Communication Markets Division 3M Fiber Connectors 3M Communications. Bringing the world's networks together. Headquartered in Austin, Texas, 3M's Communication Markets Division creates technology that makes the world a smaller place. From fiber to passive optical LAN to wireless solutions, we're helping increase the speed of connections, while making sure networks stay up and running around the clock and around the globe. The world's growing digital economy moves at the speed of information. 3MTM Fiber Interconnect Solutions help our customers take the lead with scalable options to help optimize speed, size and interconnectivity for growing networks. Rely on 3M expertise to help optimize existing network infrastructure and lay the foundation for future evolutions. For more information about 3M Communications visit 3M.com/Telecom. 2 3MTM Fiber Interconnect Solutions We're helping deliver the fastest fiber connections to homes, universities, hospitals, businesses and more. From ferruled fiber connectors and adapters, to mechanical splices, cable assemblies and accessories, our products are designed to meet increasing demand for speed and reliability. Table of Contents 3MTM Field Installable Connectors 3M CrimplokTM+ Connectors................................................................................................................................5 3M No Polish Connectors (NPC)...................................................................................................................... 8 3M Easy Cleaver.................................................................................................................................................. 14 3M Hot Melt Connectors................................................................................................................................... 17 3M CrimplokTM Connectors..................................................................................................................................19 3M Epoxy Connectors.........................................................................................................................................20 3MTM Termination Kits 3M Crimplok+ Connector Kits........................................................................................................................... 21 3M No Polish Connector Kits.............................................................................................................................22 3M Hot Melt Termination Kits........................................................................................................................... 23 3M Crimplok Termination Kit.............................................................................................................................25 3M Epoxy Termination Tools.............................................................................................................................. 26 3MTM FibrlokTM Optical Splice System 3M Fibrlok Splices................................................................................................................................................27 3M Fibrlok Splice Kits..........................................................................................................................................29 3 3MTM Field Installable Connectors Reliability and a craft-friendly installations make 3M field installable connectors popular among contractors and industry professionals. 3M connectors can help maximize time in the field with factory-prepped shortcuts and high performance tools. Choose from a full line of fiber connectors with ceramic ferrules. 3MTM Fiber Connectors Fiber Connector Selection Charts 3M Connector LC SC ST 250/900 m Jacketed 250/900 m Jacketed l l No Polish l l l l l Hot Melt l l CrimplokTM+ 250/900 m FC Jacketed 250/900 m Jacketed l l l l l l l l Crimplok l l l l Epoxy l l l l 4 3MTM Crimplok TM+ Connectors 3MTM CrimplokTM+ Connectors provide fast, easy field termination of 250 m and 900 m singlemode and multimode fiber and 1.6 to 3.0 mm jacketed cable without a splice, gel or adhesive. The connectors are SC compatible with a metallic element that mechanically locks the fiber in place. To terminate, the fiber is cleaved, inserted through the connector and locked in place using the 3MTM CrimplokTM+ Activation Tool and the fiber tip polished with the 3MTM CrimplokTM+ Nano Finishing Tool. This hand tool utilizes a polishing film and an orbital mechanism that polishes with a single turn of the handle. Once completed, the connector is cleaned and ready for use. The Crimplok+ Connectors and Tools are RoHS compliant.* 3MTM CrimplokTM+ 250m/900m Connector Family Crimplok+ connectors have a thermally balanced design that is tested for premises and FTTP applications for indoor and outdoor conditions. Features and Benefits 3MTM CrimplokTM+ Connectors No splice, gel or adhesive No splice interface/potential optical loss point Simple assembly tools Fast, easy installation without electrical power Angle nano finishing tool for SC/APC connectors Helps eliminate high CapEx of angle cleaver Polishing film with every connector Always have new polishing film Field termination Always the right cable length with virtually no cable slack to store 3MTM CrimplokTM+ Singlemode Jacketed Connectors 3MTM CrimplokTM+ Activation Tool, a Singlemode SC APC 250/900um connector and a lapping film 5 3MTM CrimplokTM+ Connector 250m/900m SC Series Specifications Multimode Singlemode Product Number 6700-AT/62.5 6700-AT/50 6700 AT/-50LOMFF 8700-AT/UPC 8700-AT/APC Connector identification Beige/White Black/White Aqua/White Blue/White Green/White Insertion loss (dB) Typical 0.2 0.2 0.2 0.2 0.25 Reflectance (dB) Typical at room temp <-25 <-30 <-30 <-40 <-65 Reflectance (dB) Over operating temperature range <-25 <-30 <-30 <-35 <-60 Operating temperature range -10C to 60C -10C to 60C -10C to 60C -40C to 75C -40C to 75C Storage temperature -10C to 60C -10C to 60C -10C to 60C -40C to 85C -40C to 85C Zirconia ceramic Engineered resin Zirconia ceramic Engineered resin Zirconia ceramic Engineered resin Zirconia ceramic Engineered resin Zirconia ceramic Engineered resin Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Installation tool 8765-AT/UPC 8765-AT/UPC 8765-AT/UPC 8765-AT/UPC 8765-AT/APC Nano finishing tool 8765-NF/UPC 8765-NF/UPC 8765-NF/UPC 8765-NF/UPC 8765-NF/APC Field termination kit 8765T-UPC 8765T-UPC 8765T-UPC 8765T-UPC 8765T-APC Material Connector ferrule Connector housing and body Boot 3MTM CrimplokTM+ Jacketed Connector Specifications Singlemode Product Number 8702/UPC/1.6-3 8702/APC/1.6-3 Connector identification Blue/White Green/White Insertion loss (dB) Typical 0.2 0.3 Reflectance (dB) Typical at room temp <-40 <-65 Reflectance (dB) Over operating temperature range <-35 <-60 Operating temperature range -10C to 60C -10C to 60C Storage temperature -10C to 60C -10C to 60C Zirconia ceramic Engineered resin