PL IA NT CO M *R oH S Features Applications RoHS compliant* IEC 61000-4-2 ESD (Min. Level 4) Surface Mount SMB package IEC 61000-4-4 EFT Standoff Voltage: 5 to 495 volts IEC 61000-4-5 Surge Power Dissipation: 600 watts SMBJ Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495 V and Breakdown Voltage up to 550 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns(R) Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 600 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps PM(AV) 5.0 Watts VF (Note 5) Volts TJ -55 to +150 C TSTG -55 to +175 C Steady State Power Dissipation @ TL = 75 C Maximum Instantaneous Forward Voltage @ IPP = 50 A (For Unidirectional Units Only) Operating Temperature Range Storage Temperature Range 1. 2. 3. 4. 5. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. VF = 3.5 V on SMBJ5.0A through SMBJ90A and VF= 5.0 V on SMBJ100A through SMBJ495A. How to Order SMBJ 5.0 CA Package SMBJ = SMB/DO-214AA Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMBJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Unidirectional Device Part Number SMBJ5.0A SMBJ6.0A SMBJ6.5A SMBJ7.0A SMBJ7.5A SMBJ8.0A SMBJ8.5A SMBJ9.0A SMBJ10A SMBJ11A SMBJ12A SMBJ13A SMBJ14A SMBJ15A SMBJ16A SMBJ17A SMBJ18A SMBJ20A SMBJ22A SMBJ24A SMBJ26A SMBJ28A SMBJ30A SMBJ33A SMBJ36A SMBJ40A SMBJ43A SMBJ45A SMBJ48A SMBJ51A SMBJ54A SMBJ58A SMBJ60A SMBJ64A SMBJ70A SMBJ75A SMBJ78A SMBJ85A SMBJ90A SMBJ100A SMBJ110A SMBJ120A SMBJ130A SMBJ150A SMBJ160A SMBJ170A SMBJ408A SMBJ495A Part Marking KE KG KK KM KP KR KT KV KX KZ LE LG LK LM LP LR LT LV LX LZ ME MG MK MM MP MR MT MV MX MZ NE NG NK NM NP NR NT NV NX NZ PE PG PK PM PP PR 408A 495A Bidirectional Device Part Number SMBJ5.0CA SMBJ6.0CA SMBJ6.5CA SMBJ7.0CA SMBJ7.5CA SMBJ8.0CA SMBJ8.5CA SMBJ9.0CA SMBJ10CA SMBJ11CA SMBJ12CA SMBJ13CA SMBJ14CA SMBJ15CA SMBJ16CA SMBJ17CA SMBJ18CA SMBJ20CA SMBJ22CA SMBJ24CA SMBJ26CA SMBJ28CA SMBJ30CA SMBJ33CA SMBJ36CA SMBJ40CA SMBJ43CA SMBJ45CA SMBJ48CA SMBJ51CA SMBJ54CA SMBJ58CA SMBJ60CA SMBJ64CA SMBJ70CA SMBJ75CA SMBJ78CA SMBJ85CA SMBJ90CA SMBJ100CA SMBJ110CA SMBJ120CA SMBJ130CA SMBJ150CA SMBJ160CA SMBJ170CA SMBJ408CA SMBJ495CA Part Marking Min. Max. AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ DE DG DK DM DP DR DT DV DX DZ EE EG EK EM EP ER 408C 495C 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 60 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 456 522 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 159 185 197 209 504 578 Notes: 1. Suffix `A' denotes a 5 % tolerance unidirectional device. 2. Suffix `CA' denotes a 5 % tolerance bidirectional device. Working Peak Reverse Voltage VRWM @ IT (mA) (Volts) Breakdown Voltage VBR (Volts) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 408 495 Maximum Reverse Leakage @ VRWM IR (A) 800 800 500 200 100 50 20 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current VRSM (Volts) IRSM (Amps) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 658 760 65.2 58.3 53.6 50.0 46.5 44.1 41.7 39.0 35.3 33.0 30.2 27.9 25.8 24.0 23.1 21.7 20.5 18.5 16.9 15.4 14.2 13.2 12.4 11.3 10.3 9.3 8.6 8.3 7.7 7.3 6.9 6.4 6.2 5.8 5.3 4.9 4.7 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 0.9 0.8 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMBJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMB (DO-214AA) 4.06 - 4.57 (0.160 - 0.180) 3.30 - 3.94 (0.130 - 0.155) 1.96 - 2.21 (0.077 - 0.087) 0.15 - 0.31 (0.006 - 0.112) 5.21 - 5.59 (0.205 - 0.220) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ...........................................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight .................................................. 0.003 ounces / 0.093 grams SMBJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 120 100 80 60 40 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 20 0 0 25 0 50 75 100 125 150 175 1 200 2 5 Pulse Waveform 50 100 10000 TA = 25 C Peak value (IRSM) 100 IRSM Half value= 2 Unidirectional Capacitance (pF) IP, Peak Pulse Current (%) 20 Typical Junction Capacitance TR=10 s Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 C TP 1000 Bidirectional 100 10 0 0 1.0 2.0 3.0 10 1 4.0 Pulse Rating Curve 1000 Steady State Power Derating Curve 100 RM(AV) Steady State Power Dissipation (W) 5.0 TA = 25 C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 5.0 mm Lead Areas 0.1 0.1 s 100 Standoff Voltage (Volts) T, Time (ms) PP, Peak Power (KW) 10 Number of Cycles at 60 Hz Ambient Temperature (C) 1.0 s 10 s 100 s TP, Pulse Width 1.0 ms 10 ms 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (C) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CDDFN5-0504N TVS/Steering DiodeDiode Array Series SMBJ Transient -Voltage Suppressor Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole Pin 1 Location 120 F D2 W B D1 D P A Trailer End ....... ....... C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) MM (INCHES) 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- REV. 08/12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. SMB (DO-214AA) 4.94 0.10 (0.194 - 0.004) 5.57 0.10 (0.210 0.004) 2.36 0.10 (0.093 0.004) 1.55 0.05 (0.061 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 0.20 (0.512 0.008) 1.75 0.10 (0.069 0.004) 5.50 0.05 (0.217 0.002) 4.00 0.10 (0.157 0.004) 4.00 0.10 (0.157 0.004) 2.00 0.05 (0.079 0.002) 0.30 0.10 (0.012 0.004) 12.00 0.20 (0.472 0.008) 18.4 MAX. (0.724) 3,000