MIL-C-85049/24A 30 November 1990 DING MIL-C-85049/24 16 January 1980 MS3 188B 10 May 1982 MILITARY SPECIFICATION SHEET CONNECTOR ACCESSORIES, ELECTRICAL, 8ACKSHELL, NONENVIRONMENTAL, 90, SHIELO TERMINATION, CATEGORY 3A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES 111 CONNECTORS) This specification is approved for use by all Departments and Agencies"bf the Department of Oefense. The requirements for this specification in that issue of sheet and the the Department acquiring the product issue described of the following herein shall consist specification of listed of Oefense Index of Specifications and Standards (0001SS) specified in the solicitation: MIL-C-85(149. -"'""'e<::.= STYLE . I Cw , STYLE 2 omo.u AMSC N/A DISTRIBUTILIN .STATEMEP; "i,\: Approved for public release; distribution ..: Page 1 of lJ Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. is FSC 5935 ited. unlim MIL-C-85049/24A TABLE 1. Dimensions. Fits Shel 1 of Connector A (see note 6 ) Wire Bundle Dash MIL-C- MIL-C- MIL-C- MIL-C- C1 amD No. 81703 26482 5015 83723j I Si Zer lAccoMModati Style on Ranqe Ser 3 Ser 2 Crimp Ser 111 Ml n Max , 1 1 . 4 1.125 I .250 3 6 .437 .250 2 2 \ / \/ -- /lvl -- 3 8 8S 8 10s, 10SL 10 4 -n-v\l `0 v Y 6 7 7 12 12,12s 12 8 9 12 14 14,14s 10 Oash No. E ~. 125 B c D Dia ~.125 Ref Max 1.800 1.027 .669 1.320 1.027 .669 4 .125 .250 1 1.200 1 .0Z7 .617 4 .125 .312 1 1.920 1.027 .734 6 .250 .375 1 1.320 1.027 .734 4 .125 .312 1 1.940 1.027 .858 6 .250 .437 1 1.940 1.027 .858 10 .350 .500 1 1.335 1.027 .858 6 .250 .437 1 2.010 1.027 .984 10 .350 .575 1 1.655 1.027 .984 14 V Thread Class 2A F Max G Dia Max H Max 1 .636 .625-24 UNEF 1.18 - 1.57 2 1.386 .750-20 UNEF 2.02 .858 2.41 3 .541 .625-24 UNEF 1.09 - 1.48 "4 .636 .625-24 UNEF 1.18 - 1.57 5 .636 .750-20 UNEF 1.27 6 .641 .625-24 UNEF 1.18 - 1.57 7 .641 .750-20 UNEF 1.28 - 1.67 B .641 1.000-20 UNEF 1.37 9 .741 .750-20 UNEF 1.38 10 .741 1.000-20 UNEF 1.47 1.66 "- 1.76 - -: Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. 1.77 1.86 MIL-C-85049124A TABLE 1. Dimensions (continued). Fits Shel 1 of Connector A (see note 6) B Oash MIL-C- MIL-C- MIL-C- MIL-C- C1 amp Wire Bundle No. 81703 26482 5015 83723 Size Acccmsnodation Style ~.125 Range Ser 3 Ser 2 Crimp Ser 111 Xl n Max 11 19 16 13 18 18 15 20 20 17 22 19 24 r I .250 .437 1 2.100 1.027 1.112 12 .500 .700 1 1.745 1.059 1.112 10 .350 .625 1 2.270 1.027 1.218 16 .625 .779 1 1.920 1.156 1.218 10 .350 .625 1 2.270 1.027 1.345 16 .625 .904 1 1.920 1.156 1.345 12 .500 .750 1 2.380 1.059 1.468 20 .875 1.029 1 2.025 1.375 1.468 12 .500 .750 1 2.380 1.059 1.593 20 .875 1.144 1 2.025 1.375 1.593 24 20 Oash