SMBJ 5.0 - 170A SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
V
BR
: 6.8 - 200 Volts
P
PK
: 600 Watts
FEATURES :
* 600W surge capability at 1ms
* Excellent clamping capability
* Low inductance
* Response Time Typically < 1ns
* Typical I
R
less then 1
µ
A above 10V
* Case : SMB Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.108 gram
MAXIMUM RATINGS
Rating at Ta = 25 ?C ambient temperature unless otherwise specified.
Rating Symbol Value Units
Peak Pulse Power Dissipation on 10/1000µs (1)
waveform (Notes 1, 2, Fig. 3) PPPM Minimum 600 Watts
Peak Pulse Current on 10/1000µs
waveform (Note 1, Fig. 5) IPPM See Table Amps
Peak forward Surge Current
8.3 ms single half sine-wave superimposed on
rated load ( JEDEC Method )(Notes 2, 3)
Maximum Instantaneous Forward Voltage at 50A (Note 3,4 ) VFM See Note 3, 4 Volts
Operating Junction and Storage Temperature Range TJ, TSTG - 65 to + 150 ?C
Note :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 ?C per Fig. 1
(2) Mounted on 5.0mm2 (0.013mm thick) land areas.
(3) Measured on 8.3ms. Single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
(4) VF=3.5V for SMBJ5.0 thru SMBJ90 devices and VF=5V for SMBJ100 thru SMBJ170 devices.
UPDATE : MAY 25, 2000
0.22
?
0.07
2.0
?
0.1
5.4
0.15
2.3
?
0.2
4.8
0.15
3.6 ? 0.15
SMB (DO-214AA)
1.1
?
0.3
Dimensions in millimeter
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
ELECTRONICS INDUSTRY (USA) CO., LTD.
ELECTRICAL CHARACTERISTICS
Rating at Ta = 25 ?C ambient temperature unless otherwise specified
Reverse Maximum Maximum Maximum
Breakdown Voltage @ ITStand-off Reverse Peak Pulse Clamping
( Note 1 ) Voltage Leakage Surge Current Voltage @ IPPM
TYPE
Marking Code @ VWM (See Fig. 2)
VBR (V) ITVWM IRIPPM VC
Min. Max. (mA) (V) (µA) (A) (V)
SMBJ5.0 606I 6.40 7.55 10 5.0 800 62.5 9.6
SMBJ5.0A 656I 6.40 7.25 10 5.0 800 65.2 9.2
SMBJ6.0 607C 6.67 8.45 10 6.0 800 52.6 11.4
SMBJ6.0A 657C 6.67 7.67 10 6.0 800 58.3 10.3
SMBJ6.5 607I 7.22 9.14 10 6.5 500 48.7 12.3
SMBJ6.5A 657I 7.22 8.30 10 6.5 500 53.6 11.2
SMBJ7.0 608E 7.78 9.86 10 7.0 200 45.1 13.3
SMBJ7.0A 658E 7.78 8.95 10 7.0 200 50.0 12.0
SMBJ7.5 609A 8.33 10.67 1.0 7.5 100 42.0 14.3
SMBJ7.5A 659A 8.33 9.58 1.0 7.5 100 46.5 12.9
SMBJ8.0 609G 8.89 11.3 1.0 8.0 50 40.0 15.0
SMBJ8.0A 659G 8.89 10.23 1.0 8.0 50 44.1 13.6
SMBJ8.5 6010 9.44 11.92 1.0 8.5 20 37.7 15.9
SMBJ8.5A 6510 9.44 10.82 1.0 8.5 20 41.7 14.4
SMBJ9.0 6011 10.0 12.6 1.0 9.0 10 35.5 16.9
SMBJ9.0A 6511 10.0 11.5 1.0 9.0 10 39.0 15.4
SMBJ10 6012 11.1 14.1 1.0 10 5.0 31.9 18.8
SMBJ10A 6512 11.1 12.8 1.0 10 5.0 35.3 17.0
