DATA SHEET SILICON TRANSISTOR 2SD2403 NPN SILICON EPITAXIAL TRANSISTOR FOR LOW-FREQUENCY POWER AMPLIFIERS AND MID-SPEED SWITCHING The 2SD2403 is a transistor featuring high current capacitance in small dimension. PACKAGE DRAWING (UNIT: mm) This transistor is ideal for DC/DC converters and motor drivers. FEATURES * High current capacitance * Low collector saturation voltage * Complementary transistor with 2SB1572 ABSOLUTE MAXIMUM RATINGS (Ta = 25C) Parameter Symbol Conditions Ratings Unit Collector to base voltage VCBO 80 V Collector to emitter voltage VCEO 60 V Emitter to base voltage VEBO 6.0 V Collector current (DC) IC(DC) 3.0 A Collector current (pulse) IC(pulse) 5.0 A Base current (DC) IB(DC) 0.2 A Base current (pulse) IB(pulse) PW 10 ms duty cycle 50 % 0.4 A 16 cm2 x 0.7 mm ceramic board mounted 2.0 W PW 10 ms duty cycle 50 % Total power dissipation PT Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D16156EJ2V0DS00 (2nd edition) Date Published April 2002 N CP(K) Printed in Japan (c) 2002 1998 2SD2403 ELECTRICAL CHARACTERISTICS (Ta = 25C) Parameter Symbol Conditions TYP. MAX. Unit Collector cutoff current I&%2 V&% = 80 V, I( = 0 100 nA Emitter cutoff current I(%2 V(% = 6.0 V, I& = 0 100 nA DC current gain h)( V&( = 2.0 V, I& = 0.1 A 80 DC current gain h)( V&( = 2.0 V, I& = 1.0 A 100 200 400 - DC base voltage V%( V&( = 2.0 V, I& = 0.1 A 630 670 730 mV - Collector saturation voltage V&(VDW I& = 2.0 A, I% = 0.1 A 150 300 mV Collector saturation voltage V&(VDW I& = 3.0 A, I% = 0.15 A 210 500 mV Base saturation voltage V%(VDW I& = 2.0 A, I% = 0.1 A 0.89 1.2 V Gain bandwidth product f7 V&( = 10 V, I( = -0.3 A 130 MHz Output capacitance CRE V&% = 10 V, I( = 0, f = 1 MHz 30 pF Turn-on time tRQ 150 ns Storage time tVWJ I& = 1.0 A, V&&= 10 V I% = -I% = 0.1 A R/ = 5.0 652 ns 40 ns Fall time tI hFE CLASSIFICATION 2 MIN. Marking GX GY GZ h)( 100 to 200 160 to 320 200 to 400 Data Sheet D16156EJ2V0DS 2SD2403 TYPICAL CHARACTERISTICS (Ta = 25C) Data Sheet D16156EJ2V0DS 3 2SD2403 4 Data Sheet D16156EJ2V0DS 2SD2403 [MEMO] Data Sheet D16156EJ2V0DS 5 2SD2403 * The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4