www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.025/02/13
Transient Voltage Suppressor
Features:
• Glass Passivated Junction
• Low Incremental Surge Resistance, Excellent Clamping Capability
• Low Prole Package With Built-In Strain Relief for Surface Mounted Applications
• 600W Peak Pulse Power Capability with a 10/1,000μs Wave Form, Repetition
Rate (duty cycle): 0.01%
• Very Fast Response Time
• High Temperature Soldering Guaranteed : 250°C/10 seconds at Terminals
Mechanical Data
• Case: JEDEC DO-214AA molded plastic over passivated chip
• Terminals : solder plated, solderable per MIL-STD-750, method 2026
• Polarity : forint-directional types the color band denotes the cathode, which is positive with respect to the anode under
normal TVS operation
• Mounting position : any Weight: 0.002oz, 0.64g
Devices for Bidirectional Applications
For bi-directional devices, use sufx C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions.
Characteristic Symbol Value Unit
Peak power dissipation with a 10/1,000μs waveform
(Note 1,2, Fig.1) PPPM Min. 600 W
Peak pulse current with a 10/1,000μs waveform (Note 1) IPPM See Next Table A
Typical thermal resistance, junction to ambient (Note 2) RθJA 100 °C/W
Peak forward surge current, 8.3ms single half sine-wave uni-directional
only (Note 3) IFSM 100 A
Typical thermal resistance, junction to ambient RθJL 20 °C/W
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C
Maximum Ratings and Thermal Characteristics (TA=25°C unless otherwise noted)
Note:
(1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2.
(2) Mounted on minimum recommended pad layout.
(3) Mounted on 0.2ʺ × 0.2ʺ (5mm × 5mm) copper pads to each terminal.
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.025/02/13
Transient Voltage Suppressor
Electrical Characteristics (TA = 25°C)
Part Number
Dynamic VWM
IRM
IPPM
VC
V @ITVWM IPPM
Min. Max. mA V uA A V
SMBJ10A 11.1 12.3
1
10
5
35.3 17
SMBJ11A 12.2 13.5 11 33 18.2
SMBJ130 144 176 130 2.6 231
SMBJ130A 144 159 130 2.9 209
SMBJ13A 14.4 15.9 13 27.9 21.5
SMBJ160A 178 197 160 2.3 259
SMBJ22A 24.4 26.9 22 16.9 35.5
SMBJ33A 36.7 40.6 33 11.3 53.3
SMBJ48A 53.3 58.9 48 7.8 77.4
SMBJ58A 64.4 71.2 58 6.4 93.6
SMBJ7.0A 7.78 8.6 7 200 50 12
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.025/02/13
Transient Voltage Suppressor
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.025/02/13
Transient Voltage Suppressor
DO-214AA(SMB)
Dim. Min. Max.
A 4.3 4.7
B 3.3 3.7
C2 2.3
D5.05 5.55
E0.1 0.3
F 0.95 1.55
G0.2 Max.
H2.1 2.5
I1.85 2.15
Dimensions : Millimetres
Soldering Footprint
Package Outline Dimensions
Dimensions : Millimetres
Device Package Shipping
SMBJ10A-13-F
SMBJ11CA-13-F
SMBJ130A-13-F
SMBJ130CA-13-F
SMBJ13CA-13-F
SMBJ160CA-13-F
SMBJ22CA-13-F
SMBJ33CA-13-F
SMBJ48A-13-F
SMBJ58A-13-F
SMBJ7.0CA-13-F
DO-214AA(SMB) 3,000 / Tape
& Reel
Package Information
www.element14.com
www.farnell.com
www.newark.com
Page <5> V1.025/02/13
Transient Voltage Suppressor
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Description Part Number
Transient Voltage Suppressor
SMBJ10A-13-F
SMBJ11CA-13-F
SMBJ130A-13-F
SMBJ130CA-13-F
SMBJ13CA-13-F
SMBJ160CA-13-F
SMBJ22CA-13-F
SMBJ33CA-13-F
SMBJ48A-13-F
SMBJ58A-13-F
SMBJ7.0CA-13-F
Part Number Table