No. 6 22 18 24 Max 20 16 22 Ref 18 14 37 O Oia 16,16s 16 12 27 c E +.125 I V Thread Cl ass 2A I F Max I G Oia Max I H Max 11 .926 I .750-20 UNEF I 1.59 I - I 1.98 12 .926 I 1.1875-18 UNEF I 1.77 I - I 2.15 13 1.016 I 1.000-20 UNEF I 1.80 I - I 2.19 14 1.016 1.4375-18 UNEF 1.97 - 2.36 I 15 1.016 1.000-20 UNEF 1.80 - 2.19 I 16 1.016 1.4375-18 UNEF 1.97 I 17 1.166 1.1875-18 UNEF 2.11 - 2.50 I 18 1.166 1.750-10 UNS 2.29 - 2.68 19 1.166 1.1875-18 UNEF 2.11 -. 2.50 20 1.166 1.750-18 UNS 2.29 - 2.68 k 1- 2.36 3 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. MIL-C-85049/24A TARI ,, -----F 1. . I Dash No. I E +.125 I Dimensions (continued). V Thread Class 2A I F Max w 3.06 =+3 3.36 I 24 ! 1.616 I 1.750-18 UNS I 2.81 I 25 I 1.616 I 2.250-16 UN I 3.07 I 26 I 1.816 I 1.4375-18 UNEF ] I 27 i 1.816 I 2.000-18 UNS I 3.13 3.36 3.62 -. 28 1.816 r 2.500-18 UN 1 3.13 3.39 1 29 2.566 1.4375-18 UNEF 3.88 30 2.566 2.000-18 UNS 3.88 4+ 3.94 4.43 4.43 -, Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. MIL-C-85049/24A TABLE 1. Dimensions (contiflyedj. Fits Shell of Connector A (see note 6 ) B Oash MIL-C- MIL-C- MIL-C- MIL-C- C1amp Mire Bundle No. 81703 26482 5015 83723 Size Acconsnodation Style ~. 125 Ranqe Ser 3 Ser 2 Crimp Ser 111 M in Max c O Oia Ref Max 31 32 1.437 1.875 1 2.415 1.830 2.719 32 16 .625 .937 1 2.770 1.156 2.969 33 24 1.000 1.375 1 2.770 1.500 2.969 34 32 1.437 1.875 1 2.415 1.830 2.969 35 16 .625 .937 1 2.770 1.156 3.219 36 24 1.000 1.375 1 2.770 1.500 3.219 37 32 1.437 1.875 1 2.415 1.830 3.215 12 .500 .750 1 2.380 1.059 1.653 20 .875 1.184 1 2.025 1.375 1.653 10 .350 .625 1 2.100 1.027 1.112 38 61 39 40 19 16 16,16s 16 V Thread Class 2A I 31 1 2.566 ! 32 I 2.566 1. 33 I 2.566 34 2.566 35 2.566 36 2.566 37 2.566 R- 1.166 1= F Max 4.14 2.500-16 UN H Max G Oia Max - ! 4.69 1.4375-18 UNEF I 3.88 I - I 4.43 1.000-20 UNEF I 1.66 I - I 2.05 1.166 .926 .-. ..+ 5 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. MIL-C-85049/24A TABLE 1. Dimensions (continued). Fits Shell of Connector A (see note 6 ) 8 )ash MIL-C- MIL-C- MIL-C- MIL-C- C1 amp Wire Bundle 83723 Size Accomnodati on Style 3.125 No. 81703 26482 5015 Range Ser 3 Ser 2 Crimp Ser III Ml n Max 41 27 18 18 42 43 37 20 20 20 44 22 22 24 .312 1 2.270 6 .250 .437 1 2.270 6 .250 .437 1 2.270 4 .125 .312 1 2.380 6 .250 .437 1 2.380 24 10 .350 .625 1 2.380 47 36 12 .500 .750 1 2.770 48 40 12 .500 .750 1 2.770 49 50 . 