SA5.0 thru SA170CA Vishay Semiconductors formerly General Semiconductor TRANSZORB(R) Transient Voltage Suppressors Stand Off Voltage 5.0 to 170V Peak Pulse Power 500W D0-204AC (DO-15) Features 0.034 (0.86) 0.028 (0.71) Dia. * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * Excellent clamping capability * Low incremental surge resistance * Very fast response time * 500W peak pulse power surge capability with a 10/100s waveform, repetition rate (duty cycle): 0.01% * High temperature soldering guaranteed: 265C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension 1.0 (25.4) min. 0.300 (7.6) 0.230 (5.8) Mechanical Data 0.140 (3.6) 0.104 (2.6) Dia. Case: JEDEC DO-204AC molded plastic body over passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.015 oz., 0.4 g Packaging Codes - Options (Antistatic): 51 - 1K per Bulk box, 10K/carton 54 - 4K per 13" paper Reel (52mm horiz. tape), 12K/carton 73 - 2K per horiz. tape & Ammo box, 20K/carton 1.0 (25.4) min. Dimensions in inches and (millimeters) Devices for Bidirectional Applications For bidirectional use C or CA suffix. (e.g. SA5.0C, SA170CA). Electrical characteristics apply in both directions. Maximum Ratings and Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symbol Value Unit PPPM 500 (min.) W IPPM See Next Table A PM(AV) 3.0 W IFSM 70 A Maximum instantaneous forward voltage at 35A for unidirectional only VF 3.5 V Operating junction and storage temperature range TJ, TSTG -55 to +175 C Peak pulse power dissipation with a 10/1000s waveform(1) (Fig. 1) Peak pulse current with a 10/1000s waveform (Note 1) Steady state power dissipation at TA = 75C lead lengths, 0.375" (9.5mm)(2) Peak forward surge current, 10ms single half sine-wave unidirectional only Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25C per Fig. 2. (2) Mounted on copper pad area of 1.6 x 1.6" (40 x 40mm) per Fig. 5. (3) 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Document Number 88378 22-Feb-02 www.vishay.com 1 SA5.0 thru SA170CA Vishay Semiconductors formerly General Semiconductor Electrical Characteristics (TA=25C unless otherwise noted) Breakdown Voltage V(BR) at IT (1) (V) Stand-off Voltage VWM (V) Maximum Reverse Leakage at VWM ID (3) (A) Maximum Peak Pulse Current IPPM(2) (A) Maximum Clamping Voltage at IPPM VC (V) Maximum Temperature Coefficient of V(BR) (mV / C) 5.0 Device Type MIN MAX Test Current IT (mA) SA5.0 6.40 7.30 10 5.0 600 52.1 9.6 SA5.0A(4) 6.40 7.07 10 5.0 600 54.3 9.2 5.0 SA6.0 6.67 8.15 10 6.0 600 43.9 11.4 5.0 SA6.0A 6.67 7.37 