MMBT4401L, SMMBT4401L Switching Transistor NPN Silicon Features * These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS http://onsemi.com Compliant * AEC-Q101 Qualified and PPAP Capable * S Prefix for Automotive and Other Applications Requiring Unique COLLECTOR 3 Site and Control Change Requirements 1 BASE MAXIMUM RATINGS Rating Symbol Value Unit Collector -Emitter Voltage VCEO 40 Vdc Collector -Base Voltage VCBO 60 Vdc Emitter -Base Voltage VEBO 6.0 Vdc IC 600 mAdc ICM 900 mAdc Symbol Max Unit 225 1.8 mW mW/C 556 C/W 300 2.4 mW mW/C RqJA 417 C/W TJ, Tstg -55 to +150 C Collector Current - Continuous Collector Current - Peak 2 EMITTER 3 1 SOT-23 (TO-236) CASE 318 STYLE 6 2 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board (Note 1) @TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate (Note 2) @TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature PD RqJA PD Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. *Transient pulses must not cause the junction temperature to be exceeded. 1. FR-5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. MARKING DIAGRAM 2X M G G 1 2X = Specific Device Code M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping MMBT4401LT1G SMMBT4401LT1G SOT-23 (Pb-Free) 3000 / Tape & Reel MMBT4401LT3G SOT-23 (Pb-Free) 10,000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2011 October, 2011 - Rev. 10 1 Publication Order Number: MMBT4401LT1/D MMBT4401L, SMMBT4401L ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (Note 3) (IC = 1.0 mAdc, IB = 0) V(BR)CEO 40 - Vdc Collector -Base Breakdown Voltage (IC = 0.1 mAdc, IE = 0) V(BR)CBO 60 - Vdc Emitter -Base Breakdown Voltage (IE = 0.1 mAdc, IC = 0) V(BR)EBO 6.0 - Vdc Base Cutoff Current (VCE = 35 Vdc, VEB = 0.4 Vdc) IBEV - 0.1 mAdc Collector Cutoff Current (VCE = 35 Vdc, VEB = 0.4 Vdc) ICEX - 0.1 mAdc 20 40 80 100 40 - - - 300 - - - - 0.4 0.75 0.75 - 0.95 1.2 ON CHARACTERISTICS (Note 3) DC Current Gain (IC = 0.1 mAdc, VCE = 1.0 Vdc) (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 150 mAdc, VCE = 1.0 Vdc) (IC = 500 mAdc, VCE = 2.0 Vdc) Collector -Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) Base -Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) hFE VCE(sat) VBE(sat) Vdc Vdc SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 20 mAdc, VCE = 10 Vdc, f = 100 MHz) fT 250 - MHz Collector-Base Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Ccb - 6.5 pF Emitter-Base Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Ceb - 30 pF Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hie 1.0 15 kW Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hre 0.1 8.0 X 10- 4 Small -Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hfe 40 500 - Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hoe 1.0 30 mmhos (VCC = 30 Vdc, VEB = 2.0 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) td - 15 tr - 20 (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) ts - 225 tf - 30 SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time ns ns 3. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. SWITCHING TIME EQUIVALENT TEST CIRCUITS +30 V +30 V +16 V 0 -2.0 V 1.0 to 100 ms, DUTY CYCLE 2.0% 200 W +16 V 1.0 to 100 ms, DUTY CYCLE 2.0% 200 W 0 1.0 kW < 2.0 ns 1.0 kW -14 V CS* < 10 pF < 20 ns -4.0 V Scope rise time < 4.0 ns *Total shunt capacitance of test jig connectors, and oscilloscope Figure 1. Turn-On Time Figure 2. Turn-Off Time http://onsemi.com 2 CS* < 10 pF MMBT4401L, SMMBT4401L TRANSIENT CHARACTERISTICS 25C 10 7.0 5.0 100C VCC = 30 V IC/IB = 10 Q, CHARGE (nC) 3.0 QT 2.0 1.0 0.7 0.5 0.3 0.2 QA 0.1 10 20 200 50 70 100 30 IC, COLLECTOR CURRENT (mA) 300 500 Figure 3. Charge Data 100 100 IC/IB = 10 70 VCC = 30 V IC/IB = 10 70 tr 50 tr @ VCC = 30 V tr @ VCC = 10 V td @ VEB = 2.0 V td @ VEB = 0 30 20 t, TIME (ns) t, TIME (ns) 50 20 10 10 7.0 7.0 5.0 5.0 10 20 30 50 70 200 100 300 500 10 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 4. Turn-On Time Figure 5. Rise and Fall Times 300 300 500 100 ts = ts - 1/8 tf IB1 = IB2 IC/IB = 10 to 20 VCC = 30 V IB1 = IB2 70 50 t f , FALL TIME (ns) 200 t s, STORAGE TIME (ns) tf 30 100 70 IC/IB = 20 30 20 IC/IB = 10 10 50 7.0 30 5.0 10 20 30 50 70 100 200 300 500 10 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 6. Storage Time Figure 7. Fall Time