Glass Passivated Bridge Rectifiers
Page <1> 14/04/11 V1.1
Diameters : Inches (Millimetres)
GBPC
Mechanical Data
Case : Moulded plastic body.
Terminals : Pure tin plated, lead free leads solderable per MIL-STD-202, Method 208.
Mounting torque : 20 inches-lbs. maximum.
Features:
••UL Recognized file # E-326243.
••The Plastic material used carries underwriters laboratory flammability
recognition 94V-0.
••Integrally moulded heatsink provide very low thermal resistance for maximum
heat dissipation.
••Surge overload ratings from 300 amperes to 400 amperes.
••Typical IRless than 0.2µA.
••High temperature soldering guaranteed:
260°C / 10 seconds / 0.375 inches, (9.5mm) lead lengths (for wire type).
••Isolated voltage from case to lead over 2500 volts.
Glass Passivated Bridge Rectifiers
Page <2> 14/04/11 V1.1
Maximum Rating and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol -005 Units
Maximum Recurrent Peak Reverse Voltage VRRM 50
VMaximum RMS Voltage VRMS 35
Maximum DC Blocking Voltage VDC 50
Rectified Current GBPC25 IF (AV)
25
A
Single Sine-wave Superimposed GBPC25 IFSM 300
Forward Voltage Drop Per GBPC25 12.5A VF1.1 V
Maximum DC Reverse Current
at Rated DC Blocking Voltage Per Element (Note 1) IR5µA
Typical Thermal Resistance RθJC 1.5 °C/W
Operating and Storage Temperature Range TJ, TSTG -50 to +150 °C
Notes: 1. Pulse test with PW = 300µsec, 1% duty cycle.
2. Suffix “W” - wire lead structure/”M” - terminal location face to face.
Ratings and Characteristic Curves (GBPC25005)
Maximum Forward Current Derating Curve Typical Reverse Characteristics Per Bridge Element
Glass Passivated Bridge Rectifiers
Page <3> 14/04/11 V1.1
Ratings and Characteristic Curves (GBPC25005)
Maximum Non-Repetitive Forward Surge Current
Per Bridge Element Typical Reverse Characteristics Per
Bridge Element
Typical Junction Capacitance
Part Number Table
Description Part Number
Bridge Rectifier, 25A, 50V GBPC25005
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibilit y for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.
