* * * * * * * Features Regulated Converter Ultra-wide input range 85-528VAC OVC III input rating without additional fuses Operating temperature range: -40C to +80C Overvoltage and overcurrent protected Class II installations (without FG) EMC compliant without external components No load power consumption <0.5W Description The RAC05-K/480 series of 5 watt AC/DC units are specially designed for harsh industrial and outdoor mains conditions. These PCB-mount power supplies are rated to OVC III conditions from 100-480VAC nominal input lines with phase-to-phase or single phase operation without any external components needed. The modules support an operating temperature range from -40C to +80C and come with fully protected outputs as well as EMC class A and B compliance. All these features make them an ideal fit for integration into smart grid, renewable energy, smart metering and IoT applications. AC/DC Converter RAC05-K/480 5 Watt Single Output Selection Guide Part Number RAC05-05SK/480 RAC05-12SK/480 Input Voltage Range [VAC] 85-528 85-528 Output Voltage [VDC] 5 12 Output Current [mA] 1000 420 Efficiency typ (1) [%] 63 65 Max. Capacitive Load (2) [F] 10000 1200 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load Model Numbering RAC05-__ _K/480 Single nom. Output Power IEC/EN62368-1 certified IEC/EN61204 certified EN55032 certified EN55014 certified EN55024 certified EN61000 certified CB Report (pending) Output Voltage Ordering Examples: RAC05-05SK/480 RAC05-12SK/480 www.recom-power.com 5Vout 12Vout Single Output Single Output REV.: 1/2018 PA-1 RAC05-K/480 AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom. Vin= 480VAC 85VAC 120VDC 480VAC 528VAC 745VDC Internal Input Filter Pi type Input Voltage Range (3,4) 400VAC 480VAC Input Current Inrush Current 40mA 35mA 400VAC 480VAC cold start at +25C 18A 20A No load Power Consumption 500mW Input Frequency Range AC Input 47Hz 400VAC/480VAC 0.45 Minimum Load 63Hz 0% Power Factor Start-up Time 25ms Rise Time 20ms 400VAC 480VAC Hold-up Time 150ms 200ms Internal Operating Frequency Output Ripple and Noise 130kHz 400VAC 480VAC 20MHz BW (5) Notes: Note3: Note4: Note5: 50mVp-p The products were submitted for safety files at AC-Input operation Refer to line derating graph on page 4 Measurements are made with a 1.0F MLCC across output (low ESR) Efficiency vs. Load RAC05-12SK/480 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RAC05-05SK/480 60 50 40 30 40 230VAC 400VAC 480VAC 20 10 0 50 30 230VAC 400VAC 480VAC 20 60 10 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] www.recom-power.com 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REV.: 1/2018 PA-2 RAC05-K/480 AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) REGULATIONS Parameter Condition Value Output Accuracy 1.0% max. Line Regulation 0.5% typ. Load Regulation Transient Response Deviation at 400/480VAC 10% to 100% load 1.0% typ. 25% load step change recovery time 4.0% max. 500s typ. RAC05-05SK/480 1 0.5 Deviation [%] Deviation [%] 0.5 0 0 -0.5 -0.5 -1.0 RAC05-12SK/480 1 0 10 20 30 40 50 60 70 80 90 -1 100 0 10 20 Output Load [%] 30 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Type Input Fuse (6) internal Short Circuit Protection (SCP) Value fusible resistor 5W below 100mW hiccup, automatic restart Over Voltage Protection (OVP) 150% - 195%, hiccup mode OVCIII Over Voltage Category Over Current Protection (OCP) 150% - 195%, hiccup mode Class II Class of Equipment Isolation Voltage (7) I/P to O/P I/P to case and O/P to case tested for 1 minute 4kVAC Isolation Resistance 1G min. Isolation Capacitance 100pF max. Insulation Grade reinforced Leakage Current 25A max. Notes: Note6: Refer to local safety regulations if input over-current protection is also required. Recommended fuse type: slow blow Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage ENVIRONMENTAL Parameter Operating Temperature Range Condition @ natural convection 0.1m/s Value full load -40C to +60C refer to derating graph -40C to +80C