1. Product profile
1.1 General description
A 5 W plastic LDMOS power transistor for broadcast transmitter and ISM applications at
frequencies from HF to 1400 MHz.
1.2 Features and benefits
Easy power control
Integrated dual side ESD protection
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation (HF to 1400 MHz)
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
Industrial, scientific and medical applications
Broadcast transmitter applications
BLP10H605
Broadband LDMOS driver transistor
Rev. 4 — 1 September 2015 Product data sheet
Table 1. Application performance
Test signal f VDS PLGpD
(MHz) (V) (W) (dB) (%)
CW 860 50 5 22.4 59.6
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 2 of 11
BLP10H605
Broadband LDMOS driver transistor
2. Pinning information
[1] Connected to flange.
3. Ordering information
4. Limiting values
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
1, 3, 4, 6, 7, 9, 10, 12 n.c.
2 gate1
5 gate2
8drain2
11 drain1
13 source [1]
12
1
7
6
8
5
9
4
10
3
11
2
Transparent top view
aaa-010780
11
8
2
5
13
Table 3. Ordering information
Type number Package
Name Description Version
BLP10H605 HVSON12 plastic thermal enhanced very thin small outline
package; no leads; 12 terminals; body 5 6 0.85 mm
SOT1352-1
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VDS drain-source voltage - 104 V
VGS gate-source voltage 6+11V
Tstg storage temperature 65 +150 C
Tjjunction temperature - 150 C
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 3 of 11
BLP10H605
Broadband LDMOS driver transistor
5. Recommended operating conditions
See application note AN11520 for more details.
6. Thermal characteristics
[1] Rth(j-c) is measured under RF conditions
7. Characteristics
Fig 1. Recommended operating area; case temperature as a function of power
dissipation
aaa-012031
1 1.5 2 2.5 3 3.5 4 4.5 5
50
70
90
110
130
150
P (W)
Tcasecase
Tcase
(°C)(°C)(°C)
Table 5. Thermal characteristics
Symbol Parameter Conditions Typ Unit
Rth(j-c) thermal resistance from junction to case Tcase =80C; PL=5W [1] 5.5 K/W
Table 6. DC characteristics
Tj = 25
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
V(BR)DSS drain-source breakdown
voltage
VGS =0V; I
D=0.06mA 104 - - V
VGS(th) gate-source threshold voltage VDS = 10 V; ID= 6 mA 1.25 1.7 2.25 V
VGSq gate-source quiescent voltage VDS = 50 V; ID= 30 mA 1.35 1.78 2.25 V
IDSS drain leakage current VGS =0V; V
DS =50V--1.4A
IDSX drain cut-off current VGS =V
GS(th) + 3.75 V;
VDS =10V
-0.95-A
IGSS gate leakage current VGS =11V; V
DS =0V--140nA
RDS(on) drain-source on-state
resistance
VGS =V
GS(th) + 3.75 V;
ID= 210 mA
-4580-m
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 4 of 11
BLP10H605
Broadband LDMOS driver transistor
[1] The industrial test method is performed on special hardware to accommodate the requirements of
production. The test results in this table are correlated to correspond with a performance in the application.
8. Test information
8.1 Ruggedness in class-AB operation
The BLP10H605 is capable of withstanding a load mismatch corresponding to
VSWR = 35 : 1 through all phases under the following conditions: VDS =50V;
IDq =30mA; P
L=5W; f=860MHz.
8.2 Test circuit
Table 7. AC characteristics
Tj = 25
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Crs feedback capacitance VGS =0V; V
DS =50V; f=1MHz - 0.07 - pF
Ciss input capacitance VGS =0V; V
DS =0V; f=1MHz - 6.8 - pF
Coss output capacitance VGS =0V; V
DS =50V; f=1MHz - 2.24 - pF
Table 8. RF characteristics
Test signal: CW pulsed; tp=50
s;
= 10 %; f = 860 MHz; RF performance at VDS =50V;
IDq =30mA; T
case =25
C; unless otherwise specified, in a class-AB production test circuit [1].
Symbol Parameter Conditions Min Typ Max Unit
Gppower gain PL= 5 W 20.2 22.4 27.4 dB
Ddrain efficiency PL= 5 W 57 59.6 - %
Printed-Circuit Board (PCB): Rogers RO4350; r= 3.48; height = 0.762 mm; thickness copper
plating = 35 m.
See Table 9 for a list of components.
Fig 2. Component layout
aaa-012032
66.5 mm
33 mm
C8
L1
R2
C7
C6
C3
C2
C5
C4
R1
C1
Q1
C9
+
-
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 5 of 11
BLP10H605
Broadband LDMOS driver transistor
[1] American Technical Ceramics type 100A or capacitor of same quality.
8.3 Graphical data
Table 9. List of components
See Figure 2 for component layout.
Component Description Value Remarks
C1, C4, C7 multilayer ceramic chip capacitor 100 pF [1]
C2 multilayer ceramic chip capacitor 8.2 pF [1]
C3 multilayer ceramic chip capacitor 5.1 pF [1]
C5 multilayer ceramic chip capacitor 1 F, 25 V Murata
GRM31MR71E105KA01L
C6 multilayer ceramic chip capacitor 2.2 pF [1]
C8 multilayer ceramic chip capacitor 1 F, 50 V Murata
GRM32RR71H105KA01L
C9 electrolytic capacitor 220 F, 63 V
L1 wire inductor, 0.8 mm copper wire 2 turn, D = 3 mm
R1 resistor 0 SMD 0805
R2 resistor 10 SMD 0805
Q1 transistor - BLP10H605
VDS = 50 V; IDq = 30 mA; f = 860 MHz. VDS = 50 V; IDq = 30 mA; f = 860 MHz.
(1) PL(1dB) = 37.55 dBm (5.7 W)
(2) PL(3dB) = 38.24 dBm (6.7 W)
Fig 3. Power gain and drain efficiency as function of
output power; typical values
Fig 4. Output power as a function of input power;
typical values
aaa-012033
012345678
17 0
19 20
21 40
23 60
25 80
PL (W)
Gp
Gp
(dB)(dB)(dB)
ηD
ηD
(%)(%)(%)
Gp
Gp
ηD
ηD
P
i
(dBm)
0252010 155
aaa-012034
35
39
31
43
47
PL
(dBm)
27
Ideal PL
(2)
(1)
PL
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 6 of 11
BLP10H605
Broadband LDMOS driver transistor
VDS = 50 V; f = 860 MHz.
(1) IDq = 10 mA
(2) IDq = 20 mA
(3) IDq = 30 mA
(4) IDq = 40 mA
VDS = 50 V; f = 860 MHz.
(1) IDq = 10 mA
(2) IDq = 20 mA
(3) IDq = 30 mA
(4) IDq = 40 mA
Fig 5. Power gain as a function of output power;
typical values
Fig 6. Drain efficiency as a function of output power;
typical values
IDq = 30 mA; f = 860 MHz.
(1) VDS = 30 V
(2) VDS = 35 V
(3) VDS = 40 V
(4) VDS = 45 V
(5) VDS = 50 V
IDq = 30 mA; f = 860 MHz.
(1) VDS = 30 V
(2) VDS = 35 V
(3) VDS = 40 V
(4) VDS = 45 V
(5) VDS = 50 V
Fig 7. Power gain as a function of output power;
typical values
Fig 8. Drain efficiency as a function of output power;
typical values
aaa-012035
012345678
15
17
19
21
23
25
PL (W)
Gp
Gp
(dB)(dB)(dB)
(4)(4)(4)
(3)(3)(3)
(2)(2)(2)
(1)(1)(1)
aaa-012036
0 1 2 3 4 5 6 7 8
0
20
40
60
80
PL (W)
ηD
ηD
(%)(%)(%)
(4)(4)(4)
(3)(3)(3)
(2)(2)(2)
(1)(1)(1)
aaa-012037
012345678
15
17
19
21
23
25
PL (W)
Gp
Gp
(dB)(dB)(dB)
(1)(1)(1)
(2)
(2)(2) (3)
(3)(3) (4)
(4)(4) (5)
(5)(5)
aaa-012038
0 1 2 3 4 5 6 7 8
0
20
40
60
80
PL (W)
ηD
ηD
(%)(%)(%)
(1)(1)(1)
(2)
(2)(2)
(3)
(3)(3) (4)
(4)(4) (5)
(5)(5)
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 7 of 11
BLP10H605
Broadband LDMOS driver transistor
9. Package outline
Fig 9. Package outline SOT1352-1 (HVSON12)
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1352-1 - - -
MO-229
- - -
sot1352-1_po
13-03-26
13-07-16
Unit
mm
max
nom
min
1.00
0.85
0.80
0.05
0.03
0.00
0.2
6.1
6.0
5.9
5.2
5.1
5.0
5.1
5.0
4.9
0.8 4.5 0.1
A
Dimensions (mm are the original dimensions)
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
HVSON12: plastic thermal enhanced very thin small outline package; no leads;
12 terminals; body 5 x 6 x 0.85 mm SOT1352-1
A1b
0.35
0.30
0.25
cD
(1) DhE(1) Eh
2.3
2.2
2.1
ee
1
1.3
e2L
0.5
0.4
0.3
K
1.0
vw
0.05
y
0.05
y1
0.1
0 2.5 5 mm
scale
C
y
C
y1
X
terminal 1
index area
B A
D
E
detail X
AA1
c
terminal 1
index area
Dh
Eh
L
b
e1
e2
eACBv
Cw
6
712
1
K
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 8 of 11
BLP10H605
Broadband LDMOS driver transistor
10. Handling information
11. Abbreviations
12. Revision history
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
Table 10. Abbreviations
Acronym Description
CW Continuous Wave
ESD ElectroStatic Discharge
LDMOS Laterally Diffused Metal-Oxide Semiconductor
HF High Frequency
ISM Industrial, Scientific and Medical
SMD Surface Mounted Device
VSWR Voltage Standing-Wave Ratio
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BLP10H605 v.4 20150901 Product data sheet BLP10H605 v.3
Modifications: •The format of this document has been redesigned to comply with the new identity guidelines
of Ampleon.
•Legal texts have been adapted to the new company name where appropriate.
BLP10H605 v.3 20141002 Product data sheet - BLP10H605 v.2
BLP10H605 v.2 20140418 Objective data sheet - BLP10H605 v.1
BLP10H605 v.1 20140221 Objective data sheet - -
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 9 of 11
BLP10H605
Broadband LDMOS driver transistor
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
BLP10H605#4 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 4 — 1 September 2015 10 of 11
BLP10H605
Broadband LDMOS driver transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
14. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLP10H605
Broadband LDMOS driver transistor
© Ampleon The Netherlands B.V. 2015. All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLP10H605#4
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
15. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Recommended operating conditions. . . . . . . . 3
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 3
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
8 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 4
8.1 Ruggedness in class-AB operation . . . . . . . . . 4
8.2 Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8.3 Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 5
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7
10 Handling information. . . . . . . . . . . . . . . . . . . . . 8
11 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14 Contact information. . . . . . . . . . . . . . . . . . . . . 10
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
