U16D05C U16D60C 1 of 4 © 2006 Won-Top Electronics
Pb
U16D05C – U16D60C
16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER
Features
Glass Passivated Die Construction H
Super-Fast Switching
Low Forward Voltage Drop
Low Reverse Leakage Current S J
High Surge Current Capability
Plastic Material has UL Flammability R K
Classification 94V-O PIN1 2 3
L P
Mechanical Data N
Case: TO-3P, Molded Plastic
Terminals: Plated Leads Solderable per M
MIL-STD-750, Method 2026 A
Polarity: See Diagram B
Weight: 5.6 grams (approx.)
Mounting Position: Any
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. C
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
PIN 1 - +
G D PIN 3 - Case, PIN 2
E
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol U16D
05C U16D
10C U16D
15C U16D
20C U16D
30C U16D
40C U16D
50C U16D
60C Unit
Peak Repetitive Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 150 200 300 400 500 600 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 350 420 V
Average Rectified Output Current @TC = 100°C IO 16 A
Non-Repetiti ve Peak Forward Surge Current 8.3ms
Single half sine-wave superim posed on rated load
(JEDEC Method) IFSM 200 A
Forward Voltage @IF = 8.0A VFM 0.975 1.3 1.7 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 10
500 µA
Reverse Recovery Tim e (Note 1) trr 35 50 nS
Typi cal Junction Capacitance (Note 2) Cj 120 70 pF
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D. C.
WTE
POWER SEM IC ON DUC TOR S
TO-3P
Dim Min Max
A 3.20 3.50
B 4.70 5.30
C — 23.00
D 19.00 —
E 2.80 3.20
G 0.45 0.85
H — 16.20
J 1.70 2.70
K 3.15 Ø 3.65 Ø
L — 4.50
M 5.25 5.65
N 1.10 1.40
P — 2.50
R 11.70 12.70
S 5.00 6.00
All Dimensions in mm
U16D05C U16D60C 2 of 4 © 2006 Won-Top Electronics
50V DC
Approx
50NI(Non-inductive)10 NI
1.0
NI
Oscilloscope
(Note 1)
Pulse
Generator
(Note 2)
Device
Under
Test
t
rr
Settimebasefor5/10ns/cm
+0.5A
0A
-0.25A
-1.0A
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0M , 22pF.
2. Rise Time = 10ns max. Input Impedance = 50 .
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
(+)
(+)
(-)
(-)
0
300
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Maximum Non-Repetitive Surge Current
8.3 ms single half-sine-wave
JEDEC method
100
200
10
100
400
0.1 1.0 10 100
C , CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
T = 25 C
f = 1.0MHz
j
°
U16D50C -
U16D60C
0
4
8
0 50 100 150
I , AVERAGE FORWARD CURRENT (A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C
°
12
16
20
0.1
1.0
10
100
0 0.6 1.2 1.8
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
Pulse width = 300 s
2% duty cycle µ
05C - 20C
30C - 40C
50C - 60C
U16D05C -
U16D40C
U16D05C U16D60C 3 of 4 © 2006 Won-Top Electronics
MARKING INFORMATION
PACKAGING INFORMATION
Tube Size
L x W x H (mm) Quantity
(PCS) Inner Box Size
L x W x H (mm) Quantity
(PCS) Carton Size
L x W x H (mm) Quantity
(PCS) Approx. Gross W eight
(KG)
505 x 46 x 6.5 30 520 x 145 x 95 1,200 540 x 306 x 115 2,400 18.0
RECOMMENDED SCREW MOUNTING ARRA NGEMENT
Note: 1. Anti-static tube, water clear color.
BULK
U16DxxC = Device Num ber
xx = 05, 10, 15, 20, 30, 40, 50 or 60
Polarity = As Marked on Body
Plain Washe
r
Rectifie
r
Insulato
r
Heatsink
6-32 HEX Nut
Recommended isolated mounting when
screw is at heatsink potential. 6-32
hardware is used.
A conical was her s hould be used to
apply proper force to the device. Screw
should not be tightened with any type of
air-forced torqu e or equipment that may
cause high impact on device package.
The interface should apply a layer of
thermal grease or a highly conductive
thermal pad for better heat dissipation.
6-32 HEX Head Scre
w
Conical Washe
r
U16DxxC
U16D05C U16D60C 4 of 4 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
U16D05C TO-3P 30 Units/Tube
U16D10C TO-3P 30 Units/Tube
U16D15C TO-3P 30 Units/Tube
U16D20C TO-3P 30 Units/Tube
U16D30C TO-3P 30 Units/Tube
U16D40C TO-3P 30 Units/Tube
U16D50C TO-3P 30 Units/Tube
U16D60C TO-3P 30 Units/Tube
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. T o order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to part number above. For example, U16D05C-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop.com