SPECIFICATION
Supplier : Samsung electro-mechanics
Samsung P/N : CL31C3R3CBCNNNC
Product : Multi-layer Ceramic Capacitor
Description : CAP, 3.3
, 50V, ±0.25
, C0G, 1206
CL 31 C 3R3 C B C N N N C
Series Samsung Multi-layer Ceramic Capacitor
Size 1206 (inch code) L: 3.2 ± 0.15 mm W: ± 0.15 mm
Dielectric C0G
Inner electrode
Capacitance 3.3 Termination
Capacitance ±0.25 Plating (Pb Free)
tolerance
Product Normal
Rated Voltage 50 V
Special Reserved for future use
Thickness 0.85 ± 0.15 mm
Packaging Cardboard Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance Within specified tolerance 1±10% 0.5~5Vrms
Q466 min
Insulation 10,000Mohm or 500MohmRated Voltage 60~120 sec.
Resistance Whichever is Smaller
Appearance No abnormal exterior appearance Microscope (×10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature C0G
Characterisitcs (From -55 to 125, Capacitance change shoud be within ±30PPM/)
Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : Bending to the limit (1mm)
within ±5% or ±0.5 whichever is larger with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5, 3±0.3sec.
(preheating : 80~120 for 10~30sec.)
Resistance to Capacitance change : Solder pot : 270±5, 10±1sec.
Soldering heat within ±2.5% or ±0.25 whichever is larger
Tan δ, IR : initial spec.
Sn 100%
Cu
Ni
1.6
Performance Test condition
300%
A. Samsung Part Number
Vibration Test Capacitance change : Amplitude : 1.5mm
within ±2.5% or ±0.25 whichever is larger From 10 to 55 (return : 1min.)
Tan δ, IR : initial spec. 2hours × 3 direction (x, y, z)
Moisture Capacitance change : With rated voltage
Resistance within ±7.5% or ±0.75 whichever is larger 40±2, 90~95%RH, 500+12/-0hrs
Q : 111 min
IR : 500Mohm or 25Mohm
High Temperature Capacitance change :
With
of the rated voltage
Resistance within ±3% or ±0.3 whichever is larger Max. operating temperature
Q : 233 min 1000+48/-0hrs
IR : 1000Mohm or 50Mohm
Temperature Capacitance change : 1 cycle condition
Cycling within ±2.5% or ±0.25 whichever is larger
Min. operating temperature
25
Tan δ, IR : initial spec. Max. operating temperature 25
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
Whichever is Smaller
Whichever is Smaller
Performance Test condition
200%