3 VCCIO3 3
74 PR14A 3 VREF1_3 PR18A 3 VREF1_3 PR27A 3 VREF1_3
75 PR12B 3 C PR16B 3 C PR25B 3 C
76 PR12A 3 T PR16A 3 T PR25A 3 T
77 PR11B 3 C PR15B 3 C PR24B 3 C
78 PR11A 3 T RDQS11 PR15A 3 T RDQS15 PR24A 3 T RDQS24
79 PR10B 3 C RLM0_PLLC_FB_A PR14B 3 C RLM0_PLLC_FB_A PR23B 3 C RLM0_PLLC_FB_A
80 GND3 3 GND3 3 GND3 3
81 PR10A 3 T RLM0_PLLT_FB_A PR14A 3 T RLM0_PLLT_FB_A PR23A 3 T RLM0_PLLT_FB_A
82 PR9B 3 C RLM0_PLLC_IN_A PR13B 3 C RLM0_PLLC_IN_A PR22B 3 C RLM0_PLLC_IN_A
83 PR9A 3 T RLM0_PLLT_IN_A PR13A 3 T RLM0_PLLT_IN_A PR22A 3 T RLM0_PLLT_IN_A
84 VCCIO3 3 VCCIO3 3 VCCIO3 3
85 PR8B 3 C DI/CSSPIN PR12B 3 C DI/CSSPIN PR21B 3 C DI/CSSPIN
86 PR8A 3 T DOUT/CSON PR12A 3 T DOUT/CSON PR21A 3 T DOUT/CSON
87 PR7B 3 C BUSY/SISPI PR11B 3 C BUSY/SISPI PR20B 3 C BUSY/SISPI
88 PR7A 3 T D7/SPID0 PR11A 3 T D7/SPID0 PR20A 3 T D7/SPID0
89 CFG2 3 CFG2 3 CFG2 3
90 CFG1 3 CFG1 3 CFG1 3
91 CFG0 3 CFG0 3 CFG0 3
92 VCC - VCC - VCC -
93 PROGRAMN 3 PROGRAMN 3 PROGRAMN 3
94 CCLK 3 CCLK 3 CCLK 3
95 INITN 3 INITN 3 INITN 3
96 GND - GND - GND -
97 DONE 3 DONE 3 DONE 3
98 GND - GND - GND -
LFEC1, LFEC3, LFECP/EC6 Logic Signal Connections: 144 TQFP (Cont.)
Pin
Number
LFEC1 LFEC3 LFECP6/EC6
Pin Function Bank
LVD
S Dual Function Pin Function Bank
LVD
S Dual Function Pin Function Bank
LVD
S Dual Function
4-13
Pinout Information
LatticeECP/EC Family Data Sheet
99 VCC - VCC - VCC -
100 PR5B 2 C PCLKC2_0 PR9B 2 C PCLKC2_0 PR9B 2 C PCLKC2_0
101 PR5A 2 T PCLKT2_0 PR9A 2 T PCLKT2_0 PR9A 2 T PCLKT2_0
102 PR4B 2 C PR8B 2 C PR8B 2 C
103 PR4A 2 T PR8A 2 T PR8A 2 T
104 PR3B 2 C PR7B 2 C PR7B 2 C
105 PR3A 2 T PR7A 2 T PR7A 2 T
106 PR2B 2 C VREF1_2 PR2B 2 C VREF1_2 PR2B 2 C VREF1_2
107 PR2A 2 T VREF2_2 PR2A 2 T VREF2_2 PR2A 2 T VREF2_2
108 VCCIO2 2 VCCIO2 2 VCCIO2 2
109* GND1
GND2 - GND1
GND2 - GND1
GND2 -
110 VCCIO1 1 VCCIO1 1 VCCIO1 1
111 PT17B 1 C PT25B 1 C PT25B 1 C
112 PT17A 1 T PT25A 1 T PT25A 1 T
113 PT15A 1 PT23A 1 PT23A 1
114 PT14B 1 C PT22B 1 C PT22B 1 C
115 PT14A 1 T TDQS14 PT22A 1 T TDQS22 PT22A 1 T TDQS22
116 PT13B 1 C PT21B 1 C PT21B 1 C
117 GND1 1 GND1 1 GND1 1
118 PT13A 1 T PT21A 1 T PT21A 1 T
119 PT12B 1 C PT20B 1 C PT20B 1 C
120 PT12A 1 T PT20A 1 T PT20A 1 T
121 PT11B 1 C VREF2_1 PT19B 1 C VREF2_1 PT19B 1 C VREF2_1
122 PT11A 1 T VREF1_1 PT19A 1 T VREF1_1 PT19A 1 T VREF1_1
123 PT10B 1 C PT18B 1 C PT18B 1 C
124 PT10A 1 T PT18A 1 T PT18A 1 T
125 VCCIO1 1 VCCIO1 1 VCCIO1 1
126 VCCAUX - VCCAUX - VCCAUX -
127 PT9B 0 C PCLKC0_0 PT17B 0 C PCLKC0_0 PT17B 0 C PCLKC0_0
128 GND0 0 GND0 0 GND0 0
129 PT9A 0 T PCLKT0_0 PT17A 0 T PCLKT0_0 PT17A 0 T PCLKT0_0
130 PT8B 0 C VREF1_0 PT16B 0 C VREF1_0 PT16B 0 C VREF1_0
131 PT8A 0 T VREF2_0 PT16A 0 T VREF2_0 PT16A 0 T VREF2_0
132 PT7B 0 C PT15B 0 C PT15B 0 C
133 PT7A 0 T PT15A 0 T PT15A 0 T
134 PT6B 0 C PT14B 0 C PT14B 0 C
135 PT6A 0 T TDQS6 PT14A 0 T TDQS14 PT14A 0 T TDQS14
136 VCCIO0 0 VCCIO0 0 VCCIO0 0
137 PT5B 0 C PT13B 0 C PT13B 0 C
138 PT5A 0 T PT13A 0 T PT13A 0 T
139 PT4B 0 C PT12B 0 C PT12B 0 C
140 PT4A 0 T PT12A 0 T PT12A 0 T
141 PT2B 0 C PT10B 0 C PT10B 0 C
142 PT2A 0 T PT10A 0 T PT10A 0 T
143 VCCIO0 0 VCCIO0 0 VCCIO0 0
144* GND0
GND7 - GND0
GND7 - GND0
GND7 -
*Double bonded to the pin.
LFEC1, LFEC3, LFECP/EC6 Logic Signal Connections: 144 TQFP (Cont.)
Pin
Number
LFEC1 LFEC3 LFECP6/EC6
Pin Function Bank
LVD
S Dual Function Pin Function Bank
LVD
S Dual Function Pin Function Bank
LVD
S Dual Function
4-14
Pinout Information
LatticeECP/EC Family Data Sheet
LFEC1, LFEC3 Logic Signal Connections: 208 PQFP
Pin Number
LFEC1 LFEC3
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
1* GND0
GND7 - GND0
GND7 -
2 VCCIO7 7 VCCIO7 7
3 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7
4 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7
5NC- NC-
6NC- NC-
7 NC - PL3B 7
8 NC - PL4A 7 T
9 NC - PL4B 7 C
10 NC - PL5A 7 T
11 NC - PL5B 7 C
12 NC - PL6A 7 T LDQS6
13 NC - VCCIO7 7
14 NC - PL6B 7 C
15 PL3A 7 T PL7A 7 T
16 PL3B 7 C PL7B 7 C
17 PL4A 7 T PL8A 7 T
18 NC - NC -
19 PL4B 7 C PL8B 7 C
20 PL5A 7 T PCLKT7_0 PL9A 7 T PCLKT7_0
21 PL5B 7 C PCLKC7_0 PL9B 7 C PCLKC7_0
22 NC - VCCAUX -
23 XRES 6 XRES 6
24 NC - NC -
25 NC - NC -
26 VCC - VCC -
27 TCK6 TCK6
28 GND - GND -
29 TDI 6 TDI 6
30 TMS 6 TMS 6
31 TDO 6 TDO 6
32 VCCJ 6 VCCJ 6
33 PL7A 6 T LLM0_PLLT_IN_A PL11A 6 T LLM0_PLLT_IN_A
34 PL7B 6 C LLM0_PLLC_IN_A PL11B 6 C LLM0_PLLC_IN_A
35 PL8A 6 T LLM0_PLLT_FB_A PL12A 6 T LLM0_PLLT_FB_A
36 PL8B 6 C LLM0_PLLC_FB_A PL12B 6 C LLM0_PLLC_FB_A
37 VCCIO6 6 VCCIO6 6
38 PL9A 6 T PL13A 6 T
39 PL9B 6 C PL13B 6 C
40 PL10A 6 T PL14A 6 T
41 GND6 6 GND6 6
42 PL10B 6 C PL14B 6 C
4-15
Pinout Information
LatticeECP/EC Family Data Sheet
43 PL11A 6 T LDQS11 PL15A 6 T LDQS15
44 PL11B 6 C PL15B 6 C
45 PL12A 6 T PL16A 6 T
46 PL12B 6 C PL16B 6 C
47 PL13A 6 T PL17A 6 T
48 PL13B 6 C PL17B 6 C
49 PL14A 6 T VREF1_6 PL18A 6 T VREF1_6
50 PL14B 6 C VREF2_6 PL18B 6 C VREF2_6
51 VCCIO6 6 VCCIO6 6
52* GND5
GND6 - GND5
GND6 -
53 VCCIO5 5 VCCIO5 5
54 NC - PB2A 5 T
55 NC - PB2B 5 C
56 NC - PB3A 5 T
57 NC - PB3B 5 C
58 NC - PB4A 5 T
59 NC - PB4B 5 C
60 NC - PB5A 5 T
61 NC - PB5B 5 C
62 NC - PB6A 5 T BDQS6
63 NC - PB6B 5 C
64 NC - VCCIO5 5
65 PB2A 5 T PB10A 5 T
66 PB2B 5 C PB10B 5 C
67 PB3A 5 T PB11A 5 T
68 PB3B 5 C PB11B 5 C
69 PB4A 5 T PB12A 5 T
70 PB4B 5 C PB12B 5 C
71 PB5A 5 T PB13A 5 T
72 NC - GND5 5
73 PB5B 5 C PB13B 5 C
74 VCCIO5 5 VCCIO5 5
75 PB6A 5 T BDQS6 PB14A 5 T BDQS14
76 PB6B 5 C PB14B 5 C
77 PB7A 5 T PB15A 5 T
78 PB7B 5 C PB15B 5 C
79 PB8A 5 T VREF2_5 PB16A 5 T VREF2_5
80 PB8B 5 C VREF1_5 PB16B 5 C VREF1_5
81 PB9A 5 T PCLKT5_0 PB17A 5 T PCLKT5_0
82 GND5 5 GND5 5
83 PB9B 5 C PCLKC5_0 PB17B 5 C PCLKC5_0
84 VCCAUX - VCCAUX -
LFEC1, LFEC3 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFEC1 LFEC3
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-16
Pinout Information
LatticeECP/EC Family Data Sheet
85 VCCIO4 4 VCCIO4 4
86 PB10A 4 T WRITEN PB18A 4 T WRITEN
87 PB10B 4 C CS1N PB18B 4 C CS1N
88 PB11A 4 T VREF1_4 PB19A 4 T VREF1_4
89 PB11B 4 C CSN PB19B 4 C CSN
90 PB12A 4 T VREF2_4 PB20A 4 T VREF2_4
91 PB12B 4 C D0/SPID7 PB20B 4 C D0/SPID7
92 PB13A 4 T D2/SPID5 PB21A 4 T D2/SPID5
93 GND4 4 GND4 4
94 PB13B 4 C D1/SPID6 PB21B 4 C D1/SPID6
95 PB14A 4 T BDQS14 PB22A 4 T BDQS22
96 PB14B 4 C D3/SPID4 PB22B 4 C D3/SPID4
97 PB15A 4 T PB23A 4 T
98 PB15B 4 C D4/SPID3 PB23B 4 C D4/SPID3
99 PB16A 4 T PB24A 4 T
100 PB16B 4 C D5/SPID2 PB24B 4 C D5/SPID2
101 PB17A 4 T PB25A 4 T
102 PB17B 4 C D6/SPID1 PB25B 4 C D6/SPID1
103 NC - NC -
104 VCCIO4 4 VCCIO4 4
105* GND3
GND4 - GND3
GND4 -
106 VCCIO3 3 VCCIO3 3
107 PR14B 3 C VREF2_3 PR18B 3 C VREF2_3
108 PR14A 3 T VREF1_3 PR18A 3 T VREF1_3
109 PR13B 3 C PR17B 3 C
110 PR13A 3 T PR17A 3 T
111 PR12B 3 C PR16B 3 C
112 PR12A 3 T PR16A 3 T
113 PR11B 3 C PR15B 3 C
114 PR11A 3 T RDQS11 PR15A 3 T RDQS15
115 PR10B 3 C RLM0_PLLC_FB_A PR14B 3 C RLM0_PLLC_FB_A
116 GND3 3 GND3 3
117 PR10A 3 T RLM0_PLLT_FB_A PR14A 3 T RLM0_PLLT_FB_A
118 PR9B 3 C RLM0_PLLC_IN_A PR13B 3 C RLM0_PLLC_IN_A
119 PR9A 3 T RLM0_PLLT_IN_A PR13A 3 T RLM0_PLLT_IN_A
120 VCCIO3 3 VCCIO3 3
121 PR8B 3 C DI/CSSPIN PR12B 3 C DI/CSSPIN
122 PR8A 3 T DOUT/CSON PR12A 3 T DOUT/CSON
123 PR7B 3 C BUSY/SISPI PR11B 3 C BUSY/SISPI
124 PR7A 3 T D7/SPID0 PR11A 3 T D7/SPID0
125 CFG2 3 CFG2 3
126 CFG1 3 CFG1 3
LFEC1, LFEC3 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFEC1 LFEC3
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-17
Pinout Information
LatticeECP/EC Family Data Sheet
127 CFG0 3 CFG0 3
128 VCC - VCC -
129 PROGRAMN 3 PROGRAMN 3
130 CCLK 3 CCLK 3
131 INITN 3 INITN 3
132 GND - GND -
133 DONE 3 DONE 3
134 GND - GND -
135 VCC - VCC -
136 NC - VCCAUX -
137 PR5B 2 C PCLKC2_0 PR9B 2 C PCLKC2_0
138 NC - GND2 2
139 PR5A 2 T PCLKT2_0 PR9A 2 T PCLKT2_0
140 PR4B 2 C PR8B 2 C
141 PR4A 2 T PR8A 2 T
142 PR3B 2 C PR7B 2 C
143 PR3A 2 T PR7A 2 T
144 NC - PR6B 2 C
145 NC - VCCIO2 2
146 NC - PR6A 2 T RDQS6
147 NC - PR5B 2 C
148 NC - PR5A 2 T
149 NC - PR4B 2 C
150 NC - PR4A 2 T
151 NC - NC -
152 NC - NC -
153 PR2B 2 C VREF1_2 PR2B 2 C VREF1_2
154 PR2A 2 T VREF2_2 PR2A 2 T VREF2_2
155 VCCIO2 2 VCCIO2 2
156* GND1
GND2 - GND1
GND2 -
157 VCCIO1 1 VCCIO1 1
158 NC - NC -
159 PT17B 1 C PT25B 1 C
160 PT17A 1 T PT25A 1 T
161 PT16B 1 C PT24B 1 C
162 PT16A 1 T PT24A 1 T
163 PT15B 1 C PT23B 1 C
164 PT15A 1 T PT23A 1 T
165 PT14B 1 C PT22B 1 C
166 PT14A 1 T TDQS14 PT22A 1 T TDQS22
167 PT13B 1 C PT21B 1 C
168 GND1 1 GND1 1
LFEC1, LFEC3 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFEC1 LFEC3
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-18
Pinout Information
LatticeECP/EC Family Data Sheet
169 PT13A 1 T PT21A 1 T
170 PT12B 1 C PT20B 1 C
171 PT12A 1 T PT20A 1 T
172 PT11B 1 C VREF2_1 PT19B 1 C VREF2_1
173 PT11A 1 T VREF1_1 PT19A 1 T VREF1_1
174 PT10B 1 C PT18B 1 C
175 PT10A 1 T PT18A 1 T
176 VCCIO1 1 VCCIO1 1
177 VCCAUX - VCCAUX -
178 PT9B 0 C PCLKC0_0 PT17B 0 C PCLKC0_0
179 GND0 0 GND0 0
180 PT9A 0 T PCLKT0_0 PT17A 0 T PCLKT0_0
181 PT8B 0 C VREF1_0 PT16B 0 C VREF1_0
182 PT8A 0 T VREF2_0 PT16A 0 T VREF2_0
183 PT7B 0 C PT15B 0 C
184 PT7A 0 T PT15A 0 T
185 PT6B 0 C PT14B 0 C
186 PT6A 0 T TDQS6 PT14A 0 T TDQS14
187 VCCIO0 0 VCCIO0 0
188 PT5B 0 C PT13B 0 C
189 NC - GND0 0
190 PT5A 0 T PT13A 0 T
191 PT4B 0 C PT12B 0 C
192 PT4A 0 T PT12A 0 T
193 PT3B 0 C PT11B 0 C
194 PT3A 0 T PT11A 0 T
195 PT2B 0 C PT10B 0 C
196 PT2A 0 T PT10A 0 T
197 NC - VCCIO0 0
198 NC - PT6B 0 C
199 NC - PT6A 0 T TDQS6
200 NC - PT5B 0 C
201 NC - PT5A 0 T
202 NC - PT4B 0 C
203 NC - PT4A 0 T
204 NC - PT3B 0 C
205 NC - PT3A 0 T
206 NC - PT2B 0 C
207 NC - PT2A 0 T
208 VCCIO0 0 VCCIO0 0
* Double bonded to the pin.
LFEC1, LFEC3 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFEC1 LFEC3
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-19
Pinout Information
LatticeECP/EC Family Data Sheet
LFECP/EC6, LFECP/EC10 Logic Signal Connections: 208 PQFP
Pin Number
LFECP6/LFEC6 LFECP10/LFEC10
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
1* GND0
GND7 - GND0
GND7 -
2 VCCIO7 7 VCCIO7 7
3 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7
4 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7
5NC- VCC-
6NC- GND-
7 PL3B 7 PL12B 7
8PL4A7T PL13A7T
9PL4B7C PL13B7C
10 PL5A 7 T PL14A 7 T
11 PL5B 7 C PL14B 7 C
12 PL6A 7 T LDQS6 PL15A 7 T LDQS15
13 VCCIO7 7 VCCIO7 7
14 PL6B 7 C PL15B 7 C
15 PL7A 7 T PL16A 7 T
16 PL7B 7 C PL16B 7 C
17 PL8A 7 T PL17A 7 T
18 GND7 7 GND7 7
19 PL8B 7 C PL17B 7 C
20 PL9A 7 T PCLKT7_0 PL18A 7 T PCLKT7_0
21 PL9B 7 C PCLKC7_0 PL18B 7 C PCLKC7_0
22 VCCAUX - VCCAUX -
23 XRES 6 XRES 6
24 VCC- VCC-
25 GND - GND -
26 VCC- VCC-
27 TCK6 TCK6
28 GND - GND -
29 TDI 6 TDI 6
30 TMS 6 TMS 6
31 TDO 6 TDO 6
32 VCCJ 6 VCCJ 6
33 PL20A 6 T LLM0_PLLT_IN_A PL29A 6 T LLM0_PLLT_IN_A
34 PL20B 6 C LLM0_PLLC_IN_A PL29B 6 C LLM0_PLLC_IN_A
35 PL21A 6 T LLM0_PLLT_FB_A PL30A 6 T LLM0_PLLT_FB_A
36 PL21B 6 C LLM0_PLLC_FB_A PL30B 6 C LLM0_PLLC_FB_A
37 VCCIO6 6 VCCIO6 6
38 PL22A 6 T PL31A 6 T
39 PL22B 6 C PL31B 6 C
40 PL23A 6 T PL32A 6 T
41 GND6 6 GND6 6
42 PL23B 6 C PL32B 6 C
4-20
Pinout Information
LatticeECP/EC Family Data Sheet
43 PL24A 6 T LDQS24 PL33A 6 T LDQS33
44 PL24B 6 C PL33B 6 C
45 PL25A 6 T PL34A 6 T
46 PL25B 6 C PL34B 6 C
47 PL26A 6 T PL35A 6 T
48 PL26B 6 C PL35B 6 C
49 PL27A 6 T VREF1_6 PL36A 6 T VREF1_6
50 PL27B 6 C VREF2_6 PL36B 6 C VREF2_6
51 VCCIO6 6 VCCIO6 6
52* GND5
GND6 - GND5
GND6 -
53 VCCIO5 5 VCCIO5 5
54 PB2A 5 T PB2A 5 T
55 PB2B 5 C PB2B 5 C
56 PB3A 5 T PB3A 5 T
57 PB3B 5 C PB3B 5 C
58 PB4A 5 T PB4A 5 T
59 PB4B 5 C PB4B 5 C
60 PB5A 5 T PB5A 5 T
61 PB5B 5 C PB5B 5 C
62 PB6A 5 T BDQS6 PB6A 5 T BDQS6
63 PB6B 5 C PB6B 5 C
64 VCCIO5 5 VCCIO5 5
65 PB10A 5 T PB18A 5 T
66 PB10B 5 C PB18B 5 C
67 PB11A 5 T PB19A 5 T
68 PB11B 5 C PB19B 5 C
69 PB12A 5 T PB20A 5 T
70 PB12B 5 C PB20B 5 C
71 PB13A 5 T PB21A 5 T
72 GND5 5 GND5 5
73 PB13B 5 C PB21B 5 C
74 VCCIO5 5 VCCIO5 5
75 PB14A 5 T BDQS14 PB22A 5 T BDQS22
76 PB14B 5 C PB22B 5 C
77 PB15A 5 T PB23A 5 T
78 PB15B 5 C PB23B 5 C
79 PB16A 5 T VREF2_5 PB24A 5 T VREF2_5
80 PB16B 5 C VREF1_5 PB24B 5 C VREF1_5
81 PB17A 5 T PCLKT5_0 PB25A 5 T PCLKT5_0
82 GND5 5 GND5 5
83 PB17B 5 C PCLKC5_0 PB25B 5 C PCLKC5_0
84 VCCAUX - VCCAUX -
LFECP/EC6, LFECP/EC10 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFECP6/LFEC6 LFECP10/LFEC10
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-21
Pinout Information
LatticeECP/EC Family Data Sheet
85 VCCIO4 4 VCCIO4 4
86 PB18A 4 T WRITEN PB26A 4 T WRITEN
87 PB18B 4 C CS1N PB26B 4 C CS1N
88 PB19A 4 T VREF1_4 PB27A 4 T VREF1_4
89 PB19B 4 C CSN PB27B 4 C CSN
90 PB20A 4 T VREF2_4 PB28A 4 T VREF2_4
91 PB20B 4 C D0/SPID7 PB28B 4 C D0/SPID7
92 PB21A 4 T D2/SPID5 PB29A 4 T D2/SPID5
93 GND4 4 GND4 4
94 PB21B 4 C D1/SPID6 PB29B 4 C D1/SPID6
95 PB22A 4 T BDQS22 PB30A 4 T BDQS30
96 PB22B 4 C D3/SPID4 PB30B 4 C D3/SPID4
97 PB23A 4 T PB31A 4 T
98 PB23B 4 C D4/SPID3 PB31B 4 C D4/SPID3
99 PB24A 4 T PB32A 4 T
100 PB24B 4 C D5/SPID2 PB32B 4 C D5/SPID2
101 PB25A 4 T PB33A 4 T
102 PB25B 4 C D6/SPID1 PB33B 4 C D6/SPID1
103 PB33A 4 PB41A 4
104 VCCIO4 4 VCCIO4 4
105* GND3
GND4 - GND3
GND4 -
106 VCCIO3 3 VCCIO3 3
107 PR27B 3 C VREF2_3 PR36B 3 C VREF2_3
108 PR27A 3 T VREF1_3 PR36A 3 T VREF1_3
109 PR26B 3 C PR35B 3 C
110 PR26A 3 T PR35A 3 T
111 PR25B 3 C PR34B 3 C
112 PR25A 3 T PR34A 3 T
113 PR24B 3 C PR33B 3 C
114 PR24A 3 T RDQS24 PR33A 3 T RDQS33
115 PR23B 3 C RLM0_PLLC_FB_A PR32B 3 C RLM0_PLLC_FB_A
116 GND3 3 GND3 3
117 PR23A 3 T RLM0_PLLT_FB_A PR32A 3 T RLM0_PLLT_FB_A
118 PR22B 3 C RLM0_PLLC_IN_A PR31B 3 C RLM0_PLLC_IN_A
119 PR22A 3 T RLM0_PLLT_IN_A PR31A 3 T RLM0_PLLT_IN_A
120 VCCIO3 3 VCCIO3 3
121 PR21B 3 C DI/CSSPIN PR30B 3 C DI/CSSPIN
122 PR21A 3 T DOUT/CSON PR30A 3 T DOUT/CSON
123 PR20B 3 C BUSY/SISPI PR29B 3 C BUSY/SISPI
124 PR20A 3 T D7/SPID0 PR29A 3 T D7/SPID0
125 CFG2 3 CFG2 3
126 CFG1 3 CFG1 3
LFECP/EC6, LFECP/EC10 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFECP6/LFEC6 LFECP10/LFEC10
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-22
Pinout Information
LatticeECP/EC Family Data Sheet
127 CFG0 3 CFG0 3
128 VCC- VCC-
129 PROGRAMN 3 PROGRAMN 3
130 CCLK 3 CCLK 3
131 INITN 3 INITN 3
132 GND - GND -
133 DONE 3 DONE 3
134 GND - GND -
135 VCC- VCC-
136 VCCAUX - VCCAUX -
137 PR9B 2 C PCLKC2_0 PR18B 2 C PCLKC2_0
138 GND2 2 GND2 2
139 PR9A 2 T PCLKT2_0 PR18A 2 T PCLKT2_0
140 PR8B 2 C PR17B 2 C
141 PR8A 2 T PR17A 2 T
142 PR7B 2 C PR16B 2 C
143 PR7A 2 T PR16A 2 T
144 PR6B 2 C PR15B 2 C
145 VCCIO2 2 VCCIO2 2
146 PR6A 2 T RDQS6 PR15A 2 T RDQS15
147 PR5B 2 C PR14B 2 C
148 PR5A 2 T PR14A 2 T
149 PR4B 2 C PR13B 2 C
150 PR4A 2 T PR13A 2 T
151 NC - GND -
152 NC - VCC -
153 PR2B 2 C VREF1_2 PR2B 2 C VREF1_2
154 PR2A 2 T VREF2_2 PR2A 2 T VREF2_2
155 VCCIO2 2 VCCIO2 2
156* GND1
GND2 - GND1
GND2 -
157 VCCIO1 1 VCCIO1 1
158 PT33A 1 PT41A 1
159 PT25B 1 C PT33B 1 C
160 PT25A 1 T PT33A 1 T
161 PT24B 1 C PT32B 1 C
162 PT24A 1 T PT32A 1 T
163 PT23B 1 C PT31B 1 C
164 PT23A 1 T PT31A 1 T
165 PT22B 1 C PT30B 1 C
166 PT22A 1 T TDQS22 PT30A 1 T TDQS30
167 PT21B 1 C PT29B 1 C
168 GND1 1 GND1 1
LFECP/EC6, LFECP/EC10 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFECP6/LFEC6 LFECP10/LFEC10
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-23
Pinout Information
LatticeECP/EC Family Data Sheet
169 PT21A 1 T PT29A 1 T
170 PT20B 1 C PT28B 1 C
171 PT20A 1 T PT28A 1 T
172 PT19B 1 C VREF2_1 PT27B 1 C VREF2_1
173 PT19A 1 T VREF1_1 PT27A 1 T VREF1_1
174 PT18B 1 C PT26B 1 C
175 PT18A 1 T PT26A 1 T
176 VCCIO1 1 VCCIO1 1
177 VCCAUX - VCCAUX -
178 PT17B 0 C PCLKC0_0 PT25B 0 C PCLKC0_0
179 GND0 0 GND0 0
180 PT17A 0 T PCLKT0_0 PT25A 0 T PCLKT0_0
181 PT16B 0 C VREF1_0 PT24B 0 C VREF1_0
182 PT16A 0 T VREF2_0 PT24A 0 T VREF2_0
183 PT15B 0 C PT23B 0 C
184 PT15A 0 T PT23A 0 T
185 PT14B 0 C PT22B 0 C
186 PT14A 0 T TDQS14 PT22A 0 T TDQS22
187 VCCIO0 0 VCCIO0 0
188 PT13B 0 C PT21B 0 C
189 GND0 0 GND0 0
190 PT13A 0 T PT21A 0 T
191 PT12B 0 C PT20B 0 C
192 PT12A 0 T PT20A 0 T
193 PT11B 0 C PT19B 0 C
194 PT11A 0 T PT19A 0 T
195 PT10B 0 C PT18B 0 C
196 PT10A 0 T PT18A 0 T
197 VCCIO0 0 VCCIO0 0
198 PT6B 0 C PT6B 0 C
199 PT6A 0 T TDQS6 PT6A 0 T TDQS6
200 PT5B 0 C PT5B 0 C
201 PT5A 0 T PT5A 0 T
202 PT4B 0 C PT4B 0 C
203 PT4A 0 T PT4A 0 T
204 PT3B 0 C PT3B 0 C
205 PT3A 0 T PT3A 0 T
206 PT2B 0 C PT2B 0 C
207 PT2A 0 T PT2A 0 T
208 VCCIO0 0 VCCIO0 0
*Double bonded to the pin.
LFECP/EC6, LFECP/EC10 Logic Signal Connections: 208 PQFP (Cont.)
Pin Number
LFECP6/LFEC6 LFECP10/LFEC10
Pin Function Bank LVDS Dual Function Pin Function Bank LVDS Dual Function
4-24
Pinout Information
LatticeECP/EC Family Data Sheet
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
GND GND7 7 GND7 7
D4 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7
D3 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7
C3 PL3A 7 T PL3A 7 T
C2 PL3B 7 C PL3B 7 C
B1 PL4A 7 T PL4A 7 T
C1 PL4B 7 C PL4B 7 C
E3 PL5A 7 T PL5A 7 T
E4 PL5B 7 C PL5B 7 C
F4 PL6A 7 T LDQS6 PL6A 7 T LDQS6
F5 PL6B 7 C PL6B 7 C
G4 PL7A 7 T PL7A 7 T
G3 PL7B 7 C PL7B 7 C
D2 PL8A 7 T PL8A 7 T
D1 PL8B 7 C PL8B 7 C
E1 PL9A 7 T PCLKT7_0 PL9A 7 T PCLKT7_0
GND GND7 7 GND7 7
E2 PL9B 7 C PCLKC7_0 PL9B 7 C PCLKC7_0
F3 XRES 6 XRES 6
G5 NC - PL11A 6 T
H5 NC - PL11B 6 C
F2 NC - PL12A 6 T
F1 NC - PL12B 6 C
H4 NC - PL13A 6 T
H3 NC - PL13B 6 C
G2 NC - PL14A 6 T
- - - GND6 6
G1 NC - PL14B 6 C
J4 NC - PL15A 6 T LDQS15
J3 NC - PL15B 6 C
J5 NC - PL16A 6 T
K5 NC - PL16B 6 C
H2 NC - PL17A 6 T
H1 NC - PL17B 6 C
J2 NC - PL18A 6 T
- - - GND6 6
J1 NC - PL18B 6 C
K4 TCK 6 TCK 6
K3 TDI 6 TDI 6
L3 TMS 6 TMS 6
L5 TDO 6 TDO 6
L4 VCCJ 6 VCCJ 6
4-25
Pinout Information
LatticeECP/EC Family Data Sheet
K2 PL11A 6 T LLM0_PLLT_IN_A PL20A 6 T LLM0_PLLT_IN_A
K1 PL11B 6 C LLM0_PLLC_IN_A PL20B 6 C LLM0_PLLC_IN_A
L2 PL12A 6 T LLM0_PLLT_FB_A PL21A 6 T LLM0_PLLT_FB_A
L1 PL12B 6 C LLM0_PLLC_FB_A PL21B 6 C LLM0_PLLC_FB_A
M2 PL13A 6 T PL22A 6 T
M1 PL13B 6 C PL22B 6 C
N1 PL14A 6 T PL23A 6 T
GND GND6 6 GND6 6
N2 PL14B 6 C PL23B 6 C
M4 PL15A 6 T LDQS15 PL24A 6 T LDQS24
M3 PL15B 6 C PL24B 6 C
P1 PL16A 6 T PL25A 6 T
R1 PL16B 6 C PL25B 6 C
P2 PL17A 6 T PL26A 6 T
P3 PL17B 6 C PL26B 6 C
N3 PL18A 6 T VREF1_6 PL27A 6 T VREF1_6
N4 PL18B 6 C VREF2_6 PL27B 6 C VREF2_6
GND GND6 6 GND6 6
GND GND5 5 GND5 5
P4 PB2A 5 T PB2A 5 T
N5 PB2B 5 C PB2B 5 C
P5 PB3A 5 T PB3A 5 T
P6 PB3B 5 C PB3B 5 C
R4 PB4A 5 T PB4A 5 T
R3 PB4B 5 C PB4B 5 C
T2 PB5A 5 T PB5A 5 T
T3 PB5B 5 C PB5B 5 C
R5 PB6A 5 T BDQS6 PB6A 5 T BDQS6
R6 PB6B 5 C PB6B 5 C
T4 PB7A 5 T PB7A 5 T
T5 PB7B 5 C PB7B 5 C
N6 PB8A 5 T PB8A 5 T
M6 PB8B 5 C PB8B 5 C
T6 PB9A 5 T PB9A 5 T
GND GND5 5 GND5 5
T7 PB9B 5 C PB9B 5 C
P7 PB10A 5 T PB10A 5 T
N7 PB10B 5 C PB10B 5 C
R7 PB11A 5 T PB11A 5 T
R8 PB11B 5 C PB11B 5 C
M7 PB12A 5 T PB12A 5 T
M8 PB12B 5 C PB12B 5 C
T8 PB13A 5 T PB13A 5 T
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-26
Pinout Information
LatticeECP/EC Family Data Sheet
GND GND5 5 GND5 5
T9 PB13B 5 C PB13B 5 C
P8 PB14A 5 T BDQS14 PB14A 5 T BDQS14
N8 PB14B 5 C PB14B 5 C
R9 PB15A 5 T PB15A 5 T
R10 PB15B 5 C PB15B 5 C
P9 PB16A 5 T VREF2_5 PB16A 5 T VREF2_5
N9 PB16B 5 C VREF1_5 PB16B 5 C VREF1_5
T10 PB17A 5 T PCLKT5_0 PB17A 5 T PCLKT5_0
GND GND5 5 GND5 5
T11 PB17B 5 C PCLKC5_0 PB17B 5 C PCLKC5_0
T12 PB18A 4 T WRITEN PB18A 4 T WRITEN
T13 PB18B 4 C CS1N PB18B 4 C CS1N
P10 PB19A 4 T VREF1_4 PB19A 4 T VREF1_4
N10 PB19B 4 C CSN PB19B 4 C CSN
T14 PB20A 4 T VREF2_4 PB20A 4 T VREF2_4
T15 PB20B 4 C D0/SPID7 PB20B 4 C D0/SPID7
M10 PB21A 4 T D2/SPID5 PB21A 4 T D2/SPID5
GND GND4 4 GND4 4
M11 PB21B 4 C D1/SPID6 PB21B 4 C D1/SPID6
R11 PB22A 4 T BDQS22 PB22A 4 T BDQS22
P11 PB22B 4 C D3/SPID4 PB22B 4 C D3/SPID4
R13 PB23A 4 T PB23A 4 T
R14 PB23B 4 C D4/SPID3 PB23B 4 C D4/SPID3
P12 PB24A 4 T PB24A 4 T
P13 PB24B 4 C D5/SPID2 PB24B 4 C D5/SPID2
N11 PB25A 4 T PB25A 4 T
- - - GND4 4
N12 PB25B 4 C D6/SPID1 PB25B 4 C D6/SPID1
R12 NC - PB26A 4
GND GND4 4 GND4 4
- - - GND4 4
GND GND3 3 GND3 3
N13 PR18B 3 C VREF2_3 PR27B 3 C VREF2_3
N14 PR18A 3 T VREF1_3 PR27A 3 T VREF1_3
P14 PR17B 3 C PR26B 3 C
P15 PR17A 3 T PR26A 3 T
R15 PR16B 3 C PR25B 3 C
R16 PR16A 3 T PR25A 3 T
M13 PR15B 3 C PR24B 3 C
M14 PR15A 3 T RDQS15 PR24A 3 T RDQS24
P16 PR14B 3 C RLM0_PLLC_FB_A PR23B 3 C RLM0_PLLC_FB_A
GND GND3 3 GND3 3
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-27
Pinout Information
LatticeECP/EC Family Data Sheet
N16 PR14A 3 T RLM0_PLLT_FB_A PR23A 3 T RLM0_PLLT_FB_A
N15 PR13B 3 C RLM0_PLLC_IN_A PR22B 3 C RLM0_PLLC_IN_A
M15 PR13A 3 T RLM0_PLLT_IN_A PR22A 3 T RLM0_PLLT_IN_A
M16 PR12B 3 C DI/CSSPIN PR21B 3 C DI/CSSPIN
L16 PR12A 3 T DOUT/CSON PR21A 3 T DOUT/CSON
K16 PR11B 3 C BUSY/SISPI PR20B 3 C BUSY/SISPI
J16 PR11A 3 T D7/SPID0 PR20A 3 T D7/SPID0
L12 CFG2 3 CFG2 3
L14 CFG1 3 CFG1 3
L13 CFG0 3 CFG0 3
K13 PROGRAMN 3 PROGRAMN 3
L15 CCLK 3 CCLK 3
K15 INITN 3 INITN 3
K14 DONE 3 DONE 3
- - GND3 3
H16 NC - PR18B 3 C
H15 NC - PR18A 3 T
G16 NC - PR17B 3 C
G15 NC - PR17A 3 T
K12 NC - PR16B 3 C
J12 NC - PR16A 3 T
J14 NC - PR15B 3 C
J15 NC - PR15A 3 T RDQS15
F16 NC - PR14B 3 C
- - - GND3 3
F15 NC - PR14A 3 T
J13 NC - PR13B 3 C
H13 NC - PR13A 3 T
H14 NC - PR12B 3 C
G14 NC - PR12A 3 T
E16 NC - PR11B 3 C
E15 NC - PR11A 3 T
H12 PR9B 2 C PCLKC2_0 PR9B 2 C PCLKC2_0
GND GND2 2 GND2
G12 PR9A 2 T PCLKT2_0 PR9A 2 T PCLKT2_0
G13 PR8B 2 C PR8B 2 C
F13 PR8A 2 T PR8A 2 T
F12 PR7B 2 C PR7B 2 C
E13 PR7A 2 T PR7A 2 T
D16 PR6B 2 C PR6B 2 C
D15 PR6A 2 T RDQS6 PR6A 2 T RDQS6
F14 PR5B 2 C PR5B 2 C
E14 PR5A 2 T PR5A 2 T
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-28
Pinout Information
LatticeECP/EC Family Data Sheet
C16 PR4B 2 C PR4B 2 C
B16 PR4A 2 T PR4A 2 T
C15 PR3B 2 C PR3B 2 C
C14 PR3A 2 T PR3A 2 T
D14 PR2B 2 C VREF1_2 PR2B 2 C VREF1_2
D13 PR2A 2 T VREF2_2 PR2A 2 T VREF2_2
GND GND2 2 GND2 2
GND GND1 1 GND1 1
- - - GND1 1
B13 NC - PT26B 1 C
C13 NC - PT26A 1 T
C12 PT25B 1 C PT25B 1 C
- - - GND1 1
D12 PT25A 1 T PT25A 1 T
A15 PT24B 1 C PT24B 1 C
B14 PT24A 1 T PT24A 1 T
D11 PT23B 1 C PT23B 1 C
C11 PT23A 1 T PT23A 1 T
E10 PT22B 1 C PT22B 1 C
E11 PT22A 1 T TDQS22 PT22A 1 T TDQS22
A14 PT21B 1 C PT21B 1 C
GND GND1 1 GND1 1
A13 PT21A 1 T PT21A 1 T
D10 PT20B 1 C PT20B 1 C
C10 PT20A 1 T PT20A 1 T
A12 PT19B 1 C VREF2_1 PT19B 1 C VREF2_1
B12 PT19A 1 T VREF1_1 PT19A 1 T VREF1_1
A11 PT18B 1 C PT18B 1 C
B11 PT18A 1 T PT18A 1 T
A10 PT17B 0 C PCLKC0_0 PT17B 0 C PCLKC0_0
GND GND0 0 GND0 0
B10 PT17A 0 T PCLKT0_0 PT17A 0 T PCLKT0_0
C9 PT16B 0 C VREF1_0 PT16B 0 C VREF1_0
B9 PT16A 0 T VREF2_0 PT16A 0 T VREF2_0
E9 PT15B 0 C PT15B 0 C
D9 PT15A 0 T PT15A 0 T
D8 PT14B 0 C PT14B 0 C
C8 PT14A 0 T TDQS14 PT14A 0 T TDQS14
A9 PT13B 0 C PT13B 0 C
GND GND0 0 GND0 0
A8 PT13A 0 T PT13A 0 T
B8 PT12B 0 C PT12B 0 C
B7 PT12A 0 T PT12A 0 T
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-29
Pinout Information
LatticeECP/EC Family Data Sheet
D7 PT11B 0 C PT11B 0 C
C7 PT11A 0 T PT11A 0 T
A7 PT10B 0 C PT10B 0 C
A6 PT10A 0 T PT10A 0 T
E7 PT9B 0 C PT9B 0 C
GND GND0 0 GND0 0
E6 PT9A 0 T PT9A 0 T
D6 PT8B 0 C PT8B 0 C
C6 PT8A 0 T PT8A 0 T
B6 PT7B 0 C PT7B 0 C
B5 PT7A 0 T PT7A 0 T
A5 PT6B 0 C PT6B 0 C
A4 PT6A 0 T TDQS6 PT6A 0 T TDQS6
A3 PT5B 0 C PT5B 0 C
A2 PT5A 0 T PT5A 0 T
B2 PT4B 0 C PT4B 0 C
B3 PT4A 0 T PT4A 0 T
D5 PT3B 0 C PT3B 0 C
C5 PT3A 0 T PT3A 0 T
C4 PT2B 0 C PT2B 0 C
B4 PT2A 0 T PT2A 0 T
GND GND0 0 GND0 0
A1 GND - GND -
A16 GND - GND -
G10 GND - GND -
G7 GND - GND -
G8 GND - GND -
G9 GND - GND -
H10 GND - GND -
H7 GND - GND -
H8 GND - GND -
H9 GND - GND -
J10 GND - GND -
J7 GND - GND -
J8 GND - GND -
J9 GND - GND -
K10 GND - GND -
K7 GND - GND -
K8 GND - GND -
K9 GND - GND -
T1 GND - GND -
T16 GND - GND -
E12 VCC - VCC -
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-30
Pinout Information
LatticeECP/EC Family Data Sheet
E5 VCC - VCC -
E8 VCC - VCC -
M12 VCC - VCC -
M5 VCC - VCC -
M9 VCC - VCC -
B15 VCCAUX - VCCAUX -
R2 VCCAUX - VCCAUX -
F7 VCCIO0 0 VCCIO0 0
F8 VCCIO0 0 VCCIO0 0
F10 VCCIO1 1 VCCIO1 1
F9 VCCIO1 1 VCCIO1 1
G11 VCCIO2 2 VCCIO2 2
H11 VCCIO2 2 VCCIO2 2
J11 VCCIO3 3 VCCIO3 3
K11 VCCIO3 3 VCCIO3 3
L10 VCCIO4 4 VCCIO4 4
L9 VCCIO4 4 VCCIO4 4
L7 VCCIO5 5 VCCIO5 5
L8 VCCIO5 5 VCCIO5 5
J6 VCCIO6 6 VCCIO6 6
K6 VCCIO6 6 VCCIO6 6
G6 VCCIO7 7 VCCIO7 7
H6 VCCIO7 7 VCCIO7 7
F6 VCC - VCC -
F11 VCC - VCC -
L11 VCC - VCC -
L6 VCC - VCC -
LFEC3 and LFECP/EC6 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFEC3 LFECP6/LFEC6
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-31
Pinout Information
LatticeECP/EC Family Data Sheet
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
GND GND7 7 GND7 7
D4 PL2A 7 T VREF2_7 PL2A 7 T VREF2_7
D3 PL2B 7 C VREF1_7 PL2B 7 C VREF1_7
GND GND7 7 GND7 7
C3 PL12A 7 T PL16A 7 T
C2 PL12B 7 C PL16B 7 C
B1 PL13A 7 T PL17A 7 T
C1 PL13B 7 C PL17B 7 C
E3 PL14A 7 T PL18A 7 T
GND GND7 7 GND7 7
- - - GND7 7
E4 PL14B 7 C PL18B 7 C
F4 PL15A 7 T LDQS15 PL19A 7 T LDQS19
F5 PL15B 7 C PL19B 7 C
G4 PL16A 7 T PL20A 7 T
G3 PL16B 7 C PL20B 7 C
D2 PL17A 7 T PL21A 7 T
D1 PL17B 7 C PL21B 7 C
E1 PL18A 7 T PCLKT7_0 PL22A 7 T PCLKT7_0
GND GND7 7 GND7 7
E2 PL18B 7 C PCLKC7_0 PL22B 7 C PCLKC7_0
F3 XRES 6 XRES 6
G5 PL20A 6 T PL24A 6 T
H5 PL20B 6 C PL24B 6 C
F2 PL21A 6 T PL25A 6 T
F1 PL21B 6 C PL25B 6 C
H4 PL22A 6 T PL26A 6 T
H3 PL22B 6 C PL26B 6 C
G2 PL23A 6 T PL27A 6 T
GND GND6 6 GND6 6
G1 PL23B 6 C PL27B 6 C
J4 PL24A 6 T LDQS24 PL28A 6 T LDQS28
J3 PL24B 6 C PL28B 6 C
J5 PL25A 6 T PL29A 6 T
K5 PL25B 6 C PL29B 6 C
H2 PL26A 6 T PL30A 6 T
H1 PL26B 6 C PL30B 6 C
J2 PL27A 6 T PL31A 6 T
GND GND6 6 GND6 6
J1 PL27B 6 C PL31B 6 C
K4 TCK 6 TCK 6
K3 TDI 6 TDI 6
4-32
Pinout Information
LatticeECP/EC Family Data Sheet
L3 TMS 6 TMS 6
L5 TDO 6 TDO 6
L4 VCCJ 6 VCCJ 6
K2 PL29A 6 T LLM0_PLLT_IN_A PL37A 6 T LLM0_PLLT_IN_A
K1 PL29B 6 C LLM0_PLLC_IN_A PL37B 6 C LLM0_PLLC_IN_A
L2 PL30A 6 T LLM0_PLLT_FB_A PL38A 6 T LLM0_PLLT_FB_A
L1 PL30B 6 C LLM0_PLLC_FB_A PL38B 6 C LLM0_PLLC_FB_A
M2 PL31A 6 T PL39A 6 T
M1 PL31B 6 C PL39B 6 C
N1 PL32A 6 T PL40A 6 T
GND GND6 6 GND6 6
- - - GND6 6
N2 PL32B 6 C PL40B 6 C
M4 PL33A 6 T LDQS33 PL41A 6 T LDQS41
M3 PL33B 6 C PL41B 6 C
P1 PL34A 6 T PL42A 6 T
R1 PL34B 6 C PL42B 6 C
P2 PL35A 6 T PL43A 6 T
P3 PL35B 6 C PL43B 6 C
N3 PL36A 6 T VREF1_6 PL44A 6 T VREF1_6
N4 PL36B 6 C VREF2_6 PL44B 6 C VREF2_6
GND GND6 6 GND6 6
GND GND5 5 GND5 5
GND GND5 5 GND5 5
P4 PB10A 5 T PB10A 5 T
N5 PB10B 5 C PB10B 5 C
P5 PB11A 5 T PB11A 5 T
P6 PB11B 5 C PB11B 5 C
R4 PB12A 5 T PB12A 5 T
R3 PB12B 5 C PB12B 5 C
T2 PB13A 5 T PB13A 5 T
GND GND5 5 GND5 5
T3 PB13B 5 C PB13B 5 C
R5 PB14A 5 T BDQS14 PB14A 5 T BDQS14
R6 PB14B 5 C PB14B 5 C
T4 PB15A 5 T PB15A 5 T
T5 PB15B 5 C PB15B 5 C
N6 PB16A 5 T PB16A 5 T
M6 PB16B 5 C PB16B 5 C
T6 PB17A 5 T PB17A 5 T
GND GND5 5 GND5 5
T7 PB17B 5 C PB17B 5 C
P7 PB18A 5 T PB18A 5 T
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-33
Pinout Information
LatticeECP/EC Family Data Sheet
N7 PB18B 5 C PB18B 5 C
R7 PB19A 5 T PB19A 5 T
R8 PB19B 5 C PB19B 5 C
M7 PB20A 5 T PB20A 5 T
M8 PB20B 5 C PB20B 5 C
T8 PB21A 5 T PB21A 5 T
GND GND5 5 GND5 5
T9 PB21B 5 C PB21B 5 C
P8 PB22A 5 T BDQS22 PB22A 5 T BDQS22
N8 PB22B 5 C PB22B 5 C
R9 PB23A 5 T PB23A 5 T
R10 PB23B 5 C PB23B 5 C
P9 PB24A 5 T VREF2_5 PB24A 5 T VREF2_5
N9 PB24B 5 C VREF1_5 PB24B 5 C VREF1_5
T10 PB25A 5 T PCLKT5_0 PB25A 5 T PCLKT5_0
GND GND5 5 GND5 5
T11 PB25B 5 C PCLKC5_0 PB25B 5 C PCLKC5_0
T12 PB26A 4 T WRITEN PB26A 4 T WRITEN
T13 PB26B 4 C CS1N PB26B 4 C CS1N
P10 PB27A 4 T VREF1_4 PB27A 4 T VREF1_4
N10 PB27B 4 C CSN PB27B 4 C CSN
T14 PB28A 4 T VREF2_4 PB28A 4 T VREF2_4
T15 PB28B 4 C D0/SPID7 PB28B 4 C D0/SPID7
M10 PB29A 4 T D2/SPID5 PB29A 4 T D2/SPID5
GND GND4 4 GND4 4
M11 PB29B 4 C D1/SPID6 PB29B 4 C D1/SPID6
R11 PB30A 4 T BDQS30 PB30A 4 T BDQS30
P11 PB30B 4 C D3/SPID4 PB30B 4 C D3/SPID4
R13 PB31A 4 T PB31A 4 T
R14 PB31B 4 C D4/SPID3 PB31B 4 C D4/SPID3
P12 PB32A 4 T PB32A 4 T
P13 PB32B 4 C D5/SPID2 PB32B 4 C D5/SPID2
N11 PB33A 4 T PB33A 4 T
GND GND4 4 GND4 4
N12 PB33B 4 C D6/SPID1 PB33B 4 C D6/SPID1
R12 PB34A 4 PB34A 4
GND GND4 4 GND4 4
GND GND4 4 GND4 4
- - - GND4 4
- - - GND4 4
GND GND3 3 GND3 3
N13 PR36B 3 C VREF2_3 PR44B 3 C VREF2_3
N14 PR36A 3 T VREF1_3 PR44A 3 T VREF1_3
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-34
Pinout Information
LatticeECP/EC Family Data Sheet
P14 PR35B 3 C PR43B 3 C
P15 PR35A 3 T PR43A 3 T
R15 PR34B 3 C PR42B 3 C
R16 PR34A 3 T PR42A 3 T
M13 PR33B 3 C PR41B 3 C
M14 PR33A 3 T RDQS33 PR41A 3 T RDQS41
P16 PR32B 3 C RLM0_PLLC_FB_A PR40B 3 C RLM0_PLLC_FB_A
GND GND3 3 GND3 3
N16 PR32A 3 T RLM0_PLLT_FB_A PR40A 3 T RLM0_PLLT_FB_A
N15 PR31B 3 C RLM0_PLLC_IN_A PR39B 3 C RLM0_PLLC_IN_A
M15 PR31A 3 T RLM0_PLLT_IN_A PR39A 3 T RLM0_PLLT_IN_A
M16 PR30B 3 C DI/CSSPIN PR38B 3 C DI/CSSPIN
L16 PR30A 3 T DOUT/CSON PR38A 3 T DOUT/CSON
K16 PR29B 3 C BUSY/SISPI PR37B 3 C BUSY/SISPI
J16 PR29A 3 T D7/SPID0 PR37A 3 T D7/SPID0
L12 CFG2 3 CFG2 3
L14 CFG1 3 CFG1 3
L13 CFG0 3 CFG0 3
K13 PROGRAMN 3 PROGRAMN 3
L15 CCLK 3 CCLK 3
K15 INITN 3 INITN 3
K14 DONE 3 DONE 3
GND GND3 3 GND3 3
H16 PR27B 3 C PR31B 3 C
- - - GND3 3
H15 PR27A 3 T PR31A 3 T
G16 PR26B 3 C PR30B 3 C
G15 PR26A 3 T PR30A 3 T
K12 PR25B 3 C PR29B 3 C
J12 PR25A 3 T PR29A 3 T
J14 PR24B 3 C PR28B 3 C
J15 PR24A 3 T RDQS24 PR28A 3 T RDQS28
F16 PR23B 3 C PR27B 3 C
GND GND3 3 GND3 3
F15 PR23A 3 T PR27A 3 T
J13 PR22B 3 C PR26B 3 C
H13 PR22A 3 T PR26A 3 T
H14 PR21B 3 C PR25B 3 C
G14 PR21A 3 T PR25A 3 T
E16 PR20B 3 C PR24B 3 C
E15 PR20A 3 T PR24A 3 T
H12 PR18B 2 C PCLKC2_0 PR22B 2 C PCLKC2_0
GND GND2 2 GND2 2
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-35
Pinout Information
LatticeECP/EC Family Data Sheet
G12 PR18A 2 T PCLKT2_0 PR22A 2 T PCLKT2_0
G13 PR17B 2 C PR21B 2 C
F13 PR17A 2 T PR21A 2 T
F12 PR16B 2 C PR20B 2 C
E13 PR16A 2 T PR20A 2 T
D16 PR15B 2 C PR19B 2 C
D15 PR15A 2 T PR19A 2 T RDQS19
F14 PR14B 2 C PR18B 2 C
GND GND2 2 GND2 2
E14 PR14A 2 T PR18A 2 T
C16 PR13B 2 C PR17B 2 C
B16 PR13A 2 T PR17A 2 T
C15 PR12B 2 C PR16B 2 C
C14 PR12A 2 T PR16A 2 T
GND GND2 2 GND2 2
- - - GND2 2
D14 PR2B 2 C VREF1_2 PR2B 2 C VREF1_2
D13 PR2A 2 T VREF2_2 PR2A 2 T VREF2_2
GND GND2 2 GND2 2
GND GND1 1 GND1 1
GND GND1 1 GND1 1
- - - GND1 1
- - - GND1 1
B13 PT34B 1 C PT34B 1 C
C13 PT34A 1 T PT34A 1 T
C12 PT33B 1 C PT33B 1 C
GND GND1 1 GND1 1
D12 PT33A 1 T PT33A 1 T
A15 PT32B 1 C PT32B 1 C
B14 PT32A 1 T PT32A 1 T
D11 PT31B 1 C PT31B 1 C
C11 PT31A 1 T PT31A 1 T
E10 PT30B 1 C PT30B 1 C
E11 PT30A 1 T TDQS30 PT30A 1 T TDQS30
A14 PT29B 1 C PT29B 1 C
GND GND1 1 GND1 1
A13 PT29A 1 T PT29A 1 T
D10 PT28B 1 C PT28B 1 C
C10 PT28A 1 T PT28A 1 T
A12 PT27B 1 C VREF2_1 PT27B 1 C VREF2_1
B12 PT27A 1 T VREF1_1 PT27A 1 T VREF1_1
A11 PT26B 1 C PT26B 1 C
B11 PT26A 1 T PT26A 1 T
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-36
Pinout Information
LatticeECP/EC Family Data Sheet
A10 PT25B 0 C PCLKC0_0 PT25B 0 C PCLKC0_0
GND GND0 0 GND0 0
B10 PT25A 0 T PCLKT0_0 PT25A 0 T PCLKT0_0
C9 PT24B 0 C VREF1_0 PT24B 0 C VREF1_0
B9 PT24A 0 T VREF2_0 PT24A 0 T VREF2_0
E9 PT23B 0 C PT23B 0 C
D9 PT23A 0 T PT23A 0 T
D8 PT22B 0 C PT22B 0 C
C8 PT22A 0 T TDQS22 PT22A 0 T TDQS22
A9 PT21B 0 C PT21B 0 C
GND GND0 0 GND0 0
A8 PT21A 0 T PT21A 0 T
B8 PT20B 0 C PT20B 0 C
B7 PT20A 0 T PT20A 0 T
D7 PT19B 0 C PT19B 0 C
C7 PT19A 0 T PT19A 0 T
A7 PT18B 0 C PT18B 0 C
A6 PT18A 0 T PT18A 0 T
E7 PT17B 0 C PT17B 0 C
GND GND0 0 GND0 0
E6 PT17A 0 T PT17A 0 T
D6 PT16B 0 C PT16B 0 C
C6 PT16A 0 T PT16A 0 T
B6 PT15B 0 C PT15B 0 C
B5 PT15A 0 T PT15A 0 T
A5 PT14B 0 C PT14B 0 C
A4 PT14A 0 T TDQS14 PT14A 0 T TDQS14
A3 PT13B 0 C PT13B 0 C
- GND0 0 GND0 0
A2 PT13A 0 T PT13A 0 T
B2 PT12B 0 C PT12B 0 C
B3 PT12A 0 T PT12A 0 T
D5 PT11B 0 C PT11B 0 C
C5 PT11A 0 T PT11A 0 T
C4 PT10B 0 C PT10B 0 C
B4 PT10A 0 T PT10A 0 T
GND GND0 0 GND0 0
GND GND0 0 GND0 0
A1 GND - GND -
A16 GND - GND -
G10 GND - GND -
G7 GND - GND -
G8 GND - GND -
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-37
Pinout Information
LatticeECP/EC Family Data Sheet
G9 GND - GND -
H10 GND - GND -
H7 GND - GND -
H8 GND - GND -
H9 GND - GND -
J10 GND - GND -
J7 GND - GND -
J8 GND - GND -
J9 GND - GND -
K10 GND - GND -
K7 GND - GND -
K8 GND - GND -
K9 GND - GND -
T1 GND - GND -
T16 GND - GND -
E12 VCC - VCC -
E5 VCC - VCC -
E8 VCC - VCC -
M12 VCC - VCC -
M5 VCC - VCC -
M9 VCC - VCC -
B15 VCCAUX - VCCAUX -
R2 VCCAUX - VCCAUX -
F7 VCCIO0 0 VCCIO0 0
F8 VCCIO0 0 VCCIO0 0
F10 VCCIO1 1 VCCIO1 1
F9 VCCIO1 1 VCCIO1 1
G11 VCCIO2 2 VCCIO2 2
H11 VCCIO2 2 VCCIO2 2
J11 VCCIO3 3 VCCIO3 3
K11 VCCIO3 3 VCCIO3 3
L10 VCCIO4 4 VCCIO4 4
L9 VCCIO4 4 VCCIO4 4
L7 VCCIO5 5 VCCIO5 5
L8 VCCIO5 5 VCCIO5 5
J6 VCCIO6 6 VCCIO6 6
K6 VCCIO6 6 VCCIO6 6
G6 VCCIO7 7 VCCIO7 7
H6 VCCIO7 7 VCCIO7 7
F6 VCC - VCC -
F11 VCC - VCC -
L11 VCC - VCC -
L6 VCC - VCC -
LFECP/EC10 and LFECP/EC15 Logic Signal Connections: 256 fpBGA (Cont.)