Zirconia ceramic Engineered resin Thermoplastic elastomer Thermoplastic elastomer Installation tool 8765-PS/UPC/JT 8765-PS/APC/JT Nano finishing tool 8765-NF/UPC 8765-NF/APC Field termination kit 8765T-UPC/250-900-JKT 8765T-APC/250-900-JKT Material Connector ferrule Connector housing and body Boot 6 3MTM CrimplokTM+ Connector Ordering Information Product Number Description Packaging Min. Order 3M ID 8700-AT/UPC Crimplok+ Connector SC/UPC SM 250/900 m with Activation Tool 60/package 60 each 80-6116-2208-7 8700-AT/APC Crimplok+ Connector SC/APC SM 250/900 m with Activation Tool 60/package 60 each 80-6116-2200-4 6700-AT/62.5 Crimplok+ Connector SC MM 62.5 m (OM1) 250/900 m with Activation Tool 60/package 60 each 80-6116-2211-1 6700-AT/50 Crimplok+ Connector SC MM 50 m (OM2) 250/900 m with Activation Tool 60/package 60 each 80-6116-2209-5 6700-AT/50LOMMF Crimplok+ Connector SC MM 50 m LOMMF (OM3/4) 250/900 m with Activation Tool 60/package 60 each 80-6116-2210-3 3MTM CrimplokTM+ Jacketed Connector Ordering Information Product Number Description Packaging Min. Order 3M ID 8702/UPC/1.6-3 3MTM CrimplokTM+ SC/UPC Jacketed Connector 60/package 60 each 80-6114-9633-4 8702/APC/1.6-3 3M Crimplok SC/APC Jacketed Connector 60/package 60 each 80-6114-9632-6 8765-PS/UPC/JT Protrusion Setting Tool with fiber holder for jacketed SC/UPC connector 1/package 1 each 80-6114-9642-5 8765-PS/APC/JT Protrusion Setting Tool with fiber holder for jacketed SC/APC connector 1/package 1 each 80-6114-9643-3 8765-UPC/ADD Protrusion Setting Tool SC/UPC with fiber holder and two jacket slitting tools 1/package 1 each 80-6115-9646-6 8765-APC/ADD Protrusion Setting Tool SC/APC with fiber folder and two jacket slitting tools 1/package 1 each 80-6114-9647-5 TM TM 7 3MTM No Polish Connectors (NPC) 3M No Polish Connectors help enable fast, on-site installation of 250 m and 900 m singlemode and multimode fiber and 1.6 to 3.0 mm jacketed cable. With a factory-polished ferrule assembly and a mechanical splice, the connector can be quickly installed -- without electrical power -- using a simple field tool that is included in every box of 60 connectors (when required). For excellent mechanical performance, the 3M NPC has internal gripping elements for the strain relief of the fiber. The 250/900 m SC and LC 3M NPCs utilize a one-piece, pre-assembled design that eliminates field polishing and loose parts. The SC and LC 3M NPCs for jacketed cable can be installed without an assembly tool. A twist-on boot clamps onto the cable jacket and aramid fiber to provide excellent strain relief. The SC/APC and LC/APC compatible 3M NPC are available with a standard, flat splice configuration or with a keyed, angle splice for excellent back reflection. To maximize installation yield, the splice in the connector can be opened and re-terminated with a cap lifter. The assembly tool and cap lifter are included in every box of 60 connectors (when required). Features and Benefits 3MTM No Polish Connectors Field termination Right cable length with no cable slack to store Simple assembly tool Fast, easy installation 250/900 m Connectors and Jacketed connectors available Potentially improve supply chain and inventory management Factory-polished fiber stub in ferrule No on-site polish or adhesives required Keyed, angle cleave splice for APC Low reflectance, <-60 dB across temperature extremes 3MTM No Polish SC Connector Ordering Information Product Number Description 3M ID Packaging Min. Order (connectors Connector per box) 8800-APC/FS/C SM No Polish SC/APC Connector flat splice with Easy Cleaver SM No Polish SC/UPC Connector with Easy Cleaver SM No Polish SC/UPC Connector 1.6-3.0 mm Jacket with Easy Cleaver SM No Polish SC/APC Connector 1.6-3.0 mm Jacket flat splice with Easy Cleaver MM No Polish SC Connector 50 m with Easy Cleaver MM No Polish SC Connector 50 m laser optimized with Easy Cleaver MM No Polish SC Connector 62.5 m with Easy Cleaver MM No Polish SC/UPC Connector 50 m 1.6-3.0 mm Jacket with Easy Cleaver MM No Polish SC/UPC Connector 50 m LOMMF 1.6-3.0 mm Jacket with Easy Cleaver MM No Polish SC/UPC Connector 62.5 m 1.6-3.0 mm Jacket with Easy Cleaver 80-6114-9412-3 120 120 2 sets 1 unit 80-6114-9411-5 120 120 2 sets 1 unit 80-6114-8225-0 120 120 1 unit 80-6114-8226-8 120 120 not needed not needed 80-6114-9419-8 60 60 1 set 1 unit 80-6114-9420-6 60 60 1 set 1 unit 80-6114-9421-4 60 60 1 set 1 unit 80-6114-9422-2 60 60 not needed 1 unit 80-6114-9423-0 60 60 not needed 1 unit 80-6114-9424-8 60 60 not needed 1 unit 8800/C 8802-T/1.6-3/C 8802-T/APC/FS/1.6-3/C 6800-50/C_60 6800-50LOMMF/C_60 6800-62.5/C_60 6802-T/50/1.6-3/C_60 6802-T/50LOMMF/ 1.6-3/C_60 6802-T/62.5/1.6-3/C_60 8 Assemby Tools incl. Easy Cleaver incl. 1 unit 3MTM No Polish SC Connector Family 3MTM No Polish SC Connector Specifications Multimode Singlemode Connector Type SC SC SC SC SC/APC SC/APC Product Number 6800-50 6800-50LOMMF 6800-62.5 8800 8800-APC/FS 8800-APC/AS Connector identification Backbone color Shell color Housing color Black Black White Black Aqua White Black Beige White Black Blue White Black Green White Black Green Green Cable jacket size (mm) 1.6, 2.0, 3.0 1.6, 2.0, 3.0 1.6, 2.0, 3.0 1.6, 2.0, 3.0 1.6, 2.0, 3.0 1.6, 2.0, 3.0 Fiber type 50 m MM (OM2) 50 m LOMMF (OM3/4) 62.5 m MM (OM1) SM SM SM Cleave Flat Flat Flat Flat Flat Angle Assembly tool 8865-AT 8865-AT 8865-AT 8865-AT 8865-AT 8865-AT Insertion loss (dB) Typical 0.2 0.2 0.2 0.3 0.3 0.3 Reflectance (dB) Typical at room temp <-30 <-30 <-25 <-40 <-55 <-65 Reflectance (dB) Over operating temperature range <-30 <-30 <-25 <-35 <-35 <-60 Operating temperature range -10 to 60C -10C to 60C -10C to 60C -40C to 75C -40C to 75C -40C to 75C Storage temperature -40C to 85C -40C to 85C -40C to 85C -40C to 85C -40C to 85C -40C to 85C Material Connector ferrule Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Connector housing and body Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Boot Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 2565 Field termination kit (no power needed) 9 3MTM No Polish Jacketed SC/UPC Connector Family 3MTM No Polish Connector SC/UPC Jacket Specifications Multimode Singlemode Product Number 6802-T/50/1.6-3 6802-T/50/LOMMF/1.6-3 8802-T/62.5/1.6-3 8802-T/1.6-3 Connector identification Backbone color Shell color Housing color Black Black White Black Aqua White Black Beige White Black Blue White Cable jacket size Housing color 1.6, 2.0, 3.0 1.6, 2.0, 3.0 1.6, 2.0, 3.0 1.6, 2.0, 3.0 Insertion Loss (dB) Typical 0.2 0.2 0.2 0.3 Reflectance (dB) Typical at room temp <-30 <-30 <-25 <-40 Reflectance (dB) Over operating temperature range <-30 <-30 <-25 <-35 Operating temperature range -10C to 60C -10C to 60C -10C to 60C -40C to 75C Storage temperature -40C to 85C -40C to 85C -40C to 85C -40C to 85C Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR Material Connector ferrule Connector housing and body Boot Field termination kit (optional) 3MTM No Polish Connector SC/UPC Jacket Ordering Information Product Number Description Packaging Min. Order 3M ID 6802-T/50/1.6-3 No Polish SC/UPC Connector MM 50 m 1.6-3.0 mm Jacket 60/package 60 each 80-6113-9828-2 6802-T/50/ LOMMF/1.6-3 No Polish SC/UPC Connector MM 50 m LOMMF 1.6-3.0 mm Jacket 60/package 60 each 80-6113-9829-0 6802-T/62.5/1.6-3 No Polish SC/UPC Connector MM 62.5 m 1.6-3.0 mm Jacket 60/package 60 each 80-6113-9830-8 8802-T/1.6-3 No Polish SC/UPC Connector SM 1.6-3.0 mm Jacket 60/package 60 each 80-6113-3507-8 10 3MTM No Polish SC/APC Connector Flat and Angle Splice 1.6-3 mm Jacket 3MTM No Polish Jacketed SC/APC Connector Specifications Singlemode Product Number 8802-T/APC/AS/1.6-3 8802-T/APC/FS/1.6-3 Connector identification Backbone color Shell color Housing color Green Green White Black Green White Cable jacket size (mm) 1.6, 2.0, 3.0 1.6, 2.0, 3.0 Insertion Loss (dB) Typical 0.3 0.3 Reflectance (dB) Typical at room temp <-65 <-55 Reflectance (dB) Over operating temperature range <-60 <-35 Operating temperature range -40C to 75C -40C to 75C Storage temperature -40C to 85C -40C to 85C Connector identification Green/Green Green/Black Field termination kit 2565 (required) 8865-C or 8865-C/PR (optional) 3MTM No Polish Jacketed SC/APC Connector Ordering Information Product Number Description Packaging Min. Order 3M ID 8802-T/APC/AS/1.6-3 No Polish SC/APC Connector Angle Splice 1.6-3 mm Jacket 60/package 60 each 80-6113-3505-2 8802-T/APC/FS/1.6-3 No Polish SC/APC Connector Flat Splice 1.6-3 mm Jacket 60/package 60 each 80-6113-3509-4 11 3MTM No Polish LC Connector Specifications Multimode Singlemode Connector Type LC LC LC LC LC/APC LC/APC Product Number 6830-50 6830-50LOMMF 6830-62.5 8830 8830-APC/FS 8830-APC/AS Applications Data Data Data Data, IPTV Data, IPTV Data, IPTV, Analog TV Connector identification Backbone color Shell color Housing color Black Black White Black Aqua White Black Beige White Black Blue White Black Green White Black Green Green Fiber type 50 m MM (OM2) 50 m LOMMF (OM3/4) 62.5 m MM (OM 1) SM SM SM Cleave Flat Flat Flat Flat Flat Angle Assembly tool 8835-AT 8835-AT 8835-AT 8835-AT 8835-AT 8835-AT Insertion loss (dB) Typical 0.2 0.2 0.2 0.3 0.3 0.3 Reflectance (dB) Typical at room temp <-30 <-30 <-25 <-40 <-55 <-65 Reflectance (dB) Over operating temperature range <-30 <-30 <-25 <-35 <-35 <-60 Operating temperature range -10C to 60C -10C to 60C -10C to 60C -40C to 75C -40C to 75C -40C to 75C Storage temperature -40C to 85C -40C to 85C -40C to 85C -40C to 85C -40C to 85C -40C to 85C Material Connector ferrule Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Connector housing and body Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Boot Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 2565 Field termination kit (no power needed) 12 3MTM No Polish LC Connector Family 3MTM No Polish LC Connector Ordering Information Product Number Description 3M ID Packaging Min. Order (connectors Connector per box) 8830-APC/FS/C SM No Polish LC/APC Connector flat splice with Easy Cleaver SM No Polish LC/UPC Connector with Easy Cleaver SM No Polish LC/UPC Connector 1.6-2.0 mm Jacket with Easy Cleaver MM No Polish LC Connector 50 m with Easy Cleaver MM No Polish LC Connector 50 m laser optimized with Easy Cleaver MM No Polish LC Connector 62.5 m with Easy Cleaver MM No Polish LC/UPC Connector 50 m 1.6-2.0 mm Jacket with Easy Cleaver MM No Polish LC/UPC Connector 50 m LOMMF 1.6-2.0 mm Jacket with Easy Cleaver MM No Polish LC/UPC Connector 62.5 m 1.6-2.0 mm Jacket with Easy Cleaver 80-6114-9416-4 120 120 2 sets 1 unit 80-6114-9415-6 120 120 2 sets 1 unit 80-6114-9417-2 120 120 1 unit 80-6114-9425-5 60 60 not needed 1 set 80-6114-9426-3 60 60 1 set 1 unit 80-6114-9427-1 60 60 1 set 1 unit 80-6114-9428-9 60 60 not needed 1 unit 80-6114-9429-7 60 60 not needed 1 unit 80-6114-9430-5 60 60 not needed 1 unit 8830/C 8832-T/1.6-2/C 6830-50/C_60 6830-50LOMMF/C_60 6830-62.5/C_60 6832-T/50/1.6-2/C_60 6832-T/50LOMMF/ 1.6-2/C_60 6832-T/62.5/1.6-2/C_60 Assemby Tools incl. Easy Cleaver incl. 1 unit 13 3MTM No Polish Connector LC/UPC Jacket Specifications Multimode Singlemode Product Number 6832-T/50/1.6-2 6832-T/50/LOMMF/1.6-2 6832-T/62.5/1.6-2 8832-T/1.6-2 Connector identification Backbone color Shell color Housing color Black Black White Black Aqua White Black Black White Black Blue White Cable jacket size (mm) 1.6, 2.0 1.6, 2.0 1.6, 2.0 1.6, 2.0 Insertion loss (dB) Typical 0.2 0.2 0.2 0.3 Reflectance (dB) Typical at room temp <-30 <-30 <-25 <-35 Reflectance (dB) Over operating temperature range <-30 <-30 <-25 <-40 Operating temperature range -10C to 60C -10C to 60C -10C to 60C -10C to 60C Storage temperature -10C to 60C -10C to 60C -10C to 60C -10C to 60C Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR Material Connector ferrule Connector housing and body Boot Field termination kit 3MTM No Polish Connector LC/UPC Jacket Ordering Information Product Number Description Packaging Min. Order 3M ID 8832-T/1.6-2 No Polish LC/UPC Connector SM 50 m 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9839-9 6832-T/50/1.6-2 No Polish LC/UPC Connector MM 50 m 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9840-7 6832-T/50/ LOMMF/1.6-2 No Polish LC/UPC Connector MM 50 m LOMMF 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9841-5 6832-T/62.5/1.6-2 No Polish LC/UPC Connector MM 62.5 m 1.6-2.0 mm Jacket 60/package 60 each 80-6113-9842-3 14 3MTM No Polish ST Connector Family 3M No Polish ST Connector Specifications TM Multimode Singlemode Product Number 6840-50 6840-50/LOMMF 6840-62.5 8840 Connector identification Backbone color Shell color Housing color Black Black White Black Aqua White Black Beige White Black Blue White Insertion loss (dB) Typical 0.2 0.2 0.2 0.3 Reflectance (dB) Typical at room temp <-30 <-30 <-25 <-40 Reflectance (dB) Over operating temperature range <-30 <-30 <-25 <-35 Operating temperature range -10C to 60C -10C to 60C -10C to 60C -10C to 60C Storage temperature -10C to 60C -10C to 60C -10C to 60C -10C to 60C Connector identification Housing Boot Black White Aqua White Beige White Blue White Material Connector ferrule Connector housing and body Boot Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Engineered resin Engineered resin Engineered resin Engineered resin Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Field Termination Kit 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 3MTM No Polish ST Connector Ordering Information Product Number Description Packaging Min. Order 3M ID 6840-50 No Polish ST Connector MM 50 m, 250/900 buffer, 60 pack (black housing) with assembly tool 60/package 60 each 80-6113-9511-4 6840-50/12 No Polish ST Connector MM 50 m, 250/900 buffer, 12 pack (black housing) 12/package 12 each 80-6113-9514-8 6840-50/LOMMF No Polish ST Connector MM 50 m LO, 250/900 buffer, 60 pack (aqua housing) with assembly tool 60/package 60 each 80-6113-9512-2 6840-50/LOMMF/12 No Polish ST Connector MM 50 m LO, 250/900 buffer, 12 pack (aqua