SMBJ11 6013 12.2 15.4 1.0 11 5.0 29.9 20.1
SMBJ11A 6513 12.2 14.0 1.0 11 5.0 33.0 18.2
SMBJ12 6014 13.3 16.9 1.0 12 5.0 27.3 22.0
SMBJ12A 6514 13.3 15.3 1.0 12 5.0 30.2 19.9
SMBJ13 6015 14.4 18.2 1.0 13 5.0 25.2 23.8
SMBJ13A 6515 14.4 16.5 1.0 13 5.0 27.9 21.5
SMBJ14 6017 15.6 19.8 1.0 14 5.0 23.3 25.8
SMBJ14A 6517 15.6 17.9 1.0 14 5.0 25.8 23.2
SMBJ15 6018 16.7 21.1 1.0 15 5.0 22.3 26.9
SMBJ15A 6518 16.7 19.2 1.0 15 5.0 24.0 24.4
SMBJ16 6019 17.8 22.6 1.0 16 5.0 20.8 28.8
SMBJ16A 6519 17.8 20.5 1.0 16 5.0 23.1 26.0
SMBJ17 6020 18.9 23.9 1.0 17 5.0 19.7 30.5
SMBJ17A 6520 18.9 21.7 1.0 17 5.0 21.7 27.6
SMBJ18 6022 20.0 25.3 1.0 18 5.0 18.6 32.2
SMBJ18A 6522 20.0 23.3 1.0 18 5.0 20.5 29.2
SMBJ20 6024 22.2 28.1 1.0 20 5.0 16.7 35.8
SMBJ20A 6524 22.2 25.5 1.0 20 5.0 18.5 32.4
SMBJ22 6026 24.4 30.9 1.0 22 5.0 15.2 39.4
SMBJ22A 6526 24.4 28.0 1.0 22 5.0 16.9 35.5
SMBJ24 6029 26.7 33.8 1.0 24 5.0 14.0 43.0
SMBJ24A 6529 26.7 30.7 1.0 24 5.0 15.4 38.9
SMBJ26 6031 28.9 36.6 1.0 26 5.0 12.4 46.6
SMBJ26A 6531 28.9 33.2 1.0 26 5.0 14.2 42.1
SMBJ28 6033 31.1 39.4 1.0 28 5.0 12.0 50.0
SMBJ28A 6533 31.1 35.8 1.0 28 5.0 13.2 45.4
SMBJ30 6036 33.3 42.2 1.0 30 5.0 11.2 53.5
SMBJ30A 6536 33.1 38.3 1.0 30 5.0 12.4 46.6
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
ELECTRONICS INDUSTRY (USA) CO., LTD.
Reverse Maximum Maximum Maximum
Breakdown Voltage @ ITStand-off Reverse Peak Pulse Clamping
( Note 1 ) Voltage Leakage Surge Current Voltage @ IPPM
TYPE
Marking Code @ VWM (See Fig. 2)
VBR (V) ITVWM IRIPPM VC
Min. Max. (mA) (V) (µA) (A) (V)
SMBJ33 6040 36.7 46.5 1.0 33 5.0 10.2 59.0
SMBJ33A 6540 36.7 42.2 1.0 33 5.0 11.3 53.3
SMBJ36 6043 40.0 50.7 1.0 36 5.0 9.3 64.3
SMBJ36A 6543 40.0 46.0 1.0 36 5.0 10.3 58.1
SMBJ40 6048 44.4 56.3 1.0 40 5.0 8.4 71.4
SMBJ40A 6548 44.4 51.1 1.0 40 5.0 9.3 64.5
SMBJ43 6051 47.8 60.5 1.0 43 5.0 7.8 76.7
SMBJ43A 6551 47.8 54.9 1.0 43 5.0 8.6 69.4
SMBJ45 6054 50.0 63.3 1.0 45 5.0 7.5 80.3
SMBJ45A 6554 50.0 57.5 1.0 45 5.0 8.3 72.7
SMBJ48 6057 53.3 67.5 1.0 48 5.0 7.0 85.5
SMBJ48A 6557 53.3 61.3 1.0 48 5.0 7.7 77.4
SMBJ51 6061 56.7 71.8 1.0 51 5.0 6.6 91.1
SMBJ51A 6561 56.7 65.2 1.0 51 5.0 7.3 82.4
SMBJ54 6065 60.0 76.0 1.0 54 5.0 6.2 96.3
SMBJ54A 6565 60.0 69.0 1.0 54 5.0 6.9 87.1
SMBJ58 6070 64.4 81.6 1.0 58 5.0 5.8 103.0
SMBJ58A 6570 64.4 74.1 1.0 58 5.0 6.4 93.6
SMBJ60 6072 66.7 84.5 1.0 60 5.0 5.6 107
SMBJ60A 6572 66.7 76.7 1.0 60 5.0 6.2 96.8
SMBJ64 6076 71.1 90.1 1.0 64 5.0 5.3 114
SMBJ64A 6576 71.1 81.8 1.0 64 5.0 5.8 103
SMBJ70 6084 77.8 98.6 1.0 70 5.0 4.8 125
SMBJ70A 6584 77.8 89.5 1.0 70 5.0 5.3 113
