U16D05C - U16D60C WTE POWER SEMICONDUCTORS Pb 16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER Features Glass Passivated Die Construction Super-Fast Switching Low Forward Voltage Drop Low Reverse Leakage Current High Surge Current Capability Plastic Material has UL Flammability Classification 94V-O H S J R K PIN1 2 3 L P Mechanical Data Dim A B C D E G H J K L M N P R S N Case: TO-3P, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity: See Diagram Weight: 5.6 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add "-LF" Suffix to Part Number, See Page 4 M A B TO-3P Min Max 3.20 3.50 4.70 5.30 -- 23.00 19.00 -- 2.80 3.20 0.45 0.85 -- 16.20 1.70 2.70 3.15 O 3.65 O -- 4.50 5.25 5.65 1.10 1.40 -- 2.50 11.70 12.70 5.00 6.00 All Dimensions in mm C PIN 1 - G D + PIN 3 - Case, PIN 2 E Maximum Ratings and Electrical Characteristics @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current U16D 05C U16D 10C U16D 15C U16D 20C U16D 30C U16D 40C U16D 50C U16D 60C Unit VRRM VRWM VR 50 100 150 200 300 400 500 600 V VR(RMS) 35 70 105 140 210 280 350 420 V IO 16 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Forward Voltage @IF = 8.0A VFM @TA = 25C @TA = 100C IRM Peak Reverse Current At Rated DC Blocking Voltage @TC = 100C Symbol Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) Cj Operating and Storage Temperature Range 0.975 1.3 1.7 10 500 35 Tj, TSTG A 50 120 nS 70 -55 to +150 V pF C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. U16D05C - U16D60C 1 of 4 (c) 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 20 16 12 8 4 0 0 50 100 100 05C - 20C 50C - 60C 1.0 Pulse width = 300s 2% duty cycle 0.1 0 150 TC, CASE TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 0.6 1.2 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 400 300 Tj = 25C f = 1.0MHz 8.3 ms single half-sine-wave JEDEC method Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 30C - 40C 10 200 100 100 U16D05C U16D40C U16D50C U16D60C 10 0 1 0.1 100 10 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current trr +0.5A 50 NI (Non-inductive) 10 NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0 NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit U16D05C - U16D60C 2 of 4 (c) 2006 Won-Top Electronics MARKING INFORMATION U16DxxC U16DxxC xx Polarity = Device Number = 05, 10, 15, 20, 30, 40, 50 or 60 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 505 x 46 x 6.5 30 520 x 145 x 95 1,200 540 x 306 x 115 2,400 18.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 6-32 hardware is used. 6-32 HEX Head Screw Plain Washer A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. Rectifier Insulator Heatsink Conical Washer The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. U16D05C - U16D60C 6-32 HEX Nut 3 of 4 (c) 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity U16D05C TO-3P 30 Units/Tube U16D10C TO-3P 30 Units/Tube U16D15C TO-3P 30 Units/Tube U16D20C TO-3P 30 Units/Tube U16D30C TO-3P 30 Units/Tube U16D40C TO-3P 30 Units/Tube U16D50C TO-3P 30 Units/Tube U16D60C TO-3P 30 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add "-LF" suffix to part number above. For example, U16D05C-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. U16D05C - U16D60C 4 of 4 (c) 2006 Won-Top Electronics