Polygon Mirror Scanner Motor
Polygon Mirror Scanner Motor
- 1 -
■INTRODUCTION
This polygon mirror scanner motor is designed to rotate at a constant designated speed.
Polygon mirror scanner motor is core component in laser beam printer is applied OA appliance.
And this motor is used to deflect Laser beam of the polygon mirror.
It is need to spin at high speed to increase quantity of the print page. It is need to control by an
accurate velocity because of the stability of the print quality.
■FEATURE AND APPLICATION
●Feature
- Drive Circuit Inside
- Wide line-up from low speed to high speed
- Low Mechanical Noise & Vibration By Dynamic Bearing
- Low Jitter Dynamic Bearing
- External Clock Drive Method
●Application
- Laser Printer
- Digital PPC
- Laser PPF
- Bar code scanner, etc.
Polygon Mirror Scanner Motor
- 2 -
■STRUCTURE
Polygon Mirror Scanner Motor
- 3 -
■APPEARANCE AND DIMENSION
※All standards will be able to confront in demand of the customer under discussing
MODEL PCB SIZE
(A x B) OPTICAL
HEIGHT (H) MIRROR SIZE
FACET x I.C.D(L) x T(T) BOSS
(ΦD)
DMPSGC11A
48 x 68
13.5 F6 x 36.0 x T3.0 20.0
DMPSGC14D 12.0 F6 x 34.64 x T2.0 9.0
DMPSGC14E 12.0 F6 x 34.64 x T2.0 9.0
DMPSGC14H 11.5 F6 x 34.64 x T2.0 9.0
DMPSGC14G 11.5 F6 x 34.64 x T2.0 9.0
DMPSGC26A 13.5 F6 x 34.64 x T2.0 9.0
DMPSGC27A 11.0 F7 x 32.0 x T2.0 9.0
DMPSGC34A 11.0 F6 x 34.64 x T2.0 9.0
DMPSGC47A 11.0 F6 x 34.64 x T2.0 9.0
DMPSGC54A 11.0 F7 x 32.0 x T2.0 9.0
DMPSGC59A 11.0 F7 x 40.0 x T2.0 9.0
DMPSGC62A 11.5 F6 x 34.64 x T2.0 9.0
DMPSGC30A 56 x 115 10.7 F12 x 25 x T5.0 -
HA
B
T
LΦD
Polygon Mirror Scanner Motor
- 4 -
■PART NUMBERING
DMPSGC11A
●
1●
2●
3●
4●
5●
6●
7
Abbreviation of SAMSUNG DC Motor
Application
Function of DC Motor
Structure of DC Motor
Type
Serial Number of Development Order
Minor-change
●
1Abbreviation of SAMSUNG DC Motor
●
2Application
Symbol Application
PLASER PRINTER
●
3Function of DC Motor
Symbol Function of DC Motor
SSPINDLE SCANNER
●
4Structure of DC Motor
Symbol Structure of DC Motor
GGENERAL
●
5Type
Symbol Type
CCORE Type
●
7
●
2
●
6
●
3
●
4
●
5
●
1
Polygon Mirror Scanner Motor
- 5 -
●
6Serial Number of Development Order
Giveanumberfrom00to99inorderofdevelopment.
●
7Minor-Change
Give a character from A to Z in order of Minor-Change.
