VS-MUR1020CT-M3 www.vishay.com Vishay Semiconductors Ultrafast Rectifier, 10 A FRED Pt(R) FEATURES Base common cathode 2 * Ultrafast recovery time * Low forward voltage drop * 175 C operating junction temperature * Low leakage current 3L TO-220AB * Designed and qualified according to JEDEC(R)-JESD 47 2 Common cathode Anode 1 Anode * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3 DESCRIPTION / APPLICATIONS VS-MUR.. series are the state of the art ultrafast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. PRIMARY CHARACTERISTICS Package 3L TO-220AB IF(AV) 2x5A VR 200 V The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. VF at IF 0.87 V trr typ. See Recovery table TJ max. 175 C Circuit configuration Common cathode These devices are intended for use in the output rectification stage of SMPS, UPS, DC/DC converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Peak repetitive reverse voltage TEST CONDITIONS VRRM per leg Average rectified forward current IF(AV) total device Non-repetitive peak surge current per leg IFSM Peak repetitive forward current per leg IFM Operating junction and storage temperatures MAX. UNITS 200 V 5 Rated VR, TC = 149 C 10 A 50 Rated VR, square wave, 20 kHz TC = 149 C 10 TJ, TStg -65 to +175 C ELECTRICAL SPECIFICATIONS PER LEG (TJ = 25 C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS MIN. TYP. MAX. 200 - - IF = 5 A, TJ = 125 C - 0.87 0.99 IF = 10 A, TJ = 125 C - 1.02 1.20 1.25 IR = 100 A IF = 10 A - 1.12 VR = VR rated - - 10 TJ = 150 C, VR = VR rated - - 250 UNITS V Reverse leakage current IR Junction capacitance CT VR = 200 V - 8 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH A Revision: 02-Aug-17 Document Number: 96199 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR1020CT-M3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 50 A/s, VR = 30 V - - 35 IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A - - 25 TJ = 25 C - 24 - - 35 - - 3.3 - - 5.0 - TJ = 125 C Peak recovery current TJ = 25 C IRRM TJ = 125 C IF = 5 A dIF/dt = 200 A/s VR = 160 V UNITS ns A TJ = 25 C - 33 - TJ = 125 C - 76 - MIN. TYP. MAX. UNITS TJ, TStg -65 - 175 C Thermal resistance, junction to case per leg RthJC - - 5 Thermal resistance, junction to ambient per leg RthJA - - 50 Thermal resistance, case to heatsink RthCS - 0.5 - Reverse recovery charge Qrr nC THERMAL MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS Mounting surface, flat, smooth, and greased Weight Mounting torque Marking device C/W - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf * cm (lbf * in) Case style 3L TO-220AB MUR1020CT 100 100 IR - Reverse Current (A) IF - Instantaneous Forward Current (A) TJ = 175 C 10 TJ = 175 C TJ = 125 C TJ = 25 C 1 0.1 0.2 10 TJ = 150 C 1 TJ = 125 C 0.1 TJ = 100 C 0.01 TJ = 25 C 0.001 0.0001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 40 80 120 160 200 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 02-Aug-17 Document Number: 96199 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR1020CT-M3 www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 100 TJ = 25 C 10 1 1 10 100 1000 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 0.1 Single pulse (thermal resistance) 0.01 0.00001 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.0001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.001 0.01 . 0.1 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 7 Average Power Loss (W) Allowable Case Temperature (C) 180 170 DC 160 150 Square wave (D = 0.50) Rated VR applied 140 See note (1) 6 5 RMS limit 4 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC 3 2 1 0 130 0 2 4 6 8 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 0 1 2 3 4 5 6 7 8 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics Revision: 02-Aug-17 Document Number: 96199 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR1020CT-M3 www.vishay.com Vishay Semiconductors 50 160 IF = 10 A IF = 5 A 120 Qrr (nC) trr (ns) 40 30 20 VR = 160 V TJ = 125 C TJ = 25 C 140 IF = 10 A IF = 5 A 100 80 60 40 VR = 160 V TJ = 125 C TJ = 25 C 20 10 100 0 100 1000 1000 dIF/dt (A/s) dIF/dt (A/s) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM di(rec)M/dt (5) 0.75 IRRM (1) diF/dt (1) diF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 9 - Reverse Recovery Waveform and Definitions Revision: 02-Aug-17 Document Number: 96199 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR1020CT-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- MUR 1 2 10 20 CT -M3 3 4 5 6 1 - Vishay Semiconductors product 2 - Ultrafast MUR series 3 - Current rating (10 = 10 A) 4 - Voltage rating (20 = 200 V) 5 - CT = center tap (dual) 3L TO-220AB, D2PAK (TO-263AB), TO-262AA 6 - Environmental digit: -M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-MUR1020CT-M3 QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 50 1000 Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?96154 Part marking information www.vishay.com/doc?95028 Revision: 02-Aug-17 Document Number: 96199 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors 3L TO-220AB DIMENSIONS in millimeters and inches A 0.014 M B A M (6) E A OP Q B A (6) (E) A1 Thermal pad 1 D (H1) H1 C D2 (6) D 2 3 D L1 (2) C (6) c 3xb D1 3 x b2 Detail B Detail B A2 L E1 (6) C (b, b2) Base metal A c1 (4) c 2x e Plating View A - A e1 b1, b3 (4) Section C - C and D - D 0.015 M B A M Lead tip Conforms to JEDEC(R) outline TO-220AB SYMBOL A A1 A2 b b1 b2 b3 c c1 D D1 MILLIMETERS MIN. MAX. 4.25 4.65 1.14 1.40 2.50 2.92 0.69 1.01 0.38 0.97 1.20 1.73 1.14 1.73 0.36 0.61 0.36 0.56 14.85 15.35 8.38 9.02 INCHES MIN. MAX. 0.167 0.183 0.045 0.055 0.098 0.115 0.027 0.040 0.015 0.038 0.047 0.068 0.045 0.068 0.014 0.024 0.014 0.022 0.585 0.604 0.330 0.355 NOTES 4 4 4 3 SYMBOL D2 E E1 e e1 H1 L L1 OP Q MILLIMETERS MIN. MAX. 11.68 13.30 10.11 10.51 6.86 8.89 2.41 2.67 4.88 5.28 6.09 6.48 13.52 14.02 3.32 3.82 3.54 3.91 2.60 3.00 INCHES MIN. MAX. 0.460 0.524 0.398 0.414 0.270 0.350 0.095 0.105 0.192 0.208 0.240 0.255 0.532 0.552 0.131 0.150 0.139 0.154 0.102 0.118 NOTES 6, 7 3, 6 6 6 2 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3, and c1 apply to base metal only (5) Controlling dimensions: inches (6) Thermal pad contour optional within dimensions E, H1, D2, and E1 (7) Outline conforms to JEDEC(R) TO-220, except D2 Revision: 13-Jun-2019 Document Number: 96154 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000