Ball
Number
LFECP10/LFEC10 LFECP15/LFEC15
Ball Function Bank LVDS Dual Function Ball Function Bank LVDS Dual Function
4-38
Pinout Information
LatticeECP/EC Family Data Sheet
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
GND GND7 7 GND GND7 7 GND GND7 7
D4 PL2A 7 T VREF2_7 D4 PL2A 7 T VREF2_7 D4 PL2A 7 T VREF2_7
E4 PL2B 7 C VREF1_7 E4 PL2B 7 C VREF1_7 E4 PL2B 7 C VREF1_7
C3 NC - C3 PL3A 7 T C3 PL3A 7 T
B2 NC - B2 PL3B 7 C B2 PL3B 7 C
E5 NC - E5 PL4A 7 T E5 PL4A 7 T
F5 NC - F5 PL4B 7 C F5 PL4B 7 C
D3 NC - D3 PL5A 7 T D3 PL5A 7 T
C2 NC - C2 PL5B 7 C C2 PL5B 7 C
F4 NC - F4 PL6A 7 T LDQS6 F4 PL6A 7 T LDQS6
G4 NC - G4 PL6B 7 C G4 PL6B 7 C
E3 NC - E3 PL7A 7 T E3 PL7A 7 T
D2 NC - D2 PL7B 7 C D2 PL7B 7 C
B1 NC - B1 PL8A 7 T LUM0_PLLT_IN_A B1 PL8A 7 T LUM0_PLLT_IN_A
C1 NC - C1 PL8B 7 C LUM0_PLLC_IN_A C1 PL8B 7 C LUM0_PLLC_IN_A
F3 NC - F3 PL9A 7 T LUM0_PLLT_FB_A F3 PL9A 7 T LUM0_PLLT_FB_A
GND - - GND GND7 7 GND GND7 7
E2 NC - E2 PL9B 7 C LUM0_PLLC_FB_A E2 PL9B 7 C LUM0_PLLC_FB_A
G5 NC - G5 NC - G5 PL11A 7 T
H6 NC - H6 NC - H6 PL11B 7 C
G3 NC - G3 NC - G3 PL12A 7 T
H4 NC - H4 NC - H4 PL12B 7 C
J5 NC - J5 NC - J5 PL13A 7 T
H5 NC - H5 NC - H5 PL13B 7 C
F2 NC - F2 NC - F2 PL14A 7 T
GND - - GND - - GND GND7 7
F1 NC - F1 NC - F1 PL14B 7 C
E1 NC - E1 PL11A 7 T E1 PL15A 7 T
D1 NC - D1 PL11B 7 C D1 PL15B 7 C
H3 PL3A 7 T H3 PL12A 7 T H3 PL16A 7 T
G2 PL3B 7 C G2 PL12B 7 C G2 PL16B 7 C
H2 PL4A 7 T H2 PL13A 7 T H2 PL17A 7 T
G1 PL4B 7 C G1 PL13B 7 C G1 PL17B 7 C
J4 PL5A 7 T J4 PL14A 7 T J4 PL18A 7 T
GND - - GND GND7 7 GND GND7 7
J3 PL5B 7 C J3 PL14B 7 C J3 PL18B 7 C
J2 PL6A 7 T LDQS6 J2 PL15A 7 T LDQS15 J2 PL19A 7 T LDQS19
H1 PL6B 7 C H1 PL15B 7 C H1 PL19B 7 C
K4 PL7A 7 T K4 PL16A 7 T K4 PL20A 7 T
K5 PL7B 7 C K5 PL16B 7 C K5 PL20B 7 C
K3 PL8A 7 T K3 PL17A 7 T K3 PL21A 7 T
K2 PL8B 7 C K2 PL17B 7 C K2 PL21B 7 C
J1 PL9A 7 T PCLKT7_0 J1 PL18A 7 T PCLKT7_0 J1 PL22A 7 T PCLKT7_0
GND GND7 7 GND GND7 7 GND GND7 7
K1 PL9B 7 C PCLKC7_0 K1 PL18B 7 C PCLKC7_0 K1 PL22B 7 C PCLKC7_0
L3 XRES 6 L3 XRES 6 L3 XRES 6
L4 PL11A 6 T L4 PL20A 6 T L4 PL24A 6 T
L5 PL11B 6 C L5 PL20B 6 C L5 PL24B 6 C
L2 PL12A 6 T L2 PL21A 6 T L2 PL25A 6 T
L1 PL12B 6 C L1 PL21B 6 C L1 PL25B 6 C
4-39
Pinout Information
LatticeECP/EC Family Data Sheet
M4 PL13A 6 T M4 PL22A 6 T M4 PL26A 6 T
M5 PL13B 6 C M5 PL22B 6 C M5 PL26B 6 C
M1 PL14A 6 T M1 PL23A 6 T M1 PL27A 6 T
GND GND6 6 GND GND6 6 GND GND6 6
M2 PL14B 6 C M2 PL23B 6 C M2 PL27B 6 C
N3 PL15A 6 T LDQS15 N3 PL24A 6 T LDQS24 N3 PL28A 6 T LDQS28
M3 PL15B 6 C M3 PL24B 6 C M3 PL28B 6 C
N5 PL16A 6 T N5 PL25A 6 T N5 PL29A 6 T
N4 PL16B 6 C N4 PL25B 6 C N4 PL29B 6 C
N1 PL17A 6 T N1 PL26A 6 T N1 PL30A 6 T
N2 PL17B 6 C N2 PL26B 6 C N2 PL30B 6 C
P1 PL18A 6 T P1 PL27A 6 T P1 PL31A 6 T
GND GND6 6 GND GND6 6 GND GND6 6
P2 PL18B 6 C P2 PL27B 6 C P2 PL31B 6 C
R6 NC - R6 NC - R6 PL32A 6 T
P5 NC - P5 NC - P5 PL32B 6 C
P3 NC - P3 NC - P3 PL33A 6 T
P4 NC - P4 NC - P4 PL33B 6 C
R1 NC - R1 NC - R1 PL34A 6 T
R2 NC - R2 NC - R2 PL34B 6 C
R5 NC - R5 NC - R5 PL35A 6 T
GND - - - - - GND GND6 6
R4 NC - R4 NC - R4 PL35B 6 C
T1 NC - T1 NC - T1 NC -
T2 NC - T2 NC - T2 NC -
R3 NC - R3 NC - R3 NC -
T3 NC - T3 NC - T3 NC -
T5 TCK 6 T5 TCK 6 T5 TCK 6
U5 TDI 6 U5 TDI 6 U5 TDI 6
T4 TMS 6 T4 TMS 6 T4 TMS 6
U1 TDO 6 U1 TDO 6 U1 TDO 6
U2 VCCJ 6 U2 VCCJ 6 U2 VCCJ 6
V1 PL20A 6 T LLM0_PLLT_IN_A V1 PL29A 6 T LLM0_PLLT_IN_A V1 PL37A 6 T LLM0_PLLT_IN_A
V2 PL20B 6 C LLM0_PLLC_IN_A V2 PL29B 6 C LLM0_PLLC_IN_A V2 PL37B 6 C LLM0_PLLC_IN_A
U3 PL21A 6 T LLM0_PLLT_FB_A U3 PL30A 6 T LLM0_PLLT_FB_A U3 PL38A 6 T LLM0_PLLT_FB_A
V3 PL21B 6 C LLM0_PLLC_FB_A V3 PL30B 6 C LLM0_PLLC_FB_A V3 PL38B 6 C LLM0_PLLC_FB_A
U4 PL22A 6 T U4 PL31A 6 T U4 PL39A 6 T
V5 PL22B 6 C V5 PL31B 6 C V5 PL39B 6 C
W1 PL23A 6 T W1 PL32A 6 T W1 PL40A 6 T
GND GND6 6 GND GND6 6 GND GND6 6
W2 PL23B 6 C W2 PL32B 6 C W2 PL40B 6 C
Y1 PL24A 6 T LDQS24 Y1 PL33A 6 T LDQS33 Y1 PL41A 6 T LDQS41
Y2 PL24B 6 C Y2 PL33B 6 C Y2 PL41B 6 C
AA1 PL25A 6 T AA1 PL34A 6 T AA1 PL42A 6 T
AA2 PL25B 6 C AA2 PL34B 6 C AA2 PL42B 6 C
W4 PL26A 6 T W4 PL35A 6 T W4 PL43A 6 T
V4 PL26B 6 C V4 PL35B 6 C V4 PL43B 6 C
W3 PL27A 6 T VREF1_6 W3 PL36A 6 T VREF1_6 W3 PL44A 6 T VREF1_6
Y3 PL27B 6 C VREF2_6 Y3 PL36B 6 C VREF2_6 Y3 PL44B 6 C VREF2_6
GND GND6 6 GND GND6 6 GND GND6 6
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-40
Pinout Information
LatticeECP/EC Family Data Sheet
GND GND5 5 GND GND5 5 GND GND5 5
V7 NC - V7 PB2A 5 T V7 PB2A 5 T
T6 NC - T6 PB2B 5 C T6 PB2B 5 C
V8 NC - V8 PB3A 5 T V8 PB3A 5 T
U7 NC - U7 PB3B 5 C U7 PB3B 5 C
W5 NC - W5 PB4A 5 T W5 PB4A 5 T
U6 NC - U6 PB4B 5 C U6 PB4B 5 C
AA3 NC - AA3 PB5A 5 T AA3 PB5A 5 T
AB3 NC - AB3 PB5B 5 C AB3 PB5B 5 C
Y6 NC - Y6 PB6A 5 T BDQS6 Y6 PB6A 5 T BDQS6
V6 NC - V6 PB6B 5 C V6 PB6B 5 C
AA5 NC - AA5 PB7A 5 T AA5 PB7A 5 T
W6 NC - W6 PB7B 5 C W6 PB7B 5 C
Y5 NC - Y5 PB8A 5 T Y5 PB8A 5 T
Y4 NC - Y4 PB8B 5 C Y4 PB8B 5 C
AA4 NC - AA4 PB9A 5 T AA4 PB9A 5 T
GND - - GND GND5 5 GND GND5 5
AB4 NC - AB4 PB9B 5 C AB4 PB9B 5 C
Y7 PB2A 5 T Y7 PB10A 5 T Y7 PB10A 5 T
W8 PB2B 5 C W8 PB10B 5 C W8 PB10B 5 C
W7 PB3A 5 T W7 PB11A 5 T W7 PB11A 5 T
U8 PB3B 5 C U8 PB11B 5 C U8 PB11B 5 C
W9 PB4A 5 T W9 PB12A 5 T W9 PB12A 5 T
U9 PB4B 5 C U9 PB12B 5 C U9 PB12B 5 C
Y8 PB5A 5 T Y8 PB13A 5 T Y8 PB13A 5 T
GND - - GND GND5 5 GND GND5 5
Y9 PB5B 5 C Y9 PB13B 5 C Y9 PB13B 5 C
V9 PB6A 5 T BDQS6 V9 PB14A 5 T BDQS14 V9 PB14A 5 T BDQS14
T9 PB6B 5 C T9 PB14B 5 C T9 PB14B 5 C
W10 PB7A 5 T W10 PB15A 5 T W10 PB15A 5 T
U10 PB7B 5 C U10 PB15B 5 C U10 PB15B 5 C
V10 PB8A 5 T V10 PB16A 5 T V10 PB16A 5 T
T10 PB8B 5 C T10 PB16B 5 C T10 PB16B 5 C
AA6 PB9A 5 T AA6 PB17A 5 T AA6 PB17A 5 T
GND GND5 5 GND GND5 5 GND GND5 5
AB5 PB9B 5 C AB5 PB17B 5 C AB5 PB17B 5 C
AA8 PB10A 5 T AA8 PB18A 5 T AA8 PB18A 5 T
AA7 PB10B 5 C AA7 PB18B 5 C AA7 PB18B 5 C
AB6 PB11A 5 T AB6 PB19A 5 T AB6 PB19A 5 T
AB7 PB11B 5 C AB7 PB19B 5 C AB7 PB19B 5 C
Y10 PB12A 5 T Y10 PB20A 5 T Y10 PB20A 5 T
W11 PB12B 5 C W11 PB20B 5 C W11 PB20B 5 C
AB8 PB13A 5 T AB8 PB21A 5 T AB8 PB21A 5 T
GND GND5 5 GND GND5 5 GND GND5 5
AB9 PB13B 5 C AB9 PB21B 5 C AB9 PB21B 5 C
AA10 PB14A 5 T BDQS14 AA10 PB22A 5 T BDQS22 AA10 PB22A 5 T BDQS22
AA9 PB14B 5 C AA9 PB22B 5 C AA9 PB22B 5 C
Y11 PB15A 5 T Y11 PB23A 5 T Y11 PB23A 5 T
AA11 PB15B 5 C AA11 PB23B 5 C AA11 PB23B 5 C
V11 PB16A 5 T VREF2_5 V11 PB24A 5 T VREF2_5 V11 PB24A 5 T VREF2_5
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-41
Pinout Information
LatticeECP/EC Family Data Sheet
V12 PB16B 5 C VREF1_5 V12 PB24B 5 C VREF1_5 V12 PB24B 5 C VREF1_5
AB10 PB17A 5 T PCLKT5_0 AB10 PB25A 5 T PCLKT5_0 AB10 PB25A 5 T PCLKT5_0
GND GND5 5 GND GND5 5 GND GND5 5
AB11 PB17B 5 C PCLKC5_0 AB11 PB25B 5 C PCLKC5_0 AB11 PB25B 5 C PCLKC5_0
Y12 PB18A 4 T WRITEN Y12 PB26A 4 T WRITEN Y12 PB26A 4 T WRITEN
U11 PB18B 4 C CS1N U11 PB26B 4 C CS1N U11 PB26B 4 C CS1N
W12 PB19A 4 T VREF1_4 W12 PB27A 4 T VREF1_4 W12 PB27A 4 T VREF1_4
U12 PB19B 4 C CSN U12 PB27B 4 C CSN U12 PB27B 4 C CSN
W13 PB20A 4 T VREF2_4 W13 PB28A 4 T VREF2_4 W13 PB28A 4 T VREF2_4
U13 PB20B 4 C D0/SPID7 U13 PB28B 4 C D0/SPID7 U13 PB28B 4 C D0/SPID7
AA12 PB21A 4 T D2/SPID5 AA12 PB29A 4 T D2/SPID5 AA12 PB29A 4 T D2/SPID5
GND GND4 4 GND GND4 4 GND GND4 4
AB12 PB21B 4 C D1/SPID6 AB12 PB29B 4 C D1/SPID6 AB12 PB29B 4 C D1/SPID6
T13 PB22A 4 T BDQS22 T13 PB30A 4 T BDQS30 T13 PB30A 4 T BDQS30
V13 PB22B 4 C D3/SPID4 V13 PB30B 4 C D3/SPID4 V13 PB30B 4 C D3/SPID4
W14 PB23A 4 T W14 PB31A 4 T W14 PB31A 4 T
U14 PB23B 4 C D4/SPID3 U14 PB31B 4 C D4/SPID3 U14 PB31B 4 C D4/SPID3
Y13 PB24A 4 T Y13 PB32A 4 T Y13 PB32A 4 T
V14 PB24B 4 C D5/SPID2 V14 PB32B 4 C D5/SPID2 V14 PB32B 4 C D5/SPID2
AA13 PB25A 4 T AA13 PB33A 4 T AA13 PB33A 4 T
GND GND4 4 GND GND4 4 GND GND4 4
AB13 PB25B 4 C D6/SPID1 AB13 PB33B 4 C D6/SPID1 AB13 PB33B 4 C D6/SPID1
AA14 PB26A 4 T AA14 PB34A 4 T AA14 PB34A 4 T
Y14 PB26B 4 C Y14 PB34B 4 C Y14 PB34B 4 C
Y15 PB27A 4 T Y15 PB35A 4 T Y15 PB35A 4 T
W15 PB27B 4 C W15 PB35B 4 C W15 PB35B 4 C
V15 PB28A 4 T V15 PB36A 4 T V15 PB36A 4 T
T14 PB28B 4 C T14 PB36B 4 C T14 PB36B 4 C
AB14 PB29A 4 T AB14 PB37A 4 T AB14 PB37A 4 T
GND GND4 4 GND GND4 4 GND GND4 4
AB15 PB29B 4 C AB15 PB37B 4 C AB15 PB37B 4 C
AB16 PB30A 4 T BDQS30 AB16 PB38A 4 T BDQS38 AB16 PB38A 4 T BDQS38
AA15 PB30B 4 C AA15 PB38B 4 C AA15 PB38B 4 C
AB17 PB31A 4 T AB17 PB39A 4 T AB17 PB39A 4 T
AA16 PB31B 4 C AA16 PB39B 4 C AA16 PB39B 4 C
AB18 PB32A 4 T AB18 PB40A 4 T AB18 PB40A 4 T
AA17 PB32B 4 C AA17 PB40B 4 C AA17 PB40B 4 C
AB19 PB33A 4 T AB19 PB41A 4 T AB19 PB41A 4 T
GND - - GND - - GND GND4 4
AA18 PB33B 4 C AA18 PB41B 4 C AA18 PB41B 4 C
W16 NC - W16 NC - W16 PB42A 4 T
U15 NC - U15 NC - U15 PB42B 4 C
V16 NC - V16 NC - V16 PB43A 4 T
U16 NC - U16 NC - U16 PB43B 4 C
Y17 NC - Y17 NC - Y17 PB44A 4 T
V17 NC - V17 NC - V17 PB44B 4 C
AB20 NC - AB20 NC - AB20 PB45A 4 T
GND - - GND - - GND GND4 4
AA19 NC - AA19 NC - AA19 PB45B 4 C
Y16 NC - Y16 NC - Y16 PB46A 4 T BDQS46
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-42
Pinout Information
LatticeECP/EC Family Data Sheet
W17 NC - W17 NC - W17 PB46B 4 C
AA20 NC - AA20 NC - AA20 PB47A 4 T
Y19 NC - Y19 NC - Y19 PB47B 4 C
Y18 NC - Y18 NC - Y18 PB48A 4 T
W18 NC - W18 NC - W18 PB48B 4 C
T17 NC - T17 NC - T17 PB49A 4 T
U17 NC - U17 NC - U17 PB49B 4 C
GND GND4 4 GND GND4 4 GND GND4 4
GND GND3 3 GND GND3 3 GND GND3 3
W20 PR27B 3 C VREF2_3 W20 PR36B 3 C VREF2_3 W20 PR44B 3 C VREF2_3
Y20 PR27A 3 T VREF1_3 Y20 PR36A 3 T VREF1_3 Y20 PR44A 3 T VREF1_3
AA21 PR26B 3 C AA21 PR35B 3 C AA21 PR43B 3 C
AB21 PR26A 3 T AB21 PR35A 3 T AB21 PR43A 3 T
W19 PR25B 3 C W19 PR34B 3 C W19 PR42B 3 C
V19 PR25A 3 T V19 PR34A 3 T V19 PR42A 3 T
Y21 PR24B 3 C Y21 PR33B 3 C Y21 PR41B 3 C
AA22 PR24A 3 T RDQS24 AA22 PR33A 3 T RDQS33 AA22 PR41A 3 T RDQS41
V20 PR23B 3 C RLM0_PLLC_FB_A V20 PR32B 3 C RLM0_PLLC_FB_A V20 PR40B 3 C RLM0_PLLC_FB_A
GND GND3 3 GND GND3 3 GND GND3 3
U20 PR23A 3 T RLM0_PLLT_FB_A U20 PR32A 3 T RLM0_PLLT_FB_A U20 PR40A 3 T RLM0_PLLT_FB_A
W21 PR22B 3 C RLM0_PLLC_IN_A W21 PR31B 3 C RLM0_PLLC_IN_A W21 PR39B 3 C RLM0_PLLC_IN_A
Y22 PR22A 3 T RLM0_PLLT_IN_A Y22 PR31A 3 T RLM0_PLLT_IN_A Y22 PR39A 3 T RLM0_PLLT_IN_A
V21 PR21B 3 C DI/CSSPIN V21 PR30B 3 C DI/CSSPIN V21 PR38B 3 C DI/CSSPIN
W22 PR21A 3 T DOUT/CSON W22 PR30A 3 T DOUT/CSON W22 PR38A 3 T DOUT/CSON
U21 PR20B 3 C BUSY/SISPI U21 PR29B 3 C BUSY/SISPI U21 PR37B 3 C BUSY/SISPI
V22 PR20A 3 T D7/SPID0 V22 PR29A 3 T D7/SPID0 V22 PR37A 3 T D7/SPID0
T19 CFG2 3 T19 CFG2 3 T19 CFG2 3
U19 CFG1 3 U19 CFG1 3 U19 CFG1 3
U18 CFG0 3 U18 CFG0 3 U18 CFG0 3
V18 PROGRAMN 3 V18 PROGRAMN 3 V18 PROGRAMN 3
T20 CCLK 3 T20 CCLK 3 T20 CCLK 3
T21 INITN 3 T21 INITN 3 T21 INITN 3
R20 DONE 3 R20 DONE 3 R20 DONE 3
T18 NC - T18 NC - T18 NC -
R17 NC - R17 NC - R17 NC -
R19 NC - R19 NC - R19 NC -
R18 NC - R18 NC - R18 NC -
U22 NC - U22 NC - U22 PR35B 3 C
GND - - GND - - GND GND3 3
T22 NC - T22 NC - T22 PR35A 3 T
R21 NC - R21 NC - R21 PR34B 3 C
R22 NC - R22 NC - R22 PR34A 3 T
P20 NC - P20 NC - P20 PR33B 3 C
N20 NC - N20 NC - N20 PR33A 3 T
P19 NC - P19 NC - P19 PR32B 3 C
P18 NC - P18 NC - P18 PR32A 3 T
P21 PR18B 3 C P21 PR27B 3 C P21 PR31B 3 C
GND GND3 3 GND GND3 3 GND GND3 3
P22 PR18A 3 T P22 PR27A 3 T P22 PR31A 3 T
N21 PR17B 3 C N21 PR26B 3 C N21 PR30B 3 C