housing) 12/package 12 each 80-6113-9515-5 6840-62.5 No Polish ST Connector MM 62.5 m, 250/900 buffer, 60 pack (beige housing) with assembly tool 60/package 60 each 80-6113-9513-0 6840-62.5/12 No Polish ST Connector MM 62.5 m, 250/900 buffer, 12 pack (beige housing) 12/package 12 each 80-6113-9516-3 8840 No Polish ST Connector SM, 250/900 buffer, 60 pack (blue housing) with assembly tool 60/package 60 each 80-6113-9517-1 8840/12 No Polish ST Connector SM, 250/900 buffer, 12 pack (blue housing) 12/package 12 each 80-6113-9518-9 8845-AT No Polish ST Connector Assembly Tool 1 each 1 each 80-6113-9519-7 15 3MTM Easy Cleaver Combo Available in select packages of connectors and splices, the 3MTM Easy Cleaver is the latest cleaving innovation from 3M. The 3M Easy Cleaver is designed to simplify installations and lower capital expenditure when terminating all 3M flat-cleave, field-installable connectors and splices. Unlike other blade-enabled fiber cleaving tools, the 3M Easy Cleaver requires no maintenance because of its diamond wire cleaving mechanism. Use it to create smooth end-faces repeatedly - each tool performs up to 120 cleaves. See the ordering chart for specific details on packaging. 3MTM Easy Cleaver Features and Benefits 3MTM Easy Cleaver Life cycle counter Conveniently helps users to keep track of cleaver life Diamond wire shuttle Virtually no maintenance or blade rotation required, which can help reduce downtime Innovative fiber clamp design Provides precise and repeatable cleaves Strip and cleave length markings Clear indication of specified strip lengths for 3M connector and splice installations Lightweight and durable Suitable for both indoor and outdoor work environments 3MTM Easy Cleaver Specifications Feature Dimensions 133 x 68 x 29.5 mm (5.24 x 2.68 x 1.16 in) approx. Weight 62 gm (2.2 oz) approx. Compatible fibers Buffered Jacketed Cable Drop Cable 250 m / 900 m tight buffer Up to 3 mm 1.6 x 2 mm and 2 x 3 mm FRP Perpendicular Cleave <3 typical Cleave lengths 8 - 24 mm (Specific cleave length markings are 8, 10, 12.5, 19, 20 and 24 mm) Strip lengths 42 - 58 mm Cleaver life Approximately 120 cleaves* Performance Flat cleave: 3M field-installable connectors and splices perform to their individual specifications when terminated with the 3MTM Easy Cleaver if the 3M Easy Cleaver is used per 3M instructions. *Once 120 cleaves are performed, properly dispose of the cleaver per company practice. Cleave Length Guide 3M Products Cleave Length (mm) Fiber Strip length (mm) 3MTM No Polish Connectors 8 42 3M Fibrlok II Splices 12.5 46 3MTM CrimplokTM+ 250 m Connectors 19 52 3M Crimplok + 900 m Connectors 24 58 TM TM 16 TM TM 3MTM Easy Cleaver Ordering Information Product No. Description 3M ID Packaging Min. Order (connectors Connector per box) Assemby Tools incl. Easy Cleaver incl. 80-6114-9412-3 120 120 2 sets 1 unit 80-6114-9411-5 120 120 2 sets 1 unit 80-6114-8225-0 120 120 1 unit 80-6114-8226-8 120 120 not needed not needed 80-6114-9419-8 60 60 1 set 1 unit 80-6114-9420-6 60 60 1 set 1 unit 80-6114-9421-4 60 60 1 set 1 unit 80-6114-9422-2 60 60 not needed 1 unit 80-6114-9423-0 60 60 not needed 1 unit 80-6114-9424-8 60 60 not needed 1 unit 80-6114-9416-4 120 120 2 sets 1 unit 80-6114-9415-6 120 120 2 sets 1 unit 80-6114-9417-2 120 120 1 unit 80-6114-9425-5 60 60 not needed 1 set 80-6114-9426-3 60 60 1 set 1 unit 80-6114-9427-1 60 60 1 set 1 unit 80-6114-9428-9 60 60 not needed 1 unit 80-6114-9429-7 60 60 not needed 1 unit 80-6114-9430-5 60 60 not needed 1 unit 3MTM No Polish Connectors SC Connector Type 8800-APC/FS/C 8800/C 8802-T/1.6-3/C 8802-T/APC/FS/1.6-3/C 6800-50/C_60 6800-50LOMMF/C_60 6800-62.5/C_60 6802-T/50/1.6-3/C_60 6802-T/50LOMMF/ 1.6-3/C_60 6802-T/62.5/1.6-3/C_60 SM No Polish SC/APC Connector flat splice with Easy Cleaver SM No Polish SC/UPC Connector with Easy Cleaver SM No Polish SC/UPC Connector 1.6-3.0 mm Jacket with Easy Cleaver SM No Polish SC/APC Connector 1.6-3.0 mm Jacket flat splice with Easy Cleaver MM No Polish SC Connector 50 m with Easy Cleaver MM No Polish SC Connector 50 m laser optimized with Easy Cleaver MM No Polish SC Connector 62.5 m with Easy Cleaver MM No Polish SC/UPC Connector 50 m 1.6-3.0 mm Jacket with Easy Cleaver MM No Polish SC/UPC Connector 50 m LOMMF 1.6-3.0 mm Jacket with Easy Cleaver MM No Polish SC/UPC Connector 62.5 m 1.6-3.0 mm Jacket with Easy Cleaver 1 unit LC Connector Type 8830-APC/FS/C 8830/C 8832-T/1.6-2/C 6830-50/C_60 6830-50LOMMF/C_60 6830-62.5/C_60 6832-T/50/1.6-2/C_60 6832-T/50LOMMF/ 1.6-2/C_60 6832-T/62.5/1.6-2/C_60 SM No Polish LC/APC Connector flat splice with Easy Cleaver SM No Polish LC/UPC Connector with Easy Cleaver SM No Polish LC/UPC Connector 1.6-2.0 mm Jacket with Easy Cleaver MM No Polish LC Connector 50 m with Easy Cleaver MM No Polish LC Connector 50 m laser optimized with Easy Cleaver MM No Polish LC Connector 62.5 m with Easy Cleaver MM No Polish LC/UPC Connector 50 m 1.6-2.0 mm Jacket with Easy Cleaver MM No Polish LC/UPC Connector 50 m LOMMF 1.6-2.0 mm Jacket with Easy Cleaver MM No Polish LC/UPC Connector 62.5 m 1.6-2.0 mm Jacket with Easy Cleaver 1 unit 17 3MTM Easy Cleaver Ordering Information (continued) Product No. Description 3M ID Packaging Assemby Min. Order (connectors Tools Connector per box) incl. Easy Cleaver incl. SM No Polish ST Connector 250/900 m buffer and Easy Cleaver MM No Polish ST Connector 50 m, 250/900 m buffer and Easy Cleaver MM No Polish ST Connector 50 m LO, 250/900 m buffer and Easy Cleaver MM No Polish ST Connector 62.5 m, 250/900 m buffer and Easy Cleaver 80-6114-9418-0 120 120 2 sets 1 unit 80-6114-9431-3 60 60 1 set 1 unit 80-6114-9432-1 60 60 1 set 1 unit 80-6114-9433-9 60 60 1 set 1 unit 3M Crimplok+ Connector SC/APC SM 250/900 m and Easy Cleaver 3M Crimplok+ Connector SC/UPC SM 250/900 m and Easy Cleaver 3M Crimplok+ Connector SC MM 62.5 m (OM1) 250/900 m and Easy Cleaver 3M Crimplok+ Connector SC MM 50 m (OM2) 250/900 m and Easy Cleaver 3M Crimplok+ Connector SC MM 50 m LOMMF (OM3/4) 50/900 m and Easy Cleaver 80-6116-2233-5 120 120 2 sets 1 unit 80-6116-2234-3 120 120 2 sets 1 unit 80-6116-2241-8 60 60 1 set 1 unit 80-6116-2240-0 60 60 1 set 1 unit 80-6116-2242-6 60 60 1 set 1 unit 80-6114-9439-6 60 60 none 1 unit ST Connector Type 8840/C 6840-50/C_60 6840-50LOMMF/C_60 6840-62.5/C_60 3MTM CrimplokTM+ Connectors 8700-AT/APC/C 8700-AT/UPC/C 6700-AT/62.5/C-60 6700-AT/50/C-60 6700-AT/50LOMMF/C-60 3MTM FibrlokTM II Universal Optical Fiber Splice 2529/C_60 18 3M Fibrlok II Universal Optical Fiber Splice for 250/900 m fiber with Easy Cleaver 3MTM Hot Melt Connectors 3MTM Hot Melt Connectors come pre-loaded with advanced 3M hot melt adhesive. There is no need for epoxy mixing and application so the termination time averages just two minutes. The 3M hot melt connector's reliability, high performance and ease of use, in both indoor and outdoor LANs worldwide, have made it an industry favorite. 3MTM Hot Melt SC Connector The 3M Hot Melt LC Connector in both singlemode and multimode has all the advantages of our pre-loaded hot melt technology -- and at half the size of our SC connector. 3MTM Hot Melt LC Connector Features and Benefits 3MTM Hot Melt LC, SC, ST and FC Connectors Pre-loaded hot melt adhesive xtended shelf life as compared to epoxy versions; fewer consumables (cost effective); E no epoxy to mix; no syringe needed; shorter set-up time; no mess; no waste No waiting for epoxy to cure ermination in approximately two minutes increases productivity; short heat and cool T cycle; saves time Single-step polish for multimode Only one abrasive to buy; faster polishing (cost effective) Extended adhesive shelf life Reduces outdated epoxy inventory and stock rotation requirements Pre-radiused PC ferrule Designed to provide contact of fibers; consistent performance 3M Hot Melt Connector Specifications Multimode Singlemode Connector Type ST FC SC LC ST SC LC Product Family 6100 6200 6300 6600 8100YS 8300 8600 Insertion loss (dB) Typical 0.2 0.2 0.2 0.2 0.2 0.2 0.2 Reflectance (dB) Typical <-25 <-25 <-25 <-25 <-40 <-40 <-40 Operating temperature range -10 to 60C -10 to 60C -10 to 60C -10 to 60C -10 to 60C -10 to 60C -10 to 60C Storage temperature -10 to 60C -10 to 60C -10 to 60C -10 to 60C -10 to 60C -10 to 60C -10 to 60C Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Connector housing and body Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Engineered resin Boot Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer 6366 6362 6366 6362 6366 6362 + 6366 6362 6366 6362 + Material Connector ferrule Field termination kit 120 V 220 V + LC hot melt connectors require the 6650-LC expansion kit plus either the 6366 or 6362 19 3M Hot Melt Connector Ordering Information Product Number Description Packaging Min. Order 3M ID 6100-B MM Hot Melt ST ceramic, black boot 1/bag, 60/carton 60 each 80-6111-2754-1 6100-R MM Hot Melt ST ceramic, red boot 1/bag, 60/carton 60 each 80-6111-2755-8 6100-W MM Hot Melt ST ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2753-3 6200 MM Hot Melt FC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2758-2 6300-W MM Hot Melt SC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2757-4 6600-S MM Hot Melt LC simplex 900 BTW white boot 1/bag, 60/carton 60 each 80-6113-1429-7 6602-S MM Hot Melt LC simplex 1.6-2.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1349-7 6603-S MM Hot Melt LC simplex 2.4-3.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1430-5 6601-D MM Hot Melt LC duplex 900 buffer white/beige boots 1/bag, 60/carton 60 each 80-6113-1431-3 6602-D MM Hot Melt LC duplex 1.6-2.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1350-5 6603-D MM Hot Melt LC duplex 2.4-3.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1432-1 6604-D MM Hot Melt LC duplex 900 buffer red/black boots 1/bag, 60/carton 60 each 80-6113-1433-9 6605-D MM Hot Melt LC duplex 1.6-2.0 cable red/black boots 1/bag, 60/carton 60 each 80-6113-1434-7 6606-D MM Hot Melt LC duplex 2.4-3.0 cable red/black boots 1/bag, 60/carton 60 each 80-6113-1435-4 8100-YS SM Hot Melt ST ceramic, yellow boot 1/bag, 60/carton 60 each 80-6111-2762-4 8200-W SM Hot Melt FC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-7612-6 8300 SM Hot Melt SC ceramic, white boot 1/bag, 60/carton 60 each 80-6111-2765-7 8600-S SM Hot Melt LC simplex 900 BTW white boot 1/bag, 60/carton 60 each 80-6113-1436-2 8602-S SM Hot Melt LC simplex 1.6-2.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1351-3 8603-S SM Hot Melt LC simplex 2.4-3.0 cable white boot 1/bag, 60/carton 60 each 80-6113-1437-0 8601-D SM Hot Melt LC duplex 900 buffer white/beige boots 1/bag, 60/carton 60 each 80-6113-1438-8 8602-D SM Hot Melt LC duplex 1.6-2.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1352-1 8603-D SM Hot Melt LC duplex 2.4-3.0 cable white/beige boots 1/bag, 60/carton 60 each 80-6113-1439-6 Note: MM - Multimode; SM - Singlemode 20 3MTM CrimplokTM Connectors 3MTM CrimplokTM Connectors need no adhesive, providing the speed of non-adhesive connectors with the optical performance of 3MTM Hot Melt Connectors. By using proven malleable metal element fiber-gripping technology, these connectors are designed to be easily installed virtually anywhere without the need for electrical power. 3MTM CrimplokTM ST Connector Features and Benefits 3MTM CrimplokTM Connectors Non-adhesive, non-splice design Clean and simple terminations No tool set-up required Improved efficiency No waiting for epoxy to cure Termination in less than one minute with fully prepared fiber No power or electricity required Installation practically anywhere 3M Crimplok Connector Specifications Multimode Singlemode Connector Type SC ST SC ST Product Number 6900 6901 8900 8901 Connector identification Body color Shell color Boot color Black Beige Black Black Beige Beige Black Blue Black Black Beige Blue Insertion loss (dB) Typical 0.2 0.2 0.2 0.2 Reflectance (dB) Typical <-25 <-25 <-40 <-40 Operating temperature range -10 to 60C -10 to 60C -10 to 60C -10 to 60C Storage temperature -10 to 60C -10 to 60C -10 to 60C -10 to 60C Material Connector ferrule Connector housing Boot Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Thermoplastic polymer Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Thermoplastic polymer Thermoplastic elastomer 6955 6955 6955 6955 Field termination kit No power needed 3M Crimplok Connector Ordering Information Product Number Connector Type Package Minimum Order 3M ID 6900 MM Crimplok SC Connector ceramic 60/carton 60 each 80-6108-4525-9 6901 MM Crimplok ST Connector ceramic 60/carton 60 each 80-6108-4523-4 8900 SM Crimplok SC Connector ceramic 60/carton 60 each 80-6110-1257-8 8901 SM Crimplok ST Connector ceramic 60/carton 60 each 80-6110-1259-4 Note: MM - Multimode; SM - Singlemode 21 3MTM Epoxy Connectors 3M Epoxy Connectors feature a pre-radiused, zirconia ceramic PC ferrule designed to provide contact of fibers for low reflection and low insertion loss. The 3M epoxy SC and FC connectors are intermateable within NTT specifications. These connectors are built to exacting ferrule length tolerances for maximum machine polish yield and bulk packaged to maximize factory cable assembly efficiency. 3M Epoxy Connectors can also be used with an anaerobic adhesive for fast-cure interconnect applications. 3MTM Epoxy SC Connector Features and Benefits 3MTM Epoxy SC, ST and FC Connectors Pre-radiused PC ferrule iber centered in radius; improved performance; designed to provide contact of fibers; F low reflection; consistent performance; excellent transmission performance Pull-proof (independent) ferrule Designed to maintain optical contact (FC, SC) High strength thermoplastic housing Virtually eliminates flaking; resists corrosion (FC, SC) 3MTM Epoxy Connector Specifications Multimode Singlemode Connector Type SC FC SC FC SC & FC/APC Product Number 6306 6202 8306 8203 8306 | 8206/APC Insertion loss (dB) Typical 0.2 0.2 0.2 0.2 0.2 Reflectance (dB) Typical <-25 <-25 <-40 <-40 <-65 Operating temperature range -10 to 60C -10 to 60C -40 to 75C -40 to 75C -40 to 75C Storage temperature -40 to 85C -40 to 85C -40 to 85C -40 to 85C -40 to 85C Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic Engineered resin Engineered resin Engineered resin Engineered resin Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Engineered resin Material Connector ferrule Connector housing and body Boot Thermoplastic elastomer See "Termination Kits" section for 3M Epoxy Connector termination tools. 3M Epoxy Connector Ordering Information Product Number Connector Type Package Min. Order 3M ID 6306-B MM Epoxy SC Connector ceramic, black boot 1/bag, 60/carton 60 each 80-6109-9247-3 6306-BE MM Epoxy SC Connector ceramic, beige boot 1/bag, 60/carton 60 each 80-6107-6501-0 6202 MM Epoxy FC/PC Connector ceramic 1/bag, 60/carton 60 each 80-6107-6540-8 8306 SM Epoxy SC Connector ceramic 1/bag, 60/carton 60 each 80-6107-6498-9 8306-SC/APC SM Epoxy SC/APC Connector ceramic 1/bag, 60/carton 60 each 80-6111-6899-0 8203 SM Epoxy FC/PC Connector ceramic 1/bag, 60/carton 60 each 80-6107-6537-4 8206-FC/APC SM Epoxy FC/APC Connector ceramic 1/bag, 60/carton 60 each 80-6111-6900-6 Note: MM - Multimode; SM - Singlemode 22 3M Termination Kits For simple, all-in-one field solutions, look no further than 3M Termination Kits. These kits provide the tools and materials necessary to terminate 3M fiber optic connectors. 3MTM CrimplokTM+ Connector Kits 3MTM CrimplokTM+ Connector Kits 8765T-UPC/8765T-APC provide the tools needed to terminate 3M Crimplok+ Connectors 8700-UPC 6700 and 8700-APC series, respectively. Both kits contain the same fiber preparation tools including a high quality cleaver, a work surface and a case with an integrated hook for easy hanging. Each kit contains a specific 3MTM CrimplokTM+ Activation Tool and 3MTM CrimplokTM+ Nano Finishing Tool, depending upon the connector type. UPC tools provide a square finish while APC tools provide a 8 angled finish. 3MTM CrimplokTM+ SC/UPC Connector Kit 8765T-UPC for 3MTM CripmlokTM+ Connectors 8700-UPC and 6700 Series 3MTM CrimplokTM+ SC/APC Connector Kit 8765T-APC for 3MTM CrimplokTM+ Connectors 8700-APC 3MTM CrimplokTM+ Connector Kit Ordering Information Product Number Description Packaging 3M ID 8765T-UPC Crimplok+ SC/UPC Connector Kit 1 kit 80-6116-2245-9 8765T-UPC/ 250-900-JKT Crimplok+ SC/UPC Field Termination Kit for 250/900um and Jacketed connectors 1 kit 80-6116-2252-5 8765T-APC Crimplok+ SC/APC Connector Kit 1 kit 80-6116-2214-5 8765T-APC/ 250-900-JKT Crimplok+ SC/APC Field Termination Kit for 250/900um and Jacketed connectors 1 kit 80-6116-2251-7 Replacement Parts for 3MTM CrimplokTM+ Connector Kits Product Number Description Packaging 3M ID 8765-AT/UPC Crimplok+ SC/UPC Activation Tool 1/package 80-6116-2199-8 8765-AT/APC Crimplok+ SC/APC Activation Tool 1/package 80-6116-2190-7 8765-NF/UPC Crimplok+ SC/UPC Nano Finishing Tool 1/package 80-6113-8075-1 8765-NF/APC Crimplok+ SC/APC Nano Finishing Tool 1/package 80-6113-8096-7 2534 Fiber cleaver (flat cleave) 1/package 80-6113-2377-7 6362-TH Tri-hole fiber stripping tool 1/package 80-6113-3936-9 6365-KS Aramid yarn fiber snips 1/package 80-6113-0462-9 05-00017 Lint free cloths 100 sheets/pk 80-6104-4324-6 8765-CS Crimplok+ cleaning swabs (100 count) 1/package 80-6113-8754-1 23 3MTM No Polish Connector Kits 3MTM No Polish Connector Kits provide the tools and materials needed to terminate singlemode and multimode SC, LC and ST flat splice no polish connectors. The 3MTM No Polish Connector Premium Kit with Cleaver 8865-C/PR has the tools of the regular 8865-C kit, but in a larger case with a work surface, fiber shard container, tweezers, brush and lint-free wipes in a tub. The 3MTM Fiber Optic Angle Cleave Kit 2565 provides the tools necessary to terminate 3MTM No Polish LC/APC and SC/APC Angle Splice Connectors. The 3MTM FibrlokTM Angle Splice Assembly Tool 2501-AS is also included to terminate 3MTM FibrlokTM Angle Splices. Replacement parts are available. 3MTM No Polish Connector Kit 8865-C 3MTM Fiber Optic Angle Cleave Kit 2565 3MTM No Polish Connector Premium Kit with Cleaver 8865-C/PR 3MTM No Polish Connector Kit Ordering Information Product Number Description Package 3M ID 8865-C No Polish Connector Kit with cleaver 1 kit 80-6113-2379-3 8865 No Polish Connector Kit (no cleaver) 1 kit 80-6113-2378-5 8865-C/PR No Polish Connector Premium Kit with cleaver 1 kit 80-6113-8783-0 8865/PR No Polish Connector Premium Kit (no cleaver) 1 kit 80-6114-8296-1 2565 Fiber optic angle cleaver kit with angle cleaver 1 kit 80-6113-2508-7 Replacement Parts for 3MTM No Polish Connector Kit Product Number Description Package 3M ID 2534 Fiber Optic Cleaver 1 each 80-6113-2377-7 2535 Fiber Optic Angle Cleaver 1 each 80-6113-2423-9 8835-AT No Polish LC Connector Assembly Tool 1 each 80-6113-2797-6 8845-AT No Polish ST Connector Assembly Tool 1 each 80-6113-9519-7 8865-AT No Polish SC Connector Assembly Tool 1 each 80-6113-2630-9 6362-TH Tri-hole fiber stripping tool 1 each 80-6113-3936-9 6365-KS Aramid yarn fiber snips 1 each 80-6113-0462-9 05-00017 Lint free cloths 100 sheets/pk 80-6104-4324-6 24 3MTM Hot Melt Termination Kits 3MTM Hot Melt Termination Kits 6366 (120V oven) and 6362 (230V oven) contain the tools and materials necessary to terminate 3MTM Hot Melt SC, ST, and FC Connectors, both singlemode and multimode. The 3MTM LC Hot Melt Expansion Kit 6650-LC is used in addition to the 6366/6362 hot melt termination kits to terminate 3MTM Hot Melt LC Connectors. 3MTM Hot Melt Termination Kits 6366 and 6362-230V 3MTM Hot Melt LC Expansion Kit 6650-LC Features and Benefits 3MTM Hot Melt Termination Kits Microscope with oblique and coaxial lighting Better dual view of fiber end face inspection Roll-up tool pouch Tools are organized and accessible Universal hot melt holders Fewer parts to carry, holds cable more securely Instruction CD Organized into video segments for quick reference 3M Hot Melt Termination Kit Ordering Information Product Number Description Packaging 3M ID 6366 Hot Melt Termination Kit for ST, FC, SC Hot Melt Connectors, 120V 1 each 80-6113-2599-6 6362-230V Hot Melt Termination Kit for ST, FC, SC Hot Melt Connectors, 230V 1 each 80-6113-2598-8 6650-LC Hot Melt LC Expansion Kit 1 each 80-6113-1353-9 3M Hot Melt Accessories Ordering Information Product Number Description Packaging 3M ID 6365-CC Hot Melt Consumable Kit for ST, SC, FC Lapping film, 2 m (254X) Lapping film, (263X) final polish Lint free cloth tub 8892 Universal Polishing Jig 1 each 200 sheets 50 sheets 200 sheets 1 each 80-6113-0452-0 6191 Hot Melt Cooling Stand 1 each 80-6106-2569-3 6650-LS LC Lapping Film Singlemode Consumable Kit (polishes 400 connectors) Lapping film, 9 m (461X) Lapping film, 2 m (254X) Lapping film, 0.5 m (661X) Lapping film, final polish (863XW) 1 each 20 sheets 100 sheets 40 sheets 80 sheets 80-6113-1472-7 6650-LM LC Lapping Film Multimode Consumable Kit (polishes 400 connectors) Lapping film, 9 m (461X) Lapping film, 2 m (254X) 1 each 20 sheets 100 sheets 80-6113-1473-5 80-6104-4324-6 80-6110-0932-7 25 3MTM Hot Melt Termination Kit 6366/6362 Kit Components Product Number Description Contents Qty. Replacement MOQ Package 3M ID 6312 120V 6-port oven with cooling plate (6366 Kit) 1 1 1 80-6111-6872-7 6323 230V 6-port oven with cooling plate (6362 Kit) 1 1 each 1 80-6111-6873-5 6365-HH Universal connector holders, ST, SC, FC 6 1 pkg 4/pkg 80-6113-1476-8 6365-PP Round polishing pad 2 1 each 1 80-6113-0456-1 6192-A 2 m lapping film (pale green) 200 1 each 500/pkg 60-6500-2346-2 863XW-DISC Final lapping film (frosted) 20 50 50/pkg 60-0200-0626-2 8892 Polishing jig 2 1 1 80-6110-0932-7 05-0002 Cable jacket stripper 1 1 1 80-6104-4314-7 6365-KS Aramid fiber snips 1 1 1 80-6113-0462-9 6362-TH Tri-hole fiber stripping tool 1 1 1 80-6113-3936-9 6365-CT Crimp tool 1 1 1 80-6113-0454-6 6365-FS Fiber scribe 1 1 1 80-6113-0458-7 6365-VS View scope (200X) 1 1 1 80-6113-0459-5 6366-CW Cleaning wipes with dispenser 100/pkg 12 pkgs 100/pkg 80-6113-2618-4 3MTM Hot Melt Oven 6312 26 3MTM CrimplokTM Termination Kit The Crimplok Termination Kit and accessories provide the tools and materials necessary to terminate 3MTM CrimplokTM Fiber Optic Connectors. Replacement parts are available. 3M Crimplok Termination Kit Ordering Information 3MTM CrimplokTM Kit 6955 (components displayed) Product Number Description Packaging 3M ID 6955 Crimplok termination kit 1 kit 80-6109-3664-5 3M Crimplok Accessories Ordering Information Product Number Product Description Packaging 3M ID 6955-HSC Scoring head, Crimplok SC 1 each 78-8073-7664-1 6955-HST Scoring head, Crimplok ST 1 each 78-8073-7676-5 05-00251 Cleaning Wires, 12 pack 12/pkg 80-6104-4345-1 3MTM CrimplokTM Kit 6955 (components loaded in pouch) 3M Crimplok Termination Kit 6955 Kit Components Product Number Product Description Contents Qty. Replacement MOQ Packaging 3M ID SP-00503 Lapping film, Crimplok 2 m (254x) 50 50 50 sheets 80-6108-4532-5 SM Lapping film, Crimplok SM (263x) 50 50 50 sheets 80-6110-1312-1 6955-T Activation tool, Crimplok with ST & SC scoring heads 1 1 1 each 80-6109-3662-9 6365-CT Universal crimp tool 1 1 1 each 80-6113-0454-6 6955-P Polishing tool, Crimplok 1 1 1 each 80-6109-3727-0 8892 Universal polishing jig 1 1 1 each 80-6110-0932-7 05-00002 Cable jacket stripper 1 1 1 each 80-6104-4314-7 6365-KS Aramid fiber snips 1 1 1 each 80-6113-0462-9 05-00017 Lint free cloths 100/pkg 1 pkg 100 sheets/pk 80-6104-4324-6 6362-TH Tri-hole fiber stripping tool 1 1 1 each 80-6113-3936-9 27 3MTM Epoxy Termination Tools 3M provides connectors with zirconia ceramic ferrules for use with two-part or anaerobic epoxy. These very high quality connectors are ideal for use in factory assembly applications or in field-mount restorations where a broad temperature range and stringent performance standards are required. The following 3M materials are available to use with common termination tools available on the market. It is important to use the proper syringe dispensing tip to assure proper placement of adhesives inside the connector ferrule and avoid overflow. 3MTM Epoxy SC/APC and FC/APC Connectors require the angle polishing puck included in the APC conversion kits. 3MTM Epoxy Termination Tools Ordering Information Necessary and required for 3M connector design Product Number Description Packaging Min. Order 3M ID 05-00255 Syringe, 3 cc 25 25 80-6104-4347-7 FO-25DT Dispensing tips (green) 1 pkg of 25 1 pkg of 25 80-6107-7441-8 6365-CT Universal crimp tool 1 1 80-6113-0454-6 8365-PP Soft polishing pad 1 1 80-6113-0457-9 261X-5S FO Polish film 5 m AL OC 4.5x5.5" SHT 500 500 60-0700-0508-1 262X-1S FO Polish film 1 m AL OC 4.5x5.5" SHT 500 500 60-0700-0507-3 661X-1.5S FO Polish film 1.5 m diamond 4.5x5.5" SHT 25 25 60-0700-0514-9 Recommended and available for cable preparation and connector finish Product Number Description Packaging Min. Order 3M ID 8892 Universal polishing jig 1 1 80-6110-0932-7 6365-FS Carbide fiber scribe 1 1 80-6113-0458-7 6365-KS Fiber snips 1 1 80-6113-0462-9 6362-TH Stripping tool 1 1 80-6113-3936-9 6365-VS 200x view scope 1 1 80-6113-0459-5 6366-CW Cleaning wipes with dispenser 12 12 80-6113-2618-4 05-00017 Lint free cloths 100-pack 1 1 80-6104-4324-6 28 3MTM FibrlokTM Optical Splice System A leader in mechanical splicing solutions, the 3MTM FibrlokTM Optical Splice is now specified in fiber-to-thepremises (FTTP) projects as a substitute for fusion splicing. Use it to splice single fibers without electrical power. The system is designed to minimize the need for lengthy training, specialized skills or experience. Whether your application is aerial, buried, underground or pedestal, outside plant or inside building, the Fibrlok splice system can provide an ideal solution. 3MTM FibrlokTM II Universal Optical Fiber Splice 2529 The 2529 optical fiber splice has successfully spliced combinations of 250 m and 900 m singlemode or multimode fibers for over 15 years. Utilizing the rugged, low cost 3MTM FibrlokTM Assembly Tool 2501, the 2529 splice can be installed in most indoor or outdoor applications. 3MTM FibrlokTM II Splice/Holder 2539 The 2539 splice/holder integrates the 3M Fibrlok II splice 2529, actuation tool, and holder all in one package. It helps enable fast, on-site installation without a separate assembly tool or splice tray. 3MTM VHBTM Tape on the bottom of the splice/holder permanently holds it at the splice location. 3MTM FibrlokTM 250 m Fiber Splice 2540G The 2540G splice helps enable fast, easy splicing of 250 m singlemode and multimode fiber for most splice installations, including fiber-to-the-premises. The 2540G splice is the 3M Fibrlok II 2529, ideal for many 3M fiber closure splice trays. Smaller splice allows higher splice density. Using the small, rugged 3MTM FibrlokTM Assembly Tool 2504G, it can be installed in almost any environment, whether it is an aerial application or inside a building. 3MTM FibrlokTM II Angle Fiber Splice 2529-AS The 2529-AS splice was designed for the splicing of combinations of 250 m and 900 m fibers. The Fibrlok angle splices help enable fast, on-site installation of fiber with <-60 dB optical reflection across temperature extremes for excellent analog video transmission performance. 3MTM FibrlokTM 250 m Angle Fiber Splice 2540-AS The 2540-AS splice specifically splices 250 m fiber with a smaller form factor. The 2540-AS angle fiber splice helps enable fast, on-site installation with <-60 dB optical reflection across temperature extremes for excellent analog video transmission performance. 29 Features and Benefits 3MTM FibrlokTM Splices < 0.1 dB insertion loss High performance Minimum tooling requirements Low capital cost No epoxy or electricity required Easy on-site installation Simple, easy to use Minimal training, lower installed cost Keyed, angle cleave splice Low reflectance, <-60dB across temperature extremes 3MTM FibrlokTM Angle Splice Assembly Tool 2501-AS 3MTM FibrlokTM Splices Specifications Product Number 2529 2539 2540G Dimensions 3.8 mm x 6.4 mm x 38.1 mm (0.15" x 0.25" x 1.50") 12.9 mm x 12.0 mm x 66.0 mm (0.51" x 0.47" x 2.60") 4 mm x 4 mm x 36 mm (0.16" x 0.16" x 1.42") Fiber diameter 125 m 125 m 125 m Coating diameter 250 or 900 m 250 or 900 m Tight Buffer 250 m Insertion loss (dB)* Typical < 0.1 < 0.1 < 0.1 Reflectance (dB)* Typical <-55 <-55 <-55 Operating temperature range* -40C to 75C -40C to 75C -40C to 75C Storage temperature -40C to 75C -40C to 75C -40C to 75C Material Engineering thermoplastic with aluminum alloy element & index matching gel Engineering thermoplastic with aluminum alloy element, index matching gel & VHB tape Engineering thermoplastic with aluminum alloy element & index matching gel *Specification for singlemode 3MTM FibrlokTM Splice 3MTM FibrlokTM Angle Splices Specifications Product Number 2529-AS 2540G-AS Dimensions 3.8 mm x 6.4 mm x 38.1 mm (0.15" x 0.25" x 1.50") 4.0 mm x 4.0 mm x 40.00 mm (0.16 x 0.16 x 1.42 in") Fiber diameter 125 m 125 m Coating diameter 250 m and 900 m 250 m Insertion loss (db)* Typical < 0.1 < 0.1 Reflectance (dB)* Typical <-65 <-65 Operating temperature range* -40 C to 70 C -40 C to 70 C Storage temperature -40 C to 70 C -40 C to 70 C Material Engineering thermoplastic with aluminum alloy element & index matching gel Engineering thermoplastic with aluminum alloy element & index matching gel *Specification for singlemode 3MTM FibrlokTM Splice 30 3MTM FibrlokTM Splices Ordering Information Product Number Description Packaging Min. Order 3M ID 2529 Fibrlok II Universal Optical Fiber Splice for 250 and 900 m fiber 6/pkg. 10 pkg/cs. 60 each 80-6107-5589-6 2529-K Fibrlok II 2529 Splices with Assembly Tool (60 splices, one 2501 assembly tool) 1 kit/cs. 1 kit 80-6107-5830-4 2539 Fibrlok II Splice/Holder, integrated actuation tool, and holder with tape 1/pkg. 60 pkg/cs. 60 each 80-6113-2005-4 2540G Fibrlok 250 m Fiber Splice for 250 m fiber 5/pkg. 12 pkg/cs. 60 each JE-4200-9482-1 2529-AS Fibrlok II Angle Fiber Splice 60/package 60 each 80-6113-2737-2 2540-AS Fibrlok 250 m Angle Fiber Splice 60/package 60 each JE-4200-8435-0 2501 Required for Fibrlok II splice 2529 1/cs. 1 each 80-6105-8187-0 2504G Required for Fibrlok splice 250 m 2540G 1/cs. 1 each JE-4200-8318-8 2501-AS Required for Fibrlok splices 2529-AS and 2540-AS 1/cs. 1 each 80-6113-2424-7 Splices Assembly Tools 3MTM FibrlokTM Splice Kits The 3M Fibrlok Splice Kits for flat splices are available with (2559-C) and without (2559) and contain all the materials needed to terminate 3MTM FibrlokTM Splices whether it be a singlemode or multimode splice. Detailed instructions are also provided. Included in the kits are the 3MTM FibrlokTM II Assembly Tool 2501 and 3MTM FibrlokTM 250 m Assembly Tool 2504G, simple-to-use tools designed for fast and easy installation. 3MTM Cleaver 2534 The 3MTM FibrlokTM Splice Kit 2559-C contains: * Fibrlok 2501 assembly tool for 3M Fibrlok II Splice 2529 * Fibrlok 2504G assembly tool for 3M Fibrlok 250 m Splice 2540G * 3M Fiber Cleaver 2534 (not included in 2559 kit) * 3M Fiber Stripping Tool 6362-TH * 3M Fiber Snips (scissors) 6365-KS * Lint free cloths (100/pkg.) * Cleaning alcohol bottle * FibrlokTM II splice 2529 (6 each) * FibrlokTM 250 m 2540G (5 each) 3MTM Fiber Optic Angle Cleaver Kit 2565 includes 3MTM Fiber Optic Angle Cleaver 2535, 3MTM FibrlokTM Angle Splice Assembly Tool 2501-AS and all tools necessary for 3MTM FibrlokTM Angle Splices. * FibrlokTM II Splice/Holder 2539 (2 each) The 3M Fiber Optic Angle Cleaver Kit 2565 provides the tools to terminate the 3M Fibrlok Angle Splice 2529-AS and 2540-AS. Also included in the kits are the 3M No Polish Connector Assembly Tools 8865-AT and 8835-AT for terminating SC and LC angle splice connectors. Replacement parts are available. 3MTM FibrlokTM Splice Kit with Cleaver 2559-C 31 3M Fibrlok Splice Kits and Accessories Ordering Information Product Number Description Packaging Minimum Order 3M ID Fibrlok Splice Kit with fiber cleaver 1/cs. 1 each 80-6113-2376-9 Kits 2559-C 2559 Fibrlok Splice Kit without fiber cleaver 1/cs. 1 each 80-6113-2375-1 2565 Fiber Optic Angle Cleave Kit with angle cleaver 1/cs. 1 each 80-6113-2508-7 1/cs. 1 each 80-6105-8187-0 Replacements for 3M Fibrlok Splice Kit 2501 Assembly tool required for Fibrlok II splice 2529 2504G Assembly tool required for Fibrlok 250 m 2540G 1/cs. 1 each JE-4200-8318-8 2534 Fiber cleaver 1/cs. 1 each 80-6113-2377-7 6362-TH Tri-hole fiber stripping tool 1/cs. 1 each 80-6113-3936-9 6365-KS Aramid yarn snips 1/cs. 1 each 80-6113-0462-9 05-00017 Lint free cloths 100/pkg. 1 pkg. 80-6104-4324-6 2535 Fiber optic angle cleaver 1/cs. 1 each 80-6113-2423-9 2501-AS Fibrlok Angle Splice assembly tool 1/cs. 1 each 80-6113-2424-7 3MTM Multi-Fiber Splice Preparation Kits 2600 The Multi-Fiber Splice Preparation Kit 2600 provides the components required to assemble the multi-fiber splice. The 3MTM Ribbon Construction Tool 2670 provides organization and "ribbonizing" of individual 250 m coated fibers prior to splicing. The tooling is designed to minimize the required tooling investment. 3MTM Multi-Fiber Splice Preparation Kit 2600 3M Multi-Fiber Splice Preparation Kit Ordering Information Product Number Description Packaging Min. Order 3M ID 2600 Multi-Fiber Optical Splice Prep Kit 1/cs 1 each 80-6106-1765-8 2670 Multi-fiber ribbon construction tool kit 1/cs 1 each 80-6106-1788-0 2671 Fiber optic ribbon construction tape 1000/pkg 1 pkg 80-6107-4395-9 05-00017 Lint free cloths 100/pkg 1 pkg 80-6104-4324-6 32 Grow with the speed of fiber. Give your network a leading edge with 3MTM Fiber Interconnect Solutions to help increase speed, size and connectivity. Reach out to your sales representative to discuss a custom suite of solutions to help your network succeed today and tomorrow. Business Card From the central office to your living room, 3M technology is helping make the world a smaller, more connected place. Learn more at 3M.com/Telecom. 33 We need these pages added to print correctly. Add content if you have it. 34 35 3M, Fibrlok and Crimplok are trademarks of 3M Company. Note: Product specifications and descriptions in this document are subject to change. All products contained herein are RoHS compliant. "RoHS 2011/65/EU" means that the product or part does not contain any of the substances in excess of the maximum concentration values ("MCVs") in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. This information is intended for use by persons with the knowledge and technical skills to analyze, handle and use such information. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 12 months from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Communication Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 USA Phone 1-800-426-8688 Fax 1-800-626-0329 Web 3M.com/Telecom Please recycle. Printed in USA (c) 3M 2018. All rights reserved. 80-6113-8674-1