1
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Introduction
MIL-PRF-39012 QPL connectors all have gold-plated, captivated contacts.
Specifications for body plating vary with series:
BNC, N, and TNC QPL connectors have silver-plated brass bodies.
SMA QPL connectors have stainless steel bodies, with passivated finish,
except SMA connector bodies or ferrules to be soldered to semi-rigid cable
jacket, which are gold plated.
SMC QPL connectors have gold- or silver-plated bodies.
M39012 QPL cable connectors are divided into categories which define
their cable attachment types, and are assigned cable groups defined by
the governing agency (DSCC). See following page for M39012 cable
groups, and definitions of categories.
The latest revisions to MIL-PRF-39012, along with individual slash sheets,
may be obtained from the DSCC website at http://www.dscc.dla.mil.
Contents—Listed by Type
BNC Straight Cable Plugs (M39012/16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BNC Right Angle Cable Plugs (M39012/20) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BNC Straight Cable Jacks (M39012/17). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
BNC Panel Cable Jacks (M39012/18). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
BNC Bulkhead Cable Jacks (M39012/19) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BNC Bulkhead Jack Receptacles (M39012/21) . . . . . . . . . . . . . . . . . . . . . . . . . 6
BNC Panel Jack Receptacles (M39012/22). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BNC Right Angle Bulkhead Jack Receptacles (M39012/23) . . . . . . . . . . . . . . . 6
BNC Hermetic Seal Bulkhead Jack Receptacles (M39012/24) . . . . . . . . . . . . . . 6
BNC Dust Caps (M39012/25). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
N Straight Cable Plugs (M39012/01). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
N Right Angle Cable Plugs (M39012/05) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
N Straight and Panel Cable Jacks (M39012/02) . . . . . . . . . . . . . . . . . . . . . . . . 8
N Bulkhead Cable Jacks (M39012/03). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
N Bulkhead and Panel Receptacles (M39012/04) . . . . . . . . . . . . . . . . . . . . . . . 9
SMA Straight Cable Plugs for Flexible Cable (M39012/55). . . . . . . . . . . . . . . 10
SMA Right Angle Cable Plugs for Flexible Cable (M39012/56) . . . . . . . . . . . 11
SMA Straight Cable Plugs for Semi-Rigid Cable (M39012/79) . . . . . . . . . . . . 12
SMA Right Angle Cable Plugs for Semi-Rigid Cable (M39012/80) . . . . . . . . . 12
SMA Straight Cable Jacks for Flexible Cable (M39012/57) . . . . . . . . . . . . . . . 13
SMA Straight Cable Jacks for Semi-Rigid Cable (M39012/81) . . . . . . . . . . . . 13
SMA Panel Cable Jacks for Flexible Cable (M39012/58) . . . . . . . . . . . . . . . . . 14
SMA Panel Cable Jacks for Semi-Rigid Cable (M39012/82) . . . . . . . . . . . . . . 14
SMA Bulkhead Cable Jacks for Flexible Cable (M39012/59). . . . . . . . . . . . . . 15
SMA Bulkhead Cable Jacks for Semi-Rigid Cable (M39012/83) . . . . . . . . . . . 15
SMA Panel Jack Receptacles (M39012/60) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SMA Bulkhead Jack Receptacles (M39012/61) . . . . . . . . . . . . . . . . . . . . . . . . 16
SMA Hermetic Seal Bulkhead Jack Receptacles (M39012/62). . . . . . . . . . . . . 16
SMC Straight Cable Plugs (M39012/73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SMC Right Angle Cable Plugs (M39012/75) . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SMC Bulkhead Jack Receptacles (M39012/77) . . . . . . . . . . . . . . . . . . . . . . . . 17
TNC Straight Cable Plugs (M39012/26). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TNC Right Angle Cable Plugs (M39012/30) . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TNC Straight Cable Jacks (M39012/27) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TNC Bulkhead Cable Jacks (M39012/28). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
TNC Panel Cable Jacks (M39012/29) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TNC Panel Jack Receptacles (M39012/31). . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TNC Bulkhead Jack Receptacles (M39012/32). . . . . . . . . . . . . . . . . . . . . . . . . 21
TNC Dust Caps (M39012/25) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Contents—Listed by M39012 Part Number
M39012/01 . . . . . . . . . . . . . . . . . . 7
M39012/02 . . . . . . . . . . . . . . . . . . 8
M39012/03 . . . . . . . . . . . . . . . . . . 9
M39012/04 . . . . . . . . . . . . . . . . . . 9
M39012/05 . . . . . . . . . . . . . . . . . . 7
M39012/16 . . . . . . . . . . . . . . . . . . 3
M39012/17 . . . . . . . . . . . . . . . . . . 4
M39012/18 . . . . . . . . . . . . . . . . . . 4
M39012/19 . . . . . . . . . . . . . . . . . . 5
M39012/20 . . . . . . . . . . . . . . . . . . 3
M39012/21 . . . . . . . . . . . . . . . . . . 6
M39012/22 . . . . . . . . . . . . . . . . . . 6
M39012/23 . . . . . . . . . . . . . . . . . . 6
M39012/24 . . . . . . . . . . . . . . . . . . 6
M39012/25-0006,7,8,15,16 . . . . . 5
M39012/25-0020,21 . . . . . . . . . . 19
M39012/26 . . . . . . . . . . . . . . . . . 18
M39012/27 . . . . . . . . . . . . . . . . . 19
M39012/28 . . . . . . . . . . . . . . . . . 20
M39012/29 . . . . . . . . . . . . . . . . . 21
M39012/30 . . . . . . . . . . . . . . . . . 18
M39012/31 . . . . . . . . . . . . . . . . . 21
M39012/32 . . . . . . . . . . . . . . . . . 21
M39012/55 . . . . . . . . . . . . . . . . . 10
M39012/56 . . . . . . . . . . . . . . . . . 11
M39012/57 . . . . . . . . . . . . . . . . . 13
M39012/58 . . . . . . . . . . . . . . . . . 14
M39012/59 . . . . . . . . . . . . . . . . . 15
M39012/60 . . . . . . . . . . . . . . . . . 16
M39012/61 . . . . . . . . . . . . . . . . . 16
M39012/62 . . . . . . . . . . . . . . . . . 16
M39012/73 . . . . . . . . . . . . . . . . . 17
M39012/75 . . . . . . . . . . . . . . . . . 17
M39012/77 . . . . . . . . . . . . . . . . . 17
M39012/79 . . . . . . . . . . . . . . . . . 12
M39012/80 . . . . . . . . . . . . . . . . . 12
M39012/81 . . . . . . . . . . . . . . . . . 13
M39012/82 . . . . . . . . . . . . . . . . . 14
M39012/83 . . . . . . . . . . . . . . . . . 15
Automatic
Connector
MIL-PRF-39012 QPL
MIL-PRF-39012 QPL
© 2004 Automatic Connector. All rights reserved.
MIL-PRF-39012 Cable Groups
MIL-PRF-39012 Cable Groups—Flexible Cables
Cable Category
M17/ A B, C, D
2-RG6 VIII VIII
6-RG11 XXc
28-RG058 VI VIa
29-RG59 VII VIIa
30-RG062 VII VIIa
54-RG122 IV IV
60-RG142 VI VIb
62-RG144 XXc
65-RG165 XXa
72-RG211 XIII —
73-RG212 VIII VIII
74-RG213 XXa
74-RG215 XI —
75-RG214 XXb
77-RG216 XXd
77-RG218 XIV —
78-RG217 XII XII
84-RG223 VI VIb
86-00001 XXb
90-RG71 VII VIIb
92-RG115 IX —
93-RG178 II
94-RG179 II IIb
95-RG180 VV
Cable Category
M17/ A B, C, D
97-RG210 VII VIIa
110-RG302 VII VIIa
111-RG303 VI VIa
112-RG304 VIII VIII
119-RG174 II IIa
127-RG393 XXb
128-RG400 VI VIb
133-RG316 II IIa
152-00001 III III
155-00001 VI VIa
157-00001 IV IV
158-00001 VI VIb
159-00001 XXa
161-00001 XIII —
162-00001 VIII VIII
163-00001 XXa
164-00001 XXb
165-00001 XII XII
166-00001 XIV —
167-00001 VI VIb
168-00001 IX —
169-00001 II
170-00001 VI VIa
171-00001 VIII VIII
Cable Category
M17/ A B, C, D
172-00001 II IIa
173-00001 II IIa
174-00001 XXb
175-00001 VI VIb
180-00001 VIII VIII
181-00001 XXc
183-00001 VI VIa
184-00001 VII VIIa
185-00001 VII VIIa
187-00001 IV IV
188-00001 VIII VIII
189-00001 XXa
189-00002 XI —
190-00001 XXb
191-00001 XXd
192-00001 XII XII
194-00001 VI VIb
195-00001 XIV —
196-00001 II IIa
197-00001 VI VIa
198-00001 IV IV
199-00001 VIII VIII
200-00001 VI VIb
MIL-PRF-39012 Cable Groups—Semi-Rigid Cables
Cable M17/ Group
129-RG401, 129-00001 XV
130- RG402, 130-00001 through -00007 XVI
133- RG405, 133-00001 through -00011 XVII
Cable M17/ Group
151-00001, 151-00002 XVIII
154-00001, 154-00002 XIX
M39012 QPL cable connectors are divided into
categories which define their cable attachment
methods:
Category A (flexible and semi-rigid cables):
Field replaceable, no special tools required for
assembly.
Many of our Category A QPL connectors in BNC,
N, and TNC series are available with your choice
of Improved Wedge-Lock or V-Groove cable
attachment.
Category A connectors for flexible cable in SMA
series are available with your choice of solder or
Wedge-Lock cable attachment.
Category B (flexible and semi-rigid cables):
Special tools may be required for assembly.
(Most category B connectors use readily-available
commercial tooling.)
Category C (flexible cables): Crimp connectors
which can be assembled with specified tooling
and die sizes.
Category D (flexible cables): Crimp connectors
which can be assembled with specified tooling
and die sizes, and also have defined sizes for
crimp sleeves, contacts, and other parts. Category D
connectors have crimpable center contacts.
Category E (semi-rigid cables): connectors with
solder attachment, using specified cable stripping
dimensions and standard tool kit.
Category F (semi-rigid cables): connectors with
crimp attachment, using specified cable stripping
dimensions and standard tool kit.
Refer to the tables at right to find cable groups
for MIL-C-17 cables.
2
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
3
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
BNC Cable Plugs
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
(1) Supersedes M39012/16-0020. (2) Supersedes M39012/16-0111. (3) Supersedes M39012/16-0118.
(4) Supersedes M39012/20-0108.
1.1 (27.9)
ø.50 (12.7)
ø.56
(14.2)
Figure 2
Figure 1
1.1 (27.9)
.50
(12.7)
ø.56
(14.2)
1.3
(33.1)
.84 (21.3)
ø.56 (14.2)
ø.50 (12.7)
Figure 4
1.4
(35.6)
.84 (21.3)
.50
(12.7)
ø.56 (14.2)
Right Angle Cable Plugs (M39012/20)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/20-0006 C VIa Econo-Crimp 10-10005-000 3
M39012/20-0007 C VIb Econo-Crimp 10-10005-001 3
M39012/20-0010 C VIIb Econo-Crimp 10-10005-002 3
M39012/20-0101 AVI V-Groove 10-10004-001 4
Wedge-Lock 10-10001-000
M39012/20-0102(4) A VII V-Groove 10-10004-000 4
Wedge-Lock 10-10001-001
M39012/20-0501 D IV Econo-Crimp 10-10005-003 3
M39012/20-0502 D V Econo-Crimp 10-10005-004 3
M39012/20-0503 D VIb Econo-Crimp 10-10005-005 3
M39012/20-0504 D VIa Econo-Crimp 10-10005-006 3
Straight Cable Plugs (M39012/16)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/16-0013 C VIa Econo-Crimp 10-01009-001 1
M39012/16-0014 C VIb Econo-Crimp 10-01009-002 1
M39012/16-0015(1) C VIIa Econo-Crimp 10-01009-003 1
M39012/16-0016 C IV Econo-Crimp 10-01009-004 1
M39012/16-0017 C VIIb Econo-Crimp 10-01009-005 1
M39012/16-0101(2) AVI V-Groove 10-01014-000 2
Wedge-Lock 10-01001-000
M39012/16-0102(3) A VII V-Groove 10-01014-001 2
Wedge-Lock 10-01001-001
M39012/16-0103 AIV V-Groove 10-01014-002 2
Wedge-Lock 10-01001-004
M39012/16-0220 A II Wedge-Lock 10-01001-018 2
M39012/16-0501 D IV Econo-Crimp 10-01009-007 1
M39012/16-0502 D V Econo-Crimp 10-01009-008 1
M39012/16-0503 D VIb Econo-Crimp 10-01009-009 1
M39012/16-0504 D VIa Econo-Crimp 10-01009-010 1
Figure 3
BNC Cable Jacks
• See page 2 for cable groups and category
definitions.
1.1 (27.9)
ø.50 (12.7) ø.56 (14.2)
Figure 2
Figure 1
1.2 (30.5)
.50
(12.7)
1.1 (27.9)
ø.50 (12.7)
.55
(14.0)
.69
(17.5)
.50
(12.7)
3–56 tap 4 places
.125 (3.2) max. panel
Figure 4
1.1 (27.9)
.55
(14.0)
.50
(12.7)
.69
(17.5)
.50
(12.7)
3–56 tap 4 places
.125 (3.2) max. panel
Figure 3
(1) Supersedes M39012/17-0020. (2) Supersedes M39012/17-0111. (3) Supersedes M39012/17-0118.
Straight Cable Jacks (M39012/17)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/17-0013 C VIa Econo-Crimp 10-16005-000 1
M39012/17-0014 C VIb Econo-Crimp 10-16005-001 1
M39012/17-0015(1) C VIIa Econo-Crimp 10-16005-002 1
M39012/17-0016 C IV Econo-Crimp 10-16005-003 1
M39012/17-0017 C VIIb Econo-Crimp 10-16005-004 1
M39012/17-0101(2) AVI V-Groove 10-16003-001 2
Wedge-Lock 10-16001-000
M39012/17-0102(3) A VII V-Groove 10-16003-002 2
Wedge-Lock 10-16001-001
M39012/17-0103 AIV V-Groove 10-16003-003 2
Wedge-Lock 10-16001-002
M39012/17-0501 D IV Econo-Crimp 10-16005-006 1
M39012/17-0502 D V Econo-Crimp 10-16005-007 1
M39012/17-0503 D VIb Econo-Crimp 10-16005-008 1
M39012/17-0504 D VIa Econo-Crimp 10-16005-009 1
(1) Supersedes M39012/18-0020. (2) Supersedes M39012/18-0111. (3) Supersedes M39012/18-0118.
Panel Cable Jacks (M39012/18)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/18-0013 C VIa Econo-Crimp 10-19004-000 3
M39012/18-0014 C VIb Econo-Crimp 10-19004-001 3
M39012/18-0015(1) C VIIa Econo-Crimp 10-19004-002 3
M39012/18-0016 C IV Econo-Crimp 10-19004-003 3
M39012/18-0017 C VIIb Econo-Crimp 10-19004-004 3
M39012/18-0101(2) AVI V-Groove 10-19002-000 4
Wedge-Lock 10-19001-000
M39012/18-0102(3) A VII V-Groove 10-19002-001 4
Wedge-Lock 10-19001-001
M39012/18-0103 AIV V-Groove 10-19002-002 4
Wedge-Lock 10-19001-002
M39012/18-0501 D IV Econo-Crimp 10-19004-006 3
M39012/18-0502 D V Econo-Crimp 10-19004-007 3
M39012/18-0503 D VIb Econo-Crimp 10-19004-008 3
M39012/18-0504 D VIa Econo-Crimp 10-19004-009 3
4
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
BNC Cable Jacks
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
1.1 (27.9)
.81 (20.6)
ø.50 (12.7)
.688
(17.4) hex
.218*
(5.5)
ø.50*
(12.7)
*Mounting hole
dimensions
.24 (6.1)
max. panel
Figure 2
Figure 1
ø.14 (3.6)
A
ø.56
(14.2)
.72
(18.3)
A
ø.52 (13.2)
ø.56
(14.2)
.72
(18.3)
ø.50 (12.7)
A
ø.28 (7.1) .72
(18.3)
Figure 3
(1) Supersedes M39012/19-0020. (2) Supersedes M39012/19-0111. (3) Supersedes M39012/19-0118.
