1
This PBV connector, which is mainly used for
connecting PCB of flat television, is a crimping
type connector and is designed to have a
secure locking structure and a sucking area.
• Secure locking structure
• Sucking area on header
• Prevention of deformation of contact
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10mΩmax.
After environmental testing/ 20mΩmax.
• Insulation resistance: lnitial/ 1,000MΩmin.
• Withstanding voltage: 800V AC/minute
• Applicable wire: Conductor size/ AWG#28 to #22
insulation O.D./ 0.9 to 1.5mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ±0.03mm for all centers. The dimensions above should serve as a guideline. Contact JST for details.
Top entry type Side entry type
<2circuits > <2circuits >
<3 to 15 circuits > <3 to 15 circuits >