RMB2S - RMB4S Miniature Glass Passivated Fast Recovery Surface Mount Bridge Rectifier PRV : 200 - 400 Volts Io : 0.5 Ampere MBS 0.029(0.74) 0.017(0.43) FEATURES : * Glass passivated chip junctions. * High surge overload rating : 35A peak * Saves space on printed circuit boards. * High temperature soldering guaranteed : 260 oC/10 seconds. * Pb / RoHS Free MECHANICAL DATA : * Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Terminals : Plated Lead solderable per MIL-STD-750, Method 2026 * Polarity : Polarity symbols marked on body * Mounting position : Any * Weight : 0.22 gram 0.161(4.10) 0.144(3.65) ~ 0.272(6.90) 0.252(6.40) ~ 0.105(2.67) 0.095(2.41) 0.205(5.21) 0.195(4.95) 0.195(4.95) 0.179(4.55) 0.106(2.70) 0.094(2.40) 0.114(2.90) 0.094(2.40) 0.016(0.41) 0.006(0.15) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25C ambient temperature unless otherwise specified. 60 Hz, resistive or inductive load. RATING Device Marking Code Maximum Repetitive Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Rectified Current (See Fig.1) Maximum Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3 ms.) Maximum Instantaneous Forward Voltage per element at IF = 0.4 A Maximum DC Reverse Current Ta = 25C at Rated DC Blocking Voltage Ta = 125C Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical Junction Capacitance per element Typical Thermal Resistance Junction and Storage Temperature Range SYMBOL RMB2S 2R 4R VRRM VRMS VDC 200 140 200 400 280 400 V V V IF(AV) 0.5 (1) (on glass-epoxy P.C.B.) 0.8 (2) (on aliminum substrate) A IFSM 30 A I2t 5.0 A 2S VF 1.25 V IR IR(H) Trr Cj 5.0 100 150 A A ns pF C/W C RJA TJ, TSTG RMB4S 13 (3) 85 (1) -55 to + 150 UNIT Notes : (1) On glass epoxy P.C Board mounted on 0.5" x 0.5" (13mm x 13mm) Pads. (2) On aluminum substrate P.C.B. with an area 0.8" x 0.8" (20mm x 20mm) mounted on 0.5" x 0.5" (13mm x 13mm) Pads. (3) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC Page 1 of 2 Rev. 02 : March 24, 2005 RATING AND CHARACTERISTIC CURVES ( RMB2S - RMB4S ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER BRIDGE ELEMENT 35 1.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT Aluminum Substrate 0.8 0.6 0.4 Glass Epoxy P.C.B. 0.2 28 21 Ta = 40C 14 Single Half Sine-Wave (JEDEC Method) 7 Resistive or Inductive Load 0 0 25 50 75 100 125 150 0 175 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE, (C) FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 1 Pulse Width = 300 s 1% Duty Cycle 0.1 TJ = 25C 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ = 125C 10 1.0 TJ = 25C 0.1 FORWARD VOLTAGE, VOLTS 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Page 2 of 2 Rev. 02 : March 24, 2005