Order this document by MBRD1035CTL/D SEMICONDUCTOR TECHNICAL DATA DPAK Power Surface Mount Package . . . employing the Schottky Barrier principle in a large area metal-to-silicon power diode. State of the art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies, free wheeling diode and polarity protection diodes. * * * * * * * SCHOTTKY BARRIER RECTIFIER 10 AMPERES 35 VOLTS 4 Highly Stable Oxide Passivated Junction Guardring for Stress Protection Matched dual die construction - May be Paralleled for High Current Output High dv/dt Capability Short Heat Sink Tap Manufactured - Not Sheared Very Low Forward Voltage Drop Epoxy Meets UL94, VO at 1/8" Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 0.4 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds * Shipped in 75 units per plastic tube * Available in 16 mm Tape and Reel, 2500 units per Reel, Add "T4'' to Suffix part # * Marking: B1035CL 1 3 CASE 369A-13 DPAK 1 4 3 MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 115C) Per Leg Per Package Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 115C) Per Leg Non-Repetitive Peak Surge Current Per Package (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR, TJ = 25C) Symbol Value Unit VRRM VRWM VR 35 Volts IO 5 10 Amps IFRM 10 Amps IFSM 50 Amps Tstg, Tc -55 to +125 C TJ -55 to +125 C dv/dt 10,000 V/s THERMAL CHARACTERISTICS Thermal Resistance - Junction to Case Per Leg RJC 2.43 C/W Thermal Resistance - Junction to Ambient (1) Per Leg RJA 68 C/W (1) Rating applies when using minimum pad size, FR4 PC Board SWITCHMODE is a trademark of Motorola, Inc. This document contains information on a new product. Specifications and information herein are subject to change without notice. Rectifier Device Data Motorola, Inc. 1998 1 MBRD1035CTL ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage(2), see Figure 2 IF = 5 Amps, TJ = 25C IF = 5 Amps, TJ = 100C IF = 10 Amps, TJ = 25C IF = 10 Amps, TJ = 100C Per Leg Maximum Instantaneous Reverse Current, see Figure 4 (VR = 35 V, TJ = 25C) (VR = 35 V, TJ = 100C) (VR = 17.5 V, TJ = 25C) (VR = 17.5 V, TJ = 100C) Per Leg VF Volts 0.47 0.41 0.56 0.55 IR mA 2.0 30 0.20 5.0 (2) Pulse Test: Pulse Width 250 s, Duty Cycle 2.0%. I F, INSTANTANEOUS FORWARD CURRENT (AMPS) I F, INSTANTANEOUS FORWARD CURRENT (AMPS) TYPICAL CHARACTERISTICS 100 TJ = 125C 10 TJ = 100C TJ = 25C TJ = - 40C 1.0 0.1 0.10 0.30 0.50 0.70 0.90 1.10 100 TJ = 125C 10 TJ = 25C 1.0 TJ = 100C 0.1 0.10 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) I R , MAXIMUM REVERSE CURRENT (AMPS) I R , REVERSE CURRENT (AMPS) 0.70 0.90 1.10 Figure 2. Maximum Forward Voltage Per Leg 1E+0 1E+0 100E-3 100E-3 TJ = 125C 10E-3 1E-3 TJ = 100C 100E-6 TJ = 25C 10E-6 0 10 20 VR, REVERSE VOLTAGE (VOLTS) TJ = 125C 10E-3 TJ = 100C 1E-3 100E-6 30 Figure 3. Typical Reverse Current Per Leg 2 0.50 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Per Leg 1E-6 0.30 35 TJ = 25C 10E-6 1E-6 0 10 20 VR, REVERSE VOLTAGE (VOLTS) 30 35 Figure 4. Maximum Reverse Current Per Leg Rectifier Device Data PFO , AVERAGE POWER DISSIPATION (WATTS) I O , AVERAGE FORWARD CURRENT (AMPS) MBRD1035CTL 8.0 dc 7.0 SQUARE WAVE (50% DUTY CYCLE) 6.0 5.0 Ipk/Io = p 4.0 Ipk/Io = 5 3.0 Ipk/Io = 10 2.0 Ipk/Io = 20 1.0 freq = 20 kHz 0 0 20 40 60 80 100 120 4.0 SQUARE WAVE (50% DUTY CYCLE) 3.5 3.0 Ipk/Io = p 2.5 Ipk/Io = 5 Ipk/Io = 10 2.0 1.5 Ipk/Io = 20 1.0 0.5 0 0 140 1.0 1000 C, CAPACITANCE (pF) TJ = 25C 100 10 10 15 3.0 4.0 5.0 6.0 7.0 8.0 Figure 6. Forward Power Dissipation Per Leg TJ , DERATED OPERATING TEMPERATURE ( C) Figure 5. Current Derating Per Leg 5 2.0 IO, AVERAGE FORWARD CURRENT (AMPS) TL, LEAD TEMPERATURE (C) 0 dc 20 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance Per Leg 25 125 RqJA = 2.43C/W 115 RqJA = 25C/W 105 RqJA = 48C/W 95 RqJA = 67.5C/W 85 RqJA = 84C/W 75 65 0 5 10 15 20 25 30 35 VR, DC REVERSE VOLTAGE (VOLTS) Figure 8. Typical Operating Temperature Derating Per Leg * * Reverse power dissipation and the possibility of thermal runaway must be considered when operating this device under any reverse voltage conditions. Calculations of TJ therefore must include forward and reverse power effects. The allowable operating TJ may be calculated from the equation: TJ = TJmax - r(t)(Pf + Pr) where r(t) = thermal impedance under given conditions, Pf = forward power dissipation, and Pr = reverse power dissipation This graph displays the derated allowable TJ due to reverse bias under DC conditions only and is calculated as TJ = TJmax - r(t)Pr, where r(t) = Rthja. For other power applications further calculations must be performed. Rectifier Device Data 3 r (t) , TRANSIENT THERMAL RESISTANCE (NORMALIZED MBRD1035CTL 1.0 50%(DUTY CYCLE) 20% 10% 0.1 5.0% 2.0% 1.0% SINGLE PULSE 0.01 0.00001 0.0001 Rtjl(t) = Rtjl * r(t) 0.001 0.01 0.1 10 1.0 100 1000 t, TIME (s) r (t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 9. Thermal Response Junction to Case (Per Leg) 1.0E+00 50% (DUTY CYCLE) 20% 1.0E-01 1.0E-02 10% 5.0% 2.0% 1.0% 1.0E-03 SINGLE PULSE 1.0E-04 0.00001 0.0001 Rtjl(t) = Rtjl * r(t) 0.001 0.01 0.1 1.0 10 100 1000 10000 t, TIME (s) Figure 10. Thermal Response Junction to Ambient (Per Leg) 4 Rectifier Device Data MBRD1035CTL PACKAGE DIMENSIONS -T- C B V E R 4 Z A S 1 2 3 U K F J L H D G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE 2 PL 0.13 (0.005) M DIM A B C D E F G H J K L R S U V Z INCHES MIN MAX 0.235 0.250 0.250 0.265 0.086 0.094 0.027 0.035 0.033 0.040 0.037 0.047 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.175 0.215 0.020 0.050 0.020 --- 0.030 0.050 0.138 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.84 1.01 0.94 1.19 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.45 5.46 0.51 1.27 0.51 --- 0.77 1.27 3.51 --- T CASE 369A-13 ISSUE Y Rectifier Device Data 5 MBRD1035CTL Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shagawa-ku, Tokyo, Japan. 03-5487-8488 Customer Focus Center: 1-800-521-6274 Mfax: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ 6 MBRD1035CTL/D Rectifier Device Data