SMBJ75 6090 83.3 105.7 1.0 75 5.0 4.5 134
SMBJ75A 6590 83.3 95.8 1.0 75 5.0 4.9 121
SMBJ78 6093 86.7 109.8 1.0 78 5.0 4.3 139
SMBJ78A 6593 86.7 99.7 1.0 78 5.0 4.7 126
SMBJ85 60B0 94.4 119.2 1.0 85 5.0 3.9 151
SMBJ85A 65B0 94.4 108.2 1.0 85 5.0 4.4 137
SMBJ90 60B1 100 126.5 1.0 90 5.0 3.8 160
SMBJ90A 65B1 100 115.5 1.0 90 5.0 4.1 146
SMBJ100 60B2 111 141.0 1.0 100 5.0 3.4 179
SMBJ100A 65B2 111 128.0 1.0 100 5.0 3.7 162
SMBJ110 60B3 122 154.5 1.0 110 5.0 3.0 196
SMBJ110A 65B3 122 140.5 1.0 110 5.0 3.4 177
SMBJ120 60B4 133 169.0 1.0 120 5.0 2.8 214
SMBJ120A 65B4 133 153.0 1.0 120 5.0 3.1 193
SMBJ130 60B5 144 182.5 1.0 130 5.0 2.6 231
SMBJ130A 65B5 144 165.5 1.0 130 5.0 2.9 209
SMBJ150 60B8 167 211.5 1.0 150 5.0 2.2 268
SMBJ150A 65B8 167 192.5 1.0 150 5.0 2.5 243
SMBJ160 60B9 178 226.0 1.0 160 5.0 2.1 287
SMBJ160A 65B9 178 205.0 1.0 160 5.0 2.3 259
SMBJ170 60D0 189 239.5 1.0 170 5.0 2.0 304
SMBJ170A 65D0 189 217.5 1.0 170 5.0 2.2 275
Note:
( 1 ) V
BR
measured after I
T
applied for 300
µ
s., I
T
= square wave pulse or equivalent.
( 2 ) Surge Current Waveform per Figure 5 and Derate per Figure 1
( 3 ) A Transient suppressor is normally selected according to the reverse " Stand-off Voltage " (V
WM
) which should be
equal to or greater then the D.C. or continuous peak operating voltage level.
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
RATING AND CHARACTERISTIC CURVES ( SMBJ5.0 - SMBJ170A )
FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE
PERK FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175
Ta, AMBIENT TEMPERATURE, ( ?C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL JUNCTION CAPACITANCE FIG.4 - PEAK PULSE POWER RATING CURVE
FIG.5 - PULSE WAVEFORM
0 1.0 2.0 3.0 4.0
80
60
40
20
120
6,000
100
10
100
010
50
100
1,000
10
0.1
1.0
tp, PULSE WIDTH, SEC
PEAK FORWARD SURGE
CURRENT, AMPERES
PP,PEAK POWER (kW)
100 200
10
20
60
1
2
4
6
40
100
10 20 100
1
2
0.1µs1.0µs10µs100µs10ms
1.0ms
200
VR, REVERSE STAND OFF VOLTAGE,VOLTS
CJ, CAPACITANCE, pF
50
100
0
tr
?
10
µ
s
Peak Value
IPPM
Half Value - IPPM
2
Ta=25 ?C
Pulse Width (tp) is defined
as that point where the peak
current decays to 50%
of IPPM
td
t, TIME(ms)
IPPM, PEAK PULSE CURRENT, %
TJ = TJmax
8.3 ms SINGLE HALF SINE WAVE
JEDEC METHOD
NON-REPETITIVE PULSE
WAVEFORM SHOWN IN
FIG. 5 Ta=25?C
VR Measured @
Stand-off
voltage
VR Measured @
Zero Basic (0V)
TJ = 25?C
f = 1.0 MHz
Vsig = 50 mVP-P
PEAK PULSE DERATING IN % OF
PEAK POWER OR CURRENT
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
ELECTRONICS INDUSTRY (USA) CO., LTD.