10 6.0 600 48.5 10.3 5.0 SA6.5 7.22 8.82 10 6.5 400 40.7 12.3 5.0 SA6.5A 7.22 7.98 10 6.5 400 44.7 11.2 5.0 SA7.0 7.78 9.51 10 7.0 150 37.6 13.3 6.0 SA7.0A 7.78 8.60 10 7.0 150 41.7 12.0 6.0 SA7.5 8.33 10.2 1.0 7.5 50 35.0 14.3 7.0 SA7.5A 8.33 9.21 1.0 7.5 50 38.8 12.9 7.0 SA8.0 8.89 10.9 1.0 8.0 25 33.3 15.0 7.0 SA8.0A 8.89 9.83 1.0 8.0 25 36.8 13.6 7.0 SA8.5 9.44 11.5 1.0 8.5 10 31.4 15.9 8.0 SA8.5A 9.44 10.4 1.0 8.5 10 34.7 14.4 8.0 SA9.0 10.0 12.2 1.0 9.0 5.0 29.6 16.9 9.0 SA9.0A 10.0 11.1 1.0 9.0 5.0 32.5 15.4 9.0 SA10 11.1 13.6 1.0 10.0 1.0 26.6 18.8 10.0 SA10A 11.1 12.3 1.0 10.0 1.0 29.4 17.0 10.0 SA11 12.2 14.9 1.0 11.0 1.0 24.9 20.1 11.0 SA11A 12.2 13.5 1.0 11.0 1.0 27.5 18.2 11.0 SA12 13.3 16.3 1.0 12.0 1.0 22.7 22.0 12.0 SA12A 13.3 14.7 1.0 12.0 1.0 25.1 19.9 12.0 SA13 14.4 17.6 1.0 13.0 1.0 21.0 23.8 13.0 SA13A 14.4 15.9 1.0 13.0 1.0 23.3 21.5 13.0 SA14 15.6 19.1 1.0 14.0 1.0 19.4 25.8 14.0 SA14A 15.6 17.2 1.0 14.0 1.0 21.6 23.2 14.0 SA15 16.7 20.4 1.0 15.0 1.0 18.6 26.9 16.0 SA15A 16.7 18.5 1.0 15.0 1.0 20.5 24.4 16.0 SA16 17.8 21.8 1.0 16.0 1.0 17.4 28.8 19.0 SA16A 17.8 19.7 1.0 16.0 1.0 19.2 26.0 17.0 SA17 18.9 23.1 1.0 17.0 1.0 16.4 30.5 20.0 SA17A 18.9 20.9 1.0 17.0 1.0 18.1 27.6 19.0 SA18 20.0 24.4 1.0 18.0 1.0 15.5 32.2 21.0 SA18A 20.0 22.1 1.0 18.0 1.0 17.1 29.2 20.0 SA20 22.2 27.1 1.0 20.0 1.0 14.0 35.8 25.0 SA20A 22.2 24.5 1.0 20.0 1.0 15.4 32.4 23.0 SA22 24.4 29.8 1.0 22.0 1.0 22.7 39.4 28.0 SA22A 24.4 26.9 1.0 22.0 1.0 14.1 35.5 25.0 SA24 26.7 32.6 1.0 24.0 1.0 11.6 43.0 31.0 SA24A 26.7 29.5 1.0 24.0 1.0 12.9 38.9 28.0 SA26 28.9 35.3 1.0 26.0 1.0 10.7 46.6 31.0 SA26A 28.9 31.9 1.0 26.0 1.0 11.9 42.1 30.0 SA28 31.1 38.0 1.0 28.0 1.0 10.0 50.1 35.0 SA28A 31.1 34.4 1.0 28.0 1.0 11.0 45.4 31.0 SA30 33.3 40.7 1.0 30.0 1.0 9.3 53.5 39.0 SA30A 33.3 36.8 1.0 30.0 1.0 10 48.4 36.0 SA33 36.7 44.9 1.0 33.0 1.0 8.5 59.0 42.0 SA33A 36.7 40.6 1.0 33.0 1.0 9.4 53.3 39.0 SA36 40.0 48.9 1.0 36.0 1.0 7.8 64.3 46.0 SA36A 40.0 44.2 1.0 36.0 1.0 8.6 58.1 41.0 SA40 44.4 54.3 1.0 40.0 1.0 7.0 71.4 51.0 SA40A 44.4 49.1 1.0 40.0 1.0 7.8 64.5 46.0 www.vishay.com 2 Document Number 88378 22-Feb-02 SA5.0 thru SA170CA Vishay Semiconductors formerly General Semiconductor Electrical Characteristics (TA=25C unless otherwise noted) Breakdown Voltage V(BR) at IT (1) (V) Test Current IT (mA) Stand-off Voltage VWM (V) Maximum Reverse Leakage at VWM ID (3) (A) Maximum Peak Pulse Current IPPM(2) (A) Maximum Clamping Voltage at IPPM VC (V) Maximum Temperature Coefficient of V(BR) (mV / C) Device Type MIN