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-43
Pinout Information
LatticeECP/EC Family Data Sheet
N22 PR17A 3 T N22 PR26A 3 T N22 PR30A 3 T
N19 PR16B 3 C N19 PR25B 3 C N19 PR29B 3 C
N18 PR16A 3 T N18 PR25A 3 T N18 PR29A 3 T
M21 PR15B 3 C M21 PR24B 3 C M21 PR28B 3 C
L20 PR15A 3 T RDQS15 L20 PR24A 3 T RDQS24 L20 PR28A 3 T RDQS28
L21 PR14B 3 C L21 PR23B 3 C L21 PR27B 3 C
GND GND3 3 GND GND3 3 GND GND3 3
M20 PR14A 3 T M20 PR23A 3 T M20 PR27A 3 T
M18 PR13B 3 C M18 PR22B 3 C M18 PR26B 3 C
M19 PR13A 3 T M19 PR22A 3 T M19 PR26A 3 T
M22 PR12B 3 C M22 PR21B 3 C M22 PR25B 3 C
L22 PR12A 3 T L22 PR21A 3 T L22 PR25A 3 T
K22 PR11B 3 C K22 PR20B 3 C K22 PR24B 3 C
K21 PR11A 3 T K21 PR20A 3 T K21 PR24A 3 T
J22 PR9B 2 C PCLKC2_0 J22 PR18B 2 C PCLKC2_0 J22 PR22B 2 C PCLKC2_0
GND GND2 2 GND GND2 2 GND GND2 2
J21 PR9A 2 T PCLKT2_0 J21 PR18A 2 T PCLKT2_0 J21 PR22A 2 T PCLKT2_0
H22 PR8B 2 C H22 PR17B 2 C H22 PR21B 2 C
H21 PR8A 2 T H21 PR17A 2 T H21 PR21A 2 T
L19 PR7B 2 C L19 PR16B 2 C L19 PR20B 2 C
L18 PR7A 2 T L18 PR16A 2 T L18 PR20A 2 T
K20 PR6B 2 C K20 PR15B 2 C K20 PR19B 2 C
J20 PR6A 2 T RDQS6 J20 PR15A 2 T RDQS15 J20 PR19A 2 T RDQS19
K19 PR5B 2 C K19 PR14B 2 C K19 PR18B 2 C
GND - - GND GND2 2 GND GND2 2
K18 PR5A 2 T K18 PR14A 2 T K18 PR18A 2 T
G22 PR4B 2 C G22 PR13B 2 C G22 PR17B 2 C
F22 PR4A 2 T F22 PR13A 2 T F22 PR17A 2 T
F21 PR3B 2 C F21 PR12B 2 C F21 PR16B 2 C
E22 PR3A 2 T E22 PR12A 2 T E22 PR16A 2 T
E21 NC - E21 PR11B 2 C E21 PR15B 2 C
D22 NC - D22 PR11A 2 T D22 PR15A 2 T
G21 NC - G21 NC - G21 PR14B 2 C
G20 NC - G20 NC - GND GND2 2
GND - - - - - G20 PR14A2T
J18 NC - J18 NC - J18 PR13B 2 C
H19 NC - H19 NC - H19 PR13A 2 T
J19 NC - J19 NC - J19 PR12B 2 C
H20 NC - H20 NC - H20 PR12A 2 T
H17 NC - H17 NC - H17 PR11B 2 C
H18 NC - H18 NC - H18 PR11A 2 T
D21 NC - D21 PR9B 2 C RUM0_PLLC_FB_A D21 PR9B 2 C RUM0_PLLC_FB_A
GND - - GND GND2 2 GND GND2 2
C22 NC - C22 PR9A 2 T RUM0_PLLT_FB_A C22 PR9A 2 T RUM0_PLLT_FB_A
G19 NC - G19 PR8B 2 C RUM0_PLLC_IN_A G19 PR8B 2 C RUM0_PLLC_IN_A
G18 NC - G18 PR8A 2 T RUM0_PLLT_IN_A G18 PR8A 2 T RUM0_PLLT_IN_A
F20 NC - F20 PR7B 2 C F20 PR7B 2 C
F19 NC - F19 PR7A 2 T F19 PR7A 2 T
E20 NC - E20 PR6B 2 C E20 PR6B 2 C
D20 NC - D20 PR6A 2 T RDQS6 D20 PR6A 2 T RDQS6
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-44
Pinout Information
LatticeECP/EC Family Data Sheet
C21 NC - C21 PR5B 2 C C21 PR5B 2 C
C20 NC - C20 PR5A 2 T C20 PR5A 2 T
F18 NC - F18 PR4B 2 C F18 PR4B 2 C
E18 NC - E18 PR4A 2 T E18 PR4A 2 T
B22 NC - B22 PR3B 2 C B22 PR3B 2 C
B21 NC - B21 PR3A 2 T B21 PR3A 2 T
E19 PR2B 2 C VREF1_2 E19 PR2B 2 C VREF1_2 E19 PR2B 2 C VREF1_2
D19 PR2A 2 T VREF2_2 D19 PR2A 2 T VREF2_2 D19 PR2A 2 T VREF2_2
GND GND2 2 GND GND2 2 GND GND2 2
GND GND1 1 GND GND1 1 GND GND1 1
G17 NC - G17 NC - G17 PT49B 1 C
F17 NC - F17 NC - F17 PT49A 1 T
D18 NC - D18 NC - D18 PT48B 1 C
C18 NC - C18 NC - C18 PT48A 1 T
C19 NC - C19 NC - C19 PT47B 1 C
B20 NC - B20 NC - B20 PT47A 1 T
D17 NC - D17 NC - D17 PT46B 1 C
C16 NC - C16 NC - C16 PT46A 1 T TDQS46
B19 NC - B19 NC - B19 PT45B 1 C
GND - - GND - - GND GND1 1
A20 NC - A20 NC - A20 PT45A 1 T
E17 NC - E17 NC - E17 PT44B 1 C
C17 NC - C17 NC - C17 PT44A 1 T
F16 NC - F16 NC - F16 PT43B 1 C
E16 NC - E16 NC - E16 PT43A 1 T
F15 NC - F15 NC - F15 PT42B 1 C
D16 NC - D16 NC - D16 PT42A 1 T
B18 PT33B 1 C B18 PT41B 1 C B18 PT41B 1 C
GND - - GND - - GND GND1 1
A19 PT33A 1 T A19 PT41A 1 T A19 PT41A 1 T
B17 PT32B 1 C B17 PT40B 1 C B17 PT40B 1 C
A18 PT32A 1 T A18 PT40A 1 T A18 PT40A 1 T
B16 PT31B 1 C B16 PT39B 1 C B16 PT39B 1 C
A17 PT31A 1 T A17 PT39A 1 T A17 PT39A 1 T
B15 PT30B 1 C B15 PT38B 1 C B15 PT38B 1 C
A16 PT30A 1 T TDQS30 A16 PT38A 1 T TDQS38 A16 PT38A 1 T TDQS38
A15 PT29B 1 C A15 PT37B 1 C A15 PT37B 1 C
GND GND1 1 GND GND1 1 GND GND1 1
A14 PT29A 1 T A14 PT37A 1 T A14 PT37A 1 T
G14 PT28B 1 C G14 PT36B 1 C G14 PT36B 1 C
E15 PT28A 1 T E15 PT36A 1 T E15 PT36A 1 T
D15 PT27B 1 C D15 PT35B 1 C D15 PT35B 1 C
C15 PT27A 1 T C15 PT35A 1 T C15 PT35A 1 T
C14 PT26B 1 C C14 PT34B 1 C C14 PT34B 1 C
B14 PT26A 1 T B14 PT34A 1 T B14 PT34A 1 T
A13 PT25B 1 C A13 PT33B 1 C A13 PT33B 1 C
GND GND1 1 GND GND1 1 GND GND1 1
B13 PT25A 1 T B13 PT33A 1 T B13 PT33A 1 T
E14 PT24B 1 C E14 PT32B 1 C E14 PT32B 1 C
C13 PT24A 1 T C13 PT32A 1 T C13 PT32A 1 T
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-45
Pinout Information
LatticeECP/EC Family Data Sheet
F14 PT23B 1 C F14 PT31B 1 C F14 PT31B 1 C
D14 PT23A 1 T D14 PT31A 1 T D14 PT31A 1 T
E13 PT22B 1 C E13 PT30B 1 C E13 PT30B 1 C
G13 PT22A 1 T TDQS22 G13 PT30A 1 T TDQS30 G13 PT30A 1 T TDQS30
A12 PT21B 1 C A12 PT29B 1 C A12 PT29B 1 C
GND GND1 1 GND GND1 1 GND GND1 1
B12 PT21A 1 T B12 PT29A 1 T B12 PT29A 1 T
F13 PT20B 1 C F13 PT28B 1 C F13 PT28B 1 C
D13 PT20A 1 T D13 PT28A 1 T D13 PT28A 1 T
F12 PT19B 1 C VREF2_1 F12 PT27B 1 C VREF2_1 F12 PT27B 1 C VREF2_1
D12 PT19A 1 T VREF1_1 D12 PT27A 1 T VREF1_1 D12 PT27A 1 T VREF1_1
F11 PT18B 1 C F11 PT26B 1 C F11 PT26B 1 C
C12 PT18A 1 T C12 PT26A 1 T C12 PT26A 1 T
A11 PT17B 0 C PCLKC0_0 A11 PT25B 0 C PCLKC0_0 A11 PT25B 0 C PCLKC0_0
GND GND0 0 GND GND0 0 GND GND0 0
A10 PT17A 0 T PCLKT0_0 A10 PT25A 0 T PCLKT0_0 A10 PT25A 0 T PCLKT0_0
E12 PT16B 0 C VREF1_0 E12 PT24B 0 C VREF1_0 E12 PT24B 0 C VREF1_0
E11 PT16A 0 T VREF2_0 E11 PT24A 0 T VREF2_0 E11 PT24A 0 T VREF2_0
B11 PT15B 0 C B11 PT23B 0 C B11 PT23B 0 C
C11 PT15A 0 T C11 PT23A 0 T C11 PT23A 0 T
B9 PT14B 0 C B9 PT22B 0 C B9 PT22B 0 C
B10 PT14A 0 T TDQS14 B10 PT22A 0 T TDQS22 B10 PT22A 0 T TDQS22
A9 PT13B 0 C A9 PT21B 0 C A9 PT21B 0 C
GND GND0 0 GND GND0 0 GND GND0 0
A8 PT13A 0 T A8 PT21A 0 T A8 PT21A 0 T
D11 PT12B 0 C D11 PT20B 0 C D11 PT20B 0 C
C10 PT12A 0 T C10 PT20A 0 T C10 PT20A 0 T
A7 PT11B 0 C A7 PT19B 0 C A7 PT19B 0 C
A6 PT11A 0 T A6 PT19A 0 T A6 PT19A 0 T
B7 PT10B 0 C B7 PT18B 0 C B7 PT18B 0 C
B8 PT10A 0 T B8 PT18A 0 T B8 PT18A 0 T
A5 PT9B 0 C A5 PT17B 0 C A5 PT17B 0 C
GND GND0 0 GND GND0 0 GND GND0 0
B6 PT9A 0 T B6 PT17A 0 T B6 PT17A 0 T
G10 PT8B 0 C G10 PT16B 0 C G10 PT16B 0 C
E10 PT8A 0 T E10 PT16A 0 T E10 PT16A 0 T
F10 PT7B 0 C F10 PT15B 0 C F10 PT15B 0 C
D10 PT7A 0 T D10 PT15A 0 T D10 PT15A 0 T
G9 PT6B 0 C G9 PT14B 0 C G9 PT14B 0 C
E9 PT6A 0 T TDQS6 E9 PT14A 0 T TDQS14 E9 PT14A 0 T TDQS14
C9 PT5B 0 C C9 PT13B 0 C C9 PT13B 0 C
GND - - GND GND0 0 GND GND0 0
C8 PT5A 0 T C8 PT13A 0 T C8 PT13A 0 T
F9 PT4B 0 C F9 PT12B 0 C F9 PT12B 0 C
D9 PT4A 0 T D9 PT12A 0 T D9 PT12A 0 T
F8 PT3B 0 C F8 PT11B 0 C F8 PT11B 0 C
D7 PT3A 0 T D7 PT11A 0 T D7 PT11A 0 T
D8 PT2B 0 C D8 PT10B 0 C D8 PT10B 0 C
C7 PT2A 0 T C7 PT10A 0 T C7 PT10A 0 T
GND GND0 0 GND GND0 0 GND GND0 0
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-46
Pinout Information
LatticeECP/EC Family Data Sheet
A4 NC - A4 PT9B 0 C A4 PT9B 0 C
B4 NC - B4 PT9A 0 T B4 PT9A 0 T
C4 NC - C4 PT8B 0 C C4 PT8B 0 C
C5 NC - C5 PT8A 0 T C5 PT8A 0 T
D6 NC - D6 PT7B 0 C D6 PT7B 0 C
B5 NC - B5 PT7A 0 T B5 PT7A 0 T
E6 NC - E6 PT6B 0 C E6 PT6B 0 C
C6 NC - C6 PT6A 0 T TDQS6 C6 PT6A 0 T TDQS6
A3 NC - A3 PT5B 0 C A3 PT5B 0 C
B3 NC - B3 PT5A 0 T B3 PT5A 0 T
F6 NC - F6 PT4B 0 C F6 PT4B 0 C
D5 NC - D5 PT4A 0 T D5 PT4A 0 T
F7 NC - F7 PT3B 0 C F7 PT3B 0 C
E8 NC - E8 PT3A 0 T E8 PT3A 0 T
G6 NC - G6 PT2B 0 C G6 PT2B 0 C
E7 NC - E7 PT2A 0 T E7 PT2A 0 T
GND - - GND GND0 0 GND GND0 0
A1 GND - A1 GND - A1 GND -
A22 GND - A22 GND - A22 GND -
AB1 GND - AB1 GND - AB1 GND -
AB22 GND - AB22 GND - AB22 GND -
H15 GND - H15 GND - H15 GND -
H8 GND - H8 GND - H8 GND -
J10 GND - J10 GND - J10 GND -
J11 GND - J11 GND - J11 GND -
J12 GND - J12 GND - J12 GND -
J13 GND - J13 GND - J13 GND -
J14 GND - J14 GND - J14 GND -
J9 GND - J9 GND - J9 GND -
K10 GND - K10 GND - K10 GND -
K11 GND - K11 GND - K11 GND -
K12 GND - K12 GND - K12 GND -
K13 GND - K13 GND - K13 GND -
K14 GND - K14 GND - K14 GND -
K9 GND - K9 GND - K9 GND -
L10 GND - L10 GND - L10 GND -
L11 GND - L11 GND - L11 GND -
L12 GND - L12 GND - L12 GND -
L13 GND - L13 GND - L13 GND -
L14 GND - L14 GND - L14 GND -
L9 GND - L9 GND - L9 GND -
M10 GND - M10 GND - M10 GND -
M11 GND - M11 GND - M11 GND -
M12 GND - M12 GND - M12 GND -
M13 GND - M13 GND - M13 GND -
M14 GND - M14 GND - M14 GND -
M9 GND - M9 GND - M9 GND -
N10 GND - N10 GND - N10 GND -
N11 GND - N11 GND - N11 GND -
N12 GND - N12 GND - N12 GND -
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-47
Pinout Information
LatticeECP/EC Family Data Sheet
N13 GND - N13 GND - N13 GND -
N14 GND - N14 GND - N14 GND -
N9 GND - N9 GND - N9 GND -
P10 GND - P10 GND - P10 GND -
P11 GND - P11 GND - P11 GND -
P12 GND - P12 GND - P12 GND -
P13 GND - P13 GND - P13 GND -
P14 GND - P14 GND - P14 GND -
P9 GND - P9 GND - P9 GND -
R15 GND - R15 GND - R15 GND -
R8 GND - R8 GND - R8 GND -
J16 VCC - J16 VCC - J16 VCC -
J7 VCC - J7 VCC - J7 VCC -
K16 VCC - K16 VCC - K16 VCC -
K17 VCC - K17 VCC - K17 VCC -
K6 VCC - K6 VCC - K6 VCC -
K7 VCC - K7 VCC - K7 VCC -
L17 VCC - L17 VCC - L17 VCC -
L6 VCC - L6 VCC - L6 VCC -
M17 VCC - M17 VCC - M17 VCC -
M6 VCC - M6 VCC - M6 VCC -
N16 VCC - N16 VCC - N16 VCC -
N17 VCC - N17 VCC - N17 VCC -
N6 VCC - N6 VCC - N6 VCC -
N7 VCC - N7 VCC - N7 VCC -
P16 VCC - P16 VCC - P16 VCC -
P7 VCC - P7 VCC - P7 VCC -
G11 VCCIO0 0 G11 VCCIO0 0 G11 VCCIO0 0
H10 VCCIO0 0 H10 VCCIO0 0 H10 VCCIO0 0
H11 VCCIO0 0 H11 VCCIO0 0 H11 VCCIO0 0
H9 VCCIO0 0 H9 VCCIO0 0 H9 VCCIO0 0
G12 VCCIO1 1 G12 VCCIO1 1 G12 VCCIO1 1
H12 VCCIO1 1 H12 VCCIO1 1 H12 VCCIO1 1
H13 VCCIO1 1 H13 VCCIO1 1 H13 VCCIO1 1
H14 VCCIO1 1 H14 VCCIO1 1 H14 VCCIO1 1
J15 VCCIO2 2 J15 VCCIO2 2 J15 VCCIO2 2
K15 VCCIO2 2 K15 VCCIO2 2 K15 VCCIO2 2
L15 VCCIO2 2 L15 VCCIO2 2 L15 VCCIO2 2
L16 VCCIO2 2 L16 VCCIO2 2 L16 VCCIO2 2
M15 VCCIO3 3 M15 VCCIO3 3 M15 VCCIO3 3
M16 VCCIO3 3 M16 VCCIO3 3 M16 VCCIO3 3
N15 VCCIO3 3 N15 VCCIO3 3 N15 VCCIO3 3
P15 VCCIO3 3 P15 VCCIO3 3 P15 VCCIO3 3
R12 VCCIO4 4 R12 VCCIO4 4 R12 VCCIO4 4
R13 VCCIO4 4 R13 VCCIO4 4 R13 VCCIO4 4
R14 VCCIO4 4 R14 VCCIO4 4 R14 VCCIO4 4
T12 VCCIO4 4 T12 VCCIO4 4 T12 VCCIO4 4
R10 VCCIO5 5 R10 VCCIO5 5 R10 VCCIO5 5
R11 VCCIO5 5 R11 VCCIO5 5 R11 VCCIO5 5
R9 VCCIO5 5 R9 VCCIO5 5 R9 VCCIO5 5
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-48
Pinout Information
LatticeECP/EC Family Data Sheet
T11 VCCIO5 5 T11 VCCIO5 5 T11 VCCIO5 5
M7 VCCIO6 6 M7 VCCIO6 6 M7 VCCIO6 6
M8 VCCIO6 6 M8 VCCIO6 6 M8 VCCIO6 6
N8 VCCIO6 6 N8 VCCIO6 6 N8 VCCIO6 6
P8 VCCIO6 6 P8 VCCIO6 6 P8 VCCIO6 6
J8 VCCIO7 7 J8 VCCIO7 7 J8 VCCIO7 7
K8 VCCIO7 7 K8 VCCIO7 7 K8 VCCIO7 7
L7 VCCIO7 7 L7 VCCIO7 7 L7 VCCIO7 7
L8 VCCIO7 7 L8 VCCIO7 7 L8 VCCIO7 7
G15 VCCAUX - G15 VCCAUX - G15 VCCAUX -
G16 VCCAUX - G16 VCCAUX - G16 VCCAUX -
G7 VCCAUX - G7 VCCAUX - G7 VCCAUX -
G8 VCCAUX - G8 VCCAUX - G8 VCCAUX -
H16 VCCAUX - H16 VCCAUX - H16 VCCAUX -
H7 VCCAUX - H7 VCCAUX - H7 VCCAUX -
R16 VCCAUX - R16 VCCAUX - R16 VCCAUX -
R7 VCCAUX - R7 VCCAUX - R7 VCCAUX -
T15 VCCAUX - T15 VCCAUX - T15 VCCAUX -
T16 VCCAUX - T16 VCCAUX - T16 VCCAUX -
T7 VCCAUX - T7 VCCAUX - T7 VCCAUX -
T8 VCCAUX - T8 VCCAUX - T8 VCCAUX -
J6 VCC - J6 VCC - J6 VCC -
J17 VCC - J17 VCC - J17 VCC -
P6 VCC - P6 VCC - P6 VCC -
P17 VCC - P17 VCC - P17 VCC -
A2 NC - A2 NC - A2 NC -
AB2 NC - AB2 NC - AB2 NC -
A21 NC - A21 NC - A21 NC -
LFECP/EC6, LFECP/EC10, LFECP/EC15 Logic Signal Connections:
484 fpBGA (Cont.)
