Power Inductors Unshielded- SMT Drum 13 x 5 mm POWER INDUCTORS ( SDIP1306 Series ) Used in high frequency DC/DC converters. Low DC resistance. Robust base for reflow soldering. High current handling up to 20 Amps with heavy wire. Open construction provides stable inductance for increasing currents. Inductance range from 0.91 H to 470 H Energy storage limit of 400 J. Tape & Reel : 250 pcs/Reel, 4 Reels/Box. MAX. DIM : L = 20.32 mm W= 15.24 mm H = 8.38 mm MECHANICAL SPECIFICATIONS Top View Side View PCB Layout (Top) 1 0.660 [16.76] XXX YYWW FALCO 0.500 [12.70] Schematic 1 0.800 [20.32] max. 0.145 [3.68] 2 2 0.330 [8.38] max. 0.600 [15.24] max. 0.070 [1.78] *FINAL DESIGN FOR PCB LAYOUT IS LEFT TO THE USER Marking Inductance Value / Add "L" letter for RoHS parts INCHES [mm] Packaging Information 9.30 mm 1.52 mm Tape & Reel Pin #1 Indicator. C A ITEM 101.6 mm D A B C D 330 mm FALCO ELECTRONICS MEXICO C/O FALCO USA,INC 4970 SW 72 AVE #105 MIAMI FL. 33155 U.S.A. PH (305) 662-7276 / FAX (305)667-6377 SECTION A-A FPN: REV: QTY: DATE CODE: A Carrier tape thickness 0.40 mm DESCRIPTION QTY. PER REEL QTY. PER BOX PITCH TAPE WIDTH QTY. 250 1000 24 mm 32 mm See tape and reel information 42-001 ELECTRICAL SPECIFICATIONS FALCO PART NUMBER RoHS PART NUMBER OCL(H)1 20% D13009 0.91 DCR ( m ax) 0.0033 D13003 1.5 0.0045 D13002 D13L02 D13010 D13011 D13006 D13L06 I rating2 (Amp) I sat 3 (Amp) 20.00 30.00 17.00 23.00 2.2 0.0065 12.00 16.00 3.3 0.0073 12.00 14.50 4.3 0.0078 11.00 13.00 5.2 0.0097 10.00 11.50 D13012 6.8 0.0120 7.50 11.00 D13008 10 0.0240 6.00 10.00 D13028 22 0.0470 4.60 7.00 D13027 39 0.0650 3.75 5.40 D13029 47 0.0860 2.90 5.00 D13031 68 0.1300 2.30 3.50 D13007 220 0.3360 1.20 2.40 330 0.5600 1.00 1.90 470 0.7350 0.92 1.50 D13032 D13L32 D13030 1. Inductance tested at 100 KHz 0.25 V. 2. Temperature rise is 40C Typ. 3. Inductance drop 10% Typ. at Isat. 4. Operating Temp. range -40 to +85C. 5. OCL and DCR tested at Ta= 25C. SDIP1306.PDF REV: F3 09/05 1-2 phone (305) 662-7276 e-fax: (520) 752-3268 e-mail:sales@falcomex.com www.falco.com Power Inductors Unshielded- SMT Drum 13 x 5 mm Inductance & Energy vs Current ( SDIP1306 Series ) 1000.0 E (D13009) E (D13003) E (D13010) L(H) & E(J) 100.0 10.0 L (D13010) L (D13003) 1.0 L (D13009) 0.1 0 5 10 15 20 25 30 IDC (Amperes) SDIP1306.PDF REV: F3 09/05 2-2 phone (305) 662-7276 e-fax: (520) 752-3268 e-mail:sales@falcomex.com www.falco.com