MAX SA43 47.8 58.4 1.0 43.0 1.0 6.5 76.7 55.0 SA43A 47.8 52.8 1.0 43.0 1.0 7.2 69.4 50.0 SA45 50.0 61.1 1.0 45.0 1.0 6.2 80.3 58.0 SA45A 50.0 55.3 1.0 45.0 1.0 6.9 72.7 52.0 SA48 53.3 65.2 1.0 48.0 1.0 5.8 85.5 63.0 SA48A 53.3 58.9 1.0 48.0 1.0 6.5 77.4 56.0 SA51 56.7 69.3 1.0 51.0 1.0 5.5 91.1 66.0 SA51A 56.7 62.7 1.0 51.0 1.0 6.1 82.4 61.0 SA54 60.0 73.3 1.0 54.0 1.0 5.2 96.3 71.0 SA54A 60.0 66.3 1.0 54.0 1.0 5.7 87.1 65.0 SA58 64.4 78.7 1.0 58.0 1.0 4.9 103 78.0 SA58A 64.4 71.2 1.0 58.0 1.0 5.3 93.6 70.0 SA60 66.7 81.5 1.0 60.0 1.0 4.7 107 80.0 SA60A 66.7 73.7 1.0 60.0 1.0 5.2 96.8 71.0 SA64 71.1 86.9 1.0 64.0 1.0 4.4 114 86.0 SA64A 71.1 78.6 1.0 64.0 1.0 4.9 103 76.0 SA70 77.8 95.1 1.0 70.0 1.0 4.0 125 94.0 SA70A 77.8 86.0 1.0 70.0 1.0 4.4 113 85.0 SA75 83.3 102 1.0 75.0 1.0 3.7 134 101 SA75A 83.3 92.1 1.0 75.0 1.0 4.1 121 91.0 SA78 86.7 106 1.0 78.0 1.0 3.6 139 105 SA78A 86.7 95.8 1.0 78.0 1.0 4.0 126 95.0 SA85 94.4 115 1.0 85.0 1.0 3.3 151 114 SA85A 94.4 104 1.0 85.0 1.0 3.6 137 103 SA90 100 122 1.0 90.0 1.0 3.1 160 121 SA90A 100 111 1.0 90.0 1.0 3.4 146 110 SA100 111 136 1.0 100 1.0 2.8 179 135 SA100A 111 123 1.0 100 1.0 3.1 162 123 SA110 122 149 1.0 110 1.0 2.6 196 148 SA110A 122 135 1.0 110 1.0 2.8 177 133 SA120 133 163 1.0 120 1.0 2.3 214 162 SA120A 133 147 1.0 120 1.0 2.6 193 146 SA130 144 176 1.0 130 1.0 2.2 230 175 SA130A 144 159 1.0 130 1.0 2.4 209 158 SA150 167 204 1.0 150 1.0 1.9 268 203 SA150A 167 185 1.0 150 1.0 2.1 243 184 SA160 178 218 1.0 160 1.0 1.7 257 217 SA160A 178 197 1.0 160 1.0 1.9 259 196 SA170 189 231 1.0 170 1.0 1.6 304 230 SA170A 189 209 1.0 170 1.0 1.8 275 208 Notes: (1) (2) (3) (4) (5) Pulse test: tp 50ms Surge current waveform per Fig. 3 and derate per Fig. 2 For bidirectional types with VWM of 10 Volts and less, the ID limit is doubled For the bidirectional SA5.0CA, the maximum VBR is 7.25V All terms and symbols are consistent with ANSI/IEEE C62.35 Document Number 88378 22-Feb-02 www.vishay.com 3 SA5.0 thru SA170CA Vishay Semiconductors formerly General Semiconductor PPPM -- Peak Pulse Power (kW) Fig. 1 - Peak Pulse Power Rating Curve 30 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25C 10 Impulse Exponential Decay PPK".5" td 1.0 PPK Half Sine td td = 7 tp PPK Square td Current Waveforms 0.1 0.1s 1.0s 10s 100s 1.0ms td -- Pulse Width 10ms Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 - Pulse Derating Curve 100 75 50 25 0 0 100 125 150 175 200 200 TJ = 25C Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM tr = 10sec. Peak Value IPPM 