Special
Purpose
D-3
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
www.glenair.com E-Mail: sales@glenair.com
CAGE Code 06324 Rev. 05.20.15
D
Grommet Sealing Plugs
MS27488 Type
Size 0 Through 23
SEALING
PLUG
UNWIRED
CONTACT
Installation of Sealing Plugs
“It is recommended to install unwired
contacts in unused holes.
Insert sealing plug behind each unwired
contact. Push sealing plug (large end rst)
until seated.”
(NAVAIR 01-1A-505–1 Installation manual)
Here's
a Tip!
Grommet Sealing Plugs
Grommet sealing plugs are used to seal unwired contact cavities. The size #23 sealing plug is specially
designed to t Glenair Series 80 Mighty Mouse grommets. Sizes 20 through 0 plugs conform to
MS27488 requirements. After installing unwired contacts into unused cavities, insert knob end
of sealing plug into grommet until it bottoms against the unwired contact per illustration. Install
sealing plugs with standard contact insertion/extraction tools . Size #23 plug is polyphenylsulphone,
other sizes are per MS27488 requirements.
Fig. Size Color
Part
Number
Military Part
Number
Insertion/
Extraction Tool
A Ref. B Ref. C Ref. D Ref.
in. mm. in. mm. in. mm. in. mm.
# Black - (None) M/-
. . . . . . . .
# Red - MS-- M/-
. . . . . . . .
# Green - MS-- M/-
. . . . . . . .
# Orange - MS-- M/-
. . . . . . . .
N/A # Red MS-- Not Recommended
. . . . . . . .
N/A # Blue MS-- Not Recommended
. . . . . . . .
N/A # Yellow MS-- Not Recommended
. . . . . . . .
12 4
3
B
Ø A
Ø C
D
