TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 FEATURES 1 * * * * * * * 2 * Low ON-State Resistance (10 ) Control Inputs Are 5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.5-V Single-Supply Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) TS5A3157 NO 1 GND 2 5 V+ NC 3 4 COM 6 IN YZP PACKAGE (BOTTOM VIEW) NC 3 4 COM GND 2 5 V+ NO 1 6 IN DESCRIPTION/ORDERING INFORMATION APPLICATIONS * * * * SOT-23 OR SC-70 PACKAGE (TOP VIEW) Sample-and-Hold Circuits Battery-Powered Equipment Audio and Video Signal Routing Communication Circuits The TS5A3157 is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. SUMMARY OF CHARACTERISTICS (1) Configuration Number of channels ON-state resistance (ron) ON-state resistance match (ron) ON-state resistance flatness (ron(flat)) Single Pole Double Throw (SPDT) 1 10 0.15 4 Turn-on/turn-off time (tON/tOFF) 5.7 ns/3.8 ns Break-before-make time (tBBM) 0.5 ns Charge injection (QC) Bandwidth (BW) 7 pC 300 MHz OFF isolation (OISO) -65 dB at 10 MHz Crosstalk (XTALK) -66 dB at 10 MHz Total harmonic distortion (THD) Leakage current (INO(OFF)/INC(OFF)) Power-supply current (I+) Package options (1) 0.01% 0.1 A 10 A 6-pin DSBGA, DBV, or DCK V+ = 5 V and TA = 25C 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoFree is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2005-2007, Texas Instruments Incorporated TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 ORDERING INFORMATION TA -40C to 85C (1) (2) PACKAGE (1) ORDERABLE PART NUMBER TOP-SIDE MARKING (2) NanoFreeTM - WCSP (DSBGA) 0.23-mm Large Bump - YZP (Pb-free) Tape and reel TS5A3157YZPR _ _ _JC_ SOT (SOT-23) - DBV Tape and reel TS5A3157DBVR JC5_ SOT (SC-70) - DCK Tape and reel TS5A3157DCKR JC_ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, * = Pb-free). FUNCTION TABLE NC TO COM, COM TO NC NO TO COM, COM TO NO L ON OFF H OFF ON IN Absolute Minimum and Maximum Ratings (1) (2) over operating free-air temperature range (unless otherwise noted) (3) MIN MAX UNIT -0.5 6.5 V -0.5 V+ + 0.5 V V+ Supply voltage range VNO VNC VCOM Analog voltage range (3) (4) (5) IK Analog port diode current VNC, VNO, VCOM < 0 or VNO, VNC, VCOM > V+ -50 50 mA INO INC ICOM On-state switch current VNC, VNO, VCOM = 0 to V+ -50 50 mA VI Digital input voltage range (3) (4) -0.5 6.5 IIK Digital input clamp current I+ Continuous current through V+ -100 100 mA IGND Continuous current through GND -100 100 mA JA Package thermal impedance (6) Tstg Storage temperature range VI < 0 -50 DBV package 206 DCK package 252 YZP package (1) (2) (3) (4) (5) (6) 2 V mA C/W 132 -65 150 C Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All voltages are with respect to ground, unless otherwise specified. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited to 5.5 V maximum. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NO, NC OFF leakage current NO, NC ON leakage current COM ON leakage current VCOM, VNO, VNC 0 ron 0 (VNO or VNC) V+, ICOM = -30 mA, Switch ON, See Figure 13 ron VNO or VNC = 3.15 V, ICOM = -30 mA, Switch ON, See Figure 13 ron(flat) 0 (VNO or VNC) V+, ICOM = -30 mA, Switch ON, See Figure 13 INO(OFF), INC(OFF) VNO or VNC = 1 V, VCOM = 4.5 V, or VNO or VNC = 4.5 V, VCOM = 1 V, INO(ON), INC(ON) VNO = 1 V, VCOM = Open, or VNO = 4.5 V, VCOM = Open, Switch ON, See Figure 15 ICOM(ON) VCOM = 1 V, VNO or VNC = Open, or VCOM = 4.5 V, VNO or VNC = Open, Switch ON, See Figure 15 25C Full 0.15 4 4.5 V Full 5.5 V 25C Full 5.5 V 25C Full 5.5 V V 0.2 0.3 25C Full 10 12 4.5 V 25C Switch OFF, See Figure 14 5.5 4.5 V 25C Full V+ 5 6 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 A A A Digital Control Input (IN) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V Input leakage current IIH, IIL (1) VI = 5.5 V or 0 25C Full 5.5 V -0.1 0.05 -1 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 3 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 5-V Supply (1) (Continued) V+ = 4.5 V to 5.5 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 5V 1 6 8.5 Full 4.5 V to 5.5 V 1 25C 5V 1 Full 4.5 V to 5.5 V 1 UNIT Dynamic Turn-on time tON VCOM = 3 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 3 V, RL = 300 , CL = 35 pF, See Figure 17 Break-beforemake time tBBM VNC = VNO = V+/2, RL = 50 , CL = 35 pF, See Figure 18 Charge injection QC VGEN = 0, RGEN = 0, 9.5 3.5 6.5 7.5 2 ns ns 25C 5V 1.8 Full 4.5 V to 5.5 V 3 1.8 CL = 0.1 nF, See Figure 22 25C 5V 7 pC 3.5 ns NO, NC OFF capacitance CNO(OFF), VNO or VNC = V+ or GND, CNC(OFF) Switch OFF, See Figure 16 25C 5V 5.5 pF NO, NC ON capacitance CNO(ON), CNC(ON) VNO or VNC = V+ or GND, Switch ON, See Figure 16 25C 5V 17.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 5V 17.5 pF VI = V+ or GND, See Figure 16 25C 5V 2.8 pF Digital input capacitance CI Bandwidth BW RL = 50 , Switch ON, See Figure 19 25C 5V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 20 25C 5V -65 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 21 25C 5V -66 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 23 25C 5V 0.01 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current (1) 4 I+ 25C Full 5.5 V 2.5 5 10 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NO, NC OFF leakage current NO, NC ON leakage current COM ON leakage current VCOM, VNO, VNC ron ron ron(flat) 0 0 (VNO or VNC) V+, ICOM = -24 mA, Switch ON, See Figure 13 VNO or VNC = 2.1 V, ICOM = -24 mA, Switch ON, See Figure 13 0 (VNO or VNC) V+, ICOM = -24 mA, Switch ON, See Figure 13 INO(OFF), INC(OFF) VNO or VNC = 1 V, VCOM = 3 V, or VNO or VNC = 3 V, VCOM = 1 V, INO(ON), INC(ON) VNO or VNC = 1 V, VCOM = Open, or VNO or VNC = 3 V, VCOM = Open, Switch ON, See Figure 15 ICOM(ON) VCOM = 1 V, VNO or VNC = Open, or VCOM = 3 V, VNO or VNC = Open, Switch ON, See Figure 15 25C Full 0.2 9 3V Full 3.6 V 25C Full 3.6 V 25C Full 3.6 V V 0.4 0.3 25C Full 20 20 3V 25C Switch OFF, See Figure 14 12 3V 25C Full V+ 11 12 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 A A A Digital Control Input (IN) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V Input leakage current IIH, IIL (1) VI = 5.5 V or 0 25C Full 3.6 V -0.1 0.05 -1 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 5 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 3.3-V Supply (1) (Continued) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 3.3 V 3.5 7 9.5 Full 3 V to 3.6 V 1.5 25C 3.3 V 1 Full 3 V to 3.6 V 1 25C 3.3 V 2.5 Full 3 V to 3.6 V 2 UNIT Dynamic Turn-on time tON VCOM = 2 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 2 V, RL = 300 , CL = 35 pF, See Figure 17 Break-beforemake time tBBM VNC = VNO = V+/2, RL = 50 , CL = 35 pF, See Figure 18 Charge injection QC VGEN = 0, RGEN = 0, CL = 0.1 nF, See Figure 22 25C 3.3 V 3 pC NO, NC OFF capacitance CNO(OFF) VNO or VNC = V+ or GND, Switch OFF, See Figure 16 25C 3.3 V 5.5 pF NO, NC ON capacitance CNO(ON) VNO or VNC = V+ or GND, Switch ON, See Figure 16 25C 3.3 V 17.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 3.3 V 17.5 pF VI = V+ or GND, See Figure 16 25C 3.3 V 2.8 pF Digital input capacitance CI 10.5 3.5 6.5 7.5 3 ns ns 5 5 ns Bandwidth BW RL = 50 , Switch ON, See Figure 19 25C 3.3 V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 20 25C 3.3 V -65 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 21 25C 3.3 V -66 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 23 25C 3.3 V 0.015 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current (1) 6 I+ 25C Full 3.6 V 2.5 5 10 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NO, NC OFF leakage current NO, NC ON leakage current COM ON leakage current VCOM, VNO, VNC ron ron ron(flat) 0 0 (VNO or VNC) V+, ICOM = -8 mA, Switch ON, See Figure 13 VNO or VNC = 1.6 V, ICOM = -8 mA, Switch ON, See Figure 13 0 (VNO or VNC) V+, ICOM = -8 mA, Switch ON, See Figure 13 INO(OFF), INC(OFF) VNO or VNC = 0.5 V, VCOM = 2.2 V, or VNO or VNC = 2.2 V, VCOM = 0.5 V, INO(ON), INC(ON) VNO or VNC = 0.5 V, VCOM = Open, or VNO or VNC = 2.2 V, VCOM = Open, Switch ON, See Figure 15 ICOM(ON) VCOM = 0.5 V, VNO or VNC = Open, or VCOM = 2.2 V, VNO or VNC = Open, Switch ON, See Figure 15 25C Full 0.3 30 2.3 V Full 2.7 V 25C Full 2.7 V 25C Full 2.7 V V 0.5 0.7 25C Full 45 50 2.3 V 25C Switch OFF, See Figure 14 35 2.3 V 25C Full V+ 40 40 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 A A A Digital Control Input (IN) Input logic high VIH Full V+ x 0.7 5.5 V Input logic low VIL Full 0 V+ x 0.3 V Input leakage current IIH, IIL (1) VI = 5.5 V or 0 25C Full 2.7 V -0.1 0.05 -1 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 7 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 2.5-V Supply (1) (Continued) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 2.5 V 5 8 13.5 Full 2.3 V to 2.7 V 25C 2.5 V 1 Full 2.3 V to 2.7 V 1 UNIT Dynamic Turn-on time tON VCOM = 1.5 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.5 V, RL = 300 , CL = 35 pF, See Figure 17 Break-beforemake time tBBM VNC = VNO = V+/2, RL = 50 , CL = 35 pF, See Figure 18 Charge injection QC VGEN = 0, RGEN = 0, 3.5 14 3.5 6.5 7.5 3.5 5 ns ns 25C 2.5 V Full 2.3 V to 2.7 V CL = 0.1 nF, See Figure 22 25C 2.5 V 2 pC 3 7 7.5 ns NO, NC OFF capacitance CNO(OFF), VNO or VNC = V+ or GND, CNC(OFF) Switch OFF, See Figure 16 25C 2.5 V 5.5 pF NO, NC ON capacitance CNO(ON), CNC(ON) VNO or VNC = V+ or GND, Switch ON, See Figure 16 25C 2.5 V 17.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 2.5 V 17.5 pF VI = V+ or GND, See Figure 16 25C 2.5 V 2.8 pF Digital input capacitance CI Bandwidth BW RL = 50 , Switch ON, See Figure 19 25C 2.5 V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 20 25C 2.5 V -65 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 21 25C 2.5 V -66 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 23 25C 2.5 V 0.025 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current (1) 8 I+ 25C Full 2.7 V 2.5 5 10 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NO, NC OFF leakage current NO, NC ON leakage current COM ON leakage current VCOM, VNO, VNC 0 ron 0 (VNO or VNC) V+, ICOM = -4 mA, Switch ON, See Figure 13 ron VNO or VNC = 1.16 V, ICOM = -4 mA, Switch ON, See Figure 13 ron(flat) 0 (VNO or VNC) V+, ICOM = -4 mA, Switch ON, See Figure 13 INO(OFF), INC(OFF) VNO or VNC = 0.3 V, VCOM = 1.65 V, or VNO or VNC = 1.65 V, VCOM = 0.3 V, INO(ON), INC(ON) VNO or VNC = 0.3 V, VCOM = Open, or VNO or VNC = 1.65 V, VCOM = Open, Switch ON, See Figure 15 ICOM(ON) VCOM = 0.3 V, VNO or VNC = Open, or VCOM = 1.65 V, VNO or VNC = Open, Switch ON, See Figure 15 25C Full 0.5 125 1.65 V Full 1.95 V 25C Full 1.95 V 25C Full 1.95 V V 0.6 0.75 25C Full 160 160 1.65 V 25C Switch OFF, See Figure 14 140 1.65 V 25C Full V+ 130 140 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 -0.1 0.05 0.1 -0.2 0.1 0.2 A A A Digital Control Input (IN) Input logic high VIH Input logic low VIL Input leakage current (1) IIH, IIL V+ x 0.65 Full VI = 5.5 V or 0 Full 0 25C -0.1 Full 1.95 V 0.05 -1 5.5 V V+ x 0.35 V 0.1 1 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 9 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 Electrical Characteristics for 1.8-V Supply (1)(Continued) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25C 1.8 V 5 15 23 Full 1.65 V to 1.95 V 7 25C 1.8 V 1 Full 1.65 V to 1.95 V 1 UNIT Dynamic Turn-on time tON VCOM = 1.3 V, RL = 300 , CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.3 V, RL = 300 , CL = 35 pF, See Figure 17 Break-beforemake time tBBM VNC = VNO = V+/2, RL = 50 , CL = 35 pF, See Figure 18 Charge injection QC VGEN = 0, RGEN = 0, 24 3.5 6.5 7.5 7.5 ns ns 25C 1.8 V 5.5 Full 1.65 V to 1.95 V 9 5.2 CL = 0.1 nF, See Figure 22 25C 1.8 V 1 pC 12 ns NO, NC OFF capacitance CNO(OFF), CNC(OFF) VNO or VNC = V+ or GND, Switch OFF, See Figure 16 25C 1.8 V 5.5 pF NO, NC ON capacitance CNO(ON), CNC(ON) VNO or VNC = V+ or GND, Switch ON, See Figure 16 25C 1.8 V 17.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 16 25C 1.8 V 17.5 pF VI = V+ or GND, See Figure 16 25C 1.8 V 2.8 pF Digital input capacitance CI Bandwidth BW RL = 50 , Switch ON, See Figure 19 25C 1.8 V 300 MHz OFF isolation OISO RL = 50 , f = 10 MHz, Switch OFF, See Figure 20 25C 1.8 V -65 dB Crosstalk XTALK RL = 50 , f = 10 MHz, Switch ON, See Figure 21 25C 1.8 V -66 dB Total harmonic distortion THD RL = 10 k, CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 23 25C 1.8 V 0.015 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current (1) 10 I+ 25C Full 1.95 V 2.5 5 10 A The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 TYPICAL PERFORMANCE 140 16 120 14 12 100 V+ = 1.8 V 10 80 ron (W) ron () 855C 60 40 1 2 -405C 2 V+ = 5 V 0 0 255C 6 4 V+ = 2.5 V V+ = 3.3 V 20 8 3 4 5 0 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 VCOM (V) VCOM (V) Figure 1. ron vs VCOM Figure 2. ron vs VCOM (V+ = 3 V) 10 3.5 Leakage Current (nA) 855C 8 ron (W) 6 255C -405C 4 2 0 ICOM(ON) 2.5 INO(ON) 2.0 INC(OFF) 1.5 INO(OFF) 1.0 0.5 0.0 0 1 2 3 VCOM (V) 4 5 -40C Figure 3. ron vs VCOM (V+ = 4.5 V) 25C TA (C) 85C Figure 4. Leakage Current vs Temperature (V+ = 5.5 V) 8 18 7 16 tON 14 6 12 5 tON/tOFF (ns) Charge Injection (pC) INO(ON) 3.0 V+ = 5 V 4 3 V+ = 3 V 2 1 10 8 6 tOFF 4 2 0 0 1 2 3 4 5 6 0 1.5 Bias Voltage (V) Figure 5. Charge Injection (QC) vs VCOM 2.5 3.5 V+ (V) 4.5 5.5 Figure 6. tON and tOFF vs Supply Voltage Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 11 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 TYPICAL PERFORMANCE 7 3.0 tON 6 VIL 5 2.0 4 3 I+ (A) I+ (A) VIH 2.5 tOFF 1.5 1.0 2 0.5 1 0.0 1.0 0 -40C 25C TA (5C) 85C 1.8 2.6 4.2 5.0 5.8 TA (5C) Figure 7. tON and tOFF vs Temperature (V+ = 5 V) Figure 8. Logic-Level Threshold vs V+ 0.0 0 Crosstalk -0.5 -20 -1.0 -1.5 -40 -2.0 Gain (dB) Gain (dB) 3.4 -2.5 -3.0 -3.5 -4.0 -60 OFF Isolation -80 -100 -4.5 -5.0 1 10 100 -120 0.1 1000 1 Frequency (MHz) 10 0.45 0.4 035 0.3 9 1000 8 7 0.25 0.2 0.15 0.10 0.05 0 6 5 4 3 2 1 0 5 10 15 20 25 Frequency (kH) Figure 11. Total Harmonic Distortion vs Frequency 12 100 Figure 10. OFF Isolation (V+ = 5 V) 0.5 I+ (A) THD + Noise (%) Figure 9. Bandwidth (Gain vs Frequency) (V+ = 5 V) 10 Frequency (MHz) 0 -40C 25C 85C TA (5C) Figure 12. Power-Supply Current vs Temperature (V+ = 5 V) Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 PIN DESCRIPTION PIN NO. NAME 1 NO Normally open DESCRIPTION 2 GND Digital ground 3 NC 4 COM Normally closed 5 V+ Power supply 6 IN Digital control to connect the COM to NO or NC Common PARAMETER DESCRIPTION SYMBOL VCOM DESCRIPTION Voltage at COM VNC Voltage at NC VNO Voltage at NO ron ron ron(flat) Resistance between COM and NC or COM and NO ports when the channel is ON Difference of ron between channels in a specific device Difference between the maximum and minimum value of ron in a channel over the specified range of conditions INC(OFF) Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state INO(OFF) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state INC(ON) Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the output (COM) open INO(ON) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output (COM) open ICOM(ON) Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the ON state and the output (NC or NO) open VIH Minimum input voltage for logic high for the control input (IN) VIL Maximum input voltage for logic low for the control input (IN) VI Voltage at the control input (IN) IIH, IIL Leakage current measured at the control input (IN) tON Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning ON. tOFF Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning OFF. tBBM Break-before-make time. This parameter is measured under the specified range of conditions and by the propagation delay between the output of two adjacent analog channels (NC and NO) when the control signal changes state. QC Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC, NO, or COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input. Charge injection, QC = CL x VCOM, CL is the load capacitance and VCOM is the change in analog output voltage. CNC(OFF) Capacitance at the NC port when the corresponding channel (NC to COM) is OFF CNO(OFF) Capacitance at the NO port when the corresponding channel (NO to COM) is OFF CNC(ON) Capacitance at the NC port when the corresponding channel (NC to COM) is ON CNO(ON) Capacitance at the NO port when the corresponding channel (NO to COM) is ON CCOM(ON) CI Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is ON Capacitance of control input (IN) OISO OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency, with the corresponding channel (NC to COM or NO to COM) in the OFF state. XTALK Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO to NC). This is measured in a specific frequency and in dB. BW Bandwidth of the switch. This is the frequency where the gain of an ON channel is -3 dB below the DC gain. THD Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of root mean square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of fundamental harmonic. I+ Static power-supply current with the control (IN) pin at V+ or GND Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 13 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM Channel ON VNO NO r on + VI ICOM IN VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 13. ON-State Resistance (ron) V+ VNC NC COM + + VNO NO VI VCOM OFF-State Leakage Current Channel OFF VI = VIH or VIL IN + GND Figure 14. OFF-State Leakage Current (INC(OFF), INO(OFF)) V+ VNC NC COM + VNO NO VI VCOM ON-State Leakage Current Channel ON VI = VIH or VIL IN + GND Figure 15. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON)) 14 Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = VIH or VIL VCOM COM Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. VBIAS VI IN GND Figure 16. Capacitance (CI, CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON)) V+ VCOM VI Logic Input(1) (3) NC or NO VNC or VNO NC or NO CL(2) TEST RL CL tON 300 35 pF tOFF 300 35 pF COM RL IN CL(2) RL V+ Logic Input (VI) GND 50% 50% 0 tON Switch Output (VNC or VNO) tOFF 90% 90% All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. (3) See Electrical Characteristic for V COM. (1) (2) Figure 17. Turn-On (tON) and Turn-Off Time (tOFF) Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 15 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 V+ NC or NO V+ Logic Input (VI) VNC or VNO VCOM 50% 0 COM NC or NO CL(2) VI (2) 90% IN Logic Input(1) (1) Switch Output (VCOM) RL 90% tBBM VNC or VNO = V+/2 RL = 50 CL = 35 pF GND All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 18. Break-Before-Make Time (tBBM) V+ Network Analyzer 50 W VNC NC Channel ON: NC to COM COM Source Signal VCOM VI = V+ or GND NO Network Analyzer Setup 50 W VI + Source Power = 0 dBm (632-mV P-P at 50-W load) IN GND DC Bias = 350 mV Figure 19. Bandwidth (BW) 16 Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 V+ Network Analyzer Channel OFF: NC to COM 50 W VNC NC VI = V+ or GND COM Source Signal 50 W VCOM NO Network Analyzer Setup VI 50 W Source Power = 0 dBm (632-mV P-P at 50-W load) IN + GND DC Bias = 350 mV Figure 20. OFF Isolation (OISO) V+ Network Analyzer Channel ON: NC to COM 50 W VNC Channel OFF: NO to COM NC VCOM Source Signal VNO NO 50 W VI IN 50 W VI = V+ or GND + GND Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-W load) DC Bias = 350 mV Figure 21. Crosstalk (XTALK) Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 17 TS5A3157 10- SPDT ANALOG SWITCH www.ti.com SCDS219A - NOVEMBER 2005 - REVISED OCTOBER 2007 V+ RGEN VGEN Logic Input (VI) OFF ON OFF V IL NC or NO COM + VIH VCOM VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) (1) (2) RGEN = 0 CL = 0.1 nF QC = CL x VCOM VI = VIH or VIL GND All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 22. Charge Injection (QC) Channel ON: COM to NC VSOURCE = V+ P-P VI = VIH or VIL RL = 600 fSOURCE = 20 Hz to 20 kHz CL = 50 pF V+/2 V+ Audio Analyzer RL 10 mF Source Signal 10 mF NC COM NO 600 W 600 W VI CL(1) IN + GND 600 W (1) CL includes probe and jig capacitance. Figure 23. Total Harmonic Distortion (THD) 18 Submit Documentation Feedback Copyright (c) 2005-2007, Texas Instruments Incorporated Product Folder Link(s): TS5A3157 PACKAGE OPTION ADDENDUM www.ti.com 22-Jul-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TS5A3157DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A3157DBVRE4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A3157DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A3157DCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A3157DCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A3157DCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A3157YZPR ACTIVE DSBGA YZP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TS5A3157DBVR SOT-23 DBV 6 3000 180.0 8.4 TS5A3157DCKR SC70 DCK 6 3000 178.0 TS5A3157DCKR SC70 DCK 6 3000 178.0 TS5A3157YZPR DSBGA YZP 6 3000 180.0 3.23 3.17 1.37 4.0 8.0 Q3 9.2 2.4 2.4 1.22 4.0 8.0 Q3 9.0 2.4 2.5 1.2 4.0 8.0 Q3 8.4 1.02 1.52 0.63 4.0 8.0 Q1 Pack Materials-Page 1 W Pin1 (mm) Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A3157DBVR TS5A3157DCKR SOT-23 DBV 6 3000 202.0 201.0 28.0 SC70 DCK 6 3000 338.0 343.0 30.0 TS5A3157DCKR SC70 DCK 6 3000 180.0 180.0 18.0 TS5A3157YZPR DSBGA YZP 6 3000 220.0 220.0 34.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated