2.0x1.25mm SMD CHIP LED LAMP Part Number: KPT-2012SYCK-J3 Super Bright Yellow Features Description z 2.0mm x1.25mm SMT LED,0.75mm thickness. The Super Bright Yellow device is based on light emitting z Low power consumption. diode chip made from AlGaInP. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM9228 REV NO: V.1B DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen PAGE: 1 OF 5 Selection Guide Part No. Dice KPT-2012SYCK-J3 Super Bright Yellow (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 21/2 200 320 120 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAM9228 REV NO: V.1B DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen PAGE: 2 OF 5 Super Bright Yellow KPT-2012SYCK-J3 SPEC NO: DSAM9228 REV NO: V.1B DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen PAGE: 3 OF 5 KPT-2012SYCK-J3 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAM9228 REV NO: V.1B DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen PAGE: 4 OF 5 PACKING & LABEL SPECIFICATIONS KPT-2012SYCK-J3 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAM9228 REV NO: V.1B DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen PAGE: 5 OF 5