VS-MUR1020CT-M3
www.vishay.com Vishay Semiconductors
Revision: 02-Aug-17 1Document Number: 96199
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Ultrafast Rectifier, 10 A FRED Pt®
FEATURES
• Ultrafast recovery time
• Low forward voltage drop
• 175 °C operating junction temperature
• Low leakage current
• Designed and qualified according to JEDEC®-JESD 47
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION / APPLICATIONS
VS-MUR.. series are the state of the art ultrafast recovery
rectifiers specifically designed with optimized performance
of forward voltage drop and ultrafast recovery time.
The planar structure and the platinum doped life time
control, guarantee the best overall performance,
ruggedness and reliability characteristics.
These devices are intended for use in the output
rectification stage of SMPS, UPS, DC/DC converters as well
as freewheeling diode in low voltage inverters and chopper
motor drives.
Their extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
PRIMARY CHARACTERISTICS
Package 3L TO-220AB
IF(AV) 2 x 5 A
VR200 V
VF at IF0.87 V
trr typ. See Recovery table
TJ max. 175 °C
Circuit configuration Common cathode
Anode
13
2
Base
common
cathode
2
Common
cathode
Anode
3L TO-220AB
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS
Peak repetitive reverse voltage VRRM 200 V
Average rectified forward current per leg IF(AV)
5
A
total device Rated VR, TC = 149 °C 10
Non-repetitive peak surge current per leg IFSM 50
Peak repetitive forward current per leg IFM
Rated VR, square wave, 20 kHz
TC = 149 °C 10
Operating junction and storage temperatures TJ, TStg -65 to +175 °C
ELECTRICAL SPECIFICATIONS PER LEG (TJ = 25 °C unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Breakdown voltage,
blocking voltage
VBR,
VRIR = 100 μA 200 - -
V
Forward voltage VF
IF = 5 A, TJ = 125 °C - 0.87 0.99
IF = 10 A, TJ = 125 °C - 1.02 1.20
IF = 10 A - 1.12 1.25
Reverse leakage current IR
VR = VR rated - - 10 μA
TJ = 150 °C, VR = VR rated - - 250
Junction capacitance CTVR = 200 V - 8 - pF
Series inductance LSMeasured lead to lead 5 mm from package body - 8.0 - nH
VS-MUR1020CT-M3
www.vishay.com Vishay Semiconductors
Revision: 02-Aug-17 2Document Number: 96199
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Reverse recovery time trr
IF = 1.0 A, dIF/dt = 50 A/μs, VR = 30 V - - 35
ns
IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A - - 25
TJ = 25 °C
IF = 5 A
dIF/dt = 200 A/μs
VR = 160 V
-24-
TJ = 125 °C - 35 -
Peak recovery current IRRM
TJ = 25 °C - 3.3 - A
TJ = 125 °C - 5.0 -
Reverse recovery charge Qrr
TJ = 25 °C - 33 - nC
TJ = 125 °C - 76 -
THERMAL MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Maximum junction and
storage temperature range TJ, TStg -65 - 175 °C
Thermal resistance,
junction to case per leg RthJC --5
°C/W
Thermal resistance,
junction to ambient per leg RthJA --50
Thermal resistance,
case to heatsink RthCS Mounting surface, flat, smooth,
and greased -0.5-
Weight -2.0- g
-0.07- oz.
Mounting torque 6.0
(5.0) -12
(10)
kgf · cm
(lbf · in)
Marking device Case style 3L TO-220AB MUR1020CT
1
10
100
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
V
F
- Forward Voltage Drop (V)
I
F
- Instantaneous
Forward Current (A)
0.1
TJ = 175 °C
TJ = 125 °C
TJ = 25 °C
0.001
0.01
0.1
1
10
100
0 8040 120 160 200
0.0001
VR - Reverse Voltage (V)
IR - Reverse Current (µA)
TJ = 175 °C
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 25 °C
VS-MUR1020CT-M3
www.vishay.com Vishay Semiconductors
Revision: 02-Aug-17 3Document Number: 96199
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
1 10 100 1000
100
10
1
V
R
- Reverse Voltage (V)
C
T
- Junction Capacitance (pF)
TJ = 25 °C
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1
t1 - Rectangular Pulse Duration (s)
ZthJC - Thermal Impedance (°C/W)
1
.
.
PDM
t1
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
Single pulse
(thermal resistance)
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
02468
180
170
160
150
140
130
I
F(AV)
- Average Forward Current (A)
Allowable Case Temperature (°C)
See note (1)
Square wave (D = 0.50)
Rated VR applied
DC
01234 6785
7
4
3
2
1
0
I
F(AV)
- Average Forward Current (A)
Average Power Loss (W)
6
5RMS limit
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
DC
VS-MUR1020CT-M3
www.vishay.com Vishay Semiconductors
Revision: 02-Aug-17 4Document Number: 96199
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
Fig. 9 - Reverse Recovery Waveform and Definitions
160
0
100 1000
Qrr (nC)
dIF/dt (A/µs)
40
80
120
140
20
60
100 IF = 10 A
IF = 5 A
VR = 160 V
TJ = 125 °C
TJ = 25 °C
Q
rr
0.5 I
RRM
di
(rec)M
/dt
0.75 I
RRM
I
RRM
t
rr
t
b
t
a
I
F
di
F
/dt
0
(1)
(2)
(3)
(4)
(5)
(1) diF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve dened by trr
and IRRM
trr x IRRM
2
Qrr =
(5) di(rec)M/dt - peak rate of change of
current during tb portion of trr
VS-MUR1020CT-M3
www.vishay.com Vishay Semiconductors
Revision: 02-Aug-17 5Document Number: 96199
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-MUR1020CT-M3 50 1000 Antistatic plastic tube
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?96154
Part marking information www.vishay.com/doc?95028
2- Ultrafast MUR series
1-Vishay Semiconductors product
3- Current rating (10 = 10 A)
4- Voltage rating (20 = 200 V)
5- CT = center tap (dual) 3L TO-220AB, D2PAK (TO-263AB), TO-262AA
6
Device code
51 32 4 6
VS- MUR 10 20 CT -M3
-M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free
- Environmental digit:
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 13-Jun-2019 1Document Number: 96154
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3L TO-220AB
DIMENSIONS in millimeters and inches
Notes
(1) Dimensioning and tolerancing as per ASME Y14.5M-1994
(2) Lead dimension and finish uncontrolled in L1
(3) Dimension D, D1, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured
at the outermost extremes of the plastic body
(4) Dimension b1, b3, and c1 apply to base metal only
(5) Controlling dimensions: inches
(6) Thermal pad contour optional within dimensions E, H1, D2, and E1
(7) Outline conforms to JEDEC® TO-220, except D2
SYMBOL MILLIMETERS INCHES NOTES SYMBOL MILLIMETERS INCHES NOTES
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
A 4.25 4.65 0.167 0.183 D2 11.68 13.30 0.460 0.524 6, 7
A1 1.14 1.40 0.045 0.055 E 10.11 10.51 0.398 0.414 3, 6
A2 2.50 2.92 0.098 0.115 E1 6.86 8.89 0.270 0.350 6
b 0.69 1.01 0.027 0.040 e 2.41 2.67 0.095 0.105
b1 0.38 0.97 0.015 0.038 4 e1 4.88 5.28 0.192 0.208
b2 1.20 1.73 0.047 0.068 H1 6.09 6.48 0.240 0.255 6
b3 1.14 1.73 0.045 0.068 4 L 13.52 14.02 0.532 0.552
c 0.36 0.61 0.014 0.024 L1 3.32 3.82 0.131 0.150 2
c1 0.36 0.56 0.014 0.022 4 Ø P 3.54 3.91 0.139 0.154
D 14.85 15.35 0.585 0.604 3 Q 2.60 3.00 0.102 0.118
D1 8.38 9.02 0.330 0.355
13
2
C
C
DD
3 x b23 x b
(b, b2)
b1, b3
Lead tip
0.014 AB
MM
0.015 AB
M M
Conforms to JEDEC® outline TO-220AB
(6)
(6)
(6)
L1 (2)
Detail B
Section C - C and D - D
Base metal Plating
(4)
(4)
c1
c
(6)
(6)
Ø P
E
Q
D
L
c
D1
e
e1
2 x
A
B
A
A
A
C
A2
A1
Thermal pad
H1
(E)
(H1)
D2
Detail B
E1
View A - A
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED