CRCW...BC e3 www.vishay.com Vishay BCcomponents Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors FEATURES * High volume product suitable for commercial applications * Excellent stability (R/R 1 % for 1000 h at 70 C) * Lead (Pb)-free solder contacts on Ni barrier layer * Metal glaze on high quality ceramic * Protective overglaze * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS CASE SIZE IMPERIAL CASE SIZE METRIC CRCW01005...BC 01005 RR0402M CRCW0201...BC 0201 RR 0603M CRCW0402...BC 0402 RR 1005M CRCW0603...BC 0603 RR 1608M CRCW0805...BC 0805 RR 2012M CRCW1206...BC 1206 RR 3216M CRCW1210...BC 1210 RR 3225M CRCW2010...BC 2010 RR 5025M CRCW2512...BC 2512 RR 6332M TYPE LIMITING ELEMENT VOLTAGE TEMPERATURE TOLERANCE RESISTANCE RANGE SERIES COEFFICIENT % Umax. ppm/K ACRMS/DC V 1 E24; E96 250 10.0 to 1M 2, 5 E24 0.031 15 1 1.0 to 9.76 E24; E96 -200 / +600 2, 5 1.0 to 9.1 E24 Zero-Ohm-Resistor: Rmax. = 50 m, Imax. = 0.5 A 200 10R to 10M 0.5 E96 - 200/+ 400 1R0 to 9R76 100 47R to 1M 0.05 30 200 1 10R to 10M E24; E96 - 200 / + 400 1R0 to 9R76 200 10R to 10M 5 E24 - 200 / + 400 1R0 to 9R1 Zero-Ohm-Resistor: Rmax. = 50 m, Imax. at 70 C = 1.0 A 100 1R0 to 10M 1 E24; E96 0.063 50 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 1.5 A 100 1R0 to 10M 1 E24; E96 0.10 75 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 2.0 A 100 1R0 to 10M 1 E24; E96 0.125 150 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 2.5 A 100 1R0 to 10M 1 E24; E96 0.25 200 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 3.5 A 100 1R0 to 10M 1 E24; E96 0.50 200 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 4.0 A 100 1R0 to 10M 1 E24; E96 0.75 400 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 5.0 A 100 1R0 to 10M 1 E24; E96 1.0 500 200 1R0 to 9R76 200 5 1R0 to 10M E24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 7.0 A POWER RATING P70 W Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. * Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. Revision: 19-Oct-17 Document Number: 28743 1 For technical questions, contact: f3aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRCW...BC e3 www.vishay.com Vishay BCcomponents TECHNICAL SPECIFICATIONS PARAMETER UNIT CRCW 01005...BC CRCW 0201...BC CRCW 0402...BC CRCW 0603...BC CRCW 0805...BC CRCW 1206...BC CRCW 1210...BC CRCW 2010...BC CRCW 2512...BC Rated Dissipation P70 (1) W 0.031 0.050 0.063 0.10 0.125 0.25 0.50 0.75 1.0 Limiting Element Voltage Umax. ACRMS/DC V 15 30 50 75 150 200 200 400 500 Insulation Voltage Uins (1 min) V 30 50 75 100 200 300 300 300 300 Insulation Resistance Operating Temperature Range C Failure Rate C Mass mg 16 25.5 40.5 > 109 -55 to +125 -55 to +155 0.3 x 10-9 0.07 0.17 0.65 2 5.5 10 Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW0603562RFKTCBC C R C W 0 6 0 3 5 6 2 R F K T C B C TYPE RESISTANCE TOLERANCE TCR PACKAGING Special CRCW0100 CRCW0201 CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW2010 CRCW2512 R = decimal K = thousand M = million 0000 = jumper D = 0.5 % F = 1.0 % G = 2.0 % J = 5.0 % Z = Jumper K = 100 ppm/K N = 200 ppm/K R = 250 ppm/K X = -200 ppm/K / +400 ppm/K Y = -200 ppm/K / +600 ppm/K 0 = Jumper TA, TB, TC, TD, TE, TF, TH, TI, TL Up to 2 digits BC = commodity PRODUCT DESCRIPTION: CRCW0603-BC 100 562R 1 % RT6 e3 CRCW0603-BC 100 562R 1% RT6 e3 TYPE TCR RESISTANCE TOLERANCE VALUE PACKAGING LEAD (Pb)-FREE CRCW01005-BC CRCW0201-BC CRCW0402-BC CRCW0603-BC CRCW0805-BC CRCW1206-BC CRCW1210-BC CRCW2010-BC CRCW2512-BC 100 ppm/K 200 ppm/K 250 ppm/K -200 ppm/K / +400 ppm/K -200 ppm/K / +600 ppm/K 10R = 10 562R = 562 10K = 10.0 k 1M = 1 M 0R0 = Jumper 0.5 % 1% 2% 5% RT1, RT2, RT3, RT5, RT6, RT7, RF4, R02, R82 e3 = pure tin termination finish Revision: 19-Oct-17 Document Number: 28743 2 For technical questions, contact: f3aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRCW...BC e3 www.vishay.com Vishay BCcomponents PACKAGING TYPE CRCW01005...BC CODE TL = RT3 TD = RT7 TI = RT2 TE = RF4 TD = RT7 TI = RT2 TE = RF4 TA = RT1 TB = RT5 TC = RT6 TA = RT1 TB = RT5 TC = RT6 TA = RT1 TB = RT5 TC = RT6 TA = RT1 TB = RT5 TC = RT6 TF = R02 TH = R82 CRCW0201...BC CRCW0402...BC CRCW0603...BC CRCW0805...BC CRCW1206...BC CRCW1210...BC CRCW2010...BC CRCW2512...BC QUANTITY 20 000 10 000 20 000 50 000 10 000 20 000 50 000 5000 10 000 20 000 5000 10 000 20 000 5000 10 000 20 000 5000 10 000 20 000 4000 4000 CARRIER TAPE Paper tape acc. to IEC 60286-3, Type 1a WIDTH 8 mm PITCH 2 mm 8 mm 2 mm 8 mm 2 mm 8 mm 4 mm 8 mm 4 mm 8 mm 4 mm 8 mm 4 mm 12 mm 12 mm 4 mm 4 mm REEL DIAMETER 180 mm/7" 180 mm/7" 254 mm/10" 330 mm/13" 180 mm/7" 254 mm/10" 330 mm/13" 180 mm/7" 254 mm/10" 330 mm/13" 180 mm/7" 254 mm/10" 330 mm/13" 180 mm/7" 254 mm/10" 330 mm/13" 180 mm/7" 254 mm/10" 330 mm/13" 180 mm/7" 180 mm/7" DIMENSIONS in millimeters SIZE RECOMMENDED SOLDER PAD DIMENSIONS (1) DIMENSIONS IMPERIAL METRIC H REFLOW SOLDERING L W 01005 0402 0.4 0.02 0.2 0.02 0.13 0.02 0.10 0.03 0.10 0.03 a b l a b l 0.15 0.2 0.2 - - - 0201 0603 0.6 0.05 0.3 0.05 0402 1005 1.0 0.10 0.5 0.05 0.23 0.05 0.15 0.05 0.10 0.05 0.3 0.43 0.2 - - - 0.30 0.05 0.25 0.10 0.2 0.1 0.4 0.6 0.5 - - - 0603 1608 1.6 0.10 0.80 0.10 0.45 0.10 0805 2012 2.0 0.10 1.25 0.15 0.50 0.10 0.35 0.15 0.50 T1 + 0.10 - 0.05 0.3 0.2 T2 WAVE SOLDERING 0.3 0.2 0.5 0.9 1.0 0.9 0.9 1.0 0.35 0.2 0.7 1.3 1.2 0.9 1.3 1.3 0.35 0.15 0.45 0.2 0.9 1.7 2.0 1.1 1.7 2.3 1206 3216 3.05 0.10 1.55 0.10 1210 3225 3.05 0.10 2.5 0.2 0.55 0.10 0.50 0.2 0.50 0.2 0.9 2.5 2.0 1.1 2.5 2.2 2010 5025 5.0 0.20 2.5 0.20 0.55 0.10 0.6 0.2 0.6 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 6.3 0.2 3.20 0.20 0.55 0.1 0.6 0.2 0.6 0.2 1.0 3.2 5.2 1.2 3.2 5.2 Notes (1) The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or boardmaterials maybe required to maintain the reliability of the assembly. The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other parameters. Still the given solder pad dimensions will be found adequate for most general applications. (2) No marking for 01005, 0201, and 0402 sizes. Revision: 19-Oct-17 Document Number: 28743 3 For technical questions, contact: f3aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRCW...BC e3 www.vishay.com Vishay BCcomponents Rated Power in % DERATING 120 CRCW-BC e3 CRCW01005-BC e3 100 80 60 40 20 0 - 55 - 25 0 25 50 75 70 100 125 155 175 Ambient Temperature in C TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD REQUIREMENTS PERMISSIBLE CHANGE (R) TEST PROCEDURE STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER SIZE 0201 1 to 10 M 1 to 10 M 1 to 10 M Stability for product types: CRCW....BC e3 4.5 - Resistance - 1% 5% 0.5 %, 1 %, 5 % 4.8.4.2 - Temperature coefficient (20 / -55 / 20) C and (20 / 125 / 20) C 100 ppm/K, 200 ppm/K 200 ppm/K 100 ppm/K, 200 ppm/K, - 200 ppm/K/ + 400 ppm/K 4.13 - Short time overload U = 2.5 x P 70 x R 2 x Umax.; duration: Acc. to the style 4.17.5 4.18.2 4.19 4.24 58 (Td) Solderability 58 (Td) Resistance to soldering heat 14 (Na) Rapid change of temperature 78 (Cab) Revision: 19-Oct-17 Damp heat, steady state Pre-aging 4 h at 155 C, dryheat (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) (1 % R + 0.05 ) Solder bath method; Sn60Pb40 non activated flux; (235 5) C (2 0.2) s Good tinning ( 95 % covered) no