24 .125 22 45 46 4 18 12 10 10s, 10SL 10 6 .250 .437 2 1.940 14 14,14s 14 12 .500 .750 2 2.270 c z Ref .027 1.218 .027 1.345 .027 1.468 .027 1.468 .027 1.593 .059 2.469 +.059 2.719 .027 .734 .059 .984 + H Max 1.80 - 2.19 .750-20 UNEF 1.80 - 2.19 1.016 .750-20 UNEF 1.80 2.19 44 1.166 .625-24 UNEF 2.11 2.50 45 1.166 .750-20 UNEF 2.11 2.50 46 1.166 1.000-20 UNEF 2.11 2.50 47 1.816 1.1875-18 UNEF 3.13 3.68 48 1.816 1.1875-18 UNEF 3.88 49 1.381 .750-20 UNEF 2.03 .858 2.42 50 1.766 1.1875-18 UNEF 2.61 1.218 3.00 E 3.125 41 1.016 .625-24 UNEF 42 1.016 43 - -: 6 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. Max `.027 1.218 G Dia Max F Max V Thread Class 2A Oash No. O Dia 4.43 MIL-C-85049124A TABLE 1. Dimensions (continued). Fits Shel 1 of Connector A (see note 6 ) B Oash MIL-C- MIL-C- MIL-C- MIL-C- C1 amp Wire Bundle No. 81703 26482 5015 83723 Size Acconsnodation Style +.125 Ranqe Ser 3 Ser 2 Crimp Ser III MI n Max c O Oia Ref Max 51 19 16 16,16s 16 16 .625 .937 2 2.380 .156 1.112 52 27 18 18 18 12 .500 .750 1 2.270 .059 1.218 53 61 16 .625 .937 1 2.025 .156 1.863 12 .500 .750 1 2.270 .059 1.345 55 20 .875 1.250 2 2.550 .375 1.345 56 10 .350 .625 1 2.380 .027 1.468 16 .625 .937 1 2.380 .156 1.468 20 .875 1.250 2 2.550 .375 1.468 16 .625 .937 1 2.380 .156 1.593 12 .500 .750 1 2.550 .059 1.969 54 37 20 57 20 22 20 22 58 59 24 60 28 Dash No. E 3.125 51 1.916 52 24 V Thread Class 2A F Max G Dia Max H Max 1.4375-18 UNEF 2.87 1.468 3.26 1.016 1.1875-18 UNEF 1.86 - 2.25 53 1.166 1.4375-18 UNEF 2.14 - 2.53 54 1.016 1.1875-18 UNEF 1.86 - 2.25 55 2.016 1.750-18 UNS 3.14 1.969 3.53 56 1.166 1.000-20 UNEF 2.11 - 2.50 57 1.166 1.4375-18 UNEF 2.12 -" 2.51 58 2.016 1.750-18 UNS 3.14 1.969 3.53 59 1.166 1.4375-18 UNEF 2.14 -- 2.53 60 1.266 1.1875-18 UNEF 2.33 -. 2.88 ,. . ... .Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. MIL-C-85049/24A TABLE 1. I ] Dimensions (continued). Fits Shel 1 of Connector b note 6 ] .875 1.250 A (see Oash MIL-CNo. 81703 Ser 3 IL-C6482 er 2 lIL-C- !IL-C- ;lamp Wire Bundle )3723 015 Size Accommodate on Ran e rimp ;er III I 61 28 62 32 20 In I Max B Style +.125 D Dia Ref Max I 1 I 2.550 1.375 1.969 1 3-1%--R 1 -- 63 36 64 65 28 66 1 * 1 RI-%-k% 1 * 40 11.250 I 1.625 ] 67 1 2.77011.78112.719 1 -- 44 68 1 69 [ c * %1-%-1 1 -- 48 70 1 , 1 F Max Oash No. E +.125 -- V Thread Class 2A 61 1.266 1.750-18 UNS 2.39 62 I 1.616 I 2.000-18 UNS I 2.86 63 I 1.816 I 1.750-18 UNS I 3.13 64 1.816 2.250-16 UN 3.27 65 2.566 1.750-18 UNS 3.88 G Oia H Max =-lMax 2.94 - I 3.41 +-l-= - I 4.43 66 I 2.566 I 2.250-16 UN I 4.02 I 4.57 67 [ 2.566 I 1.750-18 UNS I 3.88 I 4.43 68 I 2.566 I 2.250-16 UN I 4.02 I 4.57, I 4.57 69 2.566 1.750-18 UNS 3.88 70 2.566 2.250-16 UN 4.02 8 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. MIL-C-85049/24A Dimensions (continued). TABLE 1. ] Fits Shell =7=lc1am 3!!!E B Oash MIL-C- MIL-CNo. 81703 26482 5015 Ser 3 Ser 2 83723 12.12S] 73 74 75 12 I Accotmnodatlon 10 I .350 1161.6251.93712 24 24 I 14 14,14s 16,16s Oash No. E ~. 