RNF-100 Microtubing Flexible Polyolefin, Heat - Shrinkable Tubing This specification covers the requirements for one type of single wall, electrical insulating, extruded tubing whose diameter will reduce to a predetermined size upon application of heat in excess of 121 C (250 F). The tubing is fabricated from flexible polyolefin crosslinked by irradiation. It shall be homogenous and essentially free from flaws, defects, pinholes, seams, cracks or inclusions. Table 1: Dimensions (inches) As Supplied Expanded I.D. Minimum (D) .022 .032 .032 Size No. 300 No. 301 No. 302 Recovered Recovered I.D. Recovered Wall Maximum (d) Thickness (W) .013 .010 .002 .016 .015 max .016 .009 .002 Specification Control Drawing Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA RNF-100 Microtubing Flexible Polyolefin, Heat - Shrinkable Tubing Title: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application Cage Code: Scale: Size: 06090 None A Document No : RNF-100 Microtubing Rev. Date: Rev.: Sheet: 30-Oct-96 C 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.