LFECP6/LFEC6 LFECP10/LFEC10 LFECP/LFEC15
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-49
Pinout Information
LatticeECP/EC Family Data Sheet
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
GND GND7 7 GND GND7 7
D4 PL2A 7 T VREF2_7 D4 PL2A 7 T VREF2_7
E4 PL2B 7 C VREF1_7 E4 PL2B 7 C VREF1_7
GND - - GND GND7 7
C3 PL3A 7 T C3 PL10A 7 T
B2 PL3B 7 C B2 PL10B 7 C
E5 PL4A 7 T E5 PL11A 7 T
F5 PL4B 7 C F5 PL11B 7 C
D3 PL5A 7 T D3 PL12A 7 T
C2 PL5B 7 C C2 PL12B 7 C
GND - - GND GND7 7
F4 PL6A 7 T LDQS6 F4 PL14A 7 T LDQS14
G4 PL6B 7 C G4 PL14B 7 C
E3 PL7A 7 T E3 PL15A 7 T
D2 PL7B 7 C D2 PL15B 7 C
B1 PL8A 7 T LUM0_PLLT_IN_A B1 PL16A 7 T LUM0_PLLT_IN_A
C1 PL8B 7 C LUM0_PLLC_IN_A C1 PL16B 7 C LUM0_PLLC_IN_A
F3 PL9A 7 T LUM0_PLLT_FB_A F3 PL17A 7 T LUM0_PLLT_FB_A
GND GND7 7 GND GND7 7
E2 PL9B 7 C LUM0_PLLC_FB_A E2 PL17B 7 C LUM0_PLLC_FB_A
GND - - GND GND7 7
G5 PL11A 7 T G5 PL23A 7 T LDQS23
H6 PL11B 7 C H6 PL23B 7 C
G3 PL12A 7 T G3 PL24A 7 T
H4 PL12B 7 C H4 PL24B 7 C
J5 PL13A 7 T J5 PL25A 7 T
H5 PL13B 7 C H5 PL25B 7 C
F2 PL14A 7 T F2 PL26A 7 T
GND GND7 7 GND GND7 7
F1 PL14B 7 C F1 PL26B 7 C
E1 PL15A 7 T E1 PL27A 7 T
D1 PL15B 7 C D1 PL27B 7 C
H3 PL16A 7 T H3 PL28A 7 T
G2 PL16B 7 C G2 PL28B 7 C
H2 PL17A 7 T H2 PL29A 7 T
G1 PL17B 7 C G1 PL29B 7 C
J4 PL18A 7 T J4 PL30A 7 T
GND GND7 7 GND GND7 7
J3 PL18B 7 C J3 PL30B 7 C
J2 PL19A 7 T LDQS19 J2 PL31A 7 T LDQS31
H1 PL19B 7 C H1 PL31B 7 C
K4 PL20A 7 T K4 PL32A 7 T
K5 PL20B 7 C K5 PL32B 7 C
4-50
Pinout Information
LatticeECP/EC Family Data Sheet
K3 PL21A 7 T K3 PL33A 7 T
K2 PL21B 7 C K2 PL33B 7 C
J1 PL22A 7 T PCLKT7_0 J1 PL34A 7 T PCLKT7_0
GND GND7 7 GND GND7 7
K1 PL22B 7 C PCLKC7_0 K1 PL34B 7 C PCLKC7_0
L3 XRES 6 L3 XRES 6
L4 PL24A 6 T L4 PL36A 6 T
L5 PL24B 6 C L5 PL36B 6 C
L2 PL25A 6 T L2 PL37A 6 T
L1 PL25B 6 C L1 PL37B 6 C
M4 PL26A 6 T M4 PL38A 6 T
M5 PL26B 6 C M5 PL38B 6 C
M1 PL27A 6 T M1 PL39A 6 T
GND GND6 6 GND GND6 6
M2 PL27B 6 C M2 PL39B 6 C
N3 PL28A 6 T LDQS28 N3 PL40A 6 T LDQS40
M3 PL28B 6 C M3 PL40B 6 C
N5 PL29A 6 T N5 PL41A 6 T
N4 PL29B 6 C N4 PL41B 6 C
N1 PL30A 6 T N1 PL42A 6 T
N2 PL30B 6 C N2 PL42B 6 C
P1 PL31A 6 T P1 PL43A 6 T
GND GND6 6 GND GND6 6
P2 PL31B 6 C P2 PL43B 6 C
R6 PL32A 6 T R6 PL44A 6 T
P5 PL32B 6 C P5 PL44B 6 C
P3 PL33A 6 T P3 PL45A 6 T
P4 PL33B 6 C P4 PL45B 6 C
R1 PL34A 6 T R1 PL46A 6 T
R2 PL34B 6 C R2 PL46B 6 C
R5 PL35A 6 T R5 PL47A 6 T
GND GND6 6 GND GND6 6
R4 PL35B 6 C R4 PL47B 6 C
T1 PL36A 6 T LDQS36 T1 PL48A 6 T LDQS48
T2 PL36B 6 C T2 PL48B 6 C
R3 PL37A 6 T R3 PL49A 6 T
T3 PL37B 6 C T3 PL49B 6 C
GND GND6 6 GND GND6 6
T5 TCK 6 T5 TCK 6
U5 TDI 6 U5 TDI 6
T4 TMS 6 T4 TMS 6
U1 TDO 6 U1 TDO 6
U2 VCCJ 6 U2 VCCJ 6
V1 PL41A 6 T LLM0_PLLT_IN_A V1 PL53A 6 T LLM0_PLLT_IN_A
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-51
Pinout Information
LatticeECP/EC Family Data Sheet
V2 PL41B 6 C LLM0_PLLC_IN_A V2 PL53B 6 C LLM0_PLLC_IN_A
U3 PL42A 6 T LLM0_PLLT_FB_A U3 PL54A 6 T LLM0_PLLT_FB_A
V3 PL42B 6 C LLM0_PLLC_FB_A V3 PL54B 6 C LLM0_PLLC_FB_A
U4 PL43A 6 T U4 PL55A 6 T
V5 PL43B 6 C V5 PL55B 6 C
W1 PL44A 6 T W1 PL56A 6 T
GND GND6 6 GND GND6 6
W2 PL44B 6 C W2 PL56B 6 C
Y1 PL45A 6 T LDQS45 Y1 PL57A 6 T LDQS57
Y2 PL45B 6 C Y2 PL57B 6 C
AA1 PL46A 6 T AA1 PL58A 6 T
AA2 PL46B 6 C AA2 PL58B 6 C
W4 PL47A 6 T W4 PL59A 6 T
V4 PL47B 6 C V4 PL59B 6 C
W3 PL48A 6 T VREF1_6 W3 PL68A 6 T VREF1_6
Y3 PL48B 6 C VREF2_6 Y3 PL68B 6 C VREF2_6
GND GND6 6 GND GND6 6
GND GND5 5 GND GND6 6
GND - GND GND6 6
GND - GND GND5 5
GND GND5 5 GND GND5 5
V7 PB10A 5 T V7 PB10A 5 T
T6 PB10B 5 C T6 PB10B 5 C
V8 PB11A 5 T V8 PB11A 5 T
U7 PB11B 5 C U7 PB11B 5 C
W5 PB12A 5 T W5 PB12A 5 T
U6 PB12B 5 C U6 PB12B 5 C
AA3 PB13A 5 T AA3 PB13A 5 T
GND GND5 5 GND GND5 5
AB3 PB13B 5 C AB3 PB13B 5 C
Y6 PB14A 5 T BDQS14 Y6 PB14A 5 T BDQS14
V6 PB14B 5 C V6 PB14B 5 C
AA5 PB15A 5 T AA5 PB15A 5 T
W6 PB15B 5 C W6 PB15B 5 C
Y5 PB16A 5 T Y5 PB16A 5 T
Y4 PB16B 5 C Y4 PB16B 5 C
AA4 PB17A 5 T AA4 PB17A 5 T
GND GND5 5 GND GND5 5
AB4 PB17B 5 C AB4 PB17B 5 C
Y7 PB18A 5 T Y7 PB18A 5 T
W8 PB18B 5 C W8 PB18B 5 C
W7 PB19A 5 T W7 PB19A 5 T
U8 PB19B 5 C U8 PB19B 5 C
W9 PB20A 5 T W9 PB20A 5 T
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-52
Pinout Information
LatticeECP/EC Family Data Sheet
U9 PB20B 5 C U9 PB20B 5 C
Y8 PB21A 5 T Y8 PB21A 5 T
GND GND5 5 GND GND5 5
Y9 PB21B 5 C Y9 PB21B 5 C
V9 PB22A 5 T BDQS22 V9 PB22A 5 T BDQS22
T9 PB22B 5 C T9 PB22B 5 C
W10 PB23A 5 T W10 PB23A 5 T
U10 PB23B 5 C U10 PB23B 5 C
V10 PB24A 5 T V10 PB24A 5 T
T10 PB24B 5 C T10 PB24B 5 C
AA6 PB25A 5 T AA6 PB25A 5 T
GND GND5 5 GND GND5 5
AB5 PB25B 5 C AB5 PB25B 5 C
AA8 PB26A 5 T AA8 PB26A 5 T
AA7 PB26B 5 C AA7 PB26B 5 C
AB6 PB27A 5 T AB6 PB27A 5 T
AB7 PB27B 5 C AB7 PB27B 5 C
Y10 PB28A 5 T Y10 PB28A 5 T
W11 PB28B 5 C W11 PB28B 5 C
AB8 PB29A 5 T AB8 PB29A 5 T
GND GND5 5 GND GND5 5
AB9 PB29B 5 C AB9 PB29B 5 C
AA10 PB30A 5 T BDQS30 AA10 PB30A 5 T BDQS30
AA9 PB30B 5 C AA9 PB30B 5 C
Y11 PB31A 5 T Y11 PB31A 5 T
AA11 PB31B 5 C AA11 PB31B 5 C
V11 PB32A 5 T VREF2_5 V11 PB32A 5 T VREF2_5
V12 PB32B 5 C VREF1_5 V12 PB32B 5 C VREF1_5
AB10 PB33A 5 T PCLKT5_0 AB10 PB33A 5 T PCLKT5_0
GND GND5 5 GND GND5 5
AB11 PB33B 5 C PCLKC5_0 AB11 PB33B 5 C PCLKC5_0
Y12 PB34A 4 T WRITEN Y12 PB34A 4 T WRITEN
U11 PB34B 4 C CS1N U11 PB34B 4 C CS1N
W12 PB35A 4 T VREF1_4 W12 PB35A 4 T VREF1_4
U12 PB35B 4 C CSN U12 PB35B 4 C CSN
W13 PB36A 4 T VREF2_4 W13 PB36A 4 T VREF2_4
U13 PB36B 4 C D0/SPID7 U13 PB36B 4 C D0/SPID7
AA12 PB37A 4 T D2/SPID5 AA12 PB37A 4 T D2/SPID5
GND GND4 4 GND GND4 4
AB12 PB37B 4 C D1/SPID6 AB12 PB37B 4 C D1/SPID6
T13 PB38A 4 T BDQS38 T13 PB38A 4 T BDQS38
V13 PB38B 4 C D3/SPID4 V13 PB38B 4 C D3/SPID4
W14 PB39A 4 T W14 PB39A 4 T
U14 PB39B 4 C D4/SPID3 U14 PB39B 4 C D4/SPID3
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-53
Pinout Information
LatticeECP/EC Family Data Sheet
Y13 PB40A 4 T Y13 PB40A 4 T
V14 PB40B 4 C D5/SPID2 V14 PB40B 4 C D5/SPID2
AA13 PB41A 4 T AA13 PB41A 4 T
GND GND4 4 GND GND4 4
AB13 PB41B 4 C D6/SPID1 AB13 PB41B 4 C D6/SPID1
AA14 PB42A 4 T AA14 PB42A 4 T
Y14 PB42B 4 C Y14 PB42B 4 C
Y15 PB43A 4 T Y15 PB43A 4 T
W15 PB43B 4 C W15 PB43B 4 C
V15 PB44A 4 T V15 PB44A 4 T
T14 PB44B 4 C T14 PB44B 4 C
AB14 PB45A 4 T AB14 PB45A 4 T
GND GND4 4 GND GND4 4
AB15 PB45B 4 C AB15 PB45B 4 C
AB16 PB46A 4 T BDQS46 AB16 PB46A 4 T BDQS46
AA15 PB46B 4 C AA15 PB46B 4 C
AB17 PB47A 4 T AB17 PB47A 4 T
AA16 PB47B 4 C AA16 PB47B 4 C
AB18 PB48A 4 T AB18 PB48A 4 T
AA17 PB48B 4 C AA17 PB48B 4 C
AB19 PB49A 4 T AB19 PB49A 4 T
GND GND4 4 GND GND4 4
AA18 PB49B 4 C AA18 PB49B 4 C
W16 PB50A 4 T W16 PB50A 4 T
U15 PB50B 4 C U15 PB50B 4 C
V16 PB51A 4 T V16 PB51A 4 T
U16 PB51B 4 C U16 PB51B 4 C
Y17 PB52A 4 T Y17 PB52A 4 T
V17 PB52B 4 C V17 PB52B 4 C
AB20 PB53A 4 T AB20 PB53A 4 T
GND GND4 4 GND GND4 4
AA19 PB53B 4 C AA19 PB53B 4 C
Y16 PB54A 4 T BDQS54 Y16 PB54A 4 T BDQS54
W17 PB54B 4 C W17 PB54B 4 C
AA20 PB55A 4 T AA20 PB55A 4 T
Y19 PB55B 4 C Y19 PB55B 4 C
Y18 PB56A 4 T Y18 PB56A 4 T
W18 PB56B 4 C W18 PB56B 4 C
T17 PB57A 4 T T17 PB57A 4 T
U17 PB57B 4 C U17 PB57B 4 C
GND - - GND GND4 4
GND GND4 4 GND GND4 4
GND GND3 3 GND GND4 4
GND - - GND GND3 3
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-54
Pinout Information
LatticeECP/EC Family Data Sheet
W20 PR48B 3 C VREF2_3 W20 PR68B 3 C VREF2_3
Y20 PR48A 3 T VREF1_3 Y20 PR68A 3 T VREF1_3
GND - - GND GND3 3
GND - - GND GND3 3
AA21 PR47B 3 C AA21 PR59B 3 C
AB21 PR47A 3 T AB21 PR59A 3 T
W19 PR46B 3 C W19 PR58B 3 C
V19 PR46A 3 T V19 PR58A 3 T
Y21 PR45B 3 C Y21 PR57B 3 C
AA22 PR45A 3 T RDQS45 AA22 PR57A 3 T RDQS57
V20 PR44B 3 C RLM0_PLLC_IN_A V20 PR56B 3 C RLM0_PLLC_IN_A
GND GND3 3 GND GND3 3
U20 PR44A 3 T RLM0_PLLT_IN_A U20 PR56A 3 T RLM0_PLLT_IN_A
W21 PR43B 3 C RLM0_PLLC_FB_A W21 PR55B 3 C RLM0_PLLC_FB_A
Y22 PR43A 3 T RLM0_PLLT_FB_A Y22 PR55A 3 T RLM0_PLLT_FB_A
V21 PR42B 3 C DI/CSSPIN V21 PR54B 3 C DI/CSSPIN
W22 PR42A 3 T DOUT/CSON W22 PR54A 3 T DOUT/CSON
U21 PR41B 3 C BUSY/SISPI U21 PR53B 3 C BUSY/SISPI
V22 PR41A 3 T D7/SPID0 V22 PR53A 3 T D7/SPID0
T19 CFG2 3 T19 CFG2 3
U19 CFG1 3 U19 CFG1 3
U18 CFG0 3 U18 CFG0 3
V18 PROGRAMN 3 V18 PROGRAMN 3
T20 CCLK 3 T20 CCLK 3
T21 INITN 3 T21 INITN 3
R20 DONE 3 R20 DONE 3
GND GND3 3 GND GND3 3
T18 PR37B 3 C T18 PR49B 3 C
R17 PR37A 3 T R17 PR49A 3 T
R19 PR36B 3 C R19 PR48B 3 C
R18 PR36A 3 T RDQS36 R18 PR48A 3 T RDQS48
U22 PR35B 3 C U22 PR47B 3 C
GND GND3 3 GND GND3 3
T22 PR35A 3 T T22 PR47A 3 T
R21 PR34B 3 C R21 PR46B 3 C
R22 PR34A 3 T R22 PR46A 3 T
P20 PR33B 3 C P20 PR45B 3 C
N20 PR33A 3 T N20 PR45A 3 T
P19 PR32B 3 C P19 PR44B 3 C
P18 PR32A 3 T P18 PR44A 3 T
P21 PR31B 3 C P21 PR43B 3 C
GND GND3 3 GND GND3 3
P22 PR31A 3 T P22 PR43A 3 T
N21 PR30B 3 C N21 PR42B 3 C
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-55
Pinout Information
LatticeECP/EC Family Data Sheet
N22 PR30A 3 T N22 PR42A 3 T
N19 PR29B 3 C N19 PR41B 3 C
N18 PR29A 3 T N18 PR41A 3 T
M21 PR28B 3 C M21 PR40B 3 C
L20 PR28A 3 T RDQS28 L20 PR40A 3 T RDQS40
L21 PR27B 3 C L21 PR39B 3 C
GND GND3 3 GND GND3 3
M20 PR27A 3 T M20 PR39A 3 T
M18 PR26B 3 C M18 PR38B 3 C
M19 PR26A 3 T M19 PR38A 3 T
M22 PR25B 3 C M22 PR37B 3 C
L22 PR25A 3 T L22 PR37A 3 T
K22 PR24B 3 C K22 PR36B 3 C
K21 PR24A 3 T K21 PR36A 3 T
J22 PR22B 2 C PCLKC2_0 J22 PR34B 2 C PCLKC2_0
GND GND2 2 GND GND2 2
J21 PR22A 2 T PCLKT2_0 J21 PR34A 2 T PCLKT2_0
H22 PR21B 2 C H22 PR33B 2 C
H21 PR21A 2 T H21 PR33A 2 T
L19 PR20B 2 C L19 PR32B 2 C
L18 PR20A 2 T L18 PR32A 2 T
K20 PR19B 2 C K20 PR31B 2 C
J20 PR19A 2 T RDQS19 J20 PR31A 2 T RDQS31
K19 PR18B 2 C K19 PR30B 2 C
GND GND2 2 GND GND2 2
K18 PR18A 2 T K18 PR30A 2 T
G22 PR17B 2 C G22 PR29B 2 C
F22 PR17A 2 T F22 PR29A 2 T
F21 PR16B 2 C F21 PR28B 2 C
E22 PR16A 2 T E22 PR28A 2 T
E21 PR15B 2 C E21 PR27B 2 C
D22 PR15A 2 T D22 PR27A 2 T
G21 PR14B 2 C G21 PR26B 2 C
G20 PR14A 2 T G20 PR26A 2 T
GND GND2 2 GND GND2 2
J18 PR13B 2 C J18 PR25B 2 C
H19 PR13A 2 T H19 PR25A 2 T
J19 PR12B 2 C J19 PR24B 2 C
H20 PR12A 2 T H20 PR24A 2 T
H17 PR11B 2 C H17 PR23B 2 C
H18 PR11A 2 T H18 PR23A 2 T RDQS23
D21 PR9B 2 C RUM0_PLLC_FB_A D21 PR17B 2 C RUM0_PLLC_FB_A
GND GND2 2 GND GND2 2
GND - - GND GND2 2
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-56
Pinout Information
LatticeECP/EC Family Data Sheet
C22 PR9A 2 T RUM0_PLLT_FB_A C22 PR17A 2 T RUM0_PLLT_FB_A
G19 PR8B 2 C RUM0_PLLC_IN_A G19 PR16B 2 C RUM0_PLLC_IN_A
G18 PR8A 2 T RUM0_PLLT_IN_A G18 PR16A 2 T RUM0_PLLT_IN_A
F20 PR7B 2 C F20 PR15B 2 C
F19 PR7A 2 T F19 PR15A 2 T
E20 PR6B 2 C E20 PR14B 2 C
D20 PR6A 2 T RDQS6 D20 PR14A 2 T RDQS14
C21 PR5B 2 C C21 PR13B 2 C
GND - - GND GND2 2
C20 PR5A 2 T C20 PR13A 2 T
F18 PR4B 2 C F18 PR12B 2 C
E18 PR4A 2 T E18 PR12A 2 T
B22 PR3B 2 C B22 PR11B 2 C
B21 PR3A 2 T B21 PR11A 2 T
GND - - GND GND2 2
E19 PR2B 2 C VREF1_2 E19 PR2B 2 C VREF1_2
D19 PR2A 2 T VREF2_2 D19 PR2A 2 T VREF2_2
GND GND2 2 GND GND2 2
GND GND1 1 GND GND1 1
GND - - GND GND1 1
G17 PT57B 1 C G17 PT57B 1 C
GND - - GND GND1 1
F17 PT57A 1 T F17 PT57A 1 T
D18 PT56B 1 C D18 PT56B 1 C
C18 PT56A 1 T C18 PT56A 1 T
C19 PT55B 1 C C19 PT55B 1 C
B20 PT55A 1 T B20 PT55A 1 T
D17 PT54B 1 C D17 PT54B 1 C
C16 PT54A 1 T TDQS54 C16 PT54A 1 T TDQS54
B19 PT53B 1 C B19 PT53B 1 C
GND GND1 1 GND GND1 1
A20 PT53A 1 T A20 PT53A 1 T
E17 PT52B 1 C E17 PT52B 1 C
C17 PT52A 1 T C17 PT52A 1 T
F16 PT51B 1 C F16 PT51B 1 C
E16 PT51A 1 T E16 PT51A 1 T
F15 PT50B 1 C F15 PT50B 1 C
D16 PT50A 1 T D16 PT50A 1 T
B18 PT49B 1 C B18 PT49B 1 C
GND GND1 1 GND GND1 1
A19 PT49A 1 T A19 PT49A 1 T
B17 PT48B 1 C B17 PT48B 1 C
A18 PT48A 1 T A18 PT48A 1 T
B16 PT47B 1 C B16 PT47B 1 C
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-57
Pinout Information
LatticeECP/EC Family Data Sheet
A17 PT47A 1 T A17 PT47A 1 T
B15 PT46B 1 C B15 PT46B 1 C
A16 PT46A 1 T TDQS46 A16 PT46A 1 T TDQS46
A15 PT45B 1 C A15 PT45B 1 C
GND GND1 1 GND GND1 1
A14 PT45A 1 T A14 PT45A 1 T
G14 PT44B 1 C G14 PT44B 1 C
E15 PT44A 1 T E15 PT44A 1 T
D15 PT43B 1 C D15 PT43B 1 C
C15 PT43A 1 T C15 PT43A 1 T
C14 PT42B 1 C C14 PT42B 1 C
B14 PT42A 1 T B14 PT42A 1 T
A13 PT41B 1 C A13 PT41B 1 C
GND GND1 1 GND GND1 1
B13 PT41A 1 T B13 PT41A 1 T
E14 PT40B 1 C E14 PT40B 1 C
C13 PT40A 1 T C13 PT40A 1 T
F14 PT39B 1 C F14 PT39B 1 C
D14 PT39A 1 T D14 PT39A 1 T
E13 PT38B 1 C E13 PT38B 1 C
G13 PT38A 1 T TDQS38 G13 PT38A 1 T TDQS38
A12 PT37B 1 C A12 PT37B 1 C
GND GND1 1 GND GND1 1
B12 PT37A 1 T B12 PT37A 1 T
F13 PT36B 1 C F13 PT36B 1 C
D13 PT36A 1 T D13 PT36A 1 T
F12 PT35B 1 C VREF2_1 F12 PT35B 1 C VREF2_1
D12 PT35A 1 T VREF1_1 D12 PT35A 1 T VREF1_1
F11 PT34B 1 C F11 PT34B 1 C
C12 PT34A 1 T C12 PT34A 1 T
A11 PT33B 0 C PCLKC0_0 A11 PT33B 0 C PCLKC0_0
GND GND0 0 GND GND0 0
A10 PT33A 0 T PCLKT0_0 A10 PT33A 0 T PCLKT0_0
E12 PT32B 0 C VREF1_0 E12 PT32B 0 C VREF1_0
E11 PT32A 0 T VREF2_0 E11 PT32A 0 T VREF2_0
B11 PT31B 0 C B11 PT31B 0 C
C11 PT31A 0 T C11 PT31A 0 T
B9 PT30B 0 C B9 PT30B 0 C
B10 PT30A 0 T TDQS30 B10 PT30A 0 T TDQS30
A9 PT29B 0 C A9 PT29B 0 C
GND GND0 0 GND GND0 0
A8 PT29A 0 T A8 PT29A 0 T
D11 PT28B 0 C D11 PT28B 0 C
C10 PT28A 0 T C10 PT28A 0 T
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-58
Pinout Information
LatticeECP/EC Family Data Sheet
A7 PT27B 0 C A7 PT27B 0 C
A6 PT27A 0 T A6 PT27A 0 T
B7 PT26B 0 C B7 PT26B 0 C
B8 PT26A 0 T B8 PT26A 0 T
A5 PT25B 0 C A5 PT25B 0 C
GND GND0 0 GND GND0 0
B6 PT25A 0 T B6 PT25A 0 T
G10 PT24B 0 C G10 PT24B 0 C
E10 PT24A 0 T E10 PT24A 0 T
F10 PT23B 0 C F10 PT23B 0 C
D10 PT23A 0 T D10 PT23A 0 T
G9 PT22B 0 C G9 PT22B 0 C
E9 PT22A 0 T TDQS22 E9 PT22A 0 T TDQS22
C9 PT21B 0 C C9 PT21B 0 C
GND GND0 0 GND GND0 0
C8 PT21A 0 T C8 PT21A 0 T
F9 PT20B 0 C F9 PT20B 0 C
D9 PT20A 0 T D9 PT20A 0 T
F8 PT19B 0 C F8 PT19B 0 C
D7 PT19A 0 T D7 PT19A 0 T
D8 PT18B 0 C D8 PT18B 0 C
C7 PT18A 0 T C7 PT18A 0 T
GND GND0 0 GND GND0 0
A4 PT17B 0 C A4 PT17B 0 C
B4 PT17A 0 T B4 PT17A 0 T
C4 PT16B 0 C C4 PT16B 0 C
C5 PT16A 0 T C5 PT16A 0 T
D6 PT15B 0 C D6 PT15B 0 C
B5 PT15A 0 T B5 PT15A 0 T
E6 PT14B 0 C E6 PT14B 0 C
C6 PT14A 0 T TDQS14 C6 PT14A 0 T TDQS14
A3 PT13B 0 C A3 PT13B 0 C
GND GND0 0 GND GND0 0
B3 PT13A 0 T B3 PT13A 0 T
F6 PT12B 0 C F6 PT12B 0 C
D5 PT12A 0 T D5 PT12A 0 T
F7 PT11B 0 C F7 PT11B 0 C
E8 PT11A 0 T E8 PT11A 0 T
G6 PT10B 0 C G6 PT10B 0 C
E7 PT10A 0 T E7 PT10A 0 T
GND GND0 0 GND GND0 0
GND GND0 0 GND GND0 0
A1 GND - A1 GND -
A22 GND - A22 GND -
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-59
Pinout Information
LatticeECP/EC Family Data Sheet
AB1 GND - AB1 GND -
AB22 GND - AB22 GND -
H15 GND - H15 GND -
H8 GND - H8 GND -
J10 GND - J10 GND -
J11 GND - J11 GND -
J12 GND - J12 GND -
J13 GND - J13 GND -
J14 GND - J14 GND -
J9 GND - J9 GND -
K10 GND - K10 GND -
K11 GND - K11 GND -
K12 GND - K12 GND -
K13 GND - K13 GND -
K14 GND - K14 GND -
K9 GND - K9 GND -
L10 GND - L10 GND -
L11 GND - L11 GND -
L12 GND - L12 GND -
L13 GND - L13 GND -
L14 GND - L14 GND -
L9 GND - L9 GND -
M10 GND - M10 GND -
M11 GND - M11 GND -
M12 GND - M12 GND -
M13 GND - M13 GND -
M14 GND - M14 GND -
M9 GND - M9 GND -
N10 GND - N10 GND -
N11 GND - N11 GND -
N12 GND - N12 GND -
N13 GND - N13 GND -
N14 GND - N14 GND -
N9 GND - N9 GND -
P10 GND - P10 GND -
P11 GND - P11 GND -
P12 GND - P12 GND -
P13 GND - P13 GND -
P14 GND - P14 GND -
P9 GND - P9 GND -
R15 GND - R15 GND -
R8 GND - R8 GND -
J16 VCC - J16 VCC -
J7 VCC - J7 VCC -
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-60
Pinout Information
LatticeECP/EC Family Data Sheet
K16 VCC - K16 VCC -
K17 VCC - K17 VCC -
K6 VCC - K6 VCC -
K7 VCC - K7 VCC -
L17 VCC - L17 VCC -
L6 VCC - L6 VCC -
M17 VCC - M17 VCC -
M6 VCC - M6 VCC -
N16 VCC - N16 VCC -
N17 VCC - N17 VCC -
N6 VCC - N6 VCC -
N7 VCC - N7 VCC -
P16 VCC - P16 VCC -
P7 VCC - P7 VCC -
G11 VCCIO0 0 G11 VCCIO0 0
H10 VCCIO0 0 H10 VCCIO0 0
H11 VCCIO0 0 H11 VCCIO0 0
H9 VCCIO0 0 H9 VCCIO0 0
G12 VCCIO1 1 G12 VCCIO1 1
H12 VCCIO1 1 H12 VCCIO1 1
H13 VCCIO1 1 H13 VCCIO1 1
H14 VCCIO1 1 H14 VCCIO1 1
J15 VCCIO2 2 J15 VCCIO2 2
K15 VCCIO2 2 K15 VCCIO2 2
L15 VCCIO2 2 L15 VCCIO2 2
L16 VCCIO2 2 L16 VCCIO2 2
M15 VCCIO3 3 M15 VCCIO3 3
M16 VCCIO3 3 M16 VCCIO3 3
N15 VCCIO3 3 N15 VCCIO3 3
P15 VCCIO3 3 P15 VCCIO3 3
R12 VCCIO4 4 R12 VCCIO4 4
R13 VCCIO4 4 R13 VCCIO4 4
R14 VCCIO4 4 R14 VCCIO4 4
T12 VCCIO4 4 T12 VCCIO4 4
R10 VCCIO5 5 R10 VCCIO5 5
R11 VCCIO5 5 R11 VCCIO5 5
R9 VCCIO5 5 R9 VCCIO5 5
T11 VCCIO5 5 T11 VCCIO5 5
M7 VCCIO6 6 M7 VCCIO6 6
M8 VCCIO6 6 M8 VCCIO6 6
N8 VCCIO6 6 N8 VCCIO6 6
P8 VCCIO6 6 P8 VCCIO6 6
J8 VCCIO7 7 J8 VCCIO7 7
K8 VCCIO7 7 K8 VCCIO7 7
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-61
Pinout Information
LatticeECP/EC Family Data Sheet
L7 VCCIO7 7 L7 VCCIO7 7
L8 VCCIO7 7 L8 VCCIO7 7
G15 VCCAUX - G15 VCCAUX -
G16 VCCAUX - G16 VCCAUX -
G7 VCCAUX - G7 VCCAUX -
G8 VCCAUX - G8 VCCAUX -
H16 VCCAUX - H16 VCCAUX -
H7 VCCAUX - H7 VCCAUX -
R16 VCCAUX - R16 VCCAUX -
R7 VCCAUX - R7 VCCAUX -
T15 VCCAUX - T15 VCCAUX -
T16 VCCAUX - T16 VCCAUX -
T7 VCCAUX - T7 VCCAUX -
T8 VCCAUX - T8 VCCAUX -
J6 VCC1- J6 VCCPLL -
J17 VCC1- J17 VCCPLL -
P6 VCC1- P6 VCCPLL -
P17 VCC1- P17 VCCPLL -
A2 NC - A2 NC -
AB2 NC - AB2 NC -
A21 NC - A21 NC -
1. Tied to VCCPLL.
LFECP/EC20 and LFECP/EC33 Logic Signal Connections: 484 fpBGA (Cont.)
LFECP20/LFEC20 LFECP/LFEC33
Ball Number Ball Function Bank
LVD
S Dual Function Ball Number Ball Function Bank
LVD
S Dual Function
4-62
Pinout Information
LatticeECP/EC Family Data Sheet
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
GND GND7 7 GND GND7 7
E3 PL2A 7 T VREF2_7 E3 PL2A 7 T VREF2_7
E4 PL2B 7 C VREF1_7 E4 PL2B 7 C VREF1_7
E5 NC - E5 PL6A 7 T LDQS6
D5 NC - D5 PL6B 7 C
F4 NC - F4 PL7A 7 T
F5 NC - F5 PL7B 7 C
C3 NC - C3 PL8A 7 T
D3 NC - D3 PL8B 7 C
C2 NC - C2 PL9A 7 T
--- GNDGND77
B2 NC - B2 PL9B 7 C
B1 PL3A 7 T B1 PL10A 7 T
C1 PL3B 7 C C1 PL10B 7 C
F3 PL4A 7 T F3 PL11A 7 T
G3 PL4B 7 C G3 PL11B 7 C
D2 PL5A 7 T D2 PL12A 7 T
E2 PL5B 7 C E2 PL12B 7 C
--- GNDGND77
D1 PL6A 7 T LDQS6 D1 PL14A 7 T LDQS14
E1 PL6B 7 C E1 PL14B 7 C
F2 PL7A 7 T F2 PL15A 7 T
G2 PL7B 7 C G2 PL15B 7 C
F6 PL8A 7 T LUM0_PLLT_IN_A F6 PL16A 7 T LUM0_PLLT_IN_A
G6 PL8B 7 C LUM0_PLLC_IN_A G6 PL16B 7 C LUM0_PLLC_IN_A
H4 PL9A 7 T LUM0_PLLT_FB_A H4 PL17A 7 T LUM0_PLLT_FB_A
GND GND7 7 GND GND7 7
G4 PL9B 7 C LUM0_PLLC_FB_A G4 PL17B 7 C LUM0_PLLC_FB_A
H6 NC - H6 PL19A 7 T
J7 NC - J7 PL19B 7 C
G5 NC - G5 PL20A 7 T
H5 NC - H5 PL20B 7 C
H3 NC - H3 PL21A 7 T
J3 NC - J3 PL21B 7 C
H2 NC - H2 PL22A 7 T
--- GNDGND77
J2 NC - J2 PL22B 7 C
J4 PL11A 7 T J4 PL23A 7 T LDQS23
J5 PL11B 7 C J5 PL23B 7 C
K4 PL12A 7 T K4 PL24A 7 T
K5 PL12B 7 C K5 PL24B 7 C
J6 PL13A 7 T J6 PL25A 7 T
4-63
Pinout Information
LatticeECP/EC Family Data Sheet
K6 PL13B 7 C K6 PL25B 7 C
F1 PL14A 7 T F1 PL26A 7 T
GND GND7 7 GND GND7 7
G1 PL14B 7 C G1 PL26B 7 C
H1 PL15A 7 T H1 PL27A 7 T
J1 PL15B 7 C J1 PL27B 7 C
K2 PL16A 7 T K2 PL28A 7 T
K1 PL16B 7 C K1 PL28B 7 C
K3 PL17A 7 T K3 PL29A 7 T
L3 PL17B 7 C L3 PL29B 7 C
L2 PL18A 7 T L2 PL30A 7 T
GND GND7 7 GND GND7 7
L1 PL18B 7 C L1 PL30B 7 C
M3 PL19A 7 T LDQS19 M3 PL31A 7 T LDQS31
M4 PL19B 7 C M4 PL31B 7 C
M1 PL20A 7 T M1 PL32A 7 T
M2 PL20B 7 C M2 PL32B 7 C
L4 PL21A 7 T L4 PL33A 7 T
L5 PL21B 7 C L5 PL33B 7 C
N2 PL22A 7 T PCLKT7_0 N2 PL34A 7 T PCLKT7_0
GND GND7 7 GND GND7 7
N1 PL22B 7 C PCLKC7_0 N1 PL34B 7 C PCLKC7_0
N3 XRES 6 N3 XRES 6
P1 PL24A 6 T P1 PL36A 6 T
P2 PL24B 6 C P2 PL36B 6 C
L7 PL25A 6 T L7 PL37A 6 T
L6 PL25B 6 C L6 PL37B 6 C
N4 PL26A 6 T N4 PL38A 6 T
N5 PL26B 6 C N5 PL38B 6 C
R1 PL27A 6 T R1 PL39A 6 T
GND GND6 6 GND GND6 6
R2 PL27B 6 C R2 PL39B 6 C
P4 PL28A 6 T LDQS28 P4 PL40A 6 T LDQS40
P3 PL28B 6 C P3 PL40B 6 C
M5 PL29A 6 T M5 PL41A 6 T
M6 PL29B 6 C M6 PL41B 6 C
T1 PL30A 6 T T1 PL42A 6 T
T2 PL30B 6 C T2 PL42B 6 C
R4 PL31A 6 T R4 PL43A 6 T
GND GND6 6 GND GND6 6
R3 PL31B 6 C R3 PL43B 6 C
N6 PL32A 6 T N6 PL44A 6 T
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-64
Pinout Information
LatticeECP/EC Family Data Sheet
P5 PL32B 6 C P5 PL44B 6 C
P6 PL33A 6 T P6 PL45A 6 T
R5 PL33B 6 C R5 PL45B 6 C
U1 PL34A 6 T U1 PL46A 6 T
U2 PL34B 6 C U2 PL46B 6 C
T3 PL35A 6 T T3 PL47A 6 T
GND GND6 6 GND GND6 6
T4 PL35B 6 C T4 PL47B 6 C
R6 PL36A 6 T LDQS36 R6 PL48A 6 T LDQS48
T5 PL36B 6 C T5 PL48B 6 C
T6 PL37A 6 T T6 PL49A 6 T
U5 PL37B 6 C U5 PL49B 6 C
U3 PL38A 6 T U3 PL50A 6 T
U4 PL38B 6 C U4 PL50B 6 C
V1 PL39A 6 T V1 PL51A 6 T
GND GND6 6 GND GND6 6
V2 PL39B 6 C V2 PL51B 6 C
U7 TCK 6 U7 TCK 6
V4 TDI 6 V4 TDI 6
V5 TMS 6 V5 TMS 6
V3 TDO 6 V3 TDO 6
U6 VCCJ 6 U6 VCCJ 6
W1 PL41A 6 T LLM0_PLLT_IN_A W1 PL53A 6 T LLM0_PLLT_IN_A
W2 PL41B 6 C LLM0_PLLC_IN_A W2 PL53B 6 C LLM0_PLLC_IN_A
V6 PL42A 6 T LLM0_PLLT_FB_A V6 PL54A 6 T LLM0_PLLT_FB_A
W6 PL42B 6 C LLM0_PLLC_FB_A W6 PL54B 6 C LLM0_PLLC_FB_A
Y1 PL43A 6 T Y1 PL55A 6 T
Y2 PL43B 6 C Y2 PL55B 6 C
W3 PL44A 6 T W3 PL56A 6 T
GND GND6 6 GND GND6 6
W4 PL44B 6 C W4 PL56B 6 C
AA1 PL45A 6 T LDQS45 AA1 PL57A 6 T LDQS57
AB1 PL45B 6 C AB1 PL57B 6 C
Y4 PL46A 6 T Y4 PL58A 6 T
Y3 PL46B 6 C Y3 PL58B 6 C
AC1 PL47A 6 T AC1 PL59A 6 T
AB2 PL47B 6 C AB2 PL59B 6 C
AA2 NC - AA2 PL60A 6 T
--- GNDGND66
AA3 NC - AA3 PL60B 6 C
W5 NC - W5 PL61A 6 T
Y5 NC - Y5 PL61B 6 C
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-65
Pinout Information
LatticeECP/EC Family Data Sheet
Y6 NC - Y6 PL62A 6 T
W7 NC - W7 PL62B 6 C
AA4 NC - AA4 PL63A 6 T
AB3 NC - AB3 PL63B 6 C
AC2 NC - AC2 PL64A 6 T
--- GNDGND66
AC3 NC - AC3 PL64B 6 C
AA5 NC - AA5 PL65A 6 T LDQS65
AB5 NC - AB5 PL65B 6 C
AD3 NC - AD3 PL66A 6 T
AD2 NC - AD2 PL66B 6 C
AE1 NC - AE1 PL67A 6 T
AD1 NC - AD1 PL67B 6 C
AB4 PL48A 6 T VREF1_6 AB4 PL68A 6 T VREF1_6
AC4 PL48B 6 C VREF2_6 AC4 PL68B 6 C VREF2_6
GND GND6 6 GND GND6 6
GND GND5 5 GND GND5 5
AB6 PB2A 5 T AB6 PB2A 5 T
AA6 PB2B 5 C AA6 PB2B 5 C
AC7 PB3A 5 T AC7 PB3A 5 T
Y8 PB3B 5 C Y8 PB3B 5 C
AB7 PB4A 5 T AB7 PB4A 5 T
AA7 PB4B 5 C AA7 PB4B 5 C
AC6 PB5A 5 T AC6 PB5A 5 T
AC5 PB5B 5 C AC5 PB5B 5 C
AB8 PB6A 5 T BDQS6 AB8 PB6A 5 T BDQS6
AC8 PB6B 5 C AC8 PB6B 5 C
AE2 PB7A 5 T AE2 PB7A 5 T
AA8 PB7B 5 C AA8 PB7B 5 C
AF2 PB8A 5 T AF2 PB8A 5 T
Y9 PB8B 5 C Y9 PB8B 5 C
AD5 PB9A 5 T AD5 PB9A 5 T
GND GND5 5 GND GND5 5
AD4 PB9B 5 C AD4 PB9B 5 C
AD8 PB10A 5 T AD8 PB10A 5 T
AC9 PB10B 5 C AC9 PB10B 5 C
AE3 PB11A 5 T AE3 PB11A 5 T
AB9 PB11B 5 C AB9 PB11B 5 C
AF3 PB12A 5 T AF3 PB12A 5 T
AD9 PB12B 5 C AD9 PB12B 5 C
AE4 PB13A 5 T AE4 PB13A 5 T
GND GND5 5 GND GND5 5
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-66
Pinout Information
LatticeECP/EC Family Data Sheet
AF4 PB13B 5 C AF4 PB13B 5 C
AE5 PB14A 5 T BDQS14 AE5 PB14A 5 T BDQS14
AA9 PB14B 5 C AA9 PB14B 5 C
AF5 PB15A 5 T AF5 PB15A 5 T
Y10 PB15B 5 C Y10 PB15B 5 C
AD6 PB16A 5 T AD6 PB16A 5 T
AC10 PB16B 5 C AC10 PB16B 5 C
AF6 PB17A 5 T AF6 PB17A 5 T
GND GND5 5 GND GND5 5
AE6 PB17B 5 C AE6 PB17B 5 C
AF7 PB18A 5 T AF7 PB18A 5 T
AB10 PB18B 5 C AB10 PB18B 5 C
AE7 PB19A 5 T AE7 PB19A 5 T
AD10 PB19B 5 C AD10 PB19B 5 C
AD7 PB20A 5 T AD7 PB20A 5 T
AA10 PB20B 5 C AA10 PB20B 5 C
AF8 PB21A 5 T AF8 PB21A 5 T
GND GND5 5 GND GND5 5
AF9 PB21B 5 C AF9 PB21B 5 C
AD11 PB22A 5 T BDQS22 AD11 PB22A 5 T BDQS22
Y11 PB22B 5 C Y11 PB22B 5 C
AE8 PB23A 5 T AE8 PB23A 5 T
AC11 PB23B 5 C AC11 PB23B 5 C
AF10 PB24A 5 T AF10 PB24A 5 T
AB11 PB24B 5 C AB11 PB24B 5 C
AE10 PB25A 5 T AE10 PB25A 5 T
GND GND5 5 GND GND5 5
AE9 PB25B 5 C AE9 PB25B 5 C
AA11 PB26A 5 T AA11 PB26A 5 T
Y12 PB26B 5 C Y12 PB26B 5 C
AE11 PB27A 5 T AE11 PB27A 5 T
AF11 PB27B 5 C AF11 PB27B 5 C
AF12 PB28A 5 T AF12 PB28A 5 T
AE12 PB28B 5 C AE12 PB28B 5 C
AD12 PB29A 5 T AD12 PB29A 5 T
GND GND5 5 GND GND5 5
AC12 PB29B 5 C AC12 PB29B 5 C
AA12 PB30A 5 T BDQS30 AA12 PB30A 5 T BDQS30
AB12 PB30B 5 C AB12 PB30B 5 C
AE13 PB31A 5 T AE13 PB31A 5 T
AF13 PB31B 5 C AF13 PB31B 5 C
AD13 PB32A 5 T VREF2_5 AD13 PB32A 5 T VREF2_5
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-67
Pinout Information
LatticeECP/EC Family Data Sheet
AC13 PB32B 5 C VREF1_5 AC13 PB32B 5 C VREF1_5
AF14 PB33A 5 T PCLKT5_0 AF14 PB33A 5 T PCLKT5_0
GND GND5 5 GND GND5 5
AE14 PB33B 5 C PCLKC5_0 AE14 PB33B 5 C PCLKC5_0
AA13 PB34A 4 T WRITEN AA13 PB34A 4 T WRITEN
AB13 PB34B 4 C CS1N AB13 PB34B 4 C CS1N
AD14 PB35A 4 T VREF1_4 AD14 PB35A 4 T VREF1_4
AA14 PB35B 4 C CSN AA14 PB35B 4 C CSN
AC14 PB36A 4 T VREF2_4 AC14 PB36A 4 T VREF2_4
AB14 PB36B 4 C D0/SPID7 AB14 PB36B 4 C D0/SPID7
AF15 PB37A 4 T D2/SPID5 AF15 PB37A 4 T D2/SPID5
GND GND4 4 GND GND4 4
AE15 PB37B 4 C D1/SPID6 AE15 PB37B 4 C D1/SPID6
AD15 PB38A 4 T BDQS38 AD15 PB38A 4 T BDQS38
AC15 PB38B 4 C D3/SPID4 AC15 PB38B 4 C D3/SPID4
AF16 PB39A 4 T AF16 PB39A 4 T
Y14 PB39B 4 C D4/SPID3 Y14 PB39B 4 C D4/SPID3
AE16 PB40A 4 T AE16 PB40A 4 T
AB15 PB40B 4 C D5/SPID2 AB15 PB40B 4 C D5/SPID2
AF17 PB41A 4 T AF17 PB41A 4 T
GND GND4 4 GND GND4 4
AE17 PB41B 4 C D6/SPID1 AE17 PB41B 4 C D6/SPID1
Y15 PB42A 4 T Y15 PB42A 4 T
AA15 PB42B 4 C AA15 PB42B 4 C
AD17 PB43A 4 T AD17 PB43A 4 T
Y16 PB43B 4 C Y16 PB43B 4 C
AD18 PB44A 4 T AD18 PB44A 4 T
AC16 PB44B 4 C AC16 PB44B 4 C
AE18 PB45A 4 T AE18 PB45A 4 T
GND GND4 4 GND GND4 4
AF18 PB45B 4 C AF18 PB45B 4 C
AD16 PB46A 4 T BDQS46 AD16 PB46A 4 T BDQS46
AB16 PB46B 4 C AB16 PB46B 4 C
AF19 PB47A 4 T AF19 PB47A 4 T
AA16 PB47B 4 C AA16 PB47B 4 C
AA17 PB48A 4 T AA17 PB48A 4 T
Y17 PB48B 4 C Y17 PB48B 4 C
AF21 PB49A 4 T AF21 PB49A 4 T
GND GND4 4 GND GND4 4
AF20 PB49B 4 C AF20 PB49B 4 C
AE21 PB50A 4 T AE21 PB50A 4 T
AC17 PB50B 4 C AC17 PB50B 4 C
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-68
Pinout Information
LatticeECP/EC Family Data Sheet
AF22 PB51A 4 T AF22 PB51A 4 T
AB17 PB51B 4 C AB17 PB51B 4 C
AE22 PB52A 4 T AE22 PB52A 4 T
AA18 PB52B 4 C AA18 PB52B 4 C
AE19 PB53A 4 T AE19 PB53A 4 T
GND GND4 4 GND GND4 4
AE20 PB53B 4 C AE20 PB53B 4 C
AA19 PB54A 4 T BDQS54 AA19 PB54A 4 T BDQS54
Y18 PB54B 4 C Y18 PB54B 4 C
AF23 PB55A 4 T AF23 PB55A 4 T
AA20 PB55B 4 C AA20 PB55B 4 C
AC18 PB56A 4 T AC18 PB56A 4 T
AB18 PB56B 4 C AB18 PB56B 4 C
AF24 PB57A 4 T AF24 PB57A 4 T
--- GNDGND44
AE23 PB57B 4 C AE23 PB57B 4 C
AD19 NC - AD19 PB58A 4 T
AD20 NC - AD20 PB58B 4 C
AC19 NC - AC19 PB59A 4 T
AB19 NC - AB19 PB59B 4 C
AD21 NC - AD21 PB60A 4 T
AC20 NC - AC20 PB60B 4 C
AF25 NC - AF25 PB61A 4 T
--- GNDGND44
AE25 NC - AE25 PB61B 4 C
AB21 NC - AB21 PB62A 4 T BDQS62
AB20 NC - AB20 PB62B 4 C
AE24 NC - AE24 PB63A 4 T
AD23 NC - AD23 PB63B 4 C
AD22 NC - AD22 PB64A 4 T
AC21 NC - AC21 PB64B 4 C
AC22 NC - AC22 PB65A 4 T
AB22 NC - AB22 PB65B 4 C
GND GND4 4 GND GND4 4
GND GND3 3 GND GND3 3
AC23 PR48B 3 C VREF2_3 AC23 PR68B 3 C VREF2_3
AC24 PR48A 3 T VREF1_3 AC24 PR68A 3 T VREF1_3
AD24 NC - AD24 PR67B 3 C
AD25 NC - AD25 PR67A 3 T
AE26 NC - AE26 PR66B 3 C
AD26 NC - AD26 PR66A 3 T
Y20 NC - Y20 PR65B 3 C
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-69
Pinout Information
LatticeECP/EC Family Data Sheet
Y19 NC - Y19 PR65A 3 T RDQS65
AA23 NC - AA23 PR64B 3 C
--- GNDGND33
AA22 NC - AA22 PR64A 3 T
AB23 NC - AB23 PR63B 3 C
AB24 NC - AB24 PR63A 3 T
Y21 NC - Y21 PR62B 3 C
AA21 NC - AA21 PR62A 3 T
Y23 NC - Y23 PR61B 3 C
Y22 NC - Y22 PR61A 3 T
AA24 NC - AA24 PR60B 3 C
--- GNDGND33
Y24 NC - Y24 PR60A 3 T
AC25 PR47B 3 C AC25 PR59B 3 C
AC26 PR47A 3 T AC26 PR59A 3 T
AB25 PR46B 3 C AB25 PR58B 3 C
AA25 PR46A 3 T AA25 PR58A 3 T
AB26 PR45B 3 C AB26 PR57B 3 C
AA26 PR45A 3 T RDQS45 AA26 PR57A 3 T RDQS57
W23 PR44B 3 C RLM0_PLLC_IN_A W23 PR56B 3 C RLM0_PLLC_IN_A
GND GND3 3 GND GND3 3
W24 PR44A 3 T RLM0_PLLT_IN_A W24 PR56A 3 T RLM0_PLLT_IN_A
W22 PR43B 3 C RLM0_PLLC_FB_A W22 PR55B 3 C RLM0_PLLC_FB_A
W21 PR43A 3 T RLM0_PLLT_FB_A W21 PR55A 3 T RLM0_PLLT_FB_A
Y25 PR42B 3 C DI/CSSPIN Y25 PR54B 3 C DI/CSSPIN
Y26 PR42A 3 T DOUT/CSON Y26 PR54A 3 T DOUT/CSON
W25 PR41B 3 C BUSY/SISPI W25 PR53B 3 C BUSY/SISPI
W26 PR41A 3 T D7/SPID0 W26 PR53A 3 T D7/SPID0
V24 CFG2 3 V24 CFG2 3
V21 CFG1 3 V21 CFG1 3
V23 CFG0 3 V23 CFG0 3
V22 PROGRAMN 3 V22 PROGRAMN 3
V20 CCLK 3 V20 CCLK 3
V25 INITN 3 V25 INITN 3
U20 DONE 3 U20 DONE 3
V26 PR39B 3 C V26 PR51B 3 C
GND GND3 3 GND GND3 3
U26 PR39A 3 T U26 PR51A 3 T
U24 PR38B 3 C U24 PR50B 3 C
U25 PR38A 3 T U25 PR50A 3 T
U23 PR37B 3 C U23 PR49B 3 C
U22 PR37A 3 T U22 PR49A 3 T
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-70
Pinout Information
LatticeECP/EC Family Data Sheet
U21 PR36B 3 C U21 PR48B 3 C
T21 PR36A 3 T RDQS36 T21 PR48A 3 T RDQS48
T25 PR35B 3 C T25 PR47B 3 C
GND GND3 3 GND GND3 3
T26 PR35A 3 T T26 PR47A 3 T
T22 PR34B 3 C T22 PR46B 3 C
T23 PR34A 3 T T23 PR46A 3 T
T24 PR33B 3 C T24 PR45B 3 C
R23 PR33A 3 T R23 PR45A 3 T
R25 PR32B 3 C R25 PR44B 3 C
R24 PR32A 3 T R24 PR44A 3 T
R26 PR31B 3 C R26 PR43B 3 C
GND GND3 3 GND GND3 3
P26 PR31A 3 T P26 PR43A 3 T
R21 PR30B 3 C R21 PR42B 3 C
R22 PR30A 3 T R22 PR42A 3 T
P25 PR29B 3 C P25 PR41B 3 C
P24 PR29A 3 T P24 PR41A 3 T
P23 PR28B 3 C P23 PR40B 3 C
P22 PR28A 3 T RDQS28 P22 PR40A 3 T RDQS40
N26 PR27B 3 C N26 PR39B 3 C
GND GND3 3 GND GND3 3
M26 PR27A 3 T M26 PR39A 3 T
N21 PR26B 3 C N21 PR38B 3 C
P21 PR26A 3 T P21 PR38A 3 T
N23 PR25B 3 C N23 PR37B 3 C
N22 PR25A 3 T N22 PR37A 3 T
N25 PR24B 3 C N25 PR36B 3 C
N24 PR24A 3 T N24 PR36A 3 T
L26 PR22B 2 C PCLKC2_0 L26 PR34B 2 C PCLKC2_0
GND GND2 2 GND GND2 2
K26 PR22A 2 T PCLKT2_0 K26 PR34A 2 T PCLKT2_0
M22 PR21B 2 C M22 PR33B 2 C
M23 PR21A 2 T M23 PR33A 2 T
M25 PR20B 2 C M25 PR32B 2 C
M24 PR20A 2 T M24 PR32A 2 T
M21 PR19B 2 C M21 PR31B 2 C
L21 PR19A 2 T RDQS19 L21 PR31A 2 T RDQS31
L22 PR18B 2 C L22 PR30B 2 C
GND GND2 2 GND GND2 2
L23 PR18A 2 T L23 PR30A 2 T
L25 PR17B 2 C L25 PR29B 2 C
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-71
Pinout Information
LatticeECP/EC Family Data Sheet
L24 PR17A 2 T L24 PR29A 2 T
K25 PR16B 2 C K25 PR28B 2 C
J25 PR16A 2 T J25 PR28A 2 T
J26 PR15B 2 C J26 PR27B 2 C
H26 PR15A 2 T H26 PR27A 2 T
H25 PR14B 2 C H25 PR26B 2 C
GND GND2 2 GND GND2 2
J24 PR14A 2 T J24 PR26A 2 T
K21 PR13B 2 C K21 PR25B 2 C
K22 PR13A 2 T K22 PR25A 2 T
K20 PR12B 2 C K20 PR24B 2 C
J20 PR12A 2 T J20 PR24A 2 T
K23 PR11B 2 C K23 PR23B 2 C
K24 PR11A 2 T K24 PR23A 2 T RDQS23
J21 NC - J21 PR22B 2 C
--- GNDGND22
J22 NC - J22 PR22A 2 T
J23 NC - J23 PR21B 2 C
H22 NC - H22 PR21A 2 T
G26 NC - G26 PR20B 2 C
F26 NC - F26 PR20A 2 T
E26 NC - E26 PR19B 2 C
E25 NC - E25 PR19A 2 T
F25 PR9B 2 C RUM0_PLLC_FB_A F25 PR17B 2 C RUM0_PLLC_FB_A
GND GND2 2 GND GND2 2
G25 PR9A 2 T RUM0_PLLT_FB_A G25 PR17A 2 T RUM0_PLLT_FB_A
H23 PR8B 2 C RUM0_PLLC_IN_A H23 PR16B 2 C RUM0_PLLC_IN_A
H24 PR8A 2 T RUM0_PLLT_IN_A H24 PR16A 2 T RUM0_PLLT_IN_A
H21 PR7B 2 C H21 PR15B 2 C
G21 PR7A 2 T G21 PR15A 2 T
D26 PR6B 2 C D26 PR14B 2 C
D25 PR6A 2 T RDQS6 D25 PR14A 2 T RDQS14
F21 PR5B 2 C F21 PR13B 2 C
--- GNDGND22
G22 PR5A 2 T G22 PR13A 2 T
G24 PR4B 2 C G24 PR12B 2 C
G23 PR4A 2 T G23 PR12A 2 T
C26 PR3B 2 C C26 PR11B 2 C
C25 PR3A 2 T C25 PR11A 2 T
F24 NC - F24 PR9B 2 C
--- GNDGND22
F23 NC - F23 PR9A 2 T
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-72
Pinout Information
LatticeECP/EC Family Data Sheet
E24 NC - E24 PR8B 2 C
D24 NC - D24 PR8A 2 T
E22 NC - E22 PR7B 2 C
F22 NC - F22 PR7A 2 T
E21 NC - E21 PR6B 2 C
D22 NC - D22 PR6A 2 T RDQS6
E23 PR2B 2 C VREF1_2 E23 PR2B 2 C VREF1_2
D23 PR2A 2 T VREF2_2 D23 PR2A 2 T VREF2_2
GND GND2 2 GND GND2 2
GND GND1 1 GND GND1 1
G20 NC - G20 PT65B 1 C
F20 NC - F20 PT65A 1 T
D21 NC - D21 PT64B 1 C
C21 NC - C21 PT64A 1 T
C23 NC - C23 PT63B 1 C
C22 NC - C22 PT63A 1 T
B23 NC - B23 PT62B 1 C
C24 NC - C24 PT62A 1 T TDQS62
D20 NC - D20 PT61B 1 C
--- GNDGND11
E19 NC - E19 PT61A 1 T
B25 NC - B25 PT60B 1 C
B24 NC - B24 PT60A 1 T
B26 NC - B26 PT59B 1 C
A25 NC - A25 PT59A 1 T
C20 NC - C20 PT58B 1 C
C19 NC - C19 PT58A 1 T
A24 PT57B 1 C A24 PT57B 1 C
--- GNDGND11
A23 PT57A 1 T A23 PT57A 1 T
E18 PT56B 1 C E18 PT56B 1 C
D19 PT56A 1 T D19 PT56A 1 T
F19 PT55B 1 C F19 PT55B 1 C
B22 PT55A 1 T B22 PT55A 1 T
G19PT54B1C G19PT54B1C
B21 PT54A 1 T TDQS54 B21 PT54A 1 T TDQS54
D18 PT53B 1 C D18 PT53B 1 C
GND GND1 1 GND GND1 1
C18 PT53A 1 T C18 PT53A 1 T
F18 PT52B 1 C F18 PT52B 1 C
A22 PT52A 1 T A22 PT52A 1 T
G18PT51B1C G18PT51B 1C
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-73
Pinout Information
LatticeECP/EC Family Data Sheet
A21 PT51A 1 T A21 PT51A 1 T
E17 PT50B 1 C E17 PT50B 1 C
B17 PT50A 1 T B17 PT50A 1 T
C17 PT49B 1 C C17 PT49B 1 C
GND GND1 1 GND GND1 1
D17 PT49A 1 T D17 PT49A 1 T
F17 PT48B 1 C F17 PT48B 1 C
E20 PT48A 1 T E20 PT48A 1 T
G17PT47B1C G17PT47B 1C
B20 PT47A 1 T B20 PT47A 1 T
E16 PT46B 1 C E16 PT46B 1 C
A20 PT46A 1 T TDQS46 A20 PT46A 1 T TDQS46
A19 PT45B 1 C A19 PT45B 1 C
GND GND1 1 GND GND1 1
B19 PT45A 1 T B19 PT45A 1 T
D16 PT44B 1 C D16 PT44B 1 C
C16 PT44A 1 T C16 PT44A 1 T
F16 PT43B 1 C F16 PT43B 1 C
A18 PT43A 1 T A18 PT43A 1 T
G16PT42B1C G16PT42B 1C
B18 PT42A 1 T B18 PT42A 1 T
A17 PT41B 1 C A17 PT41B 1 C
GND GND1 1 GND GND1 1
A16 PT41A 1 T A16 PT41A 1 T
D15 PT40B 1 C D15 PT40B 1 C
B16 PT40A 1 T B16 PT40A 1 T
E15 PT39B 1 C E15 PT39B 1 C
C15 PT39A 1 T C15 PT39A 1 T
F15 PT38B 1 C F15 PT38B 1 C
G15PT38A1T TDQS38 G15PT38A1T TDQS38
B15 PT37B 1 C B15 PT37B 1 C
GND GND1 1 GND GND1 1
A15 PT37A 1 T A15 PT37A 1 T
E14 PT36B 1 C E14 PT36B 1 C
G14PT36A1T G14PT36A1T
D14 PT35B 1 C VREF2_1 D14 PT35B 1 C VREF2_1
E13 PT35A 1 T VREF1_1 E13 PT35A 1 T VREF1_1
F14 PT34B 1 C F14 PT34B 1 C
C14 PT34A 1 T C14 PT34A 1 T
B14 PT33B 0 C PCLKC0_0 B14 PT33B 0 C PCLKC0_0
GND GND0 0 GND GND0 0
A14 PT33A 0 T PCLKT0_0 A14 PT33A 0 T PCLKT0_0
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-74
Pinout Information
LatticeECP/EC Family Data Sheet
D13 PT32B 0 C VREF1_0 D13 PT32B 0 C VREF1_0
C13 PT32A 0 T VREF2_0 C13 PT32A 0 T VREF2_0
A13 PT31B 0 C A13 PT31B 0 C
B13 PT31A 0 T B13 PT31A 0 T
F13 PT30B 0 C F13 PT30B 0 C
F12 PT30A 0 T TDQS30 F12 PT30A 0 T TDQS30
A12 PT29B 0 C A12 PT29B 0 C
GND GND0 0 GND GND0 0
B12 PT29A 0 T B12 PT29A 0 T
A11 PT28B 0 C A11 PT28B 0 C
B11 PT28A 0 T B11 PT28A 0 T
D12 PT27B 0 C D12 PT27B 0 C
C12 PT27A 0 T C12 PT27A 0 T
B10 PT26B 0 C B10 PT26B 0 C
A10 PT26A 0 T A10 PT26A 0 T
G12PT25B0C G12PT25B 0C
GND GND0 0 GND GND0 0
A9 PT25A 0 T A9 PT25A 0 T
E12 PT24B 0 C E12 PT24B 0 C
B9 PT24A 0 T B9 PT24A 0 T
F11 PT23B 0 C F11 PT23B 0 C
A8 PT23A 0 T A8 PT23A 0 T
D11 PT22B 0 C D11 PT22B 0 C
C11 PT22A 0 T TDQS22 C11 PT22A 0 T TDQS22
B8 PT21B 0 C B8 PT21B 0 C
GND GND0 0 GND GND0 0
B7 PT21A 0 T B7 PT21A 0 T
E11 PT20B 0 C E11 PT20B 0 C
A7 PT20A 0 T A7 PT20A 0 T
G11PT19B0C G11PT19B 0C
C7 PT19A 0 T C7 PT19A 0 T
G10PT18B0C G10PT18B 0C
C6 PT18A 0 T C6 PT18A 0 T
C10 PT17B 0 C C10 PT17B 0 C
GND GND0 0 GND GND0 0
D10 PT17A 0 T D10 PT17A 0 T
F10 PT16B 0 C F10 PT16B 0 C
A6 PT16A 0 T A6 PT16A 0 T
E10 PT15B 0 C E10 PT15B 0 C
C9 PT15A 0 T C9 PT15A 0 T
G9 PT14B 0 C G9 PT14B 0 C
D9 PT14A 0 T TDQS14 D9 PT14A 0 T TDQS14
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-75
Pinout Information
LatticeECP/EC Family Data Sheet
A5 PT13B 0 C A5 PT13B 0 C
GND GND0 0 GND GND0 0
A4 PT13A 0 T A4 PT13A 0 T