125 71 1.686 72 I 24 14 16 20 I .875 4 .125 4 .125 V Thread Class 2A Style *.125 ] .625 ! 18118 16 19 12 Size 11.2501 .312 .312 c Ref I Oia Max 2.100 .02; .858 2.380 .15( .218 2 2.550 .37! .593 1 2.010 .02; .984 1 ?.100 2 -- .02; F Max G Oia Max H Max 1.000-20 UNEF 2.42 1.112 2,81 1.925 1.4375-18 UNEF 2.88 1.468 3.27 73 2.026 1.750-18 UNS 3.15 1.969 3.54 74 .74J .625-24 UNEF 1.31 75 .926 .625-24 UNEF 1.59 1.70 - 9 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. 1.98 .112 MIL-C-85049/24A INCH 0.005 0.010 0.020 0.125 0.250 0.312 0.350 0.375 0.437 0.500 0.541 0.575 0.617 0.625 0.636 0.641 0.669 0.734 0.741 0.750 0.858 0.875 0.904 0.926 0.937 0.984 1.000 1.016 1.027 1.029 1.059 1.090 1.112 1.144 1.156 1.166 1.180 1.184 nml INCH 0.13 0.25 0.51 3.18 6.35 7.92 8.89 9.53 11.10 12.70 13.74 14.60 15.67 15.88 16.15 16.28 16.99 18.64 18.82 19.05 21.79 22.22 22.96 23.52 23.80 24.99 25.40 25.81 26.09 26.14 26.90 27.69 28.24 29.06 29.36 29.62 29.97 30.07 1.1875 1.200 1.218 1.250 1.266 .270 .280 .310 .320 .335 .345 .370 .375 .380 .381 .386 .437 .4375 .468 .470 .480 .500 .570 .590 .593 .616 .625 .640 .653 .655 .660 .686 .690 .700 .745 .750 .760 .766 n!nl 30.16 30.48 30.94 31.75 32.16 32.26 32.51 33.27 33.53 33.91 34.16 34.80 34.93 35.05 35.08 35.20 36.50 36.51 37.29 37.34 37.59 38.10 39.88 40.39 40.46 41.05 41.28 41.66 41.99 42.04 42.16 42.82 42.92 43.18 44.32 44.45 44.70 44.86 INCH 1.770 1.781 1.800 1.816 1.840 1.860 1.916 1.920 1.925 1.940 1.969 1.970 1.980 2.000 2.010 2.016 2.025 2.026 2.030 2.050 2.100 2.110 2.120 2.140 2.150 2.190 2.195 2.219 2.250 2.270 2.290 2.360 2.410 2.415 2.420 2.445 2.469 2.500 111111 44.96 45.24 45.72 46.13 46.74 47.24 48.67 48.77 48.89 49.28 50.01 50.04 50.29 50.80 51.05 51.21 51.43 51.46 51.56 52.07 53.34 53.59 53.85 54.36 54.61 55.62 55.75 56.36 57.15 57.66 58.17 59.94 61.21 61.34 61.47 62.10 62.71 63.50 10 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. INCH 2.510 2.550 2.566 2.610 2.680 2.719 2.770 2.800 2.810 2.860 2.870 2.880 2.940 2.969 3.000 3.060 3.070 3.130 3.140 3.150 3.219 3.250 3.260 3.270 3.390 3.410 3.530 3.540 3.620 3.680 3.820 3.880 3.940 4.020 4.140 4.430 4.570 4.690 nun 63.75 64.77 65.18 66.29 68.07 69.06 70.36 71.12 71.37 72.64 72.90 73.15 74.67 75.41 76.20 77.72 77.98 79.50 79.76 80.01 81.76 82.55 82.80 83.06 86.11 86.61 89.66 89.91 91.94 93.47 97.03 98.55 100.08 102.11 105.16 112.52 116.07 119.12 MIL-C-85049/24A REQUIREMENTS: 1. 