ZXTP2012Z Green 60V PNP LOW SATURATION MEDIUM POWER TRANSISTOR IN SOT89 Features Mechanical Data BVCEO > -60V IC = -4.3A High Continuous Current RSAT = 32m for a Low Equivalent On-Resistance Low Saturation Voltage VCE(SAT) < -65mV @ IC = -1A hFE Specified Up to -10A for High Current Gain Hold Up Case: SOT89 Case Material: Molded Plastic. "Green" Molding Compound. UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Complementary NPN Type: ZXTN2010Z Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.05 grams (Approximate) Application Emergency Lighting Circuits Motor Driving (Including DC Fans) Backlight Inverters Power Switches Gate Driving MOSFETs and IGBTs SOT89 C E B C C B E Top View Top View Pin Out Device Symbol Ordering Information (Note 5) Part Number ZXTP2012ZTA ZXTP2012Z-13R ZXTP2012ZQTA Notes: Compliance AEC-Q101 AEC-Q101 Automotive Marking 951 951 951 Reel Size (inches) 7 13 7 Tape Width (mm) 12 12 12 Quantity Per Reel 1,000 4,000 1,000 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to https://www.diodes.com/quality/. 5. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. Marking Information 951 ZXTP2012Z Document number: DS33713 Rev. 5 - 2 951 = Product Type Marking Code 1 of 7 www.diodes.com September 2018 (c) Diodes Incorporated ZXTP2012Z Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Base Current Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IB IC ICM Value -100 -60 -7 -2 -4.3 -15 Unit V V V A A A Value 1.5 12 2.1 16.8 83 60 3.23 -55 to +150 Unit W mW/C W mW/C C/W C/W C/W C Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Power Dissipation (Note 6) Linear Derating Factor Power Dissipation (Note 7) Linear Derating Factor Thermal Resistance, Junction to Ambient (Note 6) Thermal Resistance, Junction to Ambient (Note 7) Thermal Resistance, Junction to Leads (Note 8) Operating and Storage Temperature Range Notes: Symbol PD PD RJA RJA RJL TJ, TSTG 6. For a device surface mounted on 25mm x 25mm x 1.6mm FR-4 PCB with high coverage of single sided 1oz copper, in still air conditions; device measured when operating in steady state condition. 7. Same as note (6), except the device is mounted on 50mm x 50mm single sided 1oz weight copper. 8. Thermal resistance from junction to solder-point (on the exposed collector pad). ZXTP2012Z Document number: DS33713 Rev. 5 - 2 2 of 7 www.diodes.com September 2018 (c) Diodes Incorporated ZXTP2012Z Max Power Dissipation (W) VCE(SAT) 10 Limit 1 DC 1s 100ms 10ms 100m o Single Pulse. T =25 C A 1ms 100s 25X25mm PCB 1oz copper 80 1 10 100 50X50mm PCB 1oz copper 1.5 1.0 25X25mm PCB 1oz copper 0.5 0.0 0 20 40 60 80 100 120 140 160 o Temperature ( C) Safe Operating Area Derating Curve 25X25mm PCB 1oz copper 60 D=0.5 40 20 2.0 -VCE Collector-Emitter Voltage (V) o Thermal Resistance ( C/W) 10m 100m Single Pulse D=0.2 D=0.05 0 100 1m D=0.1 10m 100m 1 10 100 1k Max Power Dissipation (W) -IC Collector Current (A) Thermal Characteristics and Derating Information Pulse Width (s) Document number: DS33713 Rev. 5 - 2 o Single Pulse. TA=25 C 25X25mm PCB 1oz copper 10 1 100 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance ZXTP2012Z 100 3 of 7 www.diodes.com Pulse Power Dissipation September 2018 (c) Diodes Incorporated ZXTP2012Z Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Typ -120 -120 -80 -8.1 < -1 -- Max -- -- -- -- -20 -500 Unit V V V V nA nA -- < -1 -- < -1 -20 -500 -10 nA nA nA hFE 100 100 45 10 250 200 90 25 -- 300 -- -- -- Collector-Emitter Saturation Voltage (Note 9) VCE(SAT) -- -14 -50 -75 -160 -20 -65 -110 -215 mV Base-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-on Voltage (Note 9) VBE(SAT) VBE(ON) -- -- -950 -840 -1050 -950 mV mV fT -- 120 -- MHz COBO tON tOFF -- 48 39 370 -- pF -- ns Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current DC Current Transfer Static Ratio (Note 9) Transitional Frequency (Note 9) Output Capacitance Switching Time Note: Symbol BVCBO BVCER BVCEO BVEBO Min -100 -100 -60 -7 ICBO -- ICER R 1k IEBO -- -- Test Condition IC = -100A IC = -1A, RB 1k IC = -10mA IE = -100A VCB = -80V VCB = -80V, TA = +100C VCB = -80V VCB = -80V, TA = +100C VEB = -6V IC = -10mA, VCE = -1V IC = -2A, VCE = -1V IC = -5A, VCE = -1V IC = -10A, VCE = -1V IC = -100mA, IB = -10mA IC = -1A, IB = -100mA IC = -2A, IB = -200mA IC = -5A, IB = -500mA IC = -5A, IB = -500mA IC = -5A, VCE = -1V IC = -100mA, VCE = -10V, f = 50MHz VCB = -10V, f = 1MHz VCC = -10V, IC = -1A, IB1 = -IB2 = -100mA 9. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2%. ZXTP2012Z Document number: DS33713 Rev. 5 - 2 4 of 7 www.diodes.com September 2018 (c) Diodes Incorporated ZXTP2012Z Typical Electrical Characteristics (@TA = +25C, unless otherwise specified.) 1 0.5 o T A=25 C IC/IB=10 -VCE(SAT) (V) -VCE(SAT) (V) 0.4 IC/IB=50 100m IC/IB=20 IC/IB=10 10m 1m 0.3 o 100 C 0.2 o 25 C 0.1 o 10m 100m 1 -55 C 0.0 1m 10 -IC Collector Current (A) 10m VCE(SAT) v IC 1.4 300 1.4 250 1.2 1.0 200 o 0.8 25 C 150 0.6 100 0.4 o -55 C 50 0.2 0.0 1m 10m 100m 1 10 IC/IB=10 10 -VBE(SAT) (V) 100 C Typical Gain (hFE) Normalised Gain 1.2 1 VCE(SAT) v IC VCE=1V o 100m -IC Collector Current (A) o -55 C 1.0 o 25 C 0.8 0.6 o 100 C 0.4 0 1m -IC Collector Current (A) 10m 100m 1 10 -IC Collector Current (A) hFE v IC VBE(SAT) v IC 1.4 1.2 VCE=1V -VBE(ON) (V) o -55 C 1.0 o 25 C 0.8 0.6 0.4 1m o 100 C 10m 100m 1 10 -IC Collector Current (A) VBE(ON) v IC ZXTP2012Z Document number: DS33713 Rev. 5 - 2 5 of 7 www.diodes.com September 2018 (c) Diodes Incorporated ZXTP2012Z Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SOT89 D1 0 .20 c R0 SOT89 Dim Min Max Typ A 1.40 1.60 1.50 B 0.50 0.62 0.56 B1 0.42 0.54 0.48 c 0.35 0.43 0.38 D 4.40 4.60 4.50 D1 1.62 1.83 1.733 D2 1.61 1.81 1.71 E 2.40 2.60 2.50 E2 2.05 2.35 2.20 e 1.50 H 3.95 4.25 4.10 H1 2.63 2.93 2.78 L 0.90 1.20 1.05 L1 0.327 0.527 0.427 z 0.20 0.40 0.30 All Dimensions in mm H E B1 L B e D2 8 (4 X) H1 E2 A L1 D z Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT89 X2 Dimensions Y3 Y1 Y4 X Y C G X X1 X2 Y Y1 Y2 Y3 Y4 G Y2 Value (in mm) 1.500 0.244 0.580 0.760 1.933 1.730 3.030 1.500 0.770 4.530 X1 C ZXTP2012Z Document number: DS33713 Rev. 5 - 2 6 of 7 www.diodes.com September 2018 (c) Diodes Incorporated ZXTP2012Z IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2018, Diodes Incorporated www.diodes.com ZXTP2012Z Document number: DS33713 Rev. 5 - 2 7 of 7 www.diodes.com September 2018 (c) Diodes Incorporated