Polygon Mirror Scanner Motor
- 6 -
■PACKAGING
●EPS TRAY
EPS TRAY (MOTOR 20pcs)
NO ITEM MATERIAL & SPEC Q'TY / PALLET
1CAP POLYPROPYLENE, 69x50.5x23 1,800
2 MOTOR 68x48x19.6 1,800
3 SILICAGEL 3g 180
4VINYL VINYL, 100x80xT0.04 1,800
5 EPS TRAY EPS#30, 514x338x50 108
1
2
3
4
5
Polygon Mirror Scanner Motor
- 7 -
●OUTERCARTONBOX
OUTER CARTON BOX (1 EMPTY TRAY, 5 TRAY WITH MOTORS)
NO ITEM MATERIAL & SPEC Q'TY / PALLET
6OUTERBOX CORRUGATED BOARD(A=A)
518x342x248 (INSIDE DIMENSION) 18
7 TAPE POLYPROPYLENE, W50 18
EMPTY TRAY
5
5
6
7
6
5TRAY
MOTOR 100 PCS
SILICAGEL 10 PCS
(2PCS/TRAY)
SIDE MARKING
MODEL *********
Q'TY 100 EA
USER *********
PART NO
LOT NO ABCDEF
ABCDEF
MOTOR Rev.(A : THE FIRST SPEC)
DAY
MONTH
THE END NUMBER OF YEAR
Polygon Mirror Scanner Motor
- 8 -
●PALLET
PALLET (18 CARTON BOX, MOTOR : 1,800 pcs)
NO ITEM MATERIAL & SPEC Q'TY / PALLET
8PALLET WOOD, 1,100x1,100x120 1
9LDP
LOW DENSITY POYESTER W500, T0.025
LAPPED IT AROUND EACH FACES 1
6
8
9
6
9
8
Polygon Mirror Scanner Motor
- 9 -
■RELIABILITY TEST DATA
25[℃]·65[%RH] However, the conditions mentioned blow can be applied for testing as far as no
technical problem Temperature : 10~35[℃], Relative humidity : 45~80[%RH]
No Item Measurement Conditions Specifications
(Example)
1 Starting current Measured at 24[V]
Measured at rated voltage and rated load 1.0 [A] or less
2 Rated current Measured at rated voltage and rated load
Measured in about 10[s] after motor starts 0.60 [A] or less
3 Start time
Time after the motor start and before
the lock signal is output in the rated voltage,
rated load. 3.5 [s] or less
Time after the motor start and before
the satisfaction of specifications in the rated
voltage, rated load. 5.0 [s] or less
4Jitter
LF (at 600 facet)
Measured using a standard circuit and jig. 0.020 [%] or less
RF (at 6 facet)
Measured using a standard circuit and jig. 0.010 [%] or less
5 Dynamic balance
Measured using a balancer
Mirror side 1[㎎·㎝]or less
Measured using a balancer
Rotor case side 1[㎎·㎝]or less
Measured using a balancer
Static 2[㎎·㎝]orless
6Pyramid error
of the mirror
at operation
Total
Measured by rotating the motor at the rated
speed of rotation 150[″]p-p or less
Adjacent
Measured by rotating the motor at the rated
speed of rotation 100[″]p-p or less
7NoiseMeasured 1[m] from the side of the motor 60 [dB-A] or less
Polygon Mirror Scanner Motor
- 10 -
No Item Measurement Conditions Specifications
1Operating Environmental
Conditions No condensation 0~60[℃]
10~85[%RH]
2Storage Environmental
Conditions No condensation -40~70[℃]
10~90[%RH]
3 Withstand Vibration test
1.96[㎨] acceleration and 5~60~5[Hz],
Period 15[min] Vibration for 30[min],
each up-down, left-right, back-front,
at operating
Rated value
described in
sections1to7
shall be satisfied.
(Specification for
Characteristics)
24.5[㎨] acceleration and 5~60~5[Hz],
Period 15[min] Vibration for 30[min],
each up-down, left-right, back-front,
at non operating
4 Withstand Shock test
980[㎨] acceleration and 11[ms] half sine
wave shock for once each
up-down,left-right,back-front,
at operating
5Storagetest
①40[℃] 90[%RH] for 120[h]
②-40[℃] for 120[h]
③70[℃] for 120[h]
No condensation
6Drop test of packed
motor 1.2 [m]
7Heatshocktest -40[℃],70[
℃]each2[hr]5cycle
8 Continuous use Continuous operation shall be performed
3000[h] under the rated voltage and rated
load.
within the rated
values described
in sections
1to7
(Specification for
Characteristics)
9Interrupted Continuous
use
The switching operation
(10[sec] on and 30[sec] off) shall be
performed 300,000times under the
environmental conditions above