2. Oesign and construction: a. Dimensions and configuration: b. Interface dimensions shal 1 conform to MIL-C-85049 figure 4. c. Figure 1 consists of a coupling nut and follower. The coupling nut shal 1 be captivated to and free to rotate on the fol lower. See figure 1 and table [. Material and finish: a. Accessory components shall be as shown in table 1. b. Clamp assembly screws - Corrosion resistant steel in accordance with MIL-C-85049, passivated per QQ-P-35. 3. Qualification: See MIL-C-85049, category 3A. Information pertaining to qualification of products may be obtained from the Commanding Officer, Naval Avionics Center, Attention: Code 8/444, bOOO East 21st Street, Indianapolis, IN 46219-2189. 4. Applications: 5. a. These accessories are for shield termination applications. b. Style 2 applies when the cable diameter exceeds the "E" diameter of the interface dimensions defined in MIL-C-85049 figure 4. c. For assembly instructions see figure 2 of MIL-C-85049/25. Part Number: See example below: 24 M85049/ -lo _ ::;% Finish (see table 11) .. 11 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. MIL-C-85049/24A 6. Supersession data: MS3 188C M85049124 ;; I tt 1 I Dash Number I Finish Old -- New -- A w w c Material and finish. TABLE II. Component Material Finish Body Aluminum `al10Y in accordance with MI L-C-85049 Al N, ~/ M Body Corrosion resistant steel in accordance with MIL-C-85049 B, S J/ ~/ Not for Navy use. Restricted to Air Force Space applications only. W finish is not for use in space application. NOTES : 1. Dimensions are in inches. 2. Metric equivalents shall be based upon 1.00 inch = 25.4 mm and shall be in accordance with ASTM E380, paragraph 4.5, Method A and ASTM E29, rounding-off method. 3. Unless otherwise specified, tolerances shall be: +0.301. ~.005: angular, x" = :1"; Xoxxl = -- 4. Dimensions apply after plating. 5. Loosely assembled is defined as the MIL-C-85049/42 clamp tightened to the MIL-C-85049/24 connector accessory body a minimum of two ful 1 thread lengths. 6. "Wire bundle acconnnodation range" dimension is defined as the envelope area for the wire bundle. This dimension is not meant to define the clamp hardware 1imits. 7. O-ring is not supplied with style 2. . .XX = ~.01 : .XXX = .: 12 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use. 141 L-C-85049124A Revision letters are not used to denote changes due to the extensiveness of the changes. Custodians: Arno' - CR Navy - AS Air Force - 85 Preparing activity: Navy - AS (Project No. 5935-3729-10) Review activities: Ariny Navy Air - AR, EC Force MI - 11, 99 DLA - ES 13 Source: http://assist.dla.mil -- Downloaded: 2020-03-05T21:06Z Check the source to verify that this is the current version before use.