Bulkhead Cable Jacks (M39012/19)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/19-0013 C VIa Econo-Crimp 10-18007-000 1
M39012/19-0014 C VIb Econo-Crimp 10-18007-001 1
M39012/19-0015(1) C VIIa Econo-Crimp 10-18007-002 1
M39012/19-0016 C IV Econo-Crimp 10-18007-003 1
M39012/19-0017 C VIIb Econo-Crimp 10-18007-004 1
M39012/19-0101(2) AVI V-Groove 10-18004-000 2
Wedge-Lock 10-08001-000
M39012/19-0102(3) A VII V-Groove 10-18004-004 2
Wedge-Lock 10-18001-001
M39012/19-0110 AIV V-Groove 10-18004-001 2
Wedge-Lock 10-18001-007
M39012/19-0220 A II Wedge-Lock 10-18001-018 2
M39012/19-0501 D IV Econo-Crimp 10-18007-006 1
M39012/19-0502 D V Econo-Crimp 10-18007-007 1
M39012/19-0503 D VIb Econo-Crimp 10-18007-008 1
M39012/19-0504 D VIa Econo-Crimp 10-18007-009 1
Figure 4 Figure 5
Dust Caps (M39012/25)
M39012 P/N Mating Dim. A Chain Automatic P/N Figure
M39012/25-0006 Plug 2.25 (57.2) Bead 10-92001-000 3
M39012/25-0007 Plug 2.70 (68.6) Safety 10-92001-001 4
M39012/25-0008 Jack 3.25 (82.6) Bead 10-93000-000 5
M39012/25-0015 Plug — None 10-92002-000 6
M39012/25-0016 Plug*2.50 (63.5) Bead 10-94000-000 3
*Shorting type.
ø.56
(14.2)
.59
(15.0)
Figure 6
5
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
BNC Receptacles (M39012/21 through /24)
Figure 1
.47
(11.9)
A
ø.062 (1.6)
max wire
ø.50
(12.7)
B max. panel
D*
øC*
*Mounting hole dimensions
1.1 (27.9)
ø.31 (7.9)
.63
(16.0)
.20 (5.1) max panel
ø.062 (1.6)
max wire .69
(17.5)
.50
(12.7)
3–56 tap 4 places
.62
(15.7)
AB
ø.062 (1.6)
max. wire
ø.59
(15.0)
C max. panel
E*
øD*
*Mounting hole dimensions
.85 (21.6)
.19 (4.8) max. panel
1.2 (31)
ø.69
(17.5)
ø.062 (1.6)
max wire
.22 (5.6)*
ø.51*
(13.6)
*Mounting hole dimensions
ø.69
(17.5)
.52
(13.2)
1.08 (27.0)
ø.062 (1.6)
max wire
.15 (3.8)*
ø.41* (10.4)
*Mounting hole dimensions .19 (4.8) max panel
Bulkhead and Panel Receptacles
M39012 P/N Description A B C D E Automatic P/N Figure
M39012/21-0001 Bulkhead jack, front mount, thin panel 1.1 (27.9) .13 (3.3) .44 (11.2) .19 (4.8) — 10-46003-001 1
M39012/21-0002 Bulkhead jack, front mount, thick panel 1.2 (30.5) .26 (6.6) .39 (9.9) .16 (4.1) — 10-46007-000 1
M39012/21-0003 Bulkhead jack, front mount, thick panel 1.2 (30.5) .26 (6.6) .39 (9.9) .16 (4.1) — 10-46003-000 1
M39012/22-0001 Panel jack, four-hole flange — — — — — 10-48000-002 2
M39012/23-0001 Right angle bulkhead jack, thick panel 1.2 (30.4) .41(10.4) .26 (6.6) .41(10.4) .15 (3.8) 10-54001-001 3
M39012/23-0002 Right angle bulkhead jack, thin panel 1.03(26.2) .40(10.2) .13 (3.3) .44(11.2) .19 (4.8) 10-54002-000 3
M39012/24-0001 Bulkhead jack, hermetic seal, rear mount — — — — — 10-50000-001 4
M39012/24-0002 Bulkhead jack, hermetic seal, front mount — — — — — 10-49001-001 5
Figure 2
Figure 3
Figure 4
Figure 5
6
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
N Cable Plugs
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and
illustrations of cable attachment types.
(1) Supersedes M39012/01-0027. (2) Supersedes M39012/01-0021. (3) Supersedes M39012/01-0022.
1.8 (45.7)
ø.875 (22.2) ø.78 (19.8)
Note 1
Figure 2
Figure 1
1.6 (40.8)
ø.75 (19.1) ø.78 (19.8)
Note 1
2.3 (58.4)
ø.78 (19.8)
ø1.32 (33.5)
Note 1
Figure 4
1.6 (40.6)
.75
(19.1)
ø.78 (19.8)
Note 1
Straight Cable Plugs (M39012/01)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/01-0005 AX V-Groove 20-01004-006 1
Wedge-Lock 20-01001-000
M39012/01-0015 A XII Wedge-Lock 20-01001-004 2
M39012/01-0016(1) C VIII Econo-Crimp 20-01006-002 3
M39012/01-0017(2) C Xa Econo-Crimp 20-01006-003 3
M39012/01-0018(3) C Xb Econo-Crimp 20-01006-004 3
M39012/01-0023 C Xc Econo-Crimp 20-01006-006 3
M39012/01-0024 C Xd Econo-Crimp 20-01006-007 3
M39012/01-0101 A VIII Wedge-Lock 20-01001-006 1
M39012/01-0104 A XIV Wedge-Lock 20-01001-009 4
M39012/01-0125 C XI Wedge-Lock 20-01001-005 1
M39012/01-0501 D Xb Econo-Crimp 20-01006-009 3
M39012/01-0502 D Xa Econo-Crimp 20-01006-010 3
M39012/01-0503 D VIb Econo-Crimp 20-01012-000 3
M39012/01-0504 D VIa Econo-Crimp 20-01012-001 3
Figure 3
Note 1: 3 lockwire holes, .027 (.69) minimum
diameter, equally spaced.
1.1 (28.0)
1.3
(33.0)
ø.75 (19.1)
ø.78 (19.8)
Note 1
Right Angle Cable Plugs (M39012/05)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/05-0006 A VIII Wedge-Lock 20-10001-001 5
M39012/05-0101 A X Wedge-Lock 20-10001-000 5
Figure 5
7
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
1.6 (40.6)
.218 (5.5) max. panel
.72
(18.3)
1.0
(25.4)
ø.125 (3.2) 4 places
.75
(19.1)
.65
(16.5)
1.6 (40.6)
ø.63 (16.0)
.75
(19.1)
1.6 (40.6)
.218 (5.5) max. panel
.72
(18.3)
1.0
(25.4)
ø.125 (3.2) 4 places
ø.75 (19.1)*
.65
(16.5)
*.875 (22.2) for M39012/02-0133
1.6 (40.8)
ø.75 (19.1) ø.63 (16.0)
N Cable Jacks
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
Figure 2
Figure 1
Figure 4
(1)
Supersedes M39012/02-0040.
(2)
Supersedes M39012/02-0024.
(3)
Supersedes M39012/01-0025.
Straight Cable Jacks (M39012/02)
Cable Cable
M39012 P/N Category Group Attachment Automatic P/N Figure
M39012/02-0003 A X Wedge-Lock 20-16001-000 1
M39012/02-0019(1) C VIII Econo-Crimp 20-16000-001 2
M39012/02-0020(2) C Xa Econo-Crimp 20-16000-002 2
M39012/02-0021(3) C Xb Econo-Crimp 20-16000-003 2
M39012/02-0026 C Xc Econo-Crimp 20-16000-006 2
M39012/02-0039 C Xd Econo-Crimp 20-16000-007 2
M39012/02-0101 A VIII Wedge-Lock 20-16001-002 1
M39012/02-0131 A XI Wedge-Lock 20-16001-003 1
M39012/02-0501 D Xb Econo-Crimp 20-16000-009 2
M39012/02-0502 D Xa Econo-Crimp 20-16000-010 2
M39012/02-0503 D VIb Econo-Crimp 20-16007-000 2
M39012/02-0504 D VIa Econo-Crimp 20-16007-001 2
(1)
Supersedes M39012/02-0043.
(2)
Supersedes M39012/02-0041.
(3)
Supersedes M39012/01-0034.