100 100 Half Value -- IPP 2 IPPM 50 10/1000sec. Waveform as defined by R.E.A. td 10 1.0 0 8.3ms Single Half Sine-Wave (JEDEC Method) IFSM -- Peak Forward Surge Current (A) IPPM -- Peak Pulse Current, % IRSM 75 Fig. 4 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 150 2.0 3.0 4.0 1 t -- Time (ms) Fig. 5 - Steady State Power Derating Curve 4.0 10 Number of Cycles at 60 Hz 100 Fig. 6 - Capacitance 10,000 3.0 L = 0.375" (9.5mm) Lead Lengths 2.0 1.0 1.6 x 1.6 x .040" (40 x 40 x 1mm) Copper Heat Sinks 0 0 www.vishay.com 4 25 50 75 100 125 150 175 200 TL -- Lead Temperature (C) CJ -- Capacitance (pF) PM(AV), Steady State Power Dissipation (W) 50 TA -- Ambient Temperature (C) Fig. 3 - Pulse Waveform 0 25 Unidirectional Bidirectional VR = 0 1,000 TJ = 25C f = 1MHZ Vsig = 50mVp-p 100 VR = Rated Stand-off voltage 10 5 500 100 VWM -- Reverse Stand-off Voltage (V) Document Number 88378 22-Feb-02 SA5.0 thru SA170CA Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 8 - Incremental Clamping Voltage Curve Unidirectional Fig. 7 - Incremental Clamping Voltage Curve Unidirectional 100 Waveform: 8 x 20 Impulse VC = VC - V(BR) SA110 SA170 SA70 SA54 SA40 10 SA30 SA24 SA18 SA15 1.0 SA12 SA5.0 SA9.0 0.1 0.5 1 10 IPP, Peak Pulse Current (A) SA70 SA40 10 SA24 SA15 SA9.0 SA5.0 1.0 1 10 IPP, Peak Pulse Current (A) 50 Fig. 10 - Incremental Clamping Voltage Curve Bidirectional 100 100 SA170 SA70 SA60 10 SA40 SA30 SA24 SA15 SA9.0 SA6.5 1.0 1 10 IPP, Peak Pulse Current (A) Document Number 88378 22-Feb-02 Waveform: 10 x 1000 Impulse VC = VC - V(BR) SA110 VC, Incremental Clamping Voltage Waveform: 8 x 20 Impulse VC = VC - V(BR) VC, Incremental Clamping Voltage SA110 0.1 0.5 50 Fig. 9 - Incremental Clamping Voltage Curve Bidirectional 0.1 0.5 Waveform: 10 x 1000 Impulse VC = VC - V(BR) SA170 VC, Incremental Clamping Voltage VC, Incremental Clamping Voltage 100 50 SA170 SA110 SA70 10 SA40 SA24 SA15 SA9.0 1.0 0.1 0.5 SA6.5 1 10 50 IPP, Peak Pulse Current (A) www.vishay.com 5 SA5.0 thru SA170CA Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 11 - Typical Instantaneous Forward Voltage IF Forward Current (A) 100 TJ = 25C Pulse Width = 300s 1% Duty Cycle 20 10 2 1 0.2 0.1 Unidirectional (only) 0 0.5 1 1.5 2 VF, Forward Voltage (V) 2.5 V, Temperature Coefficient (mV/C) Fig. 12 - Breakdown Voltage Temperature Coefficient Curve 200 100 Unidirectional Bidirectional 10 1.0 5.0 www.vishay.com 6 100 10 VWM, Rated Stand-Off Voltage (V) 500 Document Number 88378 22-Feb-02 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1