F9 PT12B 0 C F9 PT12B 0 C
B6 PT12A 0 T B6 PT12A 0 T
E9 PT11B 0 C E9 PT11B 0 C
C8 PT11A 0 T C8 PT11A 0 T
G8 PT10B 0 C G8 PT10B 0 C
B5 PT10A 0 T B5 PT10A 0 T
A3 PT9B 0 C A3 PT9B 0 C
GND GND0 0 GND GND0 0
A2 PT9A 0 T A2 PT9A 0 T
F8 PT8B 0 C F8 PT8B 0 C
B4 PT8A 0 T B4 PT8A 0 T
E8 PT7B 0 C E8 PT7B 0 C
B3 PT7A 0 T B3 PT7A 0 T
D8 PT6B 0 C D8 PT6B 0 C
G7 PT6A 0 T TDQS6 G7 PT6A 0 T TDQS6
C4 PT5B 0 C C4 PT5B 0 C
C5 PT5A 0 T C5 PT5A 0 T
E7 PT4B 0 C E7 PT4B 0 C
D4 PT4A 0 T D4 PT4A 0 T
F7 PT3B 0 C F7 PT3B 0 C
D6 PT3A 0 T D6 PT3A 0 T
D7 PT2B 0 C D7 PT2B 0 C
E6 PT2A 0 T E6 PT2A 0 T
GND GND0 0 GND GND0 0
K10 GND - K10 GND -
K11 GND - K11 GND -
K12 GND - K12 GND -
K13 GND - K13 GND -
K14 GND - K14 GND -
K15 GND - K15 GND -
K16 GND - K16 GND -
L10GND- L10GND-
L11GND- L11GND-
L12GND- L12GND-
L13GND- L13GND-
L14GND- L14GND-
L15GND- L15GND-
L16GND- L16GND-
L17GND- L17GND-
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-76
Pinout Information
LatticeECP/EC Family Data Sheet
M10 GND - M10 GND -
M11 GND - M11 GND -
M12 GND - M12 GND -
M13 GND - M13 GND -
M14 GND - M14 GND -
M15 GND - M15 GND -
M16 GND - M16 GND -
M17 GND - M17 GND -
N10 GND - N10 GND -
N11 GND - N11 GND -
N12 GND - N12 GND -
N13 GND - N13 GND -
N14 GND - N14 GND -
N15 GND - N15 GND -
N16 GND - N16 GND -
N17 GND - N17 GND -
P10 GND - P10 GND -
P11 GND - P11 GND -
P12 GND - P12 GND -
P13 GND - P13 GND -
P14 GND - P14 GND -
P15 GND - P15 GND -
P16 GND - P16 GND -
P17 GND - P17 GND -
R10 GND - R10 GND -
R11 GND - R11 GND -
R12 GND - R12 GND -
R13 GND - R13 GND -
R14 GND - R14 GND -
R15 GND - R15 GND -
R16 GND - R16 GND -
R17 GND - R17 GND -
T10GND- T10GND -
T11GND- T11GND -
T12GND- T12GND -
T13GND- T13GND -
T14GND- T14GND -
T15GND- T15GND -
T16GND- T16GND -
T17GND- T17GND -
U10 GND - U10 GND -
U11 GND - U11 GND -
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-77
Pinout Information
LatticeECP/EC Family Data Sheet
U12 GND - U12 GND -
U13 GND - U13 GND -
U14 GND - U14 GND -
U15 GND - U15 GND -
U16 GND - U16 GND -
U17 GND - U17 GND -
H10 VCC - H10 VCC -
H11 VCC - H11 VCC -
H16 VCC - H16 VCC -
H17 VCC - H17 VCC -
H18 VCC - H18 VCC -
H19 VCC - H19 VCC -
H8 VCC - H8 VCC -
H9 VCC - H9 VCC -
J18VCC- J18VCC-
J9 VCC - J9 VCC -
K8 VCC - K8 VCC -
L19 VCC - L19 VCC -
M19VCC - M19VCC -
N7 VCC - N7 VCC -
R20 VCC - R20 VCC -
R7 VCC - R7 VCC -
T19 VCC - T19 VCC -
V18 VCC - V18 VCC -
V8 VCC - V8 VCC -
V9 VCC - V9 VCC -
W10 VCC - W10 VCC -
W11 VCC - W11 VCC -
W16 VCC - W16 VCC -
W17 VCC - W17 VCC -
W18 VCC - W18 VCC -
W19 VCC - W19 VCC -
W8 VCC - W8 VCC -
W9 VCC - W9 VCC -
H12 VCCIO0 0 H12 VCCIO0 0
H13 VCCIO0 0 H13 VCCIO0 0
J10 VCCIO0 0 J10 VCCIO0 0
J11 VCCIO0 0 J11 VCCIO0 0
J12 VCCIO0 0 J12 VCCIO0 0
J13 VCCIO0 0 J13 VCCIO0 0
H14 VCCIO1 1 H14 VCCIO1 1
H15 VCCIO1 1 H15 VCCIO1 1
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-78
Pinout Information
LatticeECP/EC Family Data Sheet
J14 VCCIO1 1 J14 VCCIO1 1
J15 VCCIO1 1 J15 VCCIO1 1
J16 VCCIO1 1 J16 VCCIO1 1
J17 VCCIO1 1 J17 VCCIO1 1
K17 VCCIO2 2 K17 VCCIO2 2
K18 VCCIO2 2 K18 VCCIO2 2
L18 VCCIO2 2 L18 VCCIO2 2
M18 VCCIO2 2 M18 VCCIO2 2
N18 VCCIO2 2 N18 VCCIO2 2
N19 VCCIO2 2 N19 VCCIO2 2
P18 VCCIO3 3 P18 VCCIO3 3
P19 VCCIO3 3 P19 VCCIO3 3
R18 VCCIO3 3 R18 VCCIO3 3
R19 VCCIO3 3 R19 VCCIO3 3
T18 VCCIO3 3 T18 VCCIO3 3
U18 VCCIO3 3 U18 VCCIO3 3
V14 VCCIO4 4 V14 VCCIO4 4
V15 VCCIO4 4 V15 VCCIO4 4
V16 VCCIO4 4 V16 VCCIO4 4
V17 VCCIO4 4 V17 VCCIO4 4
W14 VCCIO4 4 W14 VCCIO4 4
W15 VCCIO4 4 W15 VCCIO4 4
V10 VCCIO5 5 V10 VCCIO5 5
V11 VCCIO5 5 V11 VCCIO5 5
V12 VCCIO5 5 V12 VCCIO5 5
V13 VCCIO5 5 V13 VCCIO5 5
W12 VCCIO5 5 W12 VCCIO5 5
W13 VCCIO5 5 W13 VCCIO5 5
P8 VCCIO6 6 P8 VCCIO6 6
P9 VCCIO6 6 P9 VCCIO6 6
R8 VCCIO6 6 R8 VCCIO6 6
R9 VCCIO6 6 R9 VCCIO6 6
T9 VCCIO6 6 T9 VCCIO6 6
U9 VCCIO6 6 U9 VCCIO6 6
K9 VCCIO7 7 K9 VCCIO7 7
L9 VCCIO7 7 L9 VCCIO7 7
M8 VCCIO7 7 M8 VCCIO7 7
M9 VCCIO7 7 M9 VCCIO7 7
N8 VCCIO7 7 N8 VCCIO7 7
N9 VCCIO7 7 N9 VCCIO7 7
G13 VCCAUX - G13 VCCAUX -
H20 VCCAUX - H20 VCCAUX -
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-79
Pinout Information
LatticeECP/EC Family Data Sheet
H7 VCCAUX - H7 VCCAUX -
J19 VCCAUX - J19 VCCAUX -
J8 VCCAUX - J8 VCCAUX -
K7 VCCAUX - K7 VCCAUX -
L20 VCCAUX - L20 VCCAUX -
M20 VCCAUX - M20 VCCAUX -
M7 VCCAUX - M7 VCCAUX -
N20 VCCAUX - N20 VCCAUX -
P20 VCCAUX - P20 VCCAUX -
P7 VCCAUX - P7 VCCAUX -
T20 VCCAUX - T20 VCCAUX -
T7 VCCAUX - T7 VCCAUX -
T8 VCCAUX - T8 VCCAUX -
V19 VCCAUX - V19 VCCAUX -
V7 VCCAUX - V7 VCCAUX -
W20 VCCAUX - W20 VCCAUX -
Y13 VCCAUX - Y13 VCCAUX -
Y7 VCCAUX - Y7 VCCAUX -
K19 VCC1- K19 VCCPLL -
L8 VCC1- L8 VCCPLL -
U19 VCC1- U19 VCCPLL -
U8 VCC1- U8VCCPLL-
1. Tied to VCCPLL.
LFECP/EC20, LFECP/EC33 Logic Signal Connections: 672 fpBGA (Cont.)
LFEC20/LFECP20 LFECP/EC33
Ball
Number
Ball
Function Bank LVDS Dual Function
Ball
Number
Ball
Function Bank LVDS
Dual
Function
4-80
Pinout Information
LatticeECP/EC Family Data Sheet
Thermal Management
Thermal management is recommended as part of any sound FPGA design methodology. To assess the thermal
characteristics of a system, Lattice specifies a maximum allowable junction temperature in all device data sheets.
Designers must complete a thermal analysis of their specific design to ensure that the device and package do not
exceed the junction temperature limits. Refer to the Thermal Management document to find the device/package
specific thermal values.
For Further Information
For further information regarding Thermal Management, refer to the following located on the Lattice website at
www.latticesemi.com.
Thermal Management document
Technical Note TN1052 - Power Estimation and Management for LatticeECP/EC and LatticeXP Devices
Power Calculator tool included with Lattice’s ispLEVER design tool, or as a standalone download from
www.latticesemi.com/software
www.latticesemi.com 5-1 Order Info_02.4
September 2012 Data Sheet
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
Part Number Description
LFXXX
XX
X
X
XXXX
X
Grade
C = Commercial
I = Industrial
L
ogic Capacity
1* = 1.5K LUTs
3* = 3K LUTs
6 = 6K LUTs
10 = 10K LUTs
15 = 15K LUTs
20 = 20K LUTs
33 = 33K LUTs
*Not available in the LatticeECP Family.
S
upply Voltage
E = 1.2V
Speed
3 = Slowest
4
5 = Fastest
Package
T100 = 100-pin TQFP*
T144 = 144-pin TQFP
Q208 = 208-pin PQFP
F256 = 256-ball fpBGA
F484 = 484-ball fpBGA
F672 = 672-ball fpBGA
TN100 = 100-pin Lead-free TQFP*
TN144 = 144-pin Lead-free TQFP
QN208 = 208-pin Lead-free PQFP
FN256 = 256-ball Lead-free fpBG
A
FN484 = 484-ball Lead-free fpBG
A
FN672 = 672-ball Lead-free fpBG
A
D
evice Family
Lattice EC (FPGA)
Lattice ECP (EC FPGA + DSP Blocks)
Ordering Information
Note:þLatticeECP/EC devices are dual marked. For example, the commercial speed grade LFEC20E-4F484C is
also marked with industrial grade -3I (LFEC20E-3F484I). The commercial grade is one speed grade faster than the
associated dual mark industrial grade. The slowest commercial speed grade does not have industrial markings.
The markings appear as follows:
LFEC20E-
4F484C-3I
Datecode
EC
LatticeECP/EC Family Data Sheet
Ordering Information
5-2
Ordering Information
LatticeECP/EC Family Data Sheet
Conventional Packaging
LatticeEC Commercial
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC1E-3Q208C 112 -3 PQFP 208 COM 1.5K
LFEC1E-4Q208C 112 -4 PQFP 208 COM 1.5K
LFEC1E-5Q208C 112 -5 PQFP 208 COM 1.5K
LFEC1E-3T144C 97 -3 TQFP 144 COM 1.5K
LFEC1E-4T144C 97 -4 TQFP 144 COM 1.5K
LFEC1E-5T144C 97 -5 TQFP 144 COM 1.5K
LFEC1E-3T100C 67 -3 TQFP 100 COM 1.5K
LFEC1E-4T100C 67 -4 TQFP 100 COM 1.5K
LFEC1E-5T100C 67 -5 TQFP 100 COM 1.5K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC3E-3F256C 160 -3 fpBGA 256 COM 3.1K
LFEC3E-4F256C 160 -4 fpBGA 256 COM 3.1K
LFEC3E-5F256C 160 -5 fpBGA 256 COM 3.1K
LFEC3E-3Q208C 145 -3 PQFP 208 COM 3.1K
LFEC3E-4Q208C 145 -4 PQFP 208 COM 3.1K
LFEC3E-5Q208C 145 -5 PQFP 208 COM 3.1K
LFEC3E-3T144C 97 -3 TQFP 144 COM 3.1K
LFEC3E-4T144C 97 -4 TQFP 144 COM 3.1K
LFEC3E-5T144C 97 -5 TQFP 144 COM 3.1K
LFEC3E-3T100C 67 -3 TQFP 100 COM 3.1K
LFEC3E-4T100C 67 -4 TQFP 100 COM 3.1K
LFEC3E-5T100C 67 -5 TQFP 100 COM 3.1K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC6E-3F484C 224 -3 fpBGA 484 COM 6.1K
LFEC6E-4F484C 224 -4 fpBGA 484 COM 6.1K
LFEC6E-5F484C 224 -5 fpBGA 484 COM 6.1K
LFEC6E-3F256C 195 -3 fpBGA 256 COM 6.1K
LFEC6E-4F256C 195 -4 fpBGA 256 COM 6.1K
LFEC6E-5F256C 195 -5 fpBGA 256 COM 6.1K
LFEC6E-3Q208C 147 -3 PQFP 208 COM 6.1K
LFEC6E-4Q208C 147 -4 PQFP 208 COM 6.1K
LFEC6E-5Q208C 147 -5 PQFP 208 COM 6.1K
LFEC6E-3T144C 97 -3 TQFP 144 COM 6.1K
LFEC6E-4T144C 97 -4 TQFP 144 COM 6.1K
LFEC6E-5T144C 97 -5 TQFP 144 COM 6.1K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC10E-3F484C 288 -3 fpBGA 484 COM 10.2K
LFEC10E-4F484C 288 -4 fpBGA 484 COM 10.2K
LFEC10E-5F484C 288 -5 fpBGA 484 COM 10.2K
LFEC10E-3F256C 195 -3 fpBGA 256 COM 10.2K
5-3
Ordering Information
LatticeECP/EC Family Data Sheet
LFEC10E-4F256C 195 -4 fpBGA 256 COM 10.2K
LFEC10E-5F256C 195 -5 fpBGA 256 COM 10.2K
LFEC10E-3Q208C 147 -3 PQFP 208 COM 10.2K
LFEC10E-4Q208C 147 -4 PQFP 208 COM 10.2K
LFEC10E-5Q208C 147 -5 PQFP 208 COM 10.2K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC15E-3F484C 352 -3 fpBGA 484 COM 15.3K
LFEC15E-4F484C 352 -4 fpBGA 484 COM 15.3K
LFEC15E-5F484C 352 -5 fpBGA 484 COM 15.3K
LFEC15E-3F256C 195 -3 fpBGA 256 COM 15.3K
LFEC15E-4F256C 195 -4 fpBGA 256 COM 15.3K
LFEC15E-5F256C 195 -5 fpBGA 256 COM 15.3K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC20E-3F672C 400 -3 fpBGA 672 COM 19.7K
LFEC20E-4F672C 400 -4 fpBGA 672 COM 19.7K
LFEC20E-5F672C 400 -5 fpBGA 672 COM 19.7K
LFEC20E-3F484C 360 -3 fpBGA 484 COM 19.7K
LFEC20E-4F484C 360 -4 fpBGA 484 COM 19.7K
LFEC20E-5F484C 360 -5 fpBGA 484 COM 19.7K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC33E-3F672C 496 -3 fpBGA 672 COM 32.8K
LFEC33E-4F672C 496 -4 fpBGA 672 COM 32.8K
LFEC33E-5F672C 496 -5 fpBGA 672 COM 32.8K
LFEC33E-3F484C 360 -3 fpBGA 484 COM 32.8K
LFEC33E-4F484C 360 -4 fpBGA 484 COM 32.8K
LFEC33E-5F484C 360 -5 fpBGA 484 COM 32.8K
LatticeEC Commercial (Continued)
Part Number I/Os Grade Package Pins Temp. LUTs
5-4
Ordering Information
LatticeECP/EC Family Data Sheet
LatticeECP Commercial
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP6E-3F484C 224 -3 fpBGA 484 COM 6.1K
LFECP6E-4F484C 224 -4 fpBGA 484 COM 6.1K
LFECP6E-5F484C 224 -5 fpBGA 484 COM 6.1K
LFECP6E-3F256C 195 -3 fpBGA 256 COM 6.1K
LFECP6E-4F256C 195 -4 fpBGA 256 COM 6.1K
LFECP6E-5F256C 195 -5 fpBGA 256 COM 6.1K
LFECP6E-3Q208C 147 -3 PQFP 208 COM 6.1K
LFECP6E-4Q208C 147 -4 PQFP 208 COM 6.1K
LFECP6E-5Q208C 147 -5 PQFP 208 COM 6.1K
LFECP6E-3T144C 97 -3 TQFP 144 COM 6.1K
LFECP6E-4T144C 97 -4 TQFP 144 COM 6.1K
LFECP6E-5T144C 97 -5 TQFP 144 COM 6.1K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP10E-3F484C 288 -3 fpBGA 484 COM 10.2K
LFECP10E-4F484C 288 -4 fpBGA 484 COM 10.2K
LFECP10E-5F484C 288 -5 fpBGA 484 COM 10.2K
LFECP10E-3F256C 195 -3 fpBGA 256 COM 10.2K
LFECP10E-4F256C 195 -4 fpBGA 256 COM 10.2K
LFECP10E-5F256C 195 -5 fpBGA 256 COM 10.2K
LFECP10E-3Q208C 147 -3 PQFP 208 COM 10.2K
LFECP10E-4Q208C 147 -4 PQFP 208 COM 10.2K
LFECP10E-5Q208C 147 -5 PQFP 208 COM 10.2K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP15E-3F484C 352 -3 fpBGA 484 COM 15.3K
LFECP15E-4F484C 352 -4 fpBGA 484 COM 15.3K
LFECP15E-5F484C 352 -5 fpBGA 484 COM 15.3K
LFECP15E-3F256C 195 -3 fpBGA 256 COM 15.3K
LFECP15E-4F256C 195 -4 fpBGA 256 COM 15.3K
LFECP15E-5F256C 195 -5 fpBGA 256 COM 15.3K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP20E-3F672C 400 -3 fpBGA 672 COM 19.7K
LFECP20E-4F672C 400 -4 fpBGA 672 COM 19.7K
LFECP20E-5F672C 400 -5 fpBGA 672 COM 19.7K
LFECP20E-3F484C 360 -3 fpBGA 484 COM 19.7K
LFECP20E-4F484C 360 -4 fpBGA 484 COM 19.7K
LFECP20E-5F484C 360 -5 fpBGA 484 COM 19.7K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP33E-3F672C 496 -3 fpBGA 672 COM 32.8K
LFECP33E-4F672C 496 -4 fpBGA 672 COM 32.8K
LFECP33E-5F672C 496 -5 fpBGA 672 COM 32.8K
5-5
Ordering Information
LatticeECP/EC Family Data Sheet
LFECP33E-3F484C 360 -3 fpBGA 484 COM 32.8K
LFECP33E-4F484C 360 -4 fpBGA 484 COM 32.8K
LFECP33E-5F484C 360 -5 fpBGA 484 COM 32.8K
LatticeEC Industrial
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC1E-3Q208I 112 -3 PQFP 208 IND 1.5K
LFEC1E-4Q208I 112 -4 PQFP 208 IND 1.5K
LFEC1E-3T144I 97 -3 TQFP 144 IND 1.5K
LFEC1E-4T144I 97 -4 TQFP 144 IND 1.5K
LFEC1E-3T100I 67 -3 TQFP 100 IND 1.5K
LFEC1E-4T100I 67 -4 TQFP 100 IND 1.5K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC3E-3F256I 160 -3 fpBGA 256 IND 3.1K
LFEC3E-4F256I 160 -4 fpBGA 256 IND 3.1K
LFEC3E-3Q208I 145 -3 PQFP 208 IND 3.1K
LFEC3E-4Q208I 145 -4 PQFP 208 IND 3.1K
LFEC3E-3T144I 97 -3 TQFP 144 IND 3.1K
LFEC3E-4T144I 97 -4 TQFP 144 IND 3.1K
LFEC3E-3T100I 67 -3 TQFP 100 IND 3.1K
LFEC3E-4T100I 67 -4 TQFP 100 IND 3.1K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC6E-3F484I 224 -3 fpBGA 484 IND 6.1K
LFEC6E-4F484I 224 -4 fpBGA 484 IND 6.1K
LFEC6E-3F256I 195 -3 fpBGA 256 IND 6.1K
LFEC6E-4F256I 195 -4 fpBGA 256 IND 6.1K
LFEC6E-3Q208I 147 -3 PQFP 208 IND 6.1K
LFEC6E-4Q208I 147 -4 PQFP 208 IND 6.1K
LFEC6E-3T144I 97 -3 TQFP 144 IND 6.1K
LFEC6E-4T144I 97 -4 TQFP 144 IND 6.1K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC10E-3F484I 288 -3 fpBGA 484 IND 10.2K
LFEC10E-4F484I 288 -4 fpBGA 484 IND 10.2K
LFEC10E-3F256I 195 -3 fpBGA 256 IND 10.2K
LFEC10E-4F256I 195 -4 fpBGA 256 IND 10.2K
LFEC10E-3 P208I 147 -3 PQFP 208 IND 10.2K
LFEC10E-4 P208I 147 -4 PQFP 208 IND 10.2K
LatticeECP Commercial (Continued)
Part Number I/Os Grade Package Pins Temp. LUTs
5-6
Ordering Information
LatticeECP/EC Family Data Sheet
LFEC15E-3F484I 352 -3 fpBGA 484 IND 15.3K
LFEC15E-4F484I 352 -4 fpBGA 484 IND 15.3K
LFEC15E-3F256I 195 -3 fpBGA 256 IND 15.3K
LFEC15E-4F256I 195 -4 fpBGA 256 IND 15.3K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC20E-3F672I 400 -3 fpBGA 672 IND 19.7K
LFEC20E-4F672I 400 -4 fpBGA 672 IND 19.7K
LFEC20E-3F484I 360 -3 fpBGA 484 IND 19.7K
LFEC20E-4F484I 360 -4 fpBGA 484 IND 19.7K
Part Number I/Os Grade Package Pins Temp. LUTs
LFEC33E-3F672I 496 -3 fpBGA 672 IND 32.8
LFEC33E-4F672I 496 -4 fpBGA 672 IND 32.8
LFEC33E-3F484I 360 -3 fpBGA 484 IND 32.8
LFEC33E-4F484I 360 -4 fpBGA 484 IND 32.8
LatticeECP Industrial
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP6E-3F484I 224 -3 fpBGA 484 IND 6.1K
LFECP6E-4F484I 224 -4 fpBGA 484 IND 6.1K
LFECP6E-3F256I 195 -3 fpBGA 256 IND 6.1K
LFECP6E-4F256I 195 -4 fpBGA 256 IND 6.1K
LFECP6E-3Q208I 147 -3 PQFP 208 IND 6.1K
LFECP6E-4Q208I 147 -4 PQFP 208 IND 6.1K
LFECP6E-3T144I 97 -3 TQFP 144 IND 6.1K
LFECP6E-4T144I 97 -4 TQFP 144 IND 6.1K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP10E-3F484I 288 -3 fpBGA 484 IND 10.2K
LFECP10E-4F484I 288 -4 fpBGA 484 IND 10.2K
LFECP10E-3F256I 195 -3 fpBGA 256 IND 10.2K
LFECP10E-4F256I 195 -4 fpBGA 256 IND 10.2K
LFECP10E-3Q208I 147 -3 PQFP 208 IND 10.2K
LFECP10E-4Q208I 147 -4 PQFP 208 IND 10.2K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP15E-3F484I 352 -3 fpBGA 484 IND 15.3K
LFECP15E-4F484I 352 -4 fpBGA 484 IND 15.3K
LFECP15E-3F256I 195 -3 fpBGA 256 IND 15.3K
LFECP15E-4F256I 195 -4 fpBGA 256 IND 15.3K
LatticeEC Industrial (Continued)
Part Number I/Os Grade Package Pins Temp. LUTs
5-7
Ordering Information
LatticeECP/EC Family Data Sheet
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP20E-3F672I 400 -3 fpBGA 672 IND 19.7K
LFECP20E-4F672I 400 -4 fpBGA 672 IND 19.7K
LFECP20E-3F484I 360 -3 fpBGA 484 IND 19.7K
LFECP20E-4F484I 360 -4 fpBGA 484 IND 19.7K
Part Number I/Os Grade Package Pins Temp. LUTs
LFECP33E-3F672I 496 -3 fpBGA 672 IND 32.8K
LFECP33E-4F672I 496 -4 fpBGA 672 IND 32.8K
LFECP33E-3F484I 360 -3 fpBGA 484 IND 32.8K
LFECP33E-4F484I 360 -4 fpBGA 484 IND 32.8K
LatticeECP Industrial (Continued)
5-8
Ordering Information
LatticeECP/EC Family Data Sheet
Lead-Free Packaging
LatticeEC Commercial
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC1E-3QN208C 112 -3 Lead-Free PQFP 208 COM 1.5K
LFEC1E-4QN208C 112 -4 Lead-Free PQFP 208 COM 1.5K
LFEC1E-5QN208C 112 -5 Lead-Free PQFP 208 COM 1.5K
LFEC1E-3TN144C 97 -3 Lead-Free TQFP 144 COM 1.5K
LFEC1E-4TN144C 97 -4 Lead-Free TQFP 144 COM 1.5K
LFEC1E-5TN144C 97 -5 Lead-Free TQFP 144 COM 1.5K
LFEC1E-3TN100C 67 -3 Lead-Free TQFP 100 COM 1.5K
LFEC1E-4TN100C 67 -4 Lead-Free TQFP 100 COM 1.5K
LFEC1E-5TN100C 67 -5 Lead-Free TQFP 100 COM 1.5K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC3E-3FN256C 160 -3 Lead-Free fpBGA 256 COM 3.1K
LFEC3E-4FN256C 160 -4 Lead-Free fpBGA 256 COM 3.1K
LFEC3E-5FN256C 160 -5 Lead-Free fpBGA 256 COM 3.1K
LFEC3E-3QN208C 145 -3 Lead-Free PQFP 208 COM 3.1K
LFEC3E-4QN208C 145 -4 Lead-Free PQFP 208 COM 3.1K
LFEC3E-5QN208C 145 -5 Lead-Free PQFP 208 COM 3.1K
LFEC3E-3TN144C 97 -3 Lead-Free TQFP 144 COM 3.1K
LFEC3E-4TN144C 97 -4 Lead-Free TQFP 144 COM 3.1K
LFEC3E-5TN144C 97 -5 Lead-Free TQFP 144 COM 3.1K
LFEC3E-3TN100C 67 -3 Lead-Free TQFP 100 COM 3.1K
LFEC3E-4TN100C 67 -4 Lead-Free TQFP 100 COM 3.1K
LFEC3E-5TN100C 67 -5 Lead-Free TQFP 100 COM 3.1K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC6E-3FN484C 224 -3 Lead-Free fpBGA 484 COM 6.1K
LFEC6E-4FN484C 224 -4 Lead-Free fpBGA 484 COM 6.1K
LFEC6E-5FN484C 224 -5 Lead-Free fpBGA 484 COM 6.1K
LFEC6E-3FN256C 195 -3 Lead-Free fpBGA 256 COM 6.1K
LFEC6E-4FN256C 195 -4 Lead-Free fpBGA 256 COM 6.1K
LFEC6E-5FN256C 195 -5 Lead-Free fpBGA 256 COM 6.1K
LFEC6E-3QN208C 147 -3 Lead-Free PQFP 208 COM 6.1K
