3.2 mm x 2.5 mm XO C106A series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 1 of 4 Rev 1.2 A
Description:
The C106A Crystal Oscillator
(XO) Series products provide
a wide range of options in
temperature stability,
operating frequency range,
and multiple supply voltages
in a 3.2 x 2.5 mm ceramic
package.
Features:
•
Available in frequencies from 1.0
MHz to 200MHz.
• Tri-state Enable/Disable
• Hermetically sealed ceramic
SMD package
• TTL/HCMOS compatible
•
RoHS-6/Leadfree compliant
Frequency Range, Operating Temperature, and Frequency Stability:
Frequency Operating Temperature Product Code Freq. Stability Product Code
-10 to +60C A +/- 25 ppm A
0 to +70C B +/- 50 ppm B
-20 to 70C C +/- 75 ppm C
1.000 to 200MHz
-40 to 85C D
+/-100ppm D
• ***Frequency stability includes 25C tolerance, drift over temperature, change versus voltage and load, 20 year aging,
shock and vibration
•
Aging:
(typical at 20MHz after 30 days continuous operation)
Frequency Timeframe
Aging Product Code
20 MHz 1st Year +/- 5.0ppm N/A
Supply Voltage (Vs):
Power Supply (Vs) 1.8 Vdc +/-10% 2.5 Vdc +/-10% 3.3 Vdc +/-10%
Product Code A B C
Supply Voltage Sensitivity ( +/- 10% ) : +/- 2 ppm max. frequency change
Current Consumption ( I
DD
):
I
DD
( at 1.8 V ) I
DD
( at 2.5V )
I
DD
( at 3.3V )
Frequency Range ( MHz ) mA mA mA
1.000 to 9.999 6 8 10
10.000 to 34.999 8 10 15
35.000 to 49.999 15 20 25
50.000 to 79.999 25 30 35
80.000 to 133.000 25 30 35
133.000 to 166.000 N/A 30 35
166.000 to 200.000 N/A N/A 35
**N/A means that frequency range not available for particular supply voltage.
Environmental:
Storage Temperature -55 to +125 °C
3.2 mm x 2.5 mm XO C106A series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 2 of 4 Rev 1.2 A
Output Waveform:
Min Typical Max
Output Symmetry At 50% V
DD
45% 50% 55%
Rise Time ( nS ) Tr 3 5 10
Fall Time ( nS ) Tf 3 5 10
Output Voltage V
OH
90% V
DD
Output Voltage V
OL
10% V
DD
HCMOS load ( pF )
14.85 15.00 15.15
Start-up Time: 5 mS max.
Tri-state function Pin 1:
Pin 1 = logic high ( 0.7*Vsupply ) or open ; Output active at Pin 3
Pin 1 = logic low ( 0.3*Vsupply ) ; high impedance at pin 3 Output disabled
Ordering Options:
Product Family Operating
Temperature
Frequency
Stability
Supply Voltage
Operating
Frequency
C106A A A A XXX.XXXX MHz
C106A B B B XXX.XXXX MHz
C106A C C C XXX.XXXX MHz
C106A D D XXX.XXXX MHz
C106A C A B 10.0000MHz
Part Number Build Example
**Consult Bliley sales if other options required
** Not all combinations of operating frequency and supply voltage are available.
RoHs compliant; -20 to 70C; +/- 25 ppm with a 2.5 volt supply
And 10 MHz nominal operating frequency.
How to Order This Product:
Contact Bliley Technologies with Product Selection Code from Ordering Options Section above.
