4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M 6-Pin DIP General Purpose Photodarlington Optocoupler Features Description High Sensitivity to Low Input Drive Current The 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, and TIL113M have a gallium arsenide infrared emitter optically coupled to a silicon planar photodarlington. Meets or Exceeds All JEDEC Registered Specifications Safety and Regulatory Approvals: - UL1577, 4,170 VACRMS for 1 Minute DIN-EN/IEC60747-5-5, 850 V Peak Working Insulation Voltage Applications Low Power Logic Circuits Telecommunications Equipment Portable Electronics Solid State Relays Interfacing Coupling Systems of Different Potentials and Impedances Schematic ANODE 1 6 BASE 6 1 CATHODE 2 N/C 3 5 COLLECTOR 4 EMITTER 6 1 6 1 Figure 2. Package Outlines Figure 1. Schematic (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler December 2014 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage Characteristics < 150 VRMS I-IV < 300 VRMS I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol 175 Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 1360 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1594 Vpeak VIORM Maximum Working Insulation Voltage 850 Vpeak VIOTM Highest Allowable Over-Voltage VPR Parameter 6000 Vpeak External Creepage 7 mm External Clearance 7 mm External Clearance (for Option TV, 0.4" Lead Spacing) 10 mm DTI Distance Through Insulation (Insulation Thickness) 0.5 mm TS Case Temperature(1) 175 C IS,INPUT Current(1) 350 mA 800 mW Input PS,OUTPUT Output RIO Power(1) Insulation Resistance at TS, VIO = 500 V(1) > 109 Note: 1. Safety limit values - maximum values allowed in the event of a failure. (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 2 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Value Unit -40 to +125 C TOTAL DEVICE TSTG Storage Temperature Operating Temperature -40 to +100 C Junction Temperature -40 to +125 C 260 for 10 seconds C Total Device Power Dissipation @ TA = 25C 270 mW Derate Above 25C 3.3 mW/C IF Continuous Forward Current 80 mA VR Reverse Voltage 3 V TOPR TJ TSOL PD Lead Solder Temperature EMITTER IF(pk) PD Forward Current - Peak (300 s, 2% Duty Cycle) 3.0 A LED Power Dissipation @ TA = 25C 120 mW Derate above 25C 2.0 mW/C DETECTOR BVCEO Collector-Emitter Breakdown Voltage 30 V BVCBO Collector-Base Breakdown Voltage 30 V BVECO Emitter-Collector Breakdown Voltage 5 V Detector Power Dissipation @ TA = 25C 150 mW Derate Above 25C 2.0 mW/C Continuous Collector Current 150 mA PD IC (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 3 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Absolute Maximum Ratings TA = 25C Unless otherwise specified. Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit 1.2 1.5 V 1.2 1.5 V EMITTER 4NXXM VF Input Forward Voltage(2) IR Reverse Leakage Current(2) C Capacitance(2) IF = 10 mA H11B1M, TIL113M VR = 3.0 V 4NXXM 0.001 100 A VR = 6.0 V H11B1M, TIL113M 0.001 10 A All 150 pF VF = 0V, f = 1.0 MHz 0.8 DETECTOR BVCEO Collector-Emitter Breakdown IC = 1.0 mA, IB = 0 Voltage(2) BVCBO Collector-Base Breakdown Voltage(2) BVECO Emitter-Collector Breakdown IE = 100 A, IB = 0 Voltage(2) ICEO Collector-Emitter Dark Current(2) IC = 100 A, IE = 0 VCE = 10 V, Base Open 4NXXM, TIL113M 30 60 V H11B1M 25 60 V All 30 100 V 4NXXM 5.0 10 V H11B1M, TIL113M 7 10 V All 1 100 nA Notes: 2. Indicates JEDEC registered data. (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 4 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Electrical Characteristics TA = 25C Unless otherwise specified. Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit 4N32M, 4N33M 50 (500) mA (%) 4N29M, 4N30M 10 (100) mA (%) IF = 1 mA, VCE = 5 V H11B1M 5 (500) mA (%) IF = 10 mA, VCE = 1 V TIL113M 30 (300) mA (%) DC CHARACTERISTICS IC(CTR) VCE(SAT) Collector Output Current(3)(4)(5) Saturation Voltage(3)(5) IF = 10 mA, VCE = 10 V, IB = 0 IF = 8 mA, IC = 2.0 mA 4NXXM 1.0 V TIL113M 1.25 V IF = 1 mA, IC = 1 mA H11B1M 1.0 V IF = 200 mA, IC = 50 mA, VCC = 10 V, RL = 100 4NXXM, TIL113M 5.0 s IF = 10 mA, VCE = 10 V, RL = 100 H11B1M AC CHARACTERISTICS ton toff Turn-on Time Turn-off Time IF = 200 mA, IC = 50 mA, VCC = 10 V, RL = 100 IF = 10 mA, VCE = 10 V, RL = 100 BW 25 s 4N32M, 4N33M, TIL113M 100 s 4N29M, 4N30M 40 s H11B1M Bandwidth(6)(7) 18 s 30 kHz Notes: 3. Indicates JEDEC registered data. 4. The current transfer ratio(IC / IF) is the ratio of the detector collector current to the LED input current. 5. Pulse test: pulse width = 300 s, duty cycle 2.0% . 