Panel Cable Jacks (M39012/02)
Cable Cable
M39012 P/N Category Group Attachment Automatic P/N Figure
M39012/02-0006 A X Wedge-Lock 20-19001-000 3
M39012/02-0027(1) C VIII Econo-Crimp 20-19004-004 4
M39012/02-0028(2) C Xa Econo-Crimp 20-90004-001 4
M39012/02-0029(3) C Xb Econo-Crimp 20-19004-000 4
M39012/02-0030 C Xd Econo-Crimp 20-19004-005 4
M39012/02-0042 C Xc Econo-Crimp 20-19004-002 4
M39012/02-0104 A VIII Wedge-Lock 20-19001-001 3
M39012/02-0132 A XI Wedge-Lock 20-19001-002 3
M39012/02-0133 A XII Wedge-Lock 20-19001-003 3
M39012/02-0511 D Xb Econo-Crimp 20-19004-009 4
M39012/02-0512 D Xa Econo-Crimp 20-19004-010 4
M39012/02-0513 D VIb Econo-Crimp 20-19007-000 4
M39012/02-0514 D VIa Econo-Crimp 20-19007-001 4
Figure 3
8
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
1.1 (27.9)
.65
(16.5)
.110 (2.8)
max. panel
.72
(18.3)
1.0
(25.4)
ø.125 (3.2) 4 places
.75
(19.1)
1.8 (45.7)
.91 (23.1)ø.88 (22.4)
.25 (6.4) max. panel
.72*
(18.3)
ø.64*
(16.4)
*Mounting hole dimensions
ø.88 (22.4)
.25 (6.4)
max. panel
.72*
(18.3)
ø.64*
(16.4)
*Mounting hole dimensions
1.6 (40.6)
.72
(18.3)
ø.75 (19.1)*
*.875 for M39012/03-0102
1.8 (45.7)
.91 (23.1)ø.88 (22.4)
.25 (6.4) max. panel
.72*
(18.3)
ø.64*
(16.4)
*Mounting hole dimensions
N Cable Jacks and Receptacles
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and
illustrations of cable attachment types.
Figure 2
Figure 1
Figure 4Figure 3
1.3 (33.0)
.92 (23.4)
ø.88
(22.4)
.25 (6.4)
max. panel
.72*
(18.3)
ø.64*
(16.4)
*Mounting hole dimensions
Figure 5
(1)
Supersedes M39012/03-0023.
(2)
Supersedes M39012/03-0018.
(3)
Supersedes M39012/03-0019.
Bulkhead Cable Jacks (M39012/03)
Cable Cable
M39012 P/N Category Group Attachment Automatic P/N Figure
M39012/03-0012 A X Wedge-Lock 20-18001-000 1
M39012/03-0013(1) C VIII Econo-Crimp 20-18005-006 2
M39012/03-0014(2) C Xa Econo-Crimp 20-18005-003 2
M39012/03-0015(3) C Xb Econo-Crimp 20-18005-001 2
M39012/03-0020 C Xc Econo-Crimp 20-18005-005 2
M39012/03-0021 C Xd Econo-Crimp 20-18005-007 2
M39012/03-0101 A VIII Wedge-Lock 20-18001-003 1
M39012/03-0102 A XII Wedge-Lock 20-18001-011 1
M39012/03-0501 D Xb Econo-Crimp 20-18005-004 2
M39012/03-0502 D Xa Econo-Crimp 20-18005-009 2
M39012/03-0503 D VIb Econo-Crimp 20-18010-000 2
M39012/03-0504 D VIa Econo-Crimp 20-18010-001 2
Jack Receptacles (M39012/04)
M39012 P/N Type Automatic P/N Figure
M39012/04-0001 Bulkhead (front mount), hermetic 20-49001-000 3
M39012/04-0002 Panel mount 20-48001-003 4
M39012/04-0003 Bulkhead (rear mount) 20-47001-000 5
9
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Cable Plugs for Flexible Cable
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
.81 (20.6) max.
ø.344
(8.7) max..312 hex
Note 1
Figure 2
Figure 1
.90 (22.9) max.
.312 hex Note 1
1.08 (27.4) max.
.312 hex Note 1
Figure 4
1.25 (31.8) max.
.312 hex Note 1
Figure 3
Note 1: 3 lockwire holes,
.016 (.41) minimum
diameter, equally
spaced.
Straight Plugs (M39012/55)—With Lockwire Holes
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/55-3006 AI Solder 33-10009-008 1
Wedge-Lock 33-01001-004 2
M39012/55-3007 AIISolder 33-10009-009 1
Wedge-Lock 33-01001-000 2
M39012/55-3008 AIV
Solder 33-01010-020 1
Wedge-Lock 33-01001-003 2
M39012/55-3009 AVI
Solder 33-01010-021 1
Wedge-Lock 33-01001-021 2
M39012/55-3010 A VIa Solder 33-01010-022 1
Wedge-Lock 33-01001-002 2
M39012/55B3011 B I X-Crimp 33-01009-000 3
M39012/55B3012 B IIa X-Crimp 33-01009-001 3
M39012/55B3013 B IV X-Crimp 33-01010-000 3
M39012/55B3014 B VIa X-Crimp 33-01010-001 3
M39012/55B3015 B VIb X-Crimp 33-01010-002 3
M39012/55B3016 B VIb X-Crimp 33-01010-003 3
M39012/55B3017 B VIa X-Crimp 33-01010-004 3
M39012/55B3018 B I X-Crimp 33-01009-002 3
M39012/55B3019 B IIa X-Crimp 33-01009-003 3
M39012/55B3020 B IV X-Crimp 33-01010-005 3
M39012/55B3021 B VIa X-Crimp 33-01010-006 3
M39012/55B3022 B VIb X-Crimp 33-01010-007 3
M39012/55B3023 B VIb X-Crimp 33-01010-008 3
M39012/55B3024 B VIa X-Crimp 33-01010-009 3
M39012/55-3025 C I X-Crimp 33-01011-000 3
M39012/55-3026 C IIa
Econo-Crimp
33-01012-000 4
M39012/55-3027 CIV
Econo-Crimp
33-01077-003 4
M39012/55-3028 C VIb
Econo-Crimp
33-01077-001 4
M39012/55-3029 C VIa
Econo-Crimp
33-01077-002 4
M39012/55-3030 A III Wedge-Lock 33-01001-025 2
M39012/55-3502 D VIb
Econo-Crimp
33-01077-007 4
Straight Plugs (M39012/55)—Without Lockwire Holes
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/55-3106 A I Wedge-Lock 33-01001-009 2
M39012/55-3107 A II Wedge-Lock 33-01001-010 2
M39012/55-3108 A IV Wedge-Lock 33-01001-011 2
M39012/55-3109 A VI Wedge-Lock 33-01001-022 2
M39012/55-3110 A VIa Wedge-Lock 33-01001-013 2
M39012/55B3111 B I X-Crimp 33-01009-004 3
M39012/55B3112 B IIa X-Crimp 33-01009-005 3
M39012/55B3113 B IV X-Crimp 33-01010-010 3
M39012/55B3114 B VIa X-Crimp 33-01010-011 3
M39012/55B3115 B VIb X-Crimp 33-01010-012 3
M39012/55B3116 B VIb X-Crimp 33-01010-013 3
M39012/55B3117 B VIa X-Crimp 33-01010-014 3
M39012/55B3118 B I X-Crimp 33-01009-006 3
M39012/55B3119 B IIa X-Crimp 33-01009-007 3
M39012/55B3120 B IV X-Crimp 33-01010-015 3
M39012/55B3121 B VIa X-Crimp 33-01010-016 3
M39012/55B3122 B VIb X-Crimp 33-01010-017 3
M39012/55B3123 B VIb X-Crimp 33-01010-018 3
M39012/55B3124 B VIa X-Crimp 33-01010-019 3
M39012/55-3125 C I X-Crimp 33-01011-001 3
M39012/55-3126 C IIa
Econo-Crimp
33-01012-002 4
M39012/55-3127 CIV
Econo-Crimp
33-01077-004 4
M39012/55-3128 C VIb
Econo-Crimp
33-01077-005 4
M39012/55-3129 C VIa
Econo-Crimp
33-01077-006 4
M39012/55-3130 A III Wedge-Lock 33-01001-026 2
M39012/55-3602 D VIb
Econo-Crimp
33-01077-008 4
10
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Cable Plugs for Flexible Cable
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
Note 1: 3 lockwire holes, .016 (.41) minimum diameter, equally spaced.
.75 (19.0) max.
.575
(14.6)
max.
ø.343 (8.7)
.312 hex
Note 1
Figure 2
.99 (25.1) max.
.575
(14.6)
max.
ø.343 (8.7)
.312 hex
Note 1
1.19 (30.2) max.
.575
(14.6)
max.
ø.343 (8.7)
.312 hex
Note 1
Figure 4
.575
(14.6)
max.
1.25 (31.8) max.
