SMF5V0A-M to SMF51A-M www.vishay.com Vishay Semiconductors Surface Mount ESD Protection Diodes FEATURES * * * * 2 1 * 20278 * 17249 MARKING (example only) * XX YY * * * 22623 Bar = cathode marking YY = type code (see table below) XX = date code * * * * For surface mounted applications Low-profile package Optimized for LAN protection applications Ideal for ESD protection of data lines in accordance with IEC 61000-4-2 (IEC 801-2) Ideal for EFT protection of data lines in accordance with IEC 61000-4-4 (IEC 801-4) ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge Low incremental surge resistance, excellent clamping capability 200 W peak pulse power capability with a 10/1000 s waveform, repetition rate (duty cycle): 0.01 % Very fast response time High temperature soldering guaranteed: 260 C/10 s at terminals e3 - Sn AEC-Q101 qualified Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 61249-2-21 definiton ORDERING INFORMATION SMF5V0A-M-xx 08 = 3K per 7" reel (8 mm tape), 30K/box 18 = 10K per 13" reel (8 mm tape), 50K/box Environmental suffix -M- defines halogen-free Part number PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE SMF5V0A-M NE SMF6V5A-M NK SMF7V0A-M NM SMF7V5A-M NP SMF8V0A-M NR SMF8V5A-M NT SMF9V0A-M NV SMF10A-M NX SMF11A-M SMF12A-M SMF13A-M MOLDING COMPOUND FLAMMABILITY RATING 15 mg UL 94 V-0 MOISTURE SENSITIVITY SOLDERING CONDITIONS LEVEL NZ SMF OE MSL level 1 (according J-STD-020) 260 C/10 s at terminals OG SMF14A-M OK SMF15A-M OM SMF16A-M OP SMF17A-M OR SMF18A-M OT SMF20A-M OV SMF22A-M OX SMF24A-M OZ Rev. 1.1, 30-Nov-11 WEIGHT Document Number: 83355 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMF5V0A-M to SMF51A-M www.vishay.com Vishay Semiconductors PACKAGE DATA PACKAGE NAME DEVICE NAME TYPE CODE SMF26A-M PE SMF28A-M PG SMF30A-M PK SMF33A-M PM SMF36A-M SMF SMF40A-M PP PR SMF43A-M PT SMF45A-M PV SMF48A-M PX SMF51A-M PZ WEIGHT MOLDING COMPOUND FLAMMABILITY RATING 15 mg UL 94 V-0 MOISTURE SENSITIVITY SOLDERING CONDITIONS LEVEL MSL level 1 (according J-STD-020) 260 C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITIONS tp = 10/1000 s waveform acc. IEC 61000-4-5 Peak pulse current tp = 8/20 s waveform acc. IEC 61000-4-5 Peak pulse power tp = 10/1000 s waveform acc. IEC 61000-4-5 Peak forward surge current 8.3 ms single half sine-wave Air discharge acc. IEC 61000-4-2; 10 pulses Thermal resistance VALUE UNIT IPPM see "Electrical Characteristics" A PPP IFSM Contact discharge acc. IEC 61000-4-2; 10 pulses ESD immunity SYMBOL VESD 1000 W 200 W 20 A 30 kV 30 kV 180 K/W Mounted on epoxy glass PCB with 3 mm x 3 mm, Cu pads ( 40 m thick) RthJA IF = 12 A VF 3.5 V Junction temperature TJ - 55 to + 150 C TSTG - 55 to + 150 C Forward clamping voltage Operating temperature Storage temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PART NUMBER REVERSE BREAKDOWN VOLTAGE at IT, tp 5 ms SMF5V0A-M SMF6V0A-M REVERSE REVERSE TEST WORKING CURRENT CURRENT VOLTAGE at VRWM MAXIMUM REVERSE PEAK PULSE CLAMPING CAPACITANCE PROTECTION CURRENT VOLTAGE at VR = 0 V, PATHS tp = 10/1000 s at IPPM f = 1 MHz VBR MIN. (V) IT (mA) VRWM (V) IR (A) IPPM (A) VC (V) CD TYP. (pF) Nchannel 6.40 6.67 10 10 5 6 400 400 21.7 19.4 9.2 10.3 1030 1010 1 1 SMF6V5A-M 