LFEC6E-4QN208C 147 -4 Lead-Free PQFP 208 COM 6.1K
LFEC6E-5QN208C 147 -5 Lead-Free PQFP 208 COM 6.1K
LFEC6E-3TN144C 97 -3 Lead-Free TQFP 144 COM 6.1K
LFEC6E-4TN144C 97 -4 Lead-Free TQFP 144 COM 6.1K
LFEC6E-5TN144C 97 -5 Lead-Free TQFP 144 COM 6.1K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC10E-3FN484C 288 -3 Lead-Free fpBGA 484 COM 10.2K
LFEC10E-4FN484C 288 -4 Lead-Free fpBGA 484 COM 10.2K
LFEC10E-5FN484C 288 -5 Lead-Free fpBGA 484 COM 10.2K
LFEC10E-3FN256C 195 -3 Lead-Free fpBGA 256 COM 10.2K
5-9
Ordering Information
LatticeECP/EC Family Data Sheet
LFEC10E-4FN256C 195 -4 Lead-Free fpBGA 256 COM 10.2K
LFEC10E-5FN256C 195 -5 Lead-Free fpBGA 256 COM 10.2K
LFEC10E-3QN208C 147 -3 Lead-Free PQFP 208 COM 10.2K
LFEC10E-4QN208C 147 -4 Lead-Free PQFP 208 COM 10.2K
LFEC10E-5QN208C 147 -5 Lead-Free PQFP 208 COM 10.2K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC15E-3FN484C 352 -3 Lead-Free fpBGA 484 COM 15.3K
LFEC15E-4FN484C 352 -4 Lead-Free fpBGA 484 COM 15.3K
LFEC15E-5FN484C 352 -5 Lead-Free fpBGA 484 COM 15.3K
LFEC15E-3FN256C 195 -3 Lead-Free fpBGA 256 COM 15.3K
LFEC15E-4FN256C 195 -4 Lead-Free fpBGA 256 COM 15.3K
LFEC15E-5FN256C 195 -5 Lead-Free fpBGA 256 COM 15.3K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC20E-3FN672C 400 -3 Lead-Free fpBGA 672 COM 19.7K
LFEC20E-4FN672C 400 -4 Lead-Free fpBGA 672 COM 19.7K
LFEC20E-5FN672C 400 -5 Lead-Free fpBGA 672 COM 19.7K
LFEC20E-3FN484C 360 -3 Lead-Free fpBGA 484 COM 19.7K
LFEC20E-4FN484C 360 -4 Lead-Free fpBGA 484 COM 19.7K
LFEC20E-5FN484C 360 -5 Lead-Free fpBGA 484 COM 19.7K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC33E-3FN672C 496 -3 Lead-Free fpBGA 672 COM 32.8K
LFEC33E-4FN672C 496 -4 Lead-Free fpBGA 672 COM 32.8K
LFEC33E-5FN672C 496 -5 Lead-Free fpBGA 672 COM 32.8K
LFEC33E-3FN484C 360 -3 Lead-Free fpBGA 484 COM 32.8K
LFEC33E-4FN484C 360 -4 Lead-Free fpBGA 484 COM 32.8K
LFEC33E-5FN484C 360 -5 Lead-Free fpBGA 484 COM 32.8K
LatticeEC Commercial (Continued)
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
5-10
Ordering Information
LatticeECP/EC Family Data Sheet
LatticeECP Commercial
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP6E-3FN484C 224 -3 Lead-Free fpBGA 484 COM 6.1K
LFECP6E-4FN484C 224 -4 Lead-Free fpBGA 484 COM 6.1K
LFECP6E-5FN484C 224 -5 Lead-Free fpBGA 484 COM 6.1K
LFECP6E-3FN256C 195 -3 Lead-Free fpBGA 256 COM 6.1K
LFECP6E-4FN256C 195 -4 Lead-Free fpBGA 256 COM 6.1K
LFECP6E-5FN256C 195 -5 Lead-Free fpBGA 256 COM 6.1K
LFECP6E-3QN208C 147 -3 Lead-Free PQFP 208 COM 6.1K
LFECP6E-4QN208C 147 -4 Lead-Free PQFP 208 COM 6.1K
LFECP6E-5QN208C 147 -5 Lead-Free PQFP 208 COM 6.1K
LFECP6E-3TN144C 97 -3 Lead-Free TQFP 144 COM 6.1K
LFECP6E-4TN144C 97 -4 Lead-Free TQFP 144 COM 6.1K
LFECP6E-5TN144C 97 -5 Lead-Free TQFP 144 COM 6.1K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP10E-3FN484C 288 -3 Lead-Free fpBGA 484 COM 10.2K
LFECP10E-4FN484C 288 -4 Lead-Free fpBGA 484 COM 10.2K
LFECP10E-5FN484C 288 -5 Lead-Free fpBGA 484 COM 10.2K
LFECP10E-3FN256C 195 -3 Lead-Free fpBGA 256 COM 10.2K
LFECP10E-4FN256C 195 -4 Lead-Free fpBGA 256 COM 10.2K
LFECP10E-5FN256C 195 -5 Lead-Free fpBGA 256 COM 10.2K
LFECP10E-3QN208C 147 -3 Lead-Free PQFP 208 COM 10.2K
LFECP10E-4QN208C 147 -4 Lead-Free PQFP 208 COM 10.2K
LFECP10E-5QN208C 147 -5 Lead-Free PQFP 208 COM 10.2K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP15E-3FN484C 352 -3 Lead-Free fpBGA 484 COM 15.3K
LFECP15E-4FN484C 352 -4 Lead-Free fpBGA 484 COM 15.3K
LFECP15E-5FN484C 352 -5 Lead-Free fpBGA 484 COM 15.3K
LFECP15E-3FN256C 195 -3 Lead-Free fpBGA 256 COM 15.3K
LFECP15E-4FN256C 195 -4 Lead-Free fpBGA 256 COM 15.3K
LFECP15E-5FN256C 195 -5 Lead-Free fpBGA 256 COM 15.3K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP20E-3FN672C 400 -3 Lead-Free fpBGA 672 COM 19.7K
LFECP20E-4FN672C 400 -4 Lead-Free fpBGA 672 COM 19.7K
LFECP20E-5FN672C 400 -5 Lead-Free fpBGA 672 COM 19.7K
LFECP20E-3FN484C 400 -3 Lead-Free fpBGA 484 COM 19.7K
LFECP20E-4FN484C 400 -4 Lead-Free fpBGA 484 COM 19.7K
LFECP20E-5FN484C 400 -5 Lead-Free fpBGA 484 COM 19.7K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP33E-3FN672C 496 -3 Lead-Free fpBGA 672 COM 32.8K
LFECP33E-4FN672C 496 -4 Lead-Free fpBGA 672 COM 32.8K
LFECP33E-5FN672C 496 -5 Lead-Free fpBGA 672 COM 32.8K
5-11
Ordering Information
LatticeECP/EC Family Data Sheet
LFECP33E-3FN484C 360 -3 Lead-Free fpBGA 484 COM 32.8K
LFECP33E-4FN484C 360 -4 Lead-Free fpBGA 484 COM 32.8K
LFECP33E-5FN484C 360 -5 Lead-Free fpBGA 484 COM 32.8K
LatticeEC Industrial
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC1E-3QN208I 112 -3 Lead-Free PQFP 208 IND 1.5K
LFEC1E-4QN208I 112 -4 Lead-Free PQFP 208 IND 1.5K
LFEC1E-3TN144I 97 -3 Lead-Free TQFP 144 IND 1.5K
LFEC1E-4TN144I 97 -4 Lead-Free TQFP 144 IND 1.5K
LFEC1E-3TN100I 67 -3 Lead-Free TQFP 100 IND 1.5K
LFEC1E-4TN100I 67 -4 Lead-Free TQFP 100 IND 1.5K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC3E-3FN256I 160 -3 Lead-Free fpBGA 256 IND 3.1K
LFEC3E-4FN256I 160 -4 Lead-Free fpBGA 256 IND 3.1K
LFEC3E-3QN208I 145 -3 Lead-Free PQFP 208 IND 3.1K
LFEC3E-4QN208I 145 -4 Lead-Free PQFP 208 IND 3.1K
LFEC3E-3TN144I 97 -3 Lead-Free TQFP 144 IND 3.1K
LFEC3E-4TN144I 97 -4 Lead-Free TQFP 144 IND 3.1K
LFEC3E-3TN100I 67 -3 Lead-Free TQFP 100 IND 3.1K
LFEC3E-4TN100I 67 -4 Lead-Free TQFP 100 IND 3.1K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC6E-3FN484I 224 -3 Lead-Free fpBGA 484 IND 6.1K
LFEC6E-4FN484I 224 -4 Lead-Free fpBGA 484 IND 6.1K
LFEC6E-3FN256I 195 -3 Lead-Free fpBGA 256 IND 6.1K
LFEC6E-4FN256I 195 -4 Lead-Free fpBGA 256 IND 6.1K
LFEC6E-3QN208I 147 -3 Lead-Free PQFP 208 IND 6.1K
LFEC6E-4QN208I 147 -4 Lead-Free PQFP 208 IND 6.1K
LFEC6E-3TN144I 97 -3 Lead-Free TQFP 144 IND 6.1K
LFEC6E-4TN144I 97 -4 Lead-Free TQFP 144 IND 6.1K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC10E-3FN484I 288 -3 Lead-Free fpBGA 484 IND 10.2K
LFEC10E-4FN484I 288 -4 Lead-Free fpBGA 484 IND 10.2K
LFEC10E-3FN256I 195 -3 Lead-Free fpBGA 256 IND 10.2K
LFEC10E-4FN256I 195 -4 Lead-Free fpBGA 256 IND 10.2K
LFEC10E-3QN208I 147 -3 Lead-Free PQFP 208 IND 10.2K
LFEC10E-4QN208I 147 -4 Lead-Free PQFP 208 IND 10.2K
LatticeECP Commercial (Continued)
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
5-12
Ordering Information
LatticeECP/EC Family Data Sheet
LFEC15E-3FN484I 352 -3 Lead-Free fpBGA 484 IND 15.3K
LFEC15E-4FN484I 352 -4 Lead-Free fpBGA 484 IND 15.3K
LFEC15E-3FN256I 195 -3 Lead-Free fpBGA 256 IND 15.3K
LFEC15E-4FN256I 195 -4 Lead-Free fpBGA 256 IND 15.3K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC20E-3FN672I 400 -3 Lead-Free fpBGA 672 IND 19.7K
LFEC20E-4FN672I 400 -4 Lead-Free fpBGA 672 IND 19.7K
LFEC20E-3FN484I 400 -3 Lead-Free fpBGA 484 IND 19.7K
LFEC20E-4FN484I 400 -4 Lead-Free fpBGA 484 IND 19.7K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFEC33E-3FN672I 496 -3 Lead-Free fpBGA 672 IND 32.8K
LFEC33E-4FN672I 496 -4 Lead-Free fpBGA 672 IND 32.8K
LFEC33E-3FN484I 360 -3 Lead-Free fpBGA 484 IND 32.8K
LFEC33E-4FN484I 360 -4 Lead-Free fpBGA 484 IND 32.8K
LatticeECP Industrial
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP6E-3FN484I 224 -3 Lead-Free fpBGA 484 IND 6.1K
LFECP6E-4FN484I 224 -4 Lead-Free fpBGA 484 IND 6.1K
LFECP6E-3FN256I 195 -3 Lead-Free fpBGA 256 IND 6.1K
LFECP6E-4FN256I 195 -4 Lead-Free fpBGA 256 IND 6.1K
LFECP6E-3QN208I 147 -3 Lead-Free PQFP 208 IND 6.1K
LFECP6E-4QN208I 147 -4 Lead-Free PQFP 208 IND 6.1K
LFECP6E-3TN144I 97 -3 Lead-Free TQFP 144 IND 6.1K
LFECP6E-4TN144I 97 -4 Lead-Free TQFP 144 IND 6.1K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP10E-3FN484I 288 -3 Lead-Free fpBGA 484 IND 10.2K
LFECP10E-4FN484I 288 -4 Lead-Free fpBGA 484 IND 10.2K
LFECP10E-3FN256I 195 -3 Lead-Free fpBGA 256 IND 10.2K
LFECP10E-4FN256I 195 -4 Lead-Free fpBGA 256 IND 10.2K
LFECP10E-3QN208I 147 -3 Lead-Free PQFP 208 IND 10.2K
LFECP10E-4QN208I 147 -4 Lead-Free PQFP 208 IND 10.2K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP15E-3FN484I 352 -3 Lead-Free fpBGA 484 IND 15.3K
LFECP15E-4FN484I 352 -4 Lead-Free fpBGA 484 IND 15.3K
LFECP15E-3FN256I 195 -3 Lead-Free fpBGA 256 IND 15.3K
LFECP15E-4FN256I 195 -4 Lead-Free fpBGA 256 IND 15.3K
LatticeEC Industrial (Continued)
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
5-13
Ordering Information
LatticeECP/EC Family Data Sheet
LFECP20E-3FN672I 400 -3 Lead-Free fpBGA 672 IND 19.7K
LFECP20E-4FN672I 400 -4 Lead-Free fpBGA 672 IND 19.7K
LFECP20E-3FN484I 400 -3 Lead-Free fpBGA 484 IND 19.7K
LFECP20E-4FN484I 400 -4 Lead-Free fpBGA 484 IND 19.7K
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
LFECP33E-3FN672I 496 -3 Lead-Free fpBGA 672 IND 32.8K
LFECP33E-4FN672I 496 -4 Lead-Free fpBGA 672 IND 32.8K
LFECP33E-3FN484I 360 -3 Lead-Free fpBGA 484 IND 32.8K
LFECP33E-4FN484I 360 -4 Lead-Free fpBGA 484 IND 32.8K
LatticeECP Industrial (Continued)
Part Number I/Os Grade Package Pins/Balls Temp. LUTs
September 2012 Data Sheet
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com 6-1 Further Info_01.4
For Further Information
A variety of technical notes for the LatticeECP/EC family are available on the Lattice web site at www.latticesemi.com.
LatticeECP/EC sysIO Usage Guide (TN1056)
LatticeECP/EC sysCLOCK PLL Design and Usage Guide (TN1049)
Memory Usage Guide for LatticeECP/EC Devices (TN1051)
LatticeECP/EC DDR Usage Guide (TN1050)
Power Estimation and Management for LatticeECP/EC and LatticeXP Devices (TN1052)
LatticeECP-DSP sysDSP Usage Guide (TN1057)
LatticeECP/EC sysCONFIG Usage Guide (TN1053)
IEEE 1149.1 Boundary Scan Testability in Lattice Devices
For further information about interface standards refer to the following web sites:
JEDEC Standards (LVTTL, LVCMOS, SSTL, HSTL): www.jedec.org
•PCI: ww.pcisig.com
LatticeECP/EC Family Data Sheet
Supplemental Information
September 2012 Data Sheet DS1000
© 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com 7-1
Revision History
Date Version Section Change Summary
June 2004 01.0 Initial release.
August 2004 01.1 Introduction Added new device LFECP/LFEC33 in Table 1-1.
Architecture Added New device LFECP/LFEC33 in Tables 2-9, 2-10 and 2-11.
DC & Switching
Characteristics
Added New device LFECP/LFEC33 on Supply current (Standby) tables.
Added New device LFECP/LFEC33 on Initialization Supply current
tables.
Ordering Information Added 33K Logic Capacity Device in Part Number Description section.
Added EC33, ECP33 device: Industrial and Commercial to Part Number
table.
Corrected I/O counts in the part number tables for 100/144 TQFP and
208 PQFP packages to match Table 1-1 on page 1.
November 2004 01.3 Introduction Changed DDR333 (166MHz) to DDR400 (200MHz)
Added “RSDS” offering to the Features list: Flexible I/O Buffer
Architecture Added information about Secondary Clock Sources
Added information about DCS
Added a section on “Recommended Power-up Sequence”
Updated Figure 2-24 “DQS Routing”
Added DSP Block performance numbers to Table 2-11
Added another row for RSDS in Table 2-13 and Table 2-14
DC & Switching
Characteristics
Updated new timing numbers
Added numbers to derating table
Added DC conditions to RSDS table
Changed LVDS Max. VCCIO to 2.625
Added a row for RSDS in “Operating Condition” table
Updated standby and initialization current table
Added figure 3-12: sysConfig SPI port sequence
Added DDR Timing Table and DDR Timings Figure 3-6
Pinout Information Added LFECP/EC6 to Pin Information
Added LFECP/EC6 to Power Supply and NC Connections
Added LFECP/EC6 144 TQFP Logic Signal Connections
Added LFECP/EC6 208 PQFP Logic Signal Connections
Added LFECP/EC6 256 fpBGA Logic Signal Connections
Added LFECP/EC6 484 fpBGA Logic Signal Connections
Ordering Information Added 33K Logic Capacity Device in Part Number Description section.
Added Part Number table for Commercial EC33.
Added Part Number table for Commercial ECP33.
Added Part Number table for Industrial EC33.
Added Part Number table for Industrial ECP33.
LatticeECP/EC Family Data Sheet
Revision History
7-2
Revision History
LatticeECP/EC Family Data Sheet
December 2004 01.4 Architecture Updated Hot Socketing Recommended Power Up Sequence section.
Pinout Information Added LFEC1, LFEC3, LFECP/EC10, LFECP/EC15 to Pin Information
Added LFEC1, LFEC3, LFECP/EC10, LFECP/EC15 to Power Supply
and NC Connections
Added LFEC1 and LFEC3 100 TQFP Pinout
Added LFEC1 and LFEC3 144 TQFP Pinout
Added LFEC1, LFEC3 and LFECP/EC10 208 PQFP Pinout
Added LFEC3, LFECP/EC10 and LFECP/EC15 256 fpBGA Pinout
Added LFECP/EC10 and LFECP/EC15 484 fpBGA Pinout
Ordering Information Added Lead-Free Package Designators
Added Lead-Free Ordering Part Numbers
Supplemental
Information
Updated list of technical notes.
April 2005 01.5 Architecture EBR memory support section has been updated with clarification.
Updated sysIO buffer pair section.
DC & Switching
Characteristics
Hot Socketing Specification has been updated.
DC Electrical Characteristics table (IIL, IIH) has been updated.
Supply Current (Standby) table has been updated.
Initialization Supply Current table has been updated.
External Switching Characteristics section has been updated.
Removed tRSTW spec. from PLL Parameter table.
tRST specifications have been updated.
sysCONFIG Port Timing Specifications (tBSCL, tIODISS, tPRGMRJ) have
been updated.
Pinout Information Added LFECP/EC33 Pinout Information
Pin Information Summary table has been updated.
Power Supply and NC Connection table has been updated.
484-fpBGA logic connection has been updated (Ball # J6, J17, P6 and
P17 for ECP/EC33 are now called VCCPLL).
672-fpBGA logic connection has been updated (Ball # K19, L8, U19, U8
for ECP/EC33 are now called VCCPLL).
May 2005 01.6 Introduction ECP/EC33 EBR SRAM Bits and Blocks have been updated to 498K and
54 respectively.
Architecture Table 2-10 has been updated (ECP/EC33 EBR SRAM Bits and Blocks
have been updated to 498K and 54 respectively.)
Recommended Power Up Sequence section has been removed.
DC & Switching
Characteristics
Supply Current (Standby) table has been updated.
Initialization Supply Current table has been updated.
Vos test condition has been updated to (VOP+VOM)/2.
Register-to-Register performance table has been updated (rev. G 0.27).
External switching characteristics have been updated (rev. G 0.27).
Internal timing parameters have been updated (rev. G 0.27).
Timing adders have been updated (rev. G 0.27).
sysCONFIG port timing specifications have been updated.
Pinout Information Pin Information Summary table has been updated.
Power Supply and NC Connection table has been updated.
Ordering Information OPN list has been updated.
Date Version Section Change Summary
7-3
Revision History
LatticeECP/EC Family Data Sheet
September 2005 02.0 Architecture sysIO section has been updated.
DC & Switching
Characteristics
Recommended Operating Conditions has been updated with VCCPLL.
DC Electrical Characteristics table has been updated
Removed 5V Tolerant Input Buffer section.
Register-to-Register performance table has been updated (rev. G 0.28).
LatticeECP/EC External Switching Characteristics table has been
updated (rev. G 0.28).
LatticeECP/EC Internal Switching Characteristics table has been
updated (rev. G 0.28).
LatticeECP/EC Family Timing Adders have been updated (rev. G 0.28).
sysCLOCK PLL timing table has been updated (rev. G 0.28)
LatticeECP/EC sysCONFIG Port Timing specification table has been
updated (rev. G 0.28).
Master Clock table has been updated (rev. G 0.28).
JTAG Port Timing specification table has been updated (rev. G 0.28).
Pinout Information Signal Description table has been updated with VCCPLL.
November 2005 02.1 DC & Switching
Characteristics
Pin-to-Pin Performance table has been updated (G 0.30)
- 4:1MUX, 8:1MUX, 16:1MUX, 32:1MUX
Register-to-Register Performance (G 0.30) - No timing number
changes.
External Switching Characteristics (G 0.30) - No timing number
changes.
Internal Switching Characteristics (G 0.30)
-tSUP_DSP, tHP_DSP
, tSUO_DSP, tHO_DSP, tCOI_DSP
, tCOD_DSP numbers
have been updated.
Family Timing Adders (G 0.30) - No timing number changes.
sysCLOCK PLL Timing (G 0.30) - No timing number changes.
sysCONFIG Port Timing Specifications (G 0.30) - No timing number
changes.
Master Clock (G 0.30) - No timing number changes.
JTAG Port Timing Specification (G 0.30) - No timing number changes.
Ordering Information Added 208-PQFP lead-free part numbers.
March 2006 02.2 DC & Switching
Characteristics
Added footnote 3. to VCCAUX in the Recommended Operating Condi-
tions table.
January 2007 02.3 Architecture EBR Asynchronous Reset section added.
February 2007 02.4 Architecture Updated EBR Asynchronous Reset section.
Updated Maximum Number of Elements in a Block table - MAC value for
x9 changed to 2.
May 2007 02.5 Architecture Updated text in Ripple Mode section.
November 2007 02.6 DC & Switching
Characteristics
Added JTAG Port Waveforms diagram.
Updated tRST timing information in the sysCLOCK PLL Timing table.
Pinout Information Added Thermal Management text section.
Supplemental
Information
Updated title list.
February 2008 02.7 DC & Switching
Characteristics
Read/Write Mode (Normal) and Read/Write Mode with Input and Output
Registers waveforms in the EBR Memory Timing Diagrams section
have been updated.
September 2012 02.8 All Updated document with new corporate logo.
Date Version Section Change Summary