6. IF adjusted to IC = 2.0 mA and IC = 0.7 mA rms. 7. The frequency at which IC is 3 dB down from the 1 kHz value. Isolation Characteristics Symbol Characteristic Test Conditions VISO Input-Output Isolation Voltage t = 1 Minute CISO Isolation Capacitance RISO Isolation Resistance (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 Min. Typ. 4170 VI-O = 0 V, f = 1 MHz VI-O = 500 VDC, TA = 25C Unit VACRMS 0.2 1011 Max. pF www.fairchildsemi.com 5 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Electrical Characteristics (Continued) 1.6 1.7 1.4 1.6 1.2 NORMALIZED CTR VF - FORWARD VOLTAGE (V) 1.8 1.5 1.4 TA = -55C 1.3 TA = 25C 1.2 VCE = 5.0 V TA = 25C Normalized to IF = 10 mA 1.0 0.8 0.6 0.4 TA = 100C 1.1 0.2 1.0 0.0 1 10 0 100 2 4 6 IF - LED FORWARD CURRENT (mA) 10 12 14 16 18 20 Figure 4. Normalized CTR vs. Forward Current Figure 3. LED Forward Voltage vs. Forward Current 1.4 NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 1.0 1.2 IF = 5 mA NORMALIZED CTR 8 IF - FORWARD CURRENT (mA) 1.0 IF = 10 mA 0.8 IF = 20 mA 0.6 Normalized to IF = 10 mA TA = 25C 0.4 0.9 IF = 20 mA 0.8 IF = 10 mA 0.7 IF = 5 mA 0.6 0.5 0.4 0.3 0.2 VCE= 5.0 V 0.1 0.0 0.2 -60 -40 -20 0 20 40 60 80 100 10 100 TA - AMBIENT TEMPERATURE (C) Figure 5. Normalized CTR vs. Ambient Temperature Figure 6. CTR vs. RBE (Unsaturated) 100 1.0 0.9 VCE= 0.3 V VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 1000 RBE- BASE RESISTANCE (k) 0.8 IF = 20 mA 0.7 0.6 IF = 10 mA 0.5 0.4 0.3 IF = 5 mA 0.2 TA = 25C 10 1 IF = 2.5 mA 0.1 IF = 20 mA 0.01 IF = 5 mA 0.1 0.001 0.01 0.0 10 100 1000 RBE- BASE RESISTANCE (k ) 0.1 1 10 IC - COLLECTOR CURRENT (mA) Figure 7. CTR vs. RBE (Saturated) (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 IF = 10 mA Figure 8. Collector-Emitter Saturation Voltage vs. Collector Current www.fairchildsemi.com 6 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Typical Performance Curves 1000 5.0 NORMALIZED ton - (ton(RBE) / ton(open)) IF = 10 mA VCC = 10 V TA = 25C SWITCHING SPEED (s) 100 Toff 10 Tf Ton 1 Tr 0.1 0.1 4.5 VCC = 10 V IC = 2 mA RL = 100 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 1 10 100 10 100 R-LOAD RESISTOR (k) Figure 9. Switching Speed vs. Load Resistor 10000 100000 Figure 10. Normalized ton vs. RBE ICEO - COLLECTOR -EMITTER DARK CURRENT (nA) 1.4 1.3 NORMALIZED toff - (toff(RBE) / toff(open)) 1000 RBE- BASE RESISTANCE (k) 1.2 1.1 1.0 0.9 0.8 0.7 0.6 VCC = 10 V IC = 2 mA RL = 100 0.5 0.4 0.3 0.2 10000 VCE = 10 V TA = 25C 1000 100 10 1 0.1 0.01 0.001 0.1 10 100 1000 10000 0 100000 20 RBE- BASE RESISTANCE (k) 40 60 80 100 TA - AMBIENT TEMPERATURE (C) Figure 11. Normalized toff vs. RBE Figure 12. Dark Current vs. Ambient Temperature Switching Time Test Circuit and Waveform VCC = 10 V INPUT PULSE IC IF INPUT RL 10% OUTPUT OUTPUT PULSE 90% RBE tr ton tf toff Adjust IF to produce IC = 2 mA Figure 13. Switching Time Test Circuit and Waveform (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 7 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Typical Performance Curves (Continued) 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Reflow Profile 300 260C 280 260 > 245C = 42 s 240 220 200 180 C Time above 183C = 90 s 160 140 120 1.822C/s Ramp-up rate 100 80 60 40 33 s 20 0 0 60 120 180 270 360 Time (s) Figure 14. Reflow Profile (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 8 Part Number Package Packing Method 4N29M DIP 6-Pin Tube (50 Units) 4N29SM SMT 6-Pin (Lead Bend) Tube (50 Units) 4N29SR2M SMT 6-Pin (Lead Bend) Tape and Reel (1000 Units) 4N29VM DIP 6-Pin, DIN EN/IEC60747-5-5 Option Tube (50 Units) 4N29SVM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tube (50 Units) 4N29SR2VM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tape and Reel (1000 Units) 4N29TVM DIP 6-Pin, 0.4" Lead Spacing, DIN EN/IEC60747-5-5 Option Tube (50 Units) Note: 8. The product orderable part number system listed in this table also applies to the 4N30M, 4N32M, 4N33M, H11B1M, and TIL113M devices. Marking Information 1 V 3 4N29 2 X YY Q 6 5 4 Figure 15. Top Mark Table 1. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 One-Digit Year Code, e.g., "4" 5 Digit Work Week, Ranging from "01" to "53" 6 Assembly Package Code (c)2007 Fairchild Semiconductor Corporation 4NXXM, H11B1M, TIL113M Rev. 1.0.4 www.fairchildsemi.com 9 4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M -- 6-Pin DIP General Purpose Photodarlington Optocoupler Ordering Information TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower AttitudeEngineTM Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) Power Supply WebDesigner PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM (R) * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application - including life critical medical equipment - where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer's use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild's product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild's Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I77 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: 4N33M 4N33SM 4N33VM 4N33TVM 4N33SR2M