7.22 10 6.5 250 17.9 11.2 850 1 SMF7V0A-M 7.78 10 7 100 16.7 12 750 1 SMF7V5A-M 8.33 1 7.5 50 15.5 12.9 730 1 SMF8V0A-M 8.89 1 8 25 14.7 13.6 670 1 SMF8V5A-M 9.44 1 8.5 10 13.9 14.4 660 1 1 SMF9V0A-M 10 1 9 5 13.5 15.4 620 SMF10A-M 11.1 1 10 2.5 11.8 17 570 1 SMF11A-M 12.2 1 11 2.5 11 18.2 460 1 SMF12A-M 13.3 1 12 2.5 10.1 19.9 440 1 SMF13A-M 14.4 1 13 1 9.3 21.5 420 1 SMF14A-M 15.6 1 14 1 8.6 23.2 370 1 SMF15A-M 16.7 1 15 1 8.2 24.4 350 1 SMF16A-M 17.8 1 16 1 7.7 26 340 1 SMF17A-M 18.9 1 17 1 7.2 27.6 310 1 SMF18A-M 20 1 18 1 5.8 29.2 305 1 Rev. 1.1, 30-Nov-11 Document Number: 83355 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMF5V0A-M to SMF51A-M www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) REVERSE BREAKDOWN VOLTAGE at IT, tp 5 ms PART NUMBER REVERSE REVERSE TEST WORKING CURRENT CURRENT VOLTAGE at VRWM MAXIMUM REVERSE PEAK PULSE CLAMPING CAPACITANCE PROTECTION CURRENT VOLTAGE at VR = 0 V, PATHS tp = 10/1000 s at IPPM f = 1 MHz VBR MIN. (V) IT (mA) VRWM (V) IR (A) IPPM (A) VC (V) CD TYP. (pF) Nchannel SMF20A-M 22.2 1 20 1 6.2 32.4 207 1 SMF22A-M 24.4 1 22 1 5.6 35.5 265 1 SMF24A-M 26.7 1 24 1 5.1 38.9 240 1 SMF26A-M 28.9 1 26 1 4.8 42.1 225 1 SMF28A-M 31.1 1 28 1 4.4 45.4 210 1 SMF30A-M 33.3 1 30 1 4.1 48.4 205 1 SMF33A-M 36.7 1 33 1 3.8 53.3 190 1 SMF36A-M 40 1 36 1 3.4 58.1 180 1 SMF40A-M 44.4 1 40 1 3.1 64.5 165 1 SMF43A-M 47.8 1 43 1 2.9 69.4 160 1 SMF45A-M 50 1 45 1 2.8 72.7 155 1 SMF48A-M 53.3 1 48 1 2.6 77.4 150 1 SMF51A-M 56.7 1 51 1 2.4 82.4 145 1 TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 150 PPP - Peak Pulse Power (kW) Non-repetitive pulse waveform shown in fig. 3 TA = 25 C 1 IPPM - Peak Pulse Current, % IRSM 10 tr =10 s 17250 Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage (%) Fig. 1 - Peak Pulse Power Rating Peak value IPPM 100 Half value IPPM IPPM 2 50 0.1 0.1 s 1.0 s 10 s 100 s 1.0 ms 10 ms td - Pulse Width (s) TJ = 25 C pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM 0 0 17252 10/100 s waveform as defined by R.E.A. td 1 2 3 4 t - Time (ms) Fig. 3 - Pulse Waveform 100 75 50 25 0 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature 17251 Fig. 2 - Pulse Derating Curve Rev. 1.1, 30-Nov-11 Document Number: 83355 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMF5V0A-M to SMF51A-M www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SMF 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 1.7 (0.067) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 1.1, 30-Nov-11 Document Number: 83355 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMF5V0A-M to SMF51A-M www.vishay.com Vishay Semiconductors BLISTERTAPE DIMENSIONS in millimeters (inches) PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 1.1, 30-Nov-11 Document Number: 83355 5 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMF5V0A-M to SMF51A-M www.vishay.com Vishay Semiconductors Pin 1 - Location LLP1713 Top view Pad layout - view from top seen at bottom side Pin 1 - Location LLP2513 Top view Pad layout - view from top seen at bottom side Pin 1 - Location LLP3313 Top view Rev. 1.1, 30-Nov-11 Pad layout - view from top seen at bottom side Document Number: 83355 6 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000