Maximum Case Temperature +100C Temperature Coefficient 0.05%/K Thermal Impedance 0.1m/s, horizontal (vertical) Operating Altitude Operating Humidity 16K/W 3000m non-condensing 5% - 95% RH max. continued on next page www.recom-power.com REV.: 1/2018 PA-3 RAC05-K/480 AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Condition Value Pollution Degree PD2 Vibration according to MIL-STD-202G 10-500Hz, 2G 10min./1cycle, period 60min. each along x,y,z axes 105 x 103 hours 40 x 103 hours +25C +60C Design Lifetime MTBF +25C +60C according to MIL-HDBK-217F, G.B. >450 x 103 hours >37.5 x 103 hours Derating Graph Line Derating 100 100 90 90 80 80 70 70 Output Load [%] Output Load [%] (@ Chamber and natural convection 0.1m/s) 60 50 40 60 50 40 30 30 20 20 10 10 0 -40 -20 0 20 40 60 80 100 0 120 85 90 Ambient Temperature [C] 528 Input Voltage [VAC] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Audio/video, information and communication technology equipment. Safety requirements A1801438 RoHs 2 Standard IEC62368-1:2014 2nd Edition EN62368-1:2014 + A11:2017 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Low voltage power supplies, d.c. output Part 3: Electromagnetic compatibility (EMC) Standard / Criterion IEC/EN61204-3:2018, Class B Electromagnetic compatibility of multimedia equipment - Emission Requirements EN55032:2015, Class B LCS180508025BE Electromagnetic compatibility of household appliances, electric tools and similar apparatus - Emission Requirements Information technology equipment - Immunity characteristics Limits and methods of measurement EN55014-1:2006+A2:2011 EN55024:2010+A1:2015 Electromagnetic compatibility of household appliances, electric tools and similar apparatus - Immunity Requirements ESD Electrostatic discharge immunity test EN55014-2:2015 air 2, 4, 8kV, contact 2, 4kV 10V/m 80-1000MHz) 3V/m (1.4-2.0GHz) 1V/m (2.0-2.7GHz) AC Power Port: 2.0kV DC Output Port: 2.0kV Radiated, radio-frequency, electromagnetic field immunity test Fast Transient and Burst Immunity AC Power Port: L-N 1.0kV DC Output Port: 0.5kV Surge Immunity AC Power Port: 10V DC Output Port: 10V Immunity to conducted disturbances, induced by radio-frequency fields EN61000-4-2:2009, Criteria B EN61000-4-3:2006+A1:2009, Criteria A EN61000-4-4:2012, Criteria B EN61000-4-5:2014+A1:2017, Criteria B EN61000-4-6:2014, Criteria A continued on next page www.recom-power.com REV.: 1/2018 PA-4 RAC05-K/480 AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) EMC Compliance Condition Power Magnetic Field Immunity 50Hz, 30A/m Voltage Dips and Interruptions Voltage Dips 100% Voltage Dips 60% Voltage Dips 30% Voltage Dips 20% Voltage Interruptions > 95% Standard / Criterion EN61000-4-8:2010, Criteria A EN61000-4-11:2004+A1:2017, Criteria B EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria C Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value case potting PCB baseplate Material black plastic, (UL94V-0) silicone, (UL94V-0) FR4, (UL94V-0) plastic, (UL94V-0 Dimension (LxWxH) 52.5 x 27.4 x 23.0mm Weight 58g typ. Dimension Drawing (mm) 52.5 27.4 embossed logo 51.5 Pin Connections Pin # Single 1 VAC in (N) (L2) 2 VAC in (L) (L1) 3 -Vout 4 +Vout 26.3 23.0 Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 20.32 6.0 1.0 O1.0 +0.15/-0.05 Recommended Footprint Details 1 2 3.39 1 4 18x2.54= 45.72 www.recom-power.com Top View 2. 54 3 10.16 3.50 Bottom View 4 3 2 2.54 REV.: 1/2018 PA-5 RAC05-K/480 AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) INSTALLATION AND APPLICATION Phase to Phase Application Standard L to N Application L L1 L2 L3 N IC1 VACIN (L) VACIN (L) +VOUT VACIN (N) IC1 +VOUT VACIN (N) -VOUT -VOUT Phase Redundancy B6U Application L1 L2 L3 VACIN (L) D0 D1 D2 D3 D4 D5 IC1 +VOUT -VOUT VACIN (N) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 490.0 x 56.0 x 40.0mm Packaging Quantity 15pcs Storage Temperature Range Storage Humidity -40C to +85C non-condensing 20% to 90% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2018 PA-6