visible damage Solder bath method; Sn96.5Ag3Cu0.5 non activated flux; (245 5) C (3 0.3) s Good tinning ( 95 % covered) no visible damage Solder bath method (260 5) C; (10 1) s 30 min. at - 55 C; 30 min. at 125 C; 5 cycles (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) (1 % R + 0.05 ) (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) (0.5 % R + 0.05 ) 1000 cycles (1 % R + 0.05 ) (1 % R + 0.05 ) (1 % R + 0.05 ) (40 2) C; 56 days; (93 3) % RH (1 % R + 0.05 ) (2 % R + 0.1 ) (2 % R + 0.1 ) Document Number: 28743 4 For technical questions, contact: f3aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRCW...BC e3 www.vishay.com Vishay BCcomponents TEST PROCEDURES AND REQUIREMENTS REQUIREMENTS PERMISSIBLE CHANGE (R) IEC EN 60115-1 60068-2 CLAUSE TEST METHOD STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER SIZE 0201 1 to 10 M 1 to 10 M 1 to 10 M (1 % R + 0.05 ) (2 % R + 0.1 ) (2 % R + 0.1 ) 70 C; 1000 h (1 % R + 0.05 ) (2 % R + 0.1 ) (2 % R + 0.1 ) 70 C; 8000 h (2 % R + 0.1 ) (4 % R + 0.1 ) (4 % R + 0.1 ) 125 C, 1000 h (1 % R + 0.05 ) (2 % R + 0.1 ) (2 % R + 0.1 ) TEST PROCEDURE Stability for product types: CRCW....BC e3 - Climatic sequence: - 4.23.2 2 (Ba) Dry heat 125 C; 16 h 4.23.3 30 (Db) Damp heat, cyclic 55 C; 90 % RH; 24 h; 1 cycle 4.23.4 1 (Aa) Cold -55 C; 2 h 4.23.5 13 (M) Low air pressure 1 kPa; (25 10) C; 1 h 4.23.6 30 (Db) Damp heat, cyclic 55 C; 90 % RH; 24 h; 5 cycles 4.23.7 - DC load 4.23 P 70 x R Umax. U= U = P 70 x R Umax.; 1.5 h on; 0.5 h off; 4.25.1 Endurance at 70 C - 4.25.3 Endurance at 125 C - TEST PROCEDURES AND REQUIREMENTS REQUIREMENTS PERMISSIBLE CHANGE (R) IEC 60068-2 TEST METHOD TEST 4.5 - Resistance - 1 %; 2 %; 5 % 4.13 - Short time overload U = 2.5 x P 70 x R 2 x Umax.; duration according to style (2 % R + 0.1 ) Solder bath method; Sn60Pb40 non activated flux; (235 5) C (2 0.2) s Good tinning ( 95 % covered) no visible damage Solder bath method; Sn96.5Ag3Cu0.5 non-activated flux; (235 3) C (2 0.5) s Good tinning ( 95 % covered) no visible damage EN 60115-1 CLAUSE PROCEDURE STABILITY CLASS 1 OR BETTER Stability for product types: CRCW01005 e3 4.17.2 4.8.4.2 4.33 Revision: 19-Oct-17 58 (Td) Solderability 1 to 1 M - Temperature coefficient (20/-55/20) C and (20/125/20) C - 200 ppm/K/+600 ppm/K, 250 ppm/K 21 (Uu1) Substrate bending Depth 3 mm; 1 time No visible damage, no open circuit in bent position (1 % R + 0.05 ) Document Number: 28743 5 For technical questions, contact: f3aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRCW...BC e3 www.vishay.com Vishay BCcomponents TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 1 OR BETTER TEST Stability for product types: CRCW01005 e3 1 to 1 M 14 (Na) Rapid change of temperature 15 min. at -55 C; 15 min. at 125 C; 300 cycles (2 % R + 0.1 ) 4.25.1 - Endurance at 70 C U = P 70 x R Umax.; 1.5 h on; 0.5 h off; 70 C; 1000 h (5 % R + 0.1 ) 4.18.2 58 (Td) Resistance to soldering heat Solder bath method (260 5) C; (10 1) s (2 % R + 0.1 ) 78 (Cab) Damp heat, steady state (40 2) C; (90 to 95) % RH; 1000 h (5 % R + 0.1 ) - Endurance at upper category temperature 125 C, 1000 h (2 % R + 0.1 ) 45 (XA) Component solvent resistance Isopropyl alcohol; (20 to 25) C; (5 0.5) min No visible damage 4.19 4.24 4.25.3 4.29 APPLICABLE SPECIFICATIONS * EN60115-1 Generic specification * IEC 60068-2-X Environmental test procedures * EN60115-8 Sectional specification * IEC 60286-3 Packaging of SMD components * EN140401-802 Detail specification Revision: 19-Oct-17 Document Number: 28743 6 For technical questions, contact: f3aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000