http://onsemi.com 3 300 500 MMBT4401L, SMMBT4401L SMALL-SIGNAL CHARACTERISTICS NOISE FIGURE VCE = 10 Vdc, TA = 25C; Bandwidth = 1.0 Hz 10 10 IC = 1.0 mA, RS = 150 W IC = 500 mA, RS = 200 W IC = 100 mA, RS = 2.0 kW IC = 50 mA, RS = 4.0 kW 8.0 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 8.0 f = 1.0 kHz RS = OPTIMUM RS = SOURCE RS = RESISTANCE 6.0 4.0 2.0 IC = 50 mA IC = 100 mA IC = 500 mA IC = 1.0 mA 6.0 4.0 2.0 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 f, FREQUENCY (kHz) 0 10 20 50 100 50 100 200 Figure 8. Frequency Effects 500 1.0k 2.0k 5.0k 10k 20k RS, SOURCE RESISTANCE (OHMS) 50k 100k Figure 9. Source Resistance Effects h PARAMETERS VCE = 10 Vdc, f = 1.0 kHz, TA = 25C This group of graphs illustrates the relationship between hfe and other "h" parameters for this series of transistors. To obtain these curves, a high-gain and a low-gain unit were selected from the MMBT4401LT1 lines, and the same units were used to develop the correspondingly numbered curves on each graph. hie , INPUT IMPEDANCE (OHMS) 50k MMBT4401LT1 UNIT 1 MMBT4401LT1 UNIT 2 20k 10k 5.0k 2.0k 1.0k 500 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) Figure 10. Input Impedance 100 7.0 5.0 hoe, OUTPUT ADMITTANCE (m mhos) h re , VOLTAGE FEEDBACK RATIO (X 10 -4 ) 10 MMBT4401LT1 UNIT 1 MMBT4401LT1 UNIT 2 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 50 20 10 2.0 1.0 0.1 5.0 7.0 10 MMBT4401LT1 UNIT 1 MMBT4401LT1 UNIT 2 5.0 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 11. Voltage Feedback Ratio Figure 12. Output Admittance http://onsemi.com 4 5.0 7.0 10 MMBT4401L, SMMBT4401L STATIC CHARACTERISTICS 500 450 h FE, DC CURRENT GAIN 400 VCE = 5.0 V VCE = 2.0 V VCE = 1.0 V TJ = 150C 350 300 25C 250 200 -55C 150 100 50 0 1 0.1 IC, COLLECTOR CURRENT (A) 0.01 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 13. DC Current Gain 1.2 1.0 0.8 IC = 1.0 mA 100 mA 10 mA 300 mA 500 mA 0.6 0.4 0.2 0 0.001 0.01 0.1 1 100 10 IB, BASE CURRENT (mA) 0.35 +0.5 IC/IB = 10 0.30 0 COEFFICIENT (mV/ C) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) Figure 14. Collector Saturation Region 0.25 150C 0.20 25C 0.15 0.10 -55C 0 0.1 0.001 0.01 IC, COLLECTOR CURRENT (A) -0.5 -1.0 -1.5 -2.0 0.05 0.0001 qVC for VCE(sat) -2.5 0.1 0.2 1 Figure 15. Collector-Emitter Saturation Voltage vs. Collector Current qVB for VBE 0.5 50 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 100 200 Figure 16. Temperature Coefficients http://onsemi.com 5 500 MMBT4401L, SMMBT4401L STATIC CHARACTERISTICS 1.0 IC/IB = 10 1.0 VBE(on), BASE-EMITTER TURN ON VOLTAGE (V) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 1.1 0.9 -55C 0.8 0.7 25C 0.6 0.5 150C 0.4 0.3 0.0001 0.001 0.01 0.1 VCE = 2.0 V 0.9 -55C 0.8 0.7 25C 0.6 0.5 0.4 0.3 1 150C 0.0001 IC, COLLECTOR CURRENT (A) 1 8.5 Cobo, OUTPUT CAPACITANCE (pF) Cibo, INPUT CAPACITANCE (pF) 0.1 Figure 18. Base-Emitter Turn On Voltage vs. Collector Current 21 19 17 15 13 11 0 1 2 3 4 5 7.5 6.5 5.5 4.5 3.5 2.5 1.5 6 0 5 Veb, EMITTER BASE VOLTAGE (V) fT, CURRENT-GAIN-BANDWIDTH (MHz) 10 msec 1 sec 0.01 0.001 1 15 20 25 30 35 40 45 50 Figure 20. Output Capacitance vs. Collector Base Voltage 1 0.1 10 Vcb, COLLECTOR BASE VOLTAGE (V) Figure 19. Input Capacitance vs. Emitter Base Voltage IC, COLLECTOR CURRENT (A) 0.01 IC, COLLECTOR CURRENT (A) Figure 17. Base-Emitter Saturation Voltage vs. Collector Current 9 0.001 10 100 1000 VCE = 1.0 V TA = 25C 100 10 0.1 1 10 100 1000 VCE, COLLECTOR EMITTER VOLTAGE (V) IC, COLLECTOR CURRENT (mA) Figure 21. Safe Operating Area Figure 22. Current-Gain-Bandwidth Product http://onsemi.com 6 MMBT4401L, SMMBT4401L PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AP D SEE VIEW C 3 HE E c 1 2 e b 0.25 q A L A1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MILLIMETERS INCHES DIM MIN NOM MAX MIN NOM MAX A 0.89 1.00 1.11 0.035 0.040 0.044 A1 0.01 0.06 0.10 0.001 0.002 0.004 b 0.37 0.44 0.50 0.015 0.018 0.020 c 0.09 0.13 0.18 0.003 0.005 0.007 D 2.80 2.90 3.04 0.110 0.114 0.120 E 1.20 1.30 1.40 0.047 0.051 0.055 e 1.78 1.90 2.04 0.070 0.075 0.081 L 0.10 0.20 0.30 0.004 0.008 0.012 0.35 0.54 0.69 0.014 0.021 0.029 L1 HE 2.10 2.40 2.64 0.083 0.094 0.104 q 0 --- 10 0 --- 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR L1 VIEW C SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT4401LT1/D