ø.343 (8.7)
.312 hex
Note 1
Figure 3
Right Angle Plugs (M39012/56)—With Lockwire Holes
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/56-3006 AI Solder 33-10004-000 1
Wedge-Lock 33-10001-004 2
M39012/56-3007 AIISolder 33-10004-005 1
Wedge-Lock 33-10001-000 2
M39012/56-3008 AIV
Solder 33-10005-010 1
Wedge-Lock 33-10001-003 2
M39012/56-3009 AVI
Solder 33-10005-011 1
Wedge-Lock 33-10001-017 2
M39012/56-3010 A VIa Solder 33-10005-012 1
Wedge-Lock 33-10001-002 2
M39012/56B3018 B I X-Crimp 33-10004-000 3
M39012/56B3019 B IIa X-Crimp 33-10004-001 3
M39012/56B3020 B IV X-Crimp 33-10005-000 3
M39012/56B3021 B VIa X-Crimp 33-10005-001 3
M39012/56B3022 B VIb X-Crimp 33-10005-002 3
M39012/56B3023 B VIb X-Crimp 33-10005-003 3
M39012/56B3024 B VIa X-Crimp 33-10005-004 3
M39012/56-3025 C I X-Crimp 33-10007-000 3
M39012/56-3026 C IIa
Econo-Crimp
33-10008-000 4
M39012/56-3027 CIV
Econo-Crimp
33-10009-000 4
M39012/56-3028 C VIb
Econo-Crimp
33-10009-001 4
M39012/56-3029 C VIa
Econo-Crimp
33-10009-002 4
M39012/56-3030 A III Wedge-Lock 33-01001-022 2
M39012/56-3502 D VIb
Econo-Crimp
33-10009-006 4
Figure 1
Right Angle Plugs (M39012/56)—Without Lockwire Holes
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/56-3106 A I Wedge-Lock 33-10001-009 2
M39012/56-3107 A II Wedge-Lock 33-10001-010 2
M39012/56-3108 A IV Wedge-Lock 33-10001-011 2
M39012/56-3109 A VI Wedge-Lock 33-10001-018 2
M39012/56-3110 A VIa Wedge-Lock 33-01001-013 2
M39012/56B3118 B I X-Crimp 33-10004-002 3
M39012/56B3119 B IIa X-Crimp 33-10004-003 3
M39012/56B3120 B IV X-Crimp 33-10005-005 3
M39012/56B3121 B VIa X-Crimp 33-10005-006 3
M39012/56B3122 B VIb X-Crimp 33-10005-007 3
M39012/56B3123 B VIb X-Crimp 33-10005-008 3
M39012/56B3124 B VIa X-Crimp 33-10005-009 3
M39012/56-3125 C I X-Crimp 33-10007-001 3
M39012/56-3126 C IIa
Econo-Crimp
33-10008-002 4
M39012/56-3127 CIV
Econo-Crimp
33-10009-003 4
M39012/56-3128 C VIb
Econo-Crimp
33-10009-004 4
M39012/56-3129 C VIa
Econo-Crimp
33-10009-005 4
M39012/56-3130 A III Wedge-Lock 33-01001-023 2
M39012/56-3602 D VIb
Econo-Crimp
33-10009-007 4
11
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Cable Plugs for Semi-Rigid Cable
• See page 2 for cable groups and
category definitions.
• See pages 21–24 for complete
descriptions and illustrations of
cable attachment types.
Note 1: 3 lockwire holes, .016 (.41)
minimum diameter, equally
spaced.
.575 (14.6)
max.
.63
(16.0)
max.
ø.343 (8.7)
.312 hex Note 1
Figure 2
.63 (15.9)
.312 hex Note 1
Figure 1
Straight Plugs (M39012/79)—With Lockwire Holes
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/79B3001 B XVII Solder-clamp 33-01054-001 1
M39012/79B3002 B XVI Solder-clamp 33-01054-002 1
M39012/79B3003 B XVII Solder-clamp 33-01054-003 1
M39012/79B3004 B XVI Solder-clamp 33-01054-004 1
M39012/79-3007 E XVII Solder-clamp 33-01054-005 1
M39012/79-3008 E XVI Solder-clamp 33-01054-006 1
Straight Plugs (M39012/79)—Without Lockwire Holes
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/79B3101 B XVII Solder-clamp 33-01054-008 1
M39012/79B3102 B XVI Solder-clamp 33-01054-009 1
M39012/79B3103 B XVII Solder-clamp 33-01054-010 1
M39012/79B3104 B XVI Solder-clamp 33-01054-011 1
M39012/79-3107 E XVII Solder-clamp 33-01054-012 1
M39012/79-3108 E XVI Solder-clamp 33-01054-013 1
Right Angle Plugs (M39012/80)—With Lockwire Holes
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/80B3001 B XVII Solder-clamp 33-10006-000 2
M39012/80B3002 B XVI Solder-clamp 33-10006-001 2
M39012/80B3003 B XVII Solder-clamp 33-10006-002 2
M39012/80B3004 B XVI Solder-clamp 33-10006-003 2
M39012/80-3005 E XVII Solder-clamp 33-10006-004 2
M39012/80-3006 E XVI Solder-clamp 33-10006-005 2
M39012/80-3007 E XVII Solder-clamp 33-10006-006 2
M39012/80-3008 E XVI Solder-clamp 33-10006-007 2
Right Angle Plugs (M39012/80)—Without Lockwire Holes
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/80B3101 B XVII Solder-clamp 33-10006-009 2
M39012/80B3102 B XVI Solder-clamp 33-10006-010 2
M39012/80B3103 B XVII Solder-clamp 33-10006-011 2
M39012/80B3104 B XVI Solder-clamp 33-10006-012 2
M39012/80-3105 E XVII Solder-clamp 33-10006-013 2
M39012/80-3106 E XVI Solder-clamp 33-10006-014 2
M39012/80-3107 E XVII Solder-clamp 33-10006-015 2
M39012/80-3108 E XVI Solder-clamp 33-10006-016 2
12
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Cable Jacks for Flexible and Semi-Rigid Cable
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
.96 (24.4) max.
ø.39 (9.9)
Figure 2
.96 (24.4) max.
ø.39 (9.9)
1.05 (26.7) max.
.250 hex
Figure 4
Figure 5
1.27 (32.3) max.
ø.39 (9.9)
Figure 3
Figure 1
.63 (15.9)
.312 hex
Straight Jacks (M39012/81)—for Semi-Rigid Cable
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/81B3001 B XVII Solder-Clamp 33-16003-000 5
M39012/81B3002 B XVI Solder-Clamp 33-16003-001 5
M39012/81B3003 B XVII Solder-Clamp 33-16003-002 5
M39012/81B3004 B XVI Solder-Clamp 33-16003-003 5
M39012/81-3005 E XVII Solder-Clamp 33-16003-004 5
M39012/81-3006 E XVI Solder-Clamp 33-16003-005 5
M39012/81-3007 E XVII Solder-Clamp 33-16003-006 5
M39012/81-3008 E XVI Solder-Clamp 33-16003-007 5
Straight Jacks (M39012/57)—for Flexible Cable
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/57-3006 AI Solder 33-16005-002 1
Wedge-Lock 33-16001-004 2
M39012/57-3007 AIISolder 33-16006-002 1
Wedge-Lock 33-16001-000 2
M39012/57-3008 AIV
Solder 33-16007-002 1
Wedge-Lock 33-16001-003 2
M39012/57-3009 AVI
Solder 33-16008-008 1
Wedge-Lock 33-16001-007 2
M39012/57-3010 A VIa Solder 33-16008-009 1
Wedge-Lock 33-16001-002 2
M39012/57B3011 B I X-Crimp 33-16005-000 3
M39012/57B3012 B IIa X-Crimp 33-16006-000 3
M39012/57B3013 B IV X-Crimp 33-16007-000 3
M39012/57B3014 B VIa X-Crimp 33-16008-000 3
M39012/57B3015 B VIb X-Crimp 33-16008-001 3
M39012/57B3016 B VIb X-Crimp 33-16008-002 3
M39012/57B3017 B VIa X-Crimp 33-16008-003 3
M39012/57B3018 B I X-Crimp 33-16005-001 3
M39012/57B3019 B IIa X-Crimp 33-16006-001 3
M39012/57B3020 B IV X-Crimp 33-16007-001 3
M39012/57B3021 B VIa X-Crimp 33-16008-004 3
M39012/57B3022 B VIb X-Crimp 33-16008-005 3
M39012/57B3023 B VIb X-Crimp 33-16008-008 3
M39012/57B3024 B VIa X-Crimp 33-16008-007 3
M39012/57-3025 C I X-Crimp 33-16009-000 3
M39012/57-3026 C IIa
Econo-Crimp
33-16010-000 4
M39012/57-3027 CIV
Econo-Crimp
33-16010-001 4
M39012/57-3028 C VIb
Econo-Crimp
33-16010-002 4
M39012/57-3029 C VIa
Econo-Crimp
33-16010-003 4
M39012/57-3030 A III Wedge-Lock 33-16001-010 2
M39012/57-3502 D VIb
Econo-Crimp
33-16010-004 4
13
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Panel Jacks for Flexible and Semi-Rigid Cable
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
Note 1: .095 (2.4) maximum panel.
.96 (24.4) max.
.375
(9.5)
.500
(12.7)
.340
(8.6)
ø.344 (8.7) max. ø.102 typ.
Note 1
Figure 2
.96 (24.4) max.
.375
(9.5)
.500
(12.7)
.340
(8.6)
ø.344 (8.7) max. ø.102 typ.
Note 1
1.13 (28.7) max.
.375
(9.5)
.500
(12.7)
.340
(8.6)
ø.255 (6.5) max.
ø.102 typ.
Note 1
Figure 4
Figure 5
1.27 (32.3) max.
.375
(9.5)
.500
(12.7)
.340
(8.6)
ø.344 (8.7) max. ø.102 typ.
Note 1
Figure 3
Figure 1
.375
(9.5)
Note 1
.500
(12.7)
.340
(8.6)
ø.30 (7.6)
ø.102 typ.
.63 (15.9)
Panel Jacks (M39012/82)—for Semi-Rigid Cable
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/82B3001 B XVII Solder-Clamp 33-19004-000 5
M39012/82B3002 B XVI Solder-Clamp 33-19004-001 5
M39012/82B3003 B XVII Solder-Clamp 33-19004-002 5
M39012/82B3004 B XVI Solder-Clamp 33-19004-003 5
M39012/82-3005 E XVII Solder-Clamp 33-19004-004 5
M39012/82-3006 E XVI Solder-Clamp 33-19004-005 5
M39012/82-3007 E XVII Solder-Clamp 33-19004-006 5
M39012/82-3008 E XVI Solder-Clamp 33-19004-007 5
Panel Jacks (M39012/58)—for Flexible Cable
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/58-3006 AI Solder 33-19006-000 1
Wedge-Lock 33-19004-004 2
M39012/58-3007 AIISolder 33-19007-000 1
Wedge-Lock 33-16001-000 2
M39012/58-3008 AIV
Solder 33-19008-000 1
Wedge-Lock 33-19001-003 2
M39012/58-3009 AVI
Solder 33-19009-000 1
Wedge-Lock 33-19001-009 2
M39012/58-3010 A VIa Solder 33-19009-001 1
Wedge-Lock 33-19001-002 2
M39012/58B3011 B I X-Crimp 33-19006-001 3
M39012/58B3012 B IIa X-Crimp 33-19007-001 3
M39012/58B3013 B IV X-Crimp 33-19008-001 3
M39012/58B3014 B VIa X-Crimp 33-19009-002 3
M39012/58B3015 B VIb X-Crimp 33-19009-003 3
M39012/58B3016 B VIb X-Crimp 33-19009-004 3
M39012/58B3017 B VIa X-Crimp 33-19009-005 3
M39012/58B3018 B I X-Crimp 33-19006-002 3
M39012/58B3019 B IIa X-Crimp 33-19007-002 3
M39012/58B3020 B IV X-Crimp 33-19008-002 3
M39012/58B3021 B VIa X-Crimp 33-19009-006 3
M39012/58B3022 B VIb X-Crimp 33-19009-007 3
M39012/58B3023 B VIb X-Crimp 33-19009-008 3
M39012/58B3024 B VIa X-Crimp 33-19009-009 3
M39012/58-3025 C I X-Crimp 33-19011-000 3
M39012/58-3026 C IIa
Econo-Crimp
33-19010-000 4
M39012/58-3027 CIV
Econo-Crimp
33-19010-001 4
M39012/58-3028 C VIb
Econo-Crimp
33-19010-002 4
M39012/58-3029 C VIa
Econo-Crimp
33-19010-003 4
M39012/58-3030 A III Wedge-Lock 33-16001-010 2
M39012/58-3502 D VIb
Econo-Crimp
33-16010-004 4
14
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Bulkhead Jacks for Flexible and Semi-Rigid Cable
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
Note 1: .103 (2.6) maximum panel.
.96 (24.4) max.
.406
(10.3)
ø.390
(9.1) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Note 1
Figure 2
.96 (24.4) max.
.406
(10.3)
ø.390
(9.1) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Note 1
1.13 (28.7) max.
.406
(10.3)
ø.390
(9.1) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Note 1
Figure 4
Figure 5
1.27 (32.3) max.
.406
(10.3)
ø.390
(9.1) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Note 1
Figure 3
Figure 1
.406
(10.3)
ø.390
(9.1) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
.63 (15.9)
Note 1
Panel Jacks (M39012/83)—for Semi-Rigid Cable
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/83B3001 B XVII Solder-Clamp 33-18003-000 5
M39012/83B3002 B XVI Solder-Clamp 33-18003-001 5
M39012/83B3003 B XVII Solder-Clamp 33-18003-002 5
M39012/83B3004 B XVI Solder-Clamp 33-18003-003 5
M39012/83-3005 E XVII Solder-Clamp 33-18003-004 5
M39012/83-3006 E XVI Solder-Clamp 33-18003-005 5
M39012/83-3007 E XVII Solder-Clamp 33-18003-006 5
M39012/83-3008 E XVI Solder-Clamp 33-18003-007 5
Bulkhead Jacks (M39012/59)—for Flexible Cable
Cable Cable Automatic
M39012 P/N Cat. Group Attachment P/N Fig.
M39012/59-3006 AI Solder 33-18006-000 1
Wedge-Lock 33-18001-004 2
M39012/59-3007 AIISolder 33-18007-000 1
Wedge-Lock 33-18001-000 2
M39012/59-3008 AIV
Solder 33-18008-000 1
Wedge-Lock 33-18001-003 2
M39012/59-3009 AVI
Solder 33-18009-000 1
Wedge-Lock 33-18001-010 2
M39012/59-3010 A VIa Solder 33-18009-001 1
Wedge-Lock 33-18001-002 2
M39012/59B3011 B I X-Crimp 33-18006-001 3
M39012/59B3012 B IIa X-Crimp 33-18007-001 3
M39012/59B3013 B IV X-Crimp 33-18008-001 3
M39012/59B3014 B VIa X-Crimp 33-18009-002 3
M39012/59B3015 B VIb X-Crimp 33-18009-003 3
M39012/59B3016 B VIb X-Crimp 33-18009-004 3
M39012/59B3017 B VIa X-Crimp 33-18009-005 3
M39012/59B3018 B I X-Crimp 33-18006-002 3
M39012/59B3019 B IIa X-Crimp 33-18007-002 3
M39012/59B3020 B IV X-Crimp 33-18008-002 3
M39012/59B3021 B VIa X-Crimp 33-18009-006 3
M39012/59B3022 B VIb X-Crimp 33-18009-007 3
M39012/59B3023 B VIb X-Crimp 33-18009-008 3
M39012/59B3024 B VIa X-Crimp 33-18009-009 3
M39012/59-3025 C I X-Crimp 33-18010-000 3
M39012/59-3026 C IIa
Econo-Crimp
33-18011-000 4
M39012/59-3027 CIV
Econo-Crimp
33-18011-001 4
M39012/59-3028 C VIb
Econo-Crimp
33-18011-002 4
M39012/59-3029 C VIa
Econo-Crimp
33-18011-003 4
M39012/59-3030 A III Wedge-Lock 33-18001-013 2
M39012/59-3502 D VIb
Econo-Crimp
33-18011-004 4
15
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
SMA Receptacles
.58 (14.7)
.375
(9.5)
.223
(5.7)
ø.050 (1.3)
ø.102 2 places
ø.030 (.8)
max. wire .481
(12.2)
.625
(15.9)
Figure 2
.58 (14.7)
.375
(9.5)
.500
(12.7)
.340
(8.6)
ø.050 (1.3)
ø.102 4 places
ø.030 (.8)
max. wire
ø.050 (1.3)
ø.161 (4.1)
ø.030 (.8)
max. wire
.103 (2.6) max. panel
.66 (16.8)
.406
(10.3)
.066 (1.7)
ø.505
(12.8) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Figure 3
Figure 6
ø.050 (1.3)
ø.161 (4.1)
ø.030 (.8)
max. wire
.103 (2.6) max. panel
.72 (18.3)
.310
(7.9)
.066 (1.7)
ø.505
(12.8)
.266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Figure 4
Figure 1
.103 (2.6) max. panel
.72 (18.3)
.310
(7.9)
ø.505
(12.8)
.266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
ø.030 (.8)
max. wire
Figure 5
ø.030 (.8)
max. wire
.103 (2.6) max. panel
.66 (16.8)
.406
(10.3)
ø.505
(12.8) .266 (6.8)*
ø.282*
(7.9)
*Mounting hole dimensions
Jack Receptacles (M39012/60 through /62)
M39012 P/N Type Automatic P/N Figure
M39012/60-3001 Panel mount, 4-hole flange, solder pot contact 33-48013-000 1
M39012/60-3002 Panel mount, 2-hole flange, solder pot contact 33-48016-000 2
M39012/61-3001 Bulkhead (rear mount), solder pot contact, with mounting gasket 33-47000-000 3
M39012/61-3002 Bulkhead (front mount), solder pot contact, with mounting gasket 33-49000-000 4
M39012/62-3001 Bulkhead (rear mount), hermetic seal, flattened & pierced contact, with mounting gasket 33-50002-000 5
M39012/62-3002 Bulkhead (front mount), hermetic seal, flattened & pierced contact, with mounting gasket 33-49000-000 6
16
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
.58 (14.7) .266 (6.7)
.093 (2.4) max. panel
.250 hex
ø.034 (.9) max. wire
.177 (4.5)*
ø.192
(4.9)*
*Mounting hole dimensions
.42
(10.7)
.250 hex
.50
(12.7)
.72 (18.3)
.250 hex
SMC Cable Plugs and Receptacles
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of
cable attachment types.
Figure 2
Figure 1
Figure 4
Figure 3
.58 (14.7)
.421
(10.7)
.093 (2.4)
max. panel .250 hex
ø.034 (.9)
max. wire
.177 (4.5)*
ø.192 (4.9)*
*Mounting hole dimensions
(1)
Supersedes M39012/73-0002.
Straight Cable Plugs (M39012/73)
Cable Cable
M39012 P/N Category Group Attachment Automatic P/N Figure
M39012/73-0004 A II Wedge-Lock 46-01000-007 1
(1)
Supersedes M39012/73-0001.
Right Angle Cable Plugs (M39012/75)
Cable Cable
M39012 P/N Category Group Attachment Automatic P/N Figure
M39012/75-0003 A I Wedge-Lock 46-11000-003 2
Jack Receptacles (M39012/77)
M39012 P/N Type Automatic P/N Figure
M39012/77-0001 Bulkhead (rear mount) 20-49001-000 3
M39012/77-0002 Bulkhead (front mount) 20-48001-003 4
17
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
TNC Cable Plugs
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
Note 1: 3 lockwire holes, .027 (.69) minimum diameter, equally spaced.
1.1 (27.9)
ø.50 (12.7)
Note 1 ø.63
(16.0)
Figure 2
Figure 1
1.1 (27.9)
.50
(12.7)
ø.63
(16.0)
Note 1
1.3
(33.1)
.84 (21.3)
ø.50 (12.7)
ø.63 (16)
Note 1
Figure 4
1.4
(35.6)
.84 (21.3)
.50
(12.7)
ø.63 (16)
Note 1
Figure 3
(1) Supersedes M39012/26-0021. (2) Supersedes M39012/26-0104. (3) Supersedes M39012/26-0117.
Straight Cable Plugs (M39012/26)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/26-0010 C VIa Econo-Crimp 80-01011-000 1
M39012/26-0011 C VIb Econo-Crimp 80-01011-001 1
M39012/26-0012(1) C VIIa Econo-Crimp 80-01011-002 1
M39012/26-0013 C IV Econo-Crimp 80-01011-003 1
M39012/26-0014 C VIIb Econo-Crimp 80-01011-004 1
M39012/26-0018 A II Wedge-Lock 80-01001-002 2
M39012/26-0022 C IIa Econo-Crimp 80-01012-000 1
M39012/26-0101(2) A VI Wedge-Lock 80-01001-003 2
M39012/26-0102(3) A VII Wedge-Lock 80-01001-006 2
M39012/26-0103 A IV Wedge-Lock 80-01001-005 2
M39012/26-0501 D IV Econo-Crimp 80-01011-006 1
M39012/26-0502 D V Econo-Crimp 80-01011-007 1
M39012/26-0503 D VIb Econo-Crimp 80-01011-008 1
M39012/26-0504 D VIa Econo-Crimp 80-01011-009 1
(1) Supersedes M39012/30-0021. (2) Supersedes M39012/30-0104. (3) Supersedes M39012/30-0117.
Right Angle Cable Plugs (M39012/30)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/30-0010 C VIa Econo-Crimp 80-10005-000 3
M39012/30-0011 C VIb Econo-Crimp 80-10005-001 3
M39012/30-0012(1) C VIIa Econo-Crimp 80-10005-002 3
M39012/30-0013 C IV Econo-Crimp 80-10005-003 3
M39012/30-0014 C VIIb Econo-Crimp 80-10005-004 3
M39012/30-0022 C IIa Econo-Crimp 80-10006-000 3
M39012/30-0101(2) A VI Wedge-Lock 80-10001-002 4
M39012/30-0102(3) A VII Wedge-Lock 80-10001-005 4
M39012/30-0103 A IV Wedge-Lock 80-10001-004 4
M39012/30-0118 A II Wedge-Lock 80-10001-001 4
M39012/30-0501 D IV Econo-Crimp 80-10005-006 3
M39012/30-0502 D V Econo-Crimp 80-10005-007 3
M39012/30-0503 D VIb Econo-Crimp 80-10005-008 3
M39012/30-0504 D VIa Econo-Crimp 80-10005-009 3
18
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
TNC Cable Jacks and Dust Caps
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
1.2 (30.2)
ø.50 (12.7) ø.56 (14.2)
Figure 2
Figure 1
1.2 (30.5)
.50
(12.7)
(1) Supersedes M39012/27-0021. (3) Supersedes M39012/27-0104.
Straight Cable Jacks (M39012/27)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/27-0010 C VIa Econo-Crimp 80-16004-000 1
M39012/27-0011 C VIb Econo-Crimp 80-16004-001 1
M39012/27-0012(1) C VIIa Econo-Crimp 80-16004-002 1
M39012/27-0013 C IV Econo-Crimp 80-16004-003 1
M39012/27-0014 C VIIb Econo-Crimp 80-16004-004 1
M39012/27-0018 AII V-Groove 80-16003-001 2
Wedge-Lock 80-16001-001 2
M39012/27-0022 C IIa Econo-Crimp 80-16005-000 1
M39012/27-0101(2) AVI V-Groove 80-16003-002 2
Wedge-Lock 80-16001-001 2
M39012/27-0103 A VII V-Groove 80-16003-003 2
Wedge-Lock 80-16001-003 2
M39012/27-0501 D IV Econo-Crimp 80-16004-006 1
M39012/27-0502 D V Econo-Crimp 80-16004-007 1
M39012/27-0503 D VIb Econo-Crimp 80-16004-008 1
M39012/27-0504 D VIa Econo-Crimp 80-16004-009 1
ø.63 (16)
Note 1: 3 lockwire holes,
.027 (.69) min. diameter,
equally spaced.
ø.14 (3.6)
A
.72
(18.3)
Note 1
ø.63 (16)
Note 1: 3 lockwire holes,
.027 (.69) min. diameter,
equally spaced.
.72
(18.3)
Note 1
A
ø.52 (13.2)
Figure 3 Figure 4
Dust Caps (M39012/25)
M39012 P/N Mating Dim. A Chain Automatic P/N Figure
M39012/25-0020 Plug 2.25 (57.2) Bead 10-92001-000 3
M39012/25-0021 Plug 2.70 (68.6) Safety 10-92001-001 4
19
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
TNC Cable Jacks
• See page 2 for cable groups and category definitions.
• See pages 21–24 for complete descriptions and illustrations of cable attachment types.
1.1 (27.9)
.81 (20.6)
ø.50 (12.7)
.688
(17.4) hex
.218*
(5.5)
ø.50*
(12.7)
*Mounting hole
dimensions
.24 (6.1)
max. panel
Figure 2
Figure 1
(1) Supersedes M39012/28-0021. (2) Supersedes M39012/28-0104. (3) Supersedes M39012/28-0117.
Bulkhead Cable Jacks (M39012/28)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/28-0010 C VIa Econo-Crimp 80-18013-000 1
M39012/28-0011 C VIb Econo-Crimp 80-18013-001 1
M39012/28-0012(1) C VIIa Econo-Crimp 80-18013-002 1
M39012/28-0013 C IV Econo-Crimp 80-18013-003 1
M39012/28-0014 C VIIb Econo-Crimp 80-18013-004 1
M39012/28-0018 AII V-Groove 80-18007-000 2
Wedge-Lock 80-18001-000
M39012/28-0022 C IIa Econo-Crimp 80-18010-000 1
M39012/28-0101(2) AVI V-Groove 80-18007-001 2
Wedge-Lock 80-18001-001
M39012/28-0102(3) A VII V-Groove 80-18007-003 2
Wedge-Lock 80-18001-004
M39012/28-0103 AIV V-Groove 80-18007-002 2
Wedge-Lock 80-18001-003
M39012/28-0501 D IV Econo-Crimp 80-18013-006 1
M39012/28-0502 D V Econo-Crimp 80-18013-007 1
M39012/28-0503 D VIb Econo-Crimp 80-18013-008 1
M39012/28-0504 D VIa Econo-Crimp 80-18013-009 1
20
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
TNC Cable Jacks and Receptacles
.69
(17.5)
.50
(12.7)
3–56 tap 4 places
1.1 (27.9)
ø.50 (12.7)
.55
(14.0)
.125 (3.2) max. panel
Figure 2
1.1 (27.9)
.55
(14.0)
.50
(12.7)
.69
(17.5)
.50
(12.7)
3–56 tap 4 places
.125 (3.2) max. panel
Figure 1
(1) Supersedes M39012/29-0021. (2) Supersedes M39012/29-0104. (3) Supersedes M39012/29-0117.
Panel Cable Jacks (M39012/29)
M39012 P/N Category Cable Group Cable Attachment Automatic P/N Figure
M39012/29-0010 C VIa Econo-Crimp 80-19009-000 1
M39012/29-0011 C VIb Econo-Crimp 80-19009-001 1
M39012/29-0012(1) C VIIa Econo-Crimp 80-19009-002 1
M39012/29-0013 C IV Econo-Crimp 80-19009-003 1
M39012/29-0014 C VIIb Econo-Crimp 80-19009-004 1
M39012/29-0018 AII V-Groove 80-19003-001 2
Wedge-Lock 80-19001-000
M39012/29-0022 C IIa Econo-Crimp 80-19010-000 1
M39012/29-0101(2) AVI V-Groove 80-19003-000 2
Wedge-Lock 80-19001-001
M39012/29-0102(3) A VII V-Groove 80-19003-002 2
Wedge-Lock 80-19001-004
M39012/29-0103 AIV V-Groove 80-19003-003 2
Wedge-Lock 80-19001-003
M39012/29-0501 D IV Econo-Crimp 80-19009-006 1
M39012/29-0502 D V Econo-Crimp 80-19009-007 1
M39012/29-0503 D VIb Econo-Crimp 80-19009-008 1
M39012/29-0504 D VIa Econo-Crimp 80-19009-009 1
• See page 2 for cable groups and category
definitions.
• See pages 21–24 for complete descriptions
and illustrations of cable attachment types.
.47
(11.9)
1.1 (27.9)
ø.062 (1.6)
max wire
ø.50
(12.7)
.13 (3.3)
max. panel
.19
(4.8)*
ø.44*
(11.2)
*Mounting hole dimensions
.47
(11.9)
1.2 (30.5)
ø.062 (1.6)
max. wire
ø.50
(12.7)
.26 (6.6)
max. panel
.16
(4.1)*
ø.39*
(9.9)
*Mounting hole dimensions
1.1 (27.9)
ø.31 (7.9)
.63
(16.0)
.20 (5.1) max panel
ø.062 (1.6)
max wire .69
(17.5)
.50
(12.7)
3–56 tap 4 places
Jack Receptacles (M39012/31 and /32)
M39012 P/N Type Automatic P/N Figure
M39012/31-0001 Bulkhead (front mount) 80-46003-000 3
M39012/31-0002 Bulkhead (front mount) 80-46009-000 4
M39012/32-0001 Panel mount 80-48000-000 5
Figure 3 Figure 4
Figure 5
21
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
Cable Attachment Types
Cable Braid
Crimp Sleeve
Contact
Captivation Groove
Cable Dielectric
Cable Center Conductor
Cable Jacket
Body Assembly
Econo-Crimp—Captive Contact
These connectors offer quick assembly time and small size, and feature a
captive contact which snaps into place in the insulator when assembled.
This provides consistent axial contact location within the interface, and
prevents movement of the contact from cable flexure or temperature
changes after assembly.
The cable is stripped and the connector contact soldered to the cable
center conductor. The tail of the body is inserted under the cable braid,
and the crimp sleeve moved into position and crimped.
For additional savings in assembly time, some Econo-Crimp connectors
have contacts that can be crimped to the conductor instead of being
soldered. All Econo-Crimp connectors use readily-available commercial
crimp tools and dies for assembly.
Econo-Crimp connectors can be ordered with heat-shrinkable tubing for
weatherproofing.
Many connectors with Captive Contact Econo-Crimp cable attachment are
qualified to MIL-PRF-39012, Category B (non-field replaceable), Category C
(MIL-defined crimp tools and cable strip dimensions), and Category D
(MIl-defined contact and crimp-sleeve dimensions).
Connector
Parts
As Assembled
Cable Dielectric
Cable Center Conductor
Cable Jacket
Backnut / insulator / contact assembly
Body Assembly
Solder-Clamp (Semi-Rigid Cable)
SMA and other small-size connectors feature simplified solder-
clamp assembly for semi-rigid cable which incorporates a reduced
parts count and captive contact. This design allows right-angle
or chassis-mounted connectors to be re-oriented after cable
attachment to easily conform to system layout.
The cable is stripped and inserted into the backnut / insulator /
contact assembly, and the connector contact soldered to the cable
conductor. The cable jacket (outer conductor) is then soldered to
the backnut. The prepared cable is inserted into the body assem-
bly and the backnut tightened.
The captive contact provides consistent axial contact location
within the interface, and prevents movement of the contact from
cable flexure or temperature changes after assembly.
Some SMA connectors with solder-clamp cable attachment are
qualified to MIL-PRF-39012, Category B (non-field replaceable)
and Category E (MIL-defined cable stripping dimensions).
As Assembled
Connector Parts
22
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
Cable Attachment Types
Cable Braid
Cable Jacket
Wedge cone / Insulator / Contact Assembly
Backnut / Slip Ring / Gasket Assembly
Cable Dielectric
Cable Center Conductor
Body Assembly
Improved Wedge-Lock
This patented attachment system features a captive
contact, quick assembly, and secure cable retention.
The cable braid and jacket are flared over the cone-
shaped wedge, and the backnut captures the braid
and jacket when screwed into the body assembly.
This construction differs from standard Wedge-Lock
in that the braid is clamped directly by the nut and
wedge, providing metal-to metal contact. The cable
jacket is secured in an adjacent area of the backnut
assembly for weatherproofing.
Unlike some similar constructions, the backnut
incorporates a slip ring to prevent twisting of the
cable during assembly.
The cable conductor is soldered to the contact.
Many connectors with Improved Wedge-Lock cable
attachment are qualified to MIL-PRF-39012,
Category A (field replaceable, no special tools
required for assembly).
Connector
Parts
As Assembled
Cable Braid
Cable Jacket
Slip Washer Ferrule
Rear
Insulator
Backnut "V" Gasket
Captivating Washer
Contact
Cable Dielectric
Cable Center Conductor
Body Assembly
V-Groove—Captive Contact
V-Groove clamping with a captive contact provides
consistent axial contact location within the interface,
and prevents movement of the contact from cable
flexure or temperature changes after assembly.
The cable is stripped, and the braid is combed out and
folded back over the ferrule. The connector contact
is soldered to the cable conductor.
The prepared cable, the rear insulator and captivating
washer, the V-gasket, and the slip washer are secured
in the body assembly by tightening the backnut.
The slip washer prevents twisting the cable while the
nut is being tightened, and the rear surface of the
ferrule cuts though the V-gasket, providing metal-to-
metal braid clamping as well as weatherproofing.
Many connectors with Captive Contact V-Groove
cable attachment are qualified to MIL-PRF-39012,
Category A (Field replaceable, no special tools
required for assembly).
Connector
Parts
As Assembled
23
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors
Cable Attachment Types
Cable Braid
Cable Jacket
Crimp Sleeve
Backnut / Crimp Tail /Contact Assembly
Weatherproofing Boot
Cable Dielectric
Cable Center Conductor
Body Assembly
X-Crimp
X-Crimp cable attachment combines ease of assembly with a captivated contact and a silicone-rubber boot* for weatherproofing.
The captive contact is held rigidly in place to prevent movement from cable flexure or temperature changes after assembly.
The cable is trimmed, and the tail of the backnut assembly is pushed under the braid. The contact is soldered to the cable conductor, the
braid crimped within the crimp sleeve, and the backnut assembly screwed into the body. The boot slides forward and snaps into place.
The boots can be supplied in a variety of colors for identification.
Some connectors with X-Crimp cable attachment are qualified to MIL-PRF-39012, Category B (non-field replaceable), and
Category C (MIL-defined crimp tools and cable stripping dimensions).
*SMA and smaller size connectors use heat-shrink tubing instead of silicone-rubber boots.
Connector Parts
As Assembled
24
631/543-5000 • FAX 631/543-5107 • www.automaticconnector.com
Automatic
Connector
MIL-PRF-39012 QPL Connectors